How to uninstall ActiveSync 4.0? - MDA II, XDA II, 2060 General

To successfully uninstall ActiveSync 4.0 and reinstall a previous version of ActiveSync on your desktop PC, perform the following procedure.
1. Uninstall ActiveSync 4.0.
2. Open File Explorer, navigate to the System32 directory in your Windows directory, and then manually delete the dynamic-link library Rapi.dll.
3. Reinstall the previous version of ActiveSync.
i did this and reinstalled 3.7.1 but it will only connect as a "GUEST" any ideas on how to fix this?

What's wrong with version 4.0?
Is there a reason you guys want to downgrade? I hope not, I just upgraded! :?

yeah there is areason for them to downgrade, as i said a while ago WIFI syncing does not work under ma 4, doh! microsoft!
:evil:

Found here:
http://www.aximsite.com/boards/archive/index.php/t-77420.html
I have the same problem but rolling back to 3.8 wasnt possible. every time i try to uninstall 4.0 and install any older version 3.8, 3.7 etc. i cannot seem to open the Active Sync window. The little icon on the tray is there but duoble clicking / "right click open activesync" doesnt do anything.
So I'm stuck with 4.0 do to be able to sync at all.
Anyone figured out how to do wifi sync with 4.0 yet ?
Anyone rolled back without this problem ?
Same problem to me, so I go look the setup log and found this:
Copying static files to C:\WINDOWS\system32\
ceutil.dll - WARNING: not copied (old ver = 4.0.4343.0, source ver = 3.8.0.5004)
rapi.dll - WARNING: not copied (old ver = 4.0.4343.0, source ver = 3.8.0.5004)
Copying static files to C:\Program Files\Common Files\Microsoft Shared\NoteSync Forms
formdll.dll - WARNING: not copied (old ver = 4.0.4343.0, source ver = 3.8.0.5004)
inkform.exe - WARNING: not copied (old ver = 4.0.4343.0, source ver = 3.8.0.5004)
inkprops.dll - WARNING: not copied (old ver = 4.0.4343.0, source ver = 3.8.0.5004)
inkx.dll - WARNING: not copied (old ver = 4.0.4343.0, source ver = 3.8.0.5004)
voicebar.dll - WARNING: not copied (old ver = 4.0.4343.0, source ver = 3.8.0.5004)
voicefrm.exe - WARNING: not copied (old ver = 4.0.4343.0, source ver = 3.8.0.5004)
Copying self-reg files to C:\Program Files\Common Files\Microsoft Shared\NoteSync Forms
vcomctl.dll - WARNING: not copied (old ver = 4.0.4343.0, source ver = 3.8.0.5004)
I copy from the other comp with AS 3.8 those file and it's working again. Here I attach those files. Just override the files. You must disable async from the running process first.
Use Safe Mode in Windows XP.
To extract from MSASYNC.EXE (AC3.8) use i.e.:
MSASYNC.EXE /T:C:\Temp /C
IT IS WORKING!

How to Un-install Active Sync 4.0
As well as all the stuff below (which I followed to the letter) I had a persistent problem when I down-graded from AS4 to AS3.8. It all worked fine, could sync and install/remove programs via USB, Bluetooth and wifi. What I could not do was browse my XDAIIi through Windows Explorer.
When I clicked on the "Mobile Device" icon in Explorer it would highlight it briefly then go back to the directory in had been using before I tried to select the XDA.
I have tracked the problem down to the USB driver installed by AS4 namely wceusbsh.sys which does not get overwritten by the older version in AS3.8.
Using XP, I did a search on wceusbsh.sys in Explorer with "Search Hidden Files" ticked and got 45 hits. There seem to be 3 versions of the file in my system:
4.0.4232.0 - this was installed by AS4 I presume
3.7.1.3244 - this was installed by both AS3.7 and 3.8
1.0.36764.0 - god knows where this came from - maybe an original when I installed XP
If you've down-graded from AS4 to AS3.7 or AS3.8 and the version of wceusbsh.sys in C:\WINDOWS\System32\Drivers folder is 4.0.4232.0 then you have a problem and it's also a pig to get rid of.
At first I tried using Device Mangler (Manager) to uninstall the 4.0.4232.0 dirver but as soon as I reloaded XP is got put back
Next I did an Update Driver > Select From List and manually selected the 3.7.1.3244 version but when I reloaded XP it was back at 4.0.4233.0 again - aaaaagh :evil:
In the end I had to
1. Take the XDA out of the cradle
2. completely uninstall Active Sync
3. restart XP
4. Manually delete all references to wceusbsh.sys that I could (you can't delete them all because some are in system directories and XP won't let you)
5. restart XP again - might not be necessary but I did it anyway
6. Re-install AS3.7
7. Upgrade to AS3.8
It now all works fine - even the explorer browse
BTW - i've just gone back into Device Mangler and checked the Driver details for the PocketPC USB Sync device and the Driver tab says the driver version is back at 4.0.4232.0, but if you click on the Driver Details it reports a version of 3.7.1.3244. XDA is still working fine though.
It's 3 o'clock in the morning, I give up and I'm starting to get that pain behind my eyes again... I hate Microsoft!

Angusmcintyre, that's some great sleuthing there bud.
Did you try using the good-old XP System Restore to roll back to your system state prior to the upgrade to AS4.0?
Codenix.

No too many other things have gone in since the upgrade to AS4.0 to make it worthwhile

Yes, that's often the case. It's a shame you can't be more selective with the restore points, but that's where 3rd-party uninstallers come in I suppose.
Thanks for sharing your findings - I was planning to upgrade to AS4.0 until I read all this, which would have sucked since I only just ordered a WiFi card :lol:
Codenix.

Yes, that's often the case. It's a shame you can't be more selective with the restore points, but that's where 3rd-party uninstallers come in I suppose.
Thanks for sharing your findings - I was planning to upgrade to AS4.0 until I read all this, which would have sucked since I only just ordered a WiFi card :lol:
Codenix.

Related

Wifi Companion working on Wizard?

pschoch said:
Socket SDIO WLAN Tools works now! Hanza found out that the smartphone version works on Magneto!
Get it here:
http://www.socketcom.com/support/redirect.asp?URL=ftp://ftp.socketcom.com/wlan/SDIO_WLAN_Sagem.exe
Click to expand...
Click to collapse
Download the Wifi Companion software here
http://www.socketcom.com/support/support_wlan.asp?Type=WiFi
I used the cab file (i has a 3 day trail)
Install the Wlan tools en then install Wifi companion.
Softreset and then put your Wifi on with the Commmanager.
The start Wifi Companion and it must work.
I'm still testing if everything is working OK.
So tried it on your own risk.
If you install Wifi Companion alone you get a error message that he is missing files from Wlantools.
If you remove Wlantools it's not working anymore.
Working for me.
French Rom, and no problem.
More graphical and UI based than Cirond that I used before.
Martinlbb
First test ... looks great.
But I get the following error on start-up: "ActivateDevice failes, code 964 hex". Could be that it throws that error when WLAN is still in off mode when rebooting. Can I keep the WLAN to autoconnect at startup?
But ... costs 25$ ... that's much for a little utility.
you should be getting the error unless you copied a DLL file to make it a full version (or used the wrong version) :wink:
when using the CAB file it works great, for 3 days
I tried installing the SDIO_WLAN_Sagem.exe but it gives me errors when executing it.
Then I installed the wifi companion cab :
Wi-Fi Companion for Windows Mobile 5.0 Drivers and Software (Advanced Users Only)
Select #1. CAB file for Windows 2005.
1.2 MB
and after soft reset all I got was a blocked popup windows (couldn't see the message)
next thing, hard reset
Using just the CAB file works perfectly.
the problem is that most download an other version and use the wrong CAB file or DLL File.
Just install the software without any extra drivers (do not install the SDIO software, only the compagnion)
PS most DLL files out there are for windows 2003 version and do not work

USB Drivers for Vista

Hi
As explained here:
http://wiki.xda-developers.com/index.php?pagename=BA_USBModem
The driver won't load under Vista with an error "can't find specified file", it looks like the usbser.sys file is missing in Vista.
Has anyone succeeded in getting the TyTN working as a USB modem?
With HSDPA speed, bluetooth isn't fast enough
Maximum speed I've been able to achieve over bluetooth is about 400kbit/s while over USB I can easily get over 1.1Mbit/s
I got it to work in Beta 2 & RC1 but since RC2 I get the same error
I have the same error.
It worked in Beta 2 and RC1 OK, but not in RC2. The error is 'can't find specified file' as noted above.
No one found a solution yet ???
kittiyut said:
No one found a solution yet ???
Click to expand...
Click to collapse
I'm having the same problem after doing a fresh install of build 5744. I had it working on the system before - upgraded from RC1 to 5744, so evidently there is something missing in 5744 that breaks this if installed from scratch.
/POL
here is the same error in 5840, i will wait until RTM version to test it again
guys have you tried installing it while logged in as the 'Administrator' not a different username just added to the Administrators group because as you all know applications being installed are run as standard 'User' privlages until installed by the default 'Administrator' account.
try that and let me know...
Got it working for Vista RC2
You have to first read http://support.microsoft.com/kb/837637 and change your driver INF file accordingly. I have a version of the P2K driver file that recognizes the motorola V360 which I'm attaching for ilustration purposes.
Hope this helps...
Working on Vista RC2 Build 5744
Thanks for that. It's now working in my version of Vista (this post is written whilst using the USB connection).
I used the files attached which I tweaked thanks to xargons17's note.
My tweaks included changing the following so I could check the correct driver was being installed:
[Strings]
PROV = "HTC"
USB\Vid_045E&Pid_0079.DeviceDesc = "RAV Hermes WM5 USB Modem"
USBFilterString ="RAV Hermes WM5 Modem Driver"
and it involved changing the following reference (commenting out usbser.sys,,,0x20):
[UsbModemFiles]
;usbser.sys,,,0x20
;
; Explicitly states the usbser.sys should not be taken from the CD/Disk
;
When installing always choose 'Let Me Pick From A List of Device Drivers On My Computer' option. And choose 'Have Disk' to navigate to the attached .inf file. The device being installed should be the 'RAV Hermes WM5 Modem Driver' or whatever you decide to call it in the [Strings] section. I changed the strings name so I could be certain I was selecting the correct driver/device.
This assumes that the file usbser.sys has been copied to c:\windows\system32 folder as this is hardcoded in the usbmdm.inf file attached. Make sure you have the usbser.sys in that folder before attempting to install.
Hope that's helpful to somebody else.
USB Modem
I had the same problem and ended up buying PDANet which works great! www.junefabrics.com/palmnet/
rav your download is corrupt!!! i am having problems installing the file. not working in vista....
file not working
I tried downloading that file that you had already modded but it was a corrupt zip file. please repack!
another file
I created my own file and works fine on Vista RTM, This file assumes that the usbser.sys is under c:\windows\system32
Here are the files again.
rav said:
Here are the files again.
Click to expand...
Click to collapse
Still seems corrupt.
I've just checked from another PC and can download and open the zip file fine. Have others downloaded successfully?
rav said:
Thanks for that. It's now working in my version of Vista (this post is written whilst using the USB connection).
I used the files attached which I tweaked thanks to xargons17's note.
My tweaks included changing the following so I could check the correct driver was being installed:
[Strings]
PROV = "HTC"
USB\Vid_045E&Pid_0079.DeviceDesc = "RAV Hermes WM5 USB Modem"
USBFilterString ="RAV Hermes WM5 Modem Driver"
and it involved changing the following reference (commenting out usbser.sys,,,0x20):
[UsbModemFiles]
;usbser.sys,,,0x20
;
; Explicitly states the usbser.sys should not be taken from the CD/Disk
;
When installing always choose 'Let Me Pick From A List of Device Drivers On My Computer' option. And choose 'Have Disk' to navigate to the attached .inf file. The device being installed should be the 'RAV Hermes WM5 Modem Driver' or whatever you decide to call it in the [Strings] section. I changed the strings name so I could be certain I was selecting the correct driver/device.
This assumes that the file usbser.sys has been copied to c:\windows\system32 folder as this is hardcoded in the usbmdm.inf file attached. Make sure you have the usbser.sys in that folder before attempting to install.
Hope that's helpful to somebody else.
Click to expand...
Click to collapse
I don't get the 'Let Me Pick From A List of Device Drivers On My Computer' option. Windows automatically install the default driver. Even if I uninstall the default driver it still intalls it with out giving me the oprion to pick.
Vista USB driver problem
I am also having trouble with Vista USB driver & usbser.sys.
Can anyone please advise on modifying my .inf file?
; Windows USB SID Setup File
; Copyright (c) 2000 Microsoft Corporation
; Copyright (C) 2005 Plescon Ltd
[Version]
Signature="$CHICAGO$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%MCHP%
LayoutFile=layout.inf
DriverVer=08/17/2001,5.1.2600.0
[Manufacturer]
%MFGNAME%=DeviceList
[DestinationDirs]
DefaultDestDir=12
[DeviceList]
%DESCRIPTION%=DriverInstall, USB\VID_ffff&PID_32a3
;------------------------------------------------------------------------------
; Windows 2000/XP Sections
;------------------------------------------------------------------------------
[DriverInstall]
CopyFiles=DriverCopyFiles
AddReg=DriverInstall.AddReg
[DriverCopyFiles]
usbser.sys
[DriverInstall.AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,"usbser.sys"
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
[DriverInstall.HW]
AddReg = DriverInstall.AddRegHW
[DriverInstall.AddRegHW]
HKR,,PortName,0x00000020,"COM4"
[DriverInstall.Services]
AddService=psp_usbser, 0x00000002, DriverService
[DriverService]
DisplayName=%SERVICE%
ServiceType=1
StartType=3
ErrorControl=1
ServiceBinary=%12%\usbser.sys
;------------------------------------------------------------------------------
; String Definitions
;------------------------------------------------------------------------------
[Strings]
MCHP="Plescon Ltd"
MFGNAME="Plescon Ltd"
DESCRIPTION="USB SID"
SERVICE="USB Scanner Controller"
Easy as ABC to resolve Vista USB problem..
Hi guys, I have been having lots of prblem with USB devices ( pen drive, USB portable HDD, IDE-USB HDD, USB MODEM, PDAs etc.. ) but I have found a simple way to resolve all my problem then going thru different ways to resolve issues caused by different devices..
Please read below:
Special Thanks to: http://teknobabble.wordpress.com/20...ems-installing-a-usb-media-reader-a-solution/
Problem:
•In C:\Windows\System32\DriverStore\FileRepository I had two folders named “usbstor.inf” but each one had a different set of numbers attached to the end of the folder name. <- could this be where part of the problem lies?
•When I looked in my C:\Windows\inf folder I discovered the usbstor.inf and usb stor.pnf files were missing <- this definitely had to be an issue.
Once I discovered these anomalies, I proceeded to copy the pnf and inf files from the most recently updated usbstor.inf folder to C:\Windows\inf. I then went back to the update driver wizard, pointed to the inf folder and what do you know but they all started working again.
So with some scepticism I tried this approach and it worked.
I have also attached a ZIP(.doc) file with screen shot for easier reference.
Hope this helps everyone....
Apology for the late reply.
I attached more files to share.
-=SAVE THE WORLD=-
Hi!
I followed all hints, but it doesn't work. The driver can not be installed says Vista. Files are placed in the correct folders.
HTC has release a zip with the drivers, but i can't find it on the web, does anyone have it and could post it?
Thanks
Wonko

Touchscreen not working - Help

Hello,
the Touchscreen of my Shift is not working after i updated to Vista Enterprise Edition. Is there someone that can send me an image of the expanded device manager?
Thank you!
Can you be more specific?
Does it work in Snapvue?
Huib
Same here!
After update to Ultimate or Enterprise version the touch screen does not work within Vista. Works without problem on the snapvue side.
Native HTC Pen Driver missing / not installed.
Have you checked windows update? It offered me an updated HID input touch screen driver a few days ago.
Yes if checked windows update, all update are installed.
HTC gave me this answer:
Dear Customer,
We can not send the drivers yet because only the developers team in Taiwan has got them and they are not redistributing them at the moment. However, you should be able to go back to Vista Business if you perform a "hard reset". When you switch on the shift, if you press and hold FN key and then the number 3, it will show up a recovery utility which should take your device back to factory default settings.
I am wondering if reseting the device is there only solution ?
Vista drivers
I solve similar problem with localized VISTA bussines.
http://forum.xda-developers.com/showthread.php?t=376600
I did it succesfully except WiFi driver.
It was a hard work !
-First time I installed original Vista bussines from hidden partition.
-I extracted ALL original drivers from installed system by All DRIVERMAX and DriverGenius App. (here are PEN drivers !!!)
-I copied them to Backup directory with
full Program Files directory
WINDOWS\WINDOWSMOBILE directory
WINDOWS\SYSTEM32\DRIVERS
WINDOWS\SYSTEM32\DRIVERSTORE
WINDOWS \SYSTEM32\1.REG
BT.REG
ENABLEUAC.REG
D.REG
DE.REG
DS.REG
-------------------------------------------------------------
-Install new localized VISTA. (do not erase or format old VISTA! - it stay in WINDOWS.OLD directory.)
-DO first boot, but do not start VISTA system !
-Boot from BartPE disk and
-copy from backed Program Files directory
to same newVISTA ProgramFiles these dirs:
HTC
FingerPrintSensor
TrendMicro
VitaKey
-copy backed WINDOWS\WINDOWSMOBILE to same newVISTA directory (do not replace the same names, copy only missing files)
-copy backed SYSTEM32\DRIVERS to same newVISTA directory (do not replace the same names, copy only missing files)
-copy backed SYSTEM32\DRIVERSTORE to same newVISTA directory
(do not replace the same names, copy only missing files)
-copy backed SYSTEM32\REGs to same newVISTA directory
-Do boot to newVista.
-Install DriverMax and DriverGenius and import by them all backed drivers.
-Do Restart.
-Install drivers from web: INTEL, VGA,SYNAPTICS,SOUND...
-Do Restart.
-Run 1.reg (it will install all other REGs)
-Do Restart.
-Automatic install will start - Origami, ControlCenters....
-set buttons on side of display:
http://forum.xda-developers.com/showthread.php?t=378650
-Run downloaded from MS web:
MicroSoft HotFix KB934796(USB)
http://support.microsoft.com/kb/934796
MicroSoft HotFix KB929761(WUSA)
http://support.microsoft.com/kb/929761
MicroSoft HotFix KB936825(SD)
http://support.microsoft.com/kb/936825MicroSoft HotFix KB934796(USB)
-Run Vitakey for FingerPrint security
All apps and all drivers (not WiFi) are installed.
And thats all folks.
Please let me know If You will have WiFi driver installer.
Is it Marvell SDIO SD8686 WiFi driver and is not possible to import it by DriverMax or Genius.
Here's the SD8686 driver - http://forum.xda-developers.com/showthread.php?p=2108992#post2108992.
NuClear235 said:
I solve similar problem with localized VISTA bussines.
http://forum.xda-developers.com/showthread.php?t=376600
I did it succesfully except WiFi driver.
It was a hard work !
-First time I installed original Vista bussines from hidden partition.
-I extracted ALL original drivers from installed system by All DRIVERMAX and DriverGenius App. (here are PEN drivers !!!)
-I copied them to Backup directory with
full Program Files directory
WINDOWS\WINDOWSMOBILE directory
WINDOWS\SYSTEM32\DRIVERS
WINDOWS\SYSTEM32\DRIVERSTORE
WINDOWS \SYSTEM32\1.REG
BT.REG
ENABLEUAC.REG
D.REG
DE.REG
DS.REG
-------------------------------------------------------------
-Install new localized VISTA. (do not erase or format old VISTA! - it stay in WINDOWS.OLD directory.)
-DO first boot, but do not start VISTA system !
-Boot from BartPE disk and
...
Please let me know If You will have WiFi driver installer.
Is it Marvell SDIO SD8686 WiFi driver and is not possible to import it by DriverMax or Genius.
Click to expand...
Click to collapse
Doesn't worked for me.
Touchscreen still not working under Vista Ultimate.
I've tried with full version, with Anytime with new HD... (about 5 times)
Any idea???
Ommog said:
Doesn't worked for me.
Touchscreen still not working under Vista Ultimate.
I've tried with full version, with Anytime with new HD... (about 5 times)
Any idea???
Click to expand...
Click to collapse
I am with Vista Ultimate too and touchsreen is not working neither buttons on side of the display...
any help please?

SD Card not working on XP?

Hello everybody,
Is it possible that the SD Card's are not working on XP?
I have an entry in my device manager. But if I insert a SD Card it wont work.
Regards,
CodeX2k
XP on the shift reads my smaller cards, 1gb and 4gb, but not my 16gb sdhc. There is an XP sdhc patch available from microsoft, but it made no difference on my shift.
Mine reads 16.
Only after hibernate/sleep I often loose any sd card and I get an error in my device manager.
Huib
Stupid me!
Did not see the XP!
Apologizes pls
Stupid me!
Did not see the XP!
Apologizes pls
Huib
Right now I can't test if the smaller cards are working. I only have a 16GB SDHC Class 6 with me in my holidays...
Did anyone get SDHC Cards working on XP?
I have the same problem when I installed the XP, SD slot won't read 16G,
But 16G SD card works with my USB card reader. Touch screen also won't work so gave up XP, restored Vista.
Only things won't work for me on XP are SDHC, Resolution Change and the HTC Utility all others works just fine ahhh and Touchscreen Calibration.
Hi @all
***EDIT***
I test now some other drivers, and see: It is really necessary, that you really right update the sdbus driver. I use this one:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67470
and force this driver to update, then if you want to update this driver normally, then the device manger tells you, that no other driver is newer than the installed.
But: I install again from scratch and test a little bit.
I think it is really related to the sdio driver problem when you want to install the WLAN.
But i´m not really shure, it is the right driver.
later more ;-)
*** old ***
SDHC don´t work to by my side. (test with 8GB kensigton) Normal SD e.g. 512MB Cards works.
I comparing the drivers with a other Notebook and i See, on HTC Shift the Driver is originaly from Microsoft build date 10-01-2002. My other Notebook has an driver from 2006 and from company O2Micro.
maybe that´s the Problem. Anybody knows what is the manufacturer of the SD Card Slot?
Can anybody send me the *.inf files from a Vista installed machine? Or have a look to the devicemanager of Vista, which driver is installed?
Additional I See: the driver sdbus.sys located in c:\windows\system32\drivers is the Version 6.0.5308.17 (with SP3) and is newer than the SDHC Hotfix that you can download from Microsoft...
Hmm. crazy..
see here the Microsoft Hofix link: (BTW: there a other hotfixes for SDHC Issues downloadable from MS too)
http://support.microsoft.com/kb/923293/en-us
It doesn't appear to be limited just to the Shift: http://forum.xda-developers.com/showthread.php?t=366570
It appears that the hotfix won't work and even the sp3 unless there's a specific fix/driver for the Shift, since Shift is not supported with XP officially, there wouldn't be one from HTC.
P.S. 16GB doesn't work on mine either. Still, not enough to make me go back to the ultra-slow Vista
Hi Doni,
thank you, really interesting. As I install a blank Windows XP SP3 from CD on shift (without additional drivers) , my Kingston 8GB SDHC Card works. (the first time I inserting my SDHC I become a blue screen) but after restart it works.
I think, the SD Card Reader device of Shift is a standard product, that build into other PC´s too, only the way to find out that that´s is the problem
I have some backup´s from my installation and can go back, so I will try it, at which time it has works..
see
http://forum.xda-developers.com/showthread.php?t=438820
###edit: ###
I test it with fallback to my older backups.
SDHC works, before I Installed the SDBUS.sys driver that is needed to become WLAN functionality. So I think, we must look for a other sdbus.sys driver (file) ?
I'm assuming then that WLAN doesn't work with the SP3 sdbus.sys, right? And the version that does, doesn't work for SDHC. Nice I suppose we need one that does both.
Hi Doni,
i have searched some hours for a solution.
to track the problem was a Everun UMPC http://www.raondigital.com/fnt_english/ev01.asp
essential, where we have stolen the sdbus.sys driver.
If you go there to the support and driver download you see, there is only the "sdbus.sys".
Really interesting, "how to" the normal user can change this file
normally is in a driver package (*.sys) always a *.inf file included, what I missed.
When you change only the *.sys file, maybe you can have problems with it, sometimes, there a difficult or other settings stored in Registry to control this driver.
And this is the problem I´m think. We need an officical *.inf (maybe installed) file from a Raon Everun UMPC.
I install at the moment Vista on shift to fetch the SD Bus settings from Vista side, maybe I become like Jesus and see the holy spirit.. (sorry, only joking)
I think the sdbus drivers of WXP-SP3 are ok, but you need some registry tweaks to control that right. Maybe the *.inf from Vista tell it me.
BTW: I don´t need the sdbus.sys from RAON within my precomiled WXP TPC SP3. WLAN works with the original sdbus.sys as well.
And that´s it: I try this way. Next week I´m on a Business trip, long time in lonesome hotels with long nights..
Always with a 16GB USB Stick and Acronis on it to recover. What need a man more in the City Jungle?
))
bg Joy
BTW:
WXP SP3 Driver Version 6.0.4069.5 from 2008-10-01 (Y-M-D) (sdbus.sys 6.0.4069.5512 (080413-2111)
Vista (org HTC) Version 6.0.6000.16478 from 2006-06-21 6.0.6000.16478 (vista_gdr.070427-1615)
Vista with SP1 Version 6.0.6000.18000 from 2006-06-21 6.0.6001.18000 (longhorn_rtm.080118-1840)
if you use that in a *.inf file
(make a new inf file with texteditor and copy lines above into it)
than you can install the raeon sdbus.sys driver
normally without windows safe mode...
;Copyright (c) 2002 Microsoft Corporation
[Version]
Signature="$Windows NT$"
Class=SDHost
ClassGUID={a0a588a4-c46f-4b37-b7ea-c82fe89870c6}
Provider=%Msft%
;LayoutFile=layout.inf
;DriverVer=10/01/2002,6.0.4069.1
DriverVer=06/28/2006,6.0.5308.17
;
; Information for installing the SD class
;
[ClassInstall32]
AddReg=ClassAddReg
CopyFiles = ClassCopyFiles
[ClassAddReg]
HKLM,System\CurrentControlSet\Control\CoDeviceInstallers,{a0a588a4-c46f-4b37-b7ea-c82fe89870c6},0x00010008, "sdhcinst.dll,SdClassCoInstaller"
HKR,,,,%SDClassName%
HKR,,Icon,,"2"
HKR,,Installer32,%REG_SZ%,"sdhcinst.dll,SdClassInstall"
HKR,,NoInstallClass,,1
[ClassCopyFiles]
sdhcinst.dll
;
; List of manufacturers and devices
;
[Manufacturer]
%Generic%=Generic
%TED%=TED
%TI%=TI
%Toshiba%=Toshiba
[ControlFlags]
ExcludeFromSelect=PCI\cc_080500
ExcludeFromSelect=PCI\cc_080501
ExcludeFromSelect=PCI\VEN_1679&DEV_3000
ExcludeFromSelect=PCI\VEN_104c&DEV_ac9f
ExcludeFromSelect=PCI\VEN_1179&DEV_0805
[Generic]
%PCI\CC_080500.DeviceDesc%=SDHost,PCI\CC_080500
%PCI\CC_080501.DeviceDesc%=SDHost,PCI\CC_080501
[TED]
%PCI\VEN_1679&DEV_3000.DeviceDesc%=SDHost, PCI\VEN_1679&DEV_3000
[TI]
%PCI\VEN_104c&DEV_ac9f.DeviceDesc%=SDHost, PCI\VEN_104c&DEV_ac9f
[Toshiba]
%PCI\VEN_1179&DEV_0805.DeviceDesc%=SDHost, PCI\VEN_1179&DEV_0805
[sdbus_Service_Inst]
ServiceType = %SERVICE_KERNEL_DRIVER%
StartType = %SERVICE_DEMAND_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\sdbus.sys
LoadOrderGroup = System Bus Extender
AddReg = SDBUSServiceReg
[SDBUSLocationReg]
HKR,,UINumberDescFormat,,%SDBUSSlot%
[SDBUSReg]
HKR,,Driver,,"sdbus.sys"
[SDBUSServiceReg]
HKR,Parameters,SdCmdFlags,1, 06,01, 09,19, 0A,19, 0D,11, \
10,01, 11,01, 12,01, 18,05, 19,05, \
19,01, 1A,01, 1B,01, 1C,01, \
20,05, 21,05, 26,05, \
2A,01, \
34,02, 35,02, \
37,01, 38,01, \
22,01, 23,05, 24,01, 25,01
HKR,Parameters,SdAppCmdFlags,1, 06,01, 0D,01, 16,01, 17,01, 33,01, \
12,01, 19,01, 1A,01, 26,01, 2B,01, \
2C,01, 2D,01, 2E,01, 2F,01, 30,01, 31,01
[CSCopyFiles]
sdbus.sys
[DestinationDirs]
ClassCopyFiles=11
CSCopyFiles=12
[SourceDisksNames.x86]
0=%Desc_x860%
[SourceDisksNames.ia64]
[SourceDisksFiles.x86]
sdbus.sys=0
[SourceDisksFiles.ia64]
;
; Standard host controller
;
[SDHost]
CopyFiles=CSCopyFiles
AddReg=SDBUSReg
[SDHost.Services]
AddService = sdbus, 2, sdbus_Service_Inst
[SDHost.HW]
AddReg=SDBUSLocationReg
[Strings]
SDClassName="Secure Digital host controllers"
;
; Manufacturer name strings
;
Generic="SDA Standard Compliant SD Host Controller Vendor"
Msft="Microsoft"
TED="Tokyo Electron Device"
TI="Texas Instruments"
Toshiba="Toshiba"
Desc_x860= "XPPRO"
;
; Device Decription strings
;
PCI\VEN_104c&DEV_ac9f.DeviceDesc="Texas Instruments Secure Digital host controller"
PCI\VEN_1679&DEV_3000.DeviceDesc="Tokyo Electron SD Standard host controller"
PCI\VEN_1179&DEV_0805.DeviceDesc="Toshiba Secure Digital host controller"
PCI\CC_080500.DeviceDesc="SDA Standard Compliant SD Host Controller"
PCI\CC_080501.DeviceDesc="SDA Standard Compliant SD Host Controller"
;
;
;
SDBUSSlot = "SD Host Slot %1!u!"
SERVICE_KERNEL_DRIVER = 1
SERVICE_BOOT_START = 0
SERVICE_SYSTEM_START = 1
SERVICE_DEMAND_START = 3
SERVICE_ERROR_NORMAL = 1
SERVICE_ERROR_IGNORE = 0
REG_EXPAND_SZ = 0x00020000
REG_DWORD = 0x00010001
REG_SZ = 0x00000000
took some doing but i have both wifi and sd working with some swaping of drivers install process will post more detail later
Ciberycebyte, can you post how you made possible to work with both SD cards (includins SDHC with more than 2GB) and wireless.
Can you post the drivers you used?
Thanks!
It works now check out my patch if you are interested
The patch
unapproachable2kx said:
It works now check out my patch if you are interested
Click to expand...
Click to collapse
Hi Unapproachable, where can I find your patch, please? Would you please put up a link to it or attache it here in the theread? Thank you!
EDIT: I've found it! For those interested the patch <SDIO_Fix_01a.zip> can be downloaded from the thread SHDC & Wifi XP Fix located at http://forum.xda-developers.com/showthread.php?t=691208
Great thing Unapproachable2kx, thank you! I'll test it asap and report back.
Unapproachable2kx, is this patch still in the alpha state or is it pretty final?
Hi Unapproachable2kx!
I have tested your patch and I have inconsistent results. This means that I got wifi working (it used to work also before the test) and I got SDHC working once without problems for several insertions and wifi connect-disconnect cycles.
But after reboot and several other reboots the system was self-resetting and restarting when inserting the SDHC card (8GB Kingston). So after 6-7 such auto-resets I gave up using the SD card.
It is good to know for those who want to go that way that even if the wifi is on, the wifi icon doesn't show up in the task bar, so to make it visible you have to disconnect it and reconnect it with the .bat scripts (buttons).
Actually it seems to me that one can get the same results as installing the patch by doing an update of the wifi Marvell driver (which will go from the ionitial version 8.75.500.624 to the latest version 8.75.813.830) via internet (wifi connected) by using the appropriate Update button in the Hardware Manager. After that you have to replace in c:\Windows\System32\Drivers the sdbus.sys used in the wifi installation process (6.0.5308.17) with the initial Win XP SP3 6.0.4069.5512 (if you copied and saved it during the installation). For this replacement no Safe mode appears to be necessary. The same game with stopping and restarting the wifi board is necessary.
Any other's experience please?
joy.d said:
if you use that in a *.inf file
(make a new inf file with texteditor and copy lines above into it)
than you can install the raeon sdbus.sys driver
normally without windows safe mode...
;Copyright (c) 2002 Microsoft Corporation
[Version]
Signature="$Windows NT$"
Class=SDHost
ClassGUID={a0a588a4-c46f-4b37-b7ea-c82fe89870c6}
Provider=%Msft%
;LayoutFile=layout.inf
;DriverVer=10/01/2002,6.0.4069.1
DriverVer=06/28/2006,6.0.5308.17
.....................................................
Click to expand...
Click to collapse
Hi joy.d, wonderful thing if working stable.
What is the purpose of getting this new *.inf file, are you trying to replace the initial sdbus.inf file? If so could we start from that one and do only the changes?
Could you please be so kind to attache your *.inf file here in this forum? How did you named it? How to proceed further with it?
What sdbus.sys file did you use, the 4069 or the 5308 version?
Many thanks!

[Q] Dell Venue Pro; Update failed, recover not successfull

Hello there,
my "new" Venue Pro arrived yesterday and i just started to test it.
It had a very old firmware, not even mango ... so i startet updates by zune.
After the third update (for wlan problems, i think it was the "latest" wp7 update) i get an error .... so i restartet the phone an tried again, no success.
I read a lot, not even the microsot update tool could help. So i startet the recover in zune over settings, updates.
The update startet and now i always get an error by 61%. I read a lot again, i even tried to backup it from another comuter (copied image %appdata%\Microsoft\Microsoft Phone Update) but the same problem.
So, my "new" phone doesent start any more ... it just loads to the bootloader ...
I tried to get any offiziel firmware to flash the device to "standard" but i seams hat MS dont want this.
I knew a little bit about flashing WM6 devices (HSPL & custom fw) but with WP7 devices i dont really understand what to do in this situation.
I hope you can help me! Can i download the dell firmeware someware to recover the phone? maybe someone have a "personal recover firmware" for me?
Thx
If your device can load into download mode (that you called "bootloader") it can be restored to 7004 T-mobile branded version and later update to 7720 via Zune. This is only one available firmware on the public.
Look at this thread: http://forum.xda-developers.com/showthread.php?t=1411300
THX!
I will try ... downloading ...
So, i downloaded VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP0030_RV001_RETAIL.ffu and thought, everthing is getting fine.
But i had no idea how i can install this!
I´m reading hours and hours, tried to use UpdateWP.exe (crash on 2 computers, where NO MS Support tools are installed), Windows_Phone_7_Backupv1.9, MangoB2-ZuneClient, Zune 4.7 .... no success.
Could sombody please tell me, how i can install this on Windows 7 x64? I dont know what to do ...
I get this message when i try to updatewp it;
Unhandled Exception: System.TypeInitializationException: The type initializer fo
r 'wm7update.Program' threw an exception. ---> System.IO.FileLoadException: Coul
d not load file or assembly 'Microsoft.WindowsMobile.DeviceUpdate, Version=7.0.0
.0, Culture=neutral, PublicKeyToken=ddd0da4d3e678217' or one of its dependencies
. The located assembly's manifest definition does not match the assembly referen
ce. (Exception from HRESULT: 0x80131040)
File name: 'Microsoft.WindowsMobile.DeviceUpdate, Version=7.0.0.0, Culture=neutr
al, PublicKeyToken=ddd0da4d3e678217'
at wm7update.Program..cctor()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\M
icrosoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure lo
gging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fus
ion!EnableLog].
--- End of inner exception stack trace ---
at wm7update.Program.Main(String[] args)
See also here: http://forums.create.msdn.com/forums/p/85864/516966.aspx
As i said before, there is no (more) Microsoft Update Software on my computer and on the second there never was it.
Mybe i could handle it with the "MangoB2 Updater" .... but i cant download this anywhere.
I really have no luck :-(
Do not panic yet. You have different versionsof zune or updatewp /missing files
Deinstall everything related to zune.DONT TOUCH EVERYTHING RELATED TO MS SUPPORT TOOLS, IF ITS INSTALLED IT DOESNT INFLUE ON PROCESS!!!
Install Net framework 3.5, 4;
Install Zune(take it from zune.net);
Install wp7 updatetool from zip attached here here http://forum.xda-developers.com/showthread.php?t=1306415 with proper x64 file.
Follow those steps after connecting device in download mode:
Extract command prompt to C:\program files\zune\
go to directory to “C:\program files\zune\ and run Command prompt. Type in : “UpdateWp /list” and your phone should show up there.
If your phone is listed (it should be) and your download is done and extracted, copy the VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP003 0_RV001_RETAIL.ffu file over to the” C:\program files\zune\” directory.
Type in: “updatewp /ffu VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP003 0_RV001_RETAIL.ffu” enter, update should start.
YES IT WORKS!
Great, now i can start my dell venue pro again and even updating is functional.
But why can´t i change the display language? I tought i´m able to change the display language in this roms? In all WP7 phones (in germany) i could change the language at the first start (and after a reset).
*argh!*
On this site i found language packs, but that is a little bit ... argh?!
http://forum.xda-developers.com/showthread.php?t=1306415
so it´s over ... i send the phone back ...
Thank u very much 4 helping.

Categories

Resources