Hello,
the Touchscreen of my Shift is not working after i updated to Vista Enterprise Edition. Is there someone that can send me an image of the expanded device manager?
Thank you!
Can you be more specific?
Does it work in Snapvue?
Huib
Same here!
After update to Ultimate or Enterprise version the touch screen does not work within Vista. Works without problem on the snapvue side.
Native HTC Pen Driver missing / not installed.
Have you checked windows update? It offered me an updated HID input touch screen driver a few days ago.
Yes if checked windows update, all update are installed.
HTC gave me this answer:
Dear Customer,
We can not send the drivers yet because only the developers team in Taiwan has got them and they are not redistributing them at the moment. However, you should be able to go back to Vista Business if you perform a "hard reset". When you switch on the shift, if you press and hold FN key and then the number 3, it will show up a recovery utility which should take your device back to factory default settings.
I am wondering if reseting the device is there only solution ?
Vista drivers
I solve similar problem with localized VISTA bussines.
http://forum.xda-developers.com/showthread.php?t=376600
I did it succesfully except WiFi driver.
It was a hard work !
-First time I installed original Vista bussines from hidden partition.
-I extracted ALL original drivers from installed system by All DRIVERMAX and DriverGenius App. (here are PEN drivers !!!)
-I copied them to Backup directory with
full Program Files directory
WINDOWS\WINDOWSMOBILE directory
WINDOWS\SYSTEM32\DRIVERS
WINDOWS\SYSTEM32\DRIVERSTORE
WINDOWS \SYSTEM32\1.REG
BT.REG
ENABLEUAC.REG
D.REG
DE.REG
DS.REG
-------------------------------------------------------------
-Install new localized VISTA. (do not erase or format old VISTA! - it stay in WINDOWS.OLD directory.)
-DO first boot, but do not start VISTA system !
-Boot from BartPE disk and
-copy from backed Program Files directory
to same newVISTA ProgramFiles these dirs:
HTC
FingerPrintSensor
TrendMicro
VitaKey
-copy backed WINDOWS\WINDOWSMOBILE to same newVISTA directory (do not replace the same names, copy only missing files)
-copy backed SYSTEM32\DRIVERS to same newVISTA directory (do not replace the same names, copy only missing files)
-copy backed SYSTEM32\DRIVERSTORE to same newVISTA directory
(do not replace the same names, copy only missing files)
-copy backed SYSTEM32\REGs to same newVISTA directory
-Do boot to newVista.
-Install DriverMax and DriverGenius and import by them all backed drivers.
-Do Restart.
-Install drivers from web: INTEL, VGA,SYNAPTICS,SOUND...
-Do Restart.
-Run 1.reg (it will install all other REGs)
-Do Restart.
-Automatic install will start - Origami, ControlCenters....
-set buttons on side of display:
http://forum.xda-developers.com/showthread.php?t=378650
-Run downloaded from MS web:
MicroSoft HotFix KB934796(USB)
http://support.microsoft.com/kb/934796
MicroSoft HotFix KB929761(WUSA)
http://support.microsoft.com/kb/929761
MicroSoft HotFix KB936825(SD)
http://support.microsoft.com/kb/936825MicroSoft HotFix KB934796(USB)
-Run Vitakey for FingerPrint security
All apps and all drivers (not WiFi) are installed.
And thats all folks.
Please let me know If You will have WiFi driver installer.
Is it Marvell SDIO SD8686 WiFi driver and is not possible to import it by DriverMax or Genius.
Here's the SD8686 driver - http://forum.xda-developers.com/showthread.php?p=2108992#post2108992.
NuClear235 said:
I solve similar problem with localized VISTA bussines.
http://forum.xda-developers.com/showthread.php?t=376600
I did it succesfully except WiFi driver.
It was a hard work !
-First time I installed original Vista bussines from hidden partition.
-I extracted ALL original drivers from installed system by All DRIVERMAX and DriverGenius App. (here are PEN drivers !!!)
-I copied them to Backup directory with
full Program Files directory
WINDOWS\WINDOWSMOBILE directory
WINDOWS\SYSTEM32\DRIVERS
WINDOWS\SYSTEM32\DRIVERSTORE
WINDOWS \SYSTEM32\1.REG
BT.REG
ENABLEUAC.REG
D.REG
DE.REG
DS.REG
-------------------------------------------------------------
-Install new localized VISTA. (do not erase or format old VISTA! - it stay in WINDOWS.OLD directory.)
-DO first boot, but do not start VISTA system !
-Boot from BartPE disk and
...
Please let me know If You will have WiFi driver installer.
Is it Marvell SDIO SD8686 WiFi driver and is not possible to import it by DriverMax or Genius.
Click to expand...
Click to collapse
Doesn't worked for me.
Touchscreen still not working under Vista Ultimate.
I've tried with full version, with Anytime with new HD... (about 5 times)
Any idea???
Ommog said:
Doesn't worked for me.
Touchscreen still not working under Vista Ultimate.
I've tried with full version, with Anytime with new HD... (about 5 times)
Any idea???
Click to expand...
Click to collapse
I am with Vista Ultimate too and touchsreen is not working neither buttons on side of the display...
any help please?
Hello everybody,
Is it possible that the SD Card's are not working on XP?
I have an entry in my device manager. But if I insert a SD Card it wont work.
Regards,
CodeX2k
XP on the shift reads my smaller cards, 1gb and 4gb, but not my 16gb sdhc. There is an XP sdhc patch available from microsoft, but it made no difference on my shift.
Mine reads 16.
Only after hibernate/sleep I often loose any sd card and I get an error in my device manager.
Huib
Stupid me!
Did not see the XP!
Apologizes pls
Stupid me!
Did not see the XP!
Apologizes pls
Huib
Right now I can't test if the smaller cards are working. I only have a 16GB SDHC Class 6 with me in my holidays...
Did anyone get SDHC Cards working on XP?
I have the same problem when I installed the XP, SD slot won't read 16G,
But 16G SD card works with my USB card reader. Touch screen also won't work so gave up XP, restored Vista.
Only things won't work for me on XP are SDHC, Resolution Change and the HTC Utility all others works just fine ahhh and Touchscreen Calibration.
Hi @all
***EDIT***
I test now some other drivers, and see: It is really necessary, that you really right update the sdbus driver. I use this one:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67470
and force this driver to update, then if you want to update this driver normally, then the device manger tells you, that no other driver is newer than the installed.
But: I install again from scratch and test a little bit.
I think it is really related to the sdio driver problem when you want to install the WLAN.
But i´m not really shure, it is the right driver.
later more ;-)
*** old ***
SDHC don´t work to by my side. (test with 8GB kensigton) Normal SD e.g. 512MB Cards works.
I comparing the drivers with a other Notebook and i See, on HTC Shift the Driver is originaly from Microsoft build date 10-01-2002. My other Notebook has an driver from 2006 and from company O2Micro.
maybe that´s the Problem. Anybody knows what is the manufacturer of the SD Card Slot?
Can anybody send me the *.inf files from a Vista installed machine? Or have a look to the devicemanager of Vista, which driver is installed?
Additional I See: the driver sdbus.sys located in c:\windows\system32\drivers is the Version 6.0.5308.17 (with SP3) and is newer than the SDHC Hotfix that you can download from Microsoft...
Hmm. crazy..
see here the Microsoft Hofix link: (BTW: there a other hotfixes for SDHC Issues downloadable from MS too)
http://support.microsoft.com/kb/923293/en-us
It doesn't appear to be limited just to the Shift: http://forum.xda-developers.com/showthread.php?t=366570
It appears that the hotfix won't work and even the sp3 unless there's a specific fix/driver for the Shift, since Shift is not supported with XP officially, there wouldn't be one from HTC.
P.S. 16GB doesn't work on mine either. Still, not enough to make me go back to the ultra-slow Vista
Hi Doni,
thank you, really interesting. As I install a blank Windows XP SP3 from CD on shift (without additional drivers) , my Kingston 8GB SDHC Card works. (the first time I inserting my SDHC I become a blue screen) but after restart it works.
I think, the SD Card Reader device of Shift is a standard product, that build into other PC´s too, only the way to find out that that´s is the problem
I have some backup´s from my installation and can go back, so I will try it, at which time it has works..
see
http://forum.xda-developers.com/showthread.php?t=438820
###edit: ###
I test it with fallback to my older backups.
SDHC works, before I Installed the SDBUS.sys driver that is needed to become WLAN functionality. So I think, we must look for a other sdbus.sys driver (file) ?
I'm assuming then that WLAN doesn't work with the SP3 sdbus.sys, right? And the version that does, doesn't work for SDHC. Nice I suppose we need one that does both.
Hi Doni,
i have searched some hours for a solution.
to track the problem was a Everun UMPC http://www.raondigital.com/fnt_english/ev01.asp
essential, where we have stolen the sdbus.sys driver.
If you go there to the support and driver download you see, there is only the "sdbus.sys".
Really interesting, "how to" the normal user can change this file
normally is in a driver package (*.sys) always a *.inf file included, what I missed.
When you change only the *.sys file, maybe you can have problems with it, sometimes, there a difficult or other settings stored in Registry to control this driver.
And this is the problem I´m think. We need an officical *.inf (maybe installed) file from a Raon Everun UMPC.
I install at the moment Vista on shift to fetch the SD Bus settings from Vista side, maybe I become like Jesus and see the holy spirit.. (sorry, only joking)
I think the sdbus drivers of WXP-SP3 are ok, but you need some registry tweaks to control that right. Maybe the *.inf from Vista tell it me.
BTW: I don´t need the sdbus.sys from RAON within my precomiled WXP TPC SP3. WLAN works with the original sdbus.sys as well.
And that´s it: I try this way. Next week I´m on a Business trip, long time in lonesome hotels with long nights..
Always with a 16GB USB Stick and Acronis on it to recover. What need a man more in the City Jungle?
))
bg Joy
BTW:
WXP SP3 Driver Version 6.0.4069.5 from 2008-10-01 (Y-M-D) (sdbus.sys 6.0.4069.5512 (080413-2111)
Vista (org HTC) Version 6.0.6000.16478 from 2006-06-21 6.0.6000.16478 (vista_gdr.070427-1615)
Vista with SP1 Version 6.0.6000.18000 from 2006-06-21 6.0.6001.18000 (longhorn_rtm.080118-1840)
if you use that in a *.inf file
(make a new inf file with texteditor and copy lines above into it)
than you can install the raeon sdbus.sys driver
normally without windows safe mode...
;Copyright (c) 2002 Microsoft Corporation
[Version]
Signature="$Windows NT$"
Class=SDHost
ClassGUID={a0a588a4-c46f-4b37-b7ea-c82fe89870c6}
Provider=%Msft%
;LayoutFile=layout.inf
;DriverVer=10/01/2002,6.0.4069.1
DriverVer=06/28/2006,6.0.5308.17
;
; Information for installing the SD class
;
[ClassInstall32]
AddReg=ClassAddReg
CopyFiles = ClassCopyFiles
[ClassAddReg]
HKLM,System\CurrentControlSet\Control\CoDeviceInstallers,{a0a588a4-c46f-4b37-b7ea-c82fe89870c6},0x00010008, "sdhcinst.dll,SdClassCoInstaller"
HKR,,,,%SDClassName%
HKR,,Icon,,"2"
HKR,,Installer32,%REG_SZ%,"sdhcinst.dll,SdClassInstall"
HKR,,NoInstallClass,,1
[ClassCopyFiles]
sdhcinst.dll
;
; List of manufacturers and devices
;
[Manufacturer]
%Generic%=Generic
%TED%=TED
%TI%=TI
%Toshiba%=Toshiba
[ControlFlags]
ExcludeFromSelect=PCI\cc_080500
ExcludeFromSelect=PCI\cc_080501
ExcludeFromSelect=PCI\VEN_1679&DEV_3000
ExcludeFromSelect=PCI\VEN_104c&DEV_ac9f
ExcludeFromSelect=PCI\VEN_1179&DEV_0805
[Generic]
%PCI\CC_080500.DeviceDesc%=SDHost,PCI\CC_080500
%PCI\CC_080501.DeviceDesc%=SDHost,PCI\CC_080501
[TED]
%PCI\VEN_1679&DEV_3000.DeviceDesc%=SDHost, PCI\VEN_1679&DEV_3000
[TI]
%PCI\VEN_104c&DEV_ac9f.DeviceDesc%=SDHost, PCI\VEN_104c&DEV_ac9f
[Toshiba]
%PCI\VEN_1179&DEV_0805.DeviceDesc%=SDHost, PCI\VEN_1179&DEV_0805
[sdbus_Service_Inst]
ServiceType = %SERVICE_KERNEL_DRIVER%
StartType = %SERVICE_DEMAND_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\sdbus.sys
LoadOrderGroup = System Bus Extender
AddReg = SDBUSServiceReg
[SDBUSLocationReg]
HKR,,UINumberDescFormat,,%SDBUSSlot%
[SDBUSReg]
HKR,,Driver,,"sdbus.sys"
[SDBUSServiceReg]
HKR,Parameters,SdCmdFlags,1, 06,01, 09,19, 0A,19, 0D,11, \
10,01, 11,01, 12,01, 18,05, 19,05, \
19,01, 1A,01, 1B,01, 1C,01, \
20,05, 21,05, 26,05, \
2A,01, \
34,02, 35,02, \
37,01, 38,01, \
22,01, 23,05, 24,01, 25,01
HKR,Parameters,SdAppCmdFlags,1, 06,01, 0D,01, 16,01, 17,01, 33,01, \
12,01, 19,01, 1A,01, 26,01, 2B,01, \
2C,01, 2D,01, 2E,01, 2F,01, 30,01, 31,01
[CSCopyFiles]
sdbus.sys
[DestinationDirs]
ClassCopyFiles=11
CSCopyFiles=12
[SourceDisksNames.x86]
0=%Desc_x860%
[SourceDisksNames.ia64]
[SourceDisksFiles.x86]
sdbus.sys=0
[SourceDisksFiles.ia64]
;
; Standard host controller
;
[SDHost]
CopyFiles=CSCopyFiles
AddReg=SDBUSReg
[SDHost.Services]
AddService = sdbus, 2, sdbus_Service_Inst
[SDHost.HW]
AddReg=SDBUSLocationReg
[Strings]
SDClassName="Secure Digital host controllers"
;
; Manufacturer name strings
;
Generic="SDA Standard Compliant SD Host Controller Vendor"
Msft="Microsoft"
TED="Tokyo Electron Device"
TI="Texas Instruments"
Toshiba="Toshiba"
Desc_x860= "XPPRO"
;
; Device Decription strings
;
PCI\VEN_104c&DEV_ac9f.DeviceDesc="Texas Instruments Secure Digital host controller"
PCI\VEN_1679&DEV_3000.DeviceDesc="Tokyo Electron SD Standard host controller"
PCI\VEN_1179&DEV_0805.DeviceDesc="Toshiba Secure Digital host controller"
PCI\CC_080500.DeviceDesc="SDA Standard Compliant SD Host Controller"
PCI\CC_080501.DeviceDesc="SDA Standard Compliant SD Host Controller"
;
;
;
SDBUSSlot = "SD Host Slot %1!u!"
SERVICE_KERNEL_DRIVER = 1
SERVICE_BOOT_START = 0
SERVICE_SYSTEM_START = 1
SERVICE_DEMAND_START = 3
SERVICE_ERROR_NORMAL = 1
SERVICE_ERROR_IGNORE = 0
REG_EXPAND_SZ = 0x00020000
REG_DWORD = 0x00010001
REG_SZ = 0x00000000
took some doing but i have both wifi and sd working with some swaping of drivers install process will post more detail later
Ciberycebyte, can you post how you made possible to work with both SD cards (includins SDHC with more than 2GB) and wireless.
Can you post the drivers you used?
Thanks!
It works now check out my patch if you are interested
The patch
unapproachable2kx said:
It works now check out my patch if you are interested
Click to expand...
Click to collapse
Hi Unapproachable, where can I find your patch, please? Would you please put up a link to it or attache it here in the theread? Thank you!
EDIT: I've found it! For those interested the patch <SDIO_Fix_01a.zip> can be downloaded from the thread SHDC & Wifi XP Fix located at http://forum.xda-developers.com/showthread.php?t=691208
Great thing Unapproachable2kx, thank you! I'll test it asap and report back.
Unapproachable2kx, is this patch still in the alpha state or is it pretty final?
Hi Unapproachable2kx!
I have tested your patch and I have inconsistent results. This means that I got wifi working (it used to work also before the test) and I got SDHC working once without problems for several insertions and wifi connect-disconnect cycles.
But after reboot and several other reboots the system was self-resetting and restarting when inserting the SDHC card (8GB Kingston). So after 6-7 such auto-resets I gave up using the SD card.
It is good to know for those who want to go that way that even if the wifi is on, the wifi icon doesn't show up in the task bar, so to make it visible you have to disconnect it and reconnect it with the .bat scripts (buttons).
Actually it seems to me that one can get the same results as installing the patch by doing an update of the wifi Marvell driver (which will go from the ionitial version 8.75.500.624 to the latest version 8.75.813.830) via internet (wifi connected) by using the appropriate Update button in the Hardware Manager. After that you have to replace in c:\Windows\System32\Drivers the sdbus.sys used in the wifi installation process (6.0.5308.17) with the initial Win XP SP3 6.0.4069.5512 (if you copied and saved it during the installation). For this replacement no Safe mode appears to be necessary. The same game with stopping and restarting the wifi board is necessary.
Any other's experience please?
joy.d said:
if you use that in a *.inf file
(make a new inf file with texteditor and copy lines above into it)
than you can install the raeon sdbus.sys driver
normally without windows safe mode...
;Copyright (c) 2002 Microsoft Corporation
[Version]
Signature="$Windows NT$"
Class=SDHost
ClassGUID={a0a588a4-c46f-4b37-b7ea-c82fe89870c6}
Provider=%Msft%
;LayoutFile=layout.inf
;DriverVer=10/01/2002,6.0.4069.1
DriverVer=06/28/2006,6.0.5308.17
.....................................................
Click to expand...
Click to collapse
Hi joy.d, wonderful thing if working stable.
What is the purpose of getting this new *.inf file, are you trying to replace the initial sdbus.inf file? If so could we start from that one and do only the changes?
Could you please be so kind to attache your *.inf file here in this forum? How did you named it? How to proceed further with it?
What sdbus.sys file did you use, the 4069 or the 5308 version?
Many thanks!
I am really struggling with this tool and will appreciate all the help I can get.
I installed WinXP successfully with WIFI and bluetooth enabled and working. Then I didnt use my Shift for a month ( been on business trip). Battery was completely discharged. When I charged the battery WIFI and Bluetooth are switched off. I assume it cause of full battery discharge.
Now I am trying to make use of Pof's tool but having problems.
I ran install.bat and then tried to use enable WIFI with no joy. I downloaded crygwin and installed it.
I tried to installed ioperm manually but it said "ioperm already installed, canot start service".
On enableWIFI.bat it says "connot connect port. no device found"
Any ideas? pof?
Try uninstalling ioperm (ioperm -U I think?)...reinstalling it, then copy hsect2.exe into the bin folder of cygwin (in c drive)....open cygwin by double clicking on the cygwin icon....type in hsect2 -W 1 to turn wifi on...zero to switch off....same goes for bluetooth - hsect2 -B 1 for on....
TRy that first...
Just out of interest, where did you even find instal.bat in pof's tool? All I got was a zip file with 3 text notes and the hsect2.exe...nothing else? I couldn't break the .exe down any further?
I downloaded and unzipped POf tool
When I downloaded Pof's tool I got more files. There were batch files to switch bluetooth and wifi on and off. (so tha tu dont have to type switches). I also had ioperm and crygwin.dll plus and install. bat which installs ioperm.
When I install ioperm it says driver installed. funtion call to start service failed.
when I uninstall it by using -u switch it says its is not running.
the bin folder in crygwin in empty. I copied hsect2.exe as you suggested but it requires crywin.dll to work.
I am close to pulling my hair out.
Try to remove battery, install it back and then run install.bat and so on.
I got cygwin from here - http://www.cygwin.com/setup.exe
Just run the installer, the only change you need to make to the default settings is to tick the ioperm box, which is in the libs section. You'll see what I mean when you install it.
Then you can copy the hsect2.exe file to the cygwin/bin folder, and run cygwin and issue the commands there.
ya75khan - I think you need to delete all the old cygwin files and start from a new. As Pantaloonie touches on you need to d/l the full cygwin recommended data set PLUS make sure ioperm is selected...I tried using a lesser number of files by deselecting some but eneded up with similar messages relating to DLL's missing etc etc.
I started a fresh with a new download and installed as per Pantaloonie's instructions and "bing", hsect2 worked.
Pantaloonie, do you think we got a different file set off pof's site? Seems we might not have the same files as some others? Mind you, entering the command line info is straightforward - the buttons do look savvy tho....
No joy
Many thanks for the great suggestions. However despite follwing it word by word I have same problem. i.e. ioperm is installed but service fails to start.
and hence hsect2 has no effect.
I then reverted back to vista. swtiched on WIFI and bluetooth. I earlier had an acronis image of the clean install xp. It was a breeze to resotore the xp with all the drivers installed.
I am happy to share the acronis image. it took a lot of effort to install all drivers and can be realy helpful for some one looking to install XP. problem is it is almost 4gb in size and I cant find a free web service to upload it.