Hi there,
Has anyone managed to get the hardware buttons for Camera and Record to work on an iMate PPC (PH10B).
I have managed to sucessfully load WM5.0
ROM version: 1.50f.blWWE
ROM Date: 13/05/05
Radio version: 1.14.00
Protocol version: 337.24
I have read in a copule of forums that there is an issue with the buttons mentioned above.
krazykid,
I believe buzz_lightyear is aware of this problem and has said he will release a patch to solve this byTuesday. There are other applications that can be used as a work around.
Vito Button Mapper is one of them.
buzz!!! Thanx a lot man for the first time I am able to use my XDAII as it should have been working in the first place.
Using:
Falcom NAVI-1 BT GPS
Sony Ericson HBH 600 BT Headset
Sony Ericson HBC 30 BT Carkit
Microsoft Voice Command 1.5
Handy Map 2004 se
GB-Soft GPRS Monitor
Skype
ActiveSync 4.0 USB & BT
Related
Thiss is the ROM of my Qtek:
ROM: 1.66.00WWE
DATE: 02/20/04
RADIO: 1.10.00
PROTOCOL: 1337.18
ExtROM: 1.66.130
I am looking for a headset that correctly works and which causes no conflicts with the Emtac Crux BT GPS receiver.
First I was intend to buy a Logitech, but I read on a dutch forum that it doesn't work fine with this ROM-version.
BTW - can I DOWNgrade a ROM ???? I dn't think so...
So, now I thougt to buy a Sony/Ericson HBH-30 or HBH-35 ???
Would this be a lucky combination ????
Hi mvb95,
I use the 172 beta ROM with an Emtac Bluetooth GPS and a Logitech bluetooth headset. No problems at all. I can Navigate using TomTom and call at the same time. TomTom will mute when I'm using the phone and will be unmuted when the phonecall has ended.
This has been working with the 160 ROM also and with an Bluetrek G2 headset and a Nokia HDW2 headset with the same GPS receiver.
The problems on thread on the Dutch site are strange and I can't reproduce them.
Hope this helps your decision.
Wouter
Hi
This is my first post, so hello all.
I received my new spv-m1000 yesterday afternoon, and last night attempted to install all the software I wanted on it. Most of this went smooth but I have got a problems with bluetooth.
I’ve had an Ipaq 3870 for a few years and run tomtom with a bluetooth GPS receiver.
Problem 1
Anyway I can pair with the bluetooth gps but I cant get any nmea data from it. I can’t see any way of seeing what services are provided by the gps, and therefore can’t bind it to a serial port.
Problem 2
The unit works with my bluetooth parrot handsfree kit, but the volume is very loud, is there anyway of controlling the volume from the spv-m1000?
My ROM versions are
ROM 1.60.00WWE (12/03/03)
Radio 1.10.00
Protocol 1337.18
ExtROM 1.60.38
Thanks in advance
JustinP
Hi
I have jsut found http://bluetooth.i-networx.de/index_e.html whihc has sorted out my bluetooth GPS.
Cheers
JustinP
These stacks I believe are newer than the Widcomm 1.5.0 series
I think Broadcom reset the version 1.0.0
These are Broadcom 1.0.0.3000 and Broadcom 1.0.0.3500
Build 3500 is slightly unstable but newer.
These came from an i-mate patch for a PDA2K.
DO NOT USE on an i-mate PDA2K (get the orginal unhacked ones from Club i-mate).
I removed files specific to that phone and basically left just the BlueTooth stack.
Recommend a HARD RESET before installing.
I've tested theses patches on a Sprint PPC-6601 (Blue Angle CDMA phone).
Do not do a restore of a backup before or after installing this because it may restore incompatible configuration files that may crash. Build 3100 is more robust against this problem.
Hey Bro
These two are for the Qtek 9090/Xda IIs or Xda II?
I am running 2.20CHS translated with Radio 1.18 and have been unable to get this stack to work. Has anyone tried it?
The ones I posted above are hacked by me to work on the CDMA version (Namely Sprint PPC-6601).
The ones referenced in this reply below are the original patches I started with that came from i-mate club. The offical phone name that the patches are for is "i-mate™ PDA2k" (GSM Slide out keyboard). I don't know how well they would work on the Qtek 9090.
Build 3500 http://www.blueridge.net/dereck/bt/PDA2k_Bluetooth_Fix.CAB
Build 3000 http://www.blueridge.net/dereck/bt/new/OEM_WWE_122_008.sa.CAB
Yes, good link but already bad quality with all bluetooth headset.
It's a shame.
It's a shame you don't give more details.
Which phone, which patch and what happened.
Works great on my phone.
I'm using the 3100 patch from the first post in this thread on a PPC-6601 with a HBH-300. Installed on top of a HARD RESET. That has Build 1.0.0.2200.
It's almost working perfect. Once in a great while if I go out of range for a long time I just toggle bluetooth and it reconnects immediately.
Dial Up Networking and Active Sync all work.
No static. No dropouts. Will go to sleep and wake up and still be connected.
I think that the "shame" was not for you but for imate as their patch don't solve all the issues. Maybe only a bad english ?
Tried on Himalaya_SE 2.06...
I'd merged the files from 2.02 and 2.06 and get a fairly stable handsfree, but I saw your files and got greedy... :twisted:
hmmm, it didn't work though. The installation freeze at splash screen after i cold reset the device.
I believe that there are still device specific entries in the cab files, but it's beyond me at this moment. :?
yes sorry. Just bad english because i am french
This website is wonderfull and a lot of information
But i bought a qtek 9090 (850 euros) and i realize that they sell some device with a lot of bug
Here is my qtek config
qtek9090
Patch fr bt 3000 or 3500 (it's the same : they are bugs both for headset quality)
Windows mobile 2003 SE 4.21.1088 build 14132
rom 1.12.20 FRE
radio rom 1.02.00
ext rom 1.12.146 FRA
Ericson 300 works good but it's too big for me. I am not robocop
But each headset i have tested with bt 3000 and 3500 becomes bad when you stay more than 1 metter from your device. There is scrashesssssssssss in the headset. You have to stay front of the device (in car for exemple) and it works perfectly.
But when i work the pda stay in my bag or other place then quality is horrible
That's why i said it's a shame from imate.
I think there is a defect on this device. I don't know what can i do to increase the audio quality when you stay far from the PDA.
If somebody can help me ????????
But i can see that everybody have the same problem and can't solve it.
Waiting for another ROM. HIHIHIHIHIHIHI they are mad to sell this device like this.
If somebody can find bt 3500 patch from imate in french i am very interested.
Thanks to everybody from xda developer : a great site
yes sorry. Just bad english because i am french
This website is wonderfull and a lot of information
But i bought a qtek 9090 (850 euros) and i realize that they sell some device with a lot of bug
Here is my qtek config
qtek9090
Patch fr bt 3000 or 3500 (it's the same : they are bugs both for headset quality)
Windows mobile 2003 SE 4.21.1088 build 14132
rom 1.12.20 FRE
radio rom 1.02.00
ext rom 1.12.146 FRA
Ericson 300 works good but it's too big for me. I am not robocop
But each headset i have tested with bt 3000 and 3500 becomes bad when you stay more than 1 metter from your device. There is scrashesssssssssss in the headset. You have to stay front of the device (in car for exemple) and it works perfectly.
But when i work the pda stay in my bag or other place then quality is horrible
That's why i said it's a shame from imate.
I think there is a defect on this device. I don't know what can i do to increase the audio quality when you stay far from the PDA.
If somebody can help me ????????
But i can see that everybody have the same problem and can't solve it.
Waiting for another ROM. HIHIHIHIHIHIHI they are mad to sell this device like this.
If somebody can find bt 3500 patch from imate in french i am very interested.
Thanks to everybody from xda developer : a great site
Note that I attached to the first post of this thread Build 3500 release 124 of the i-mate patch stripped down for use on PPC-6601 and VZ6600.
BT problems
Just installed the 3500 fix.
It improves slightly on the Jabra 250, but not enough to actually use it.
It Stabilized the connection between my Holux GR230 GPS and the Qtek 9090.
Hope there will be a better fix.
Try to look at the connection, problem with the Jabra is that it fluktuate from just right to zero every other second.
Nice to pay 800 Euro for something that do not work :shock:
I've added new patches to this the start of this thread.
They work primarily on PPC-6601. Read the attached notes.
Hi mswlogo,
Can you help me if you know which version works on a win2003se translated from chinees on himalaya?
Thanks
That phone is quite different.
I think some other folks are working trying to get this stack working on other phones like yours.
Most of the patches above have registry scripts run in them that will very likely not work on your phone.
The other patches assume you are already running late version BroadComm Stack.
I have HP hx4700 and the Widcomm version is 1.5.0 Build 2000
which one is newest?
That's a really good question.
I'm amazed to see BroadComm on 1.5 instead of WidComm.
What are the dates on the bluetooth files \windows\bt*.*
They are generally around 12/9/2004
It's hard to say what BroadComm and the venders are doing here.
Bluetooth stack on h6315
I just found a new bluetooth stack from:
http://www.ppcw.net/?itemid=2210#cmt9543
Installed on my t-mobile h6315. Device was previously inoperable with bluetooth headset. Device would go into power standby mode, and if bluetooth was running when it went to sleep, it would freeze requiring a soft reset. Now device wakes on power button, with bluetooth running, as it's supposed to. Device also wakes on incoming call, reconnects headset in less than 1 second, and allows me to answer call on the headset buttons. All other headset functions are working as designed, and sound quality seems good. My headset is plantronics 2500. Also, this stack adds a profile in the list for A2DP (??) high quality stereo headphones. Don't have any of these headphones, so don't know if this works on the h6315. Also, don't know if this is the same Broadcom/Widcomm stack you guys have been working with.
Installation is straightforward - put it on the device and tap it. Reset, delete existing device pairings, re-establish the device pairings, and you're ready to test.
All that patch is supposed to do is add two new bt profiles to the pda2k.
* High-Quality Audio support (A2DP)
* Keyboard support (HID)
I'm slightly suprised you got a performance gain out of it.
h6315
It's definately fixed the problems with my device hanging when it goes into standby with bluetooth running and the headset connected.
Now my question is should I install the build 3500 for the 6315 listed above? It appears to be a newer release than this. Any thoughts as to the differences? I'm having a hard time following from the thread as to all the other changes that are in this .cab, and why they are there? Can any one help summarize that?
After trying at least 10 different conbinations of rom/bt stack/patch, finally get bt GPS and A2DP headset to co-exist on my XDA II. I want to thank the brains of this forum...
BTW, Here is the first impression:
1.A2DP functioning well.
2.AVRCP also works!
3.Sound quality is great, no dropping/cut-off.
4.Machine is a bit slower when streaming music.
5.Occational re-bonding of the BT GPS receiver needed, but painless, takes less than a minute.
Still enjoying/testing...
I'm using i-Mate PPCPE (XDA II), Moto HT-820 headset, Belkin(Fortuna?) BT GPS receiver. WM5 ROM 2.01a.32WWE (dl from buzzdev), Radio 1.18.00...
Thanks again guys!
WOW, please tel us how?
Hello cpz21,
I have been searching for a solution for awhile now and keep hitting brick walls.
Could you please tell us the method and sources you used.
I am in need of Bonding my Imate xdaii to my Blueant x5 Headset and from my understanding I need a whole lot of upgrades to do so.
My specs are;
I-mate xdaii
PPC Version 4.20.0
ROM Version 1.66.00WWE
Radio Version 1.10.00
Can this be done?
Thanks
Re: WOW, please tel us how?
MrGucciman said:
Hello cpz21,
I have been searching for a solution for awhile now and keep hitting brick walls.
Could you please tell us the method and sources you used.
I am in need of Bonding my Imate xdaii to my Blueant x5 Headset and from my understanding I need a whole lot of upgrades to do so.
My specs are;
I-mate xdaii
PPC Version 4.20.0
ROM Version 1.66.00WWE
Radio Version 1.10.00
Can this be done?
Thanks
Click to expand...
Click to collapse
If you only need stereo headset, ROM1.72WWE will be okay, just install widcomm BT stack (http://forum.xda-developers.com/viewtopic.php?t=11729&postdays=0&postorder=asc&start=73), you don't need wm5.
If you have BT GPS as well, you need to upgrade to wm5, everything works; or you can use xda2jojo's WM2003seUpgrade (http://forum.xda-developers.com/vie...days=0&postorder=asc&highlight=2003se&start=0), but you have to switch between MS BT stack and wicomm BT stack to use stereo headset and GPS.
good luck.
Hi,
i have a new JVC car radio (AVX33) with builtin Bluetooth and a Bluetooth GPS Mouse. Everything work fine also A2DP stereo but only one at time When my BA (with last Explode Rom) is connected to the radio and i want navigate with TomTom or any other programm i cant connect to the GPS mouse.
Disconnect the Radio, the GPS Mouse worked fine but when i reconnect the radio, it disconnect the GPS mouse.
Is there any way to use both at the same time?
Thanks,
tasar
It seems that all BA WM6 (6.1) ROM do not manage correctly multiple connections with BT devices at the same time. There is no way, for example, to grant BT ActiveSync connection while connected to a stupid BT hearphone (or to a GPS unit, as in your example).
I will downgrade to WM 2003 very soon...
Not good to hear But when i go back to 2003 i cant play music over BT,right? No A2DP with 2003?
Is this a problem form the BA or from WM6? I tkink to buy another PDA (which?) but when there is the same problem, i can keep my BA.
Tasar
Correct Mixture can be possible
Unfortunately, the current answer is a mixture between the WWE os and BT Software with know sacrafice.
My current build is: BA 5.2.19202 with MS BT
This is the current issue that you are defining.
Previous build:
TouchFlo 5.2.1938 with Broadcom 1.7.1
This allows the use of BT GPS and A2DP stereo at the same time.
Unfortunately it is at the cost of the phone feature. If you pair the headset feature of the of the stereo device, it will always choose the headset and not A2DP.
So the end question is: what enviroment do you want. A phone pda or pda
One final issue: The Broadcom 1.7.1 software does not work with all os. My 5.2.1902 will not work and the uninstall restores an older version of the MS BT with problems. I ended up reflashing the device.
aerotrike said:
So the end question is: what enviroment do you want. A phone pda or pda
Click to expand...
Click to collapse
What a question Of course i want a Phone PDA!
But is the Bluetooth Problem an BA problem or a WM6? I think to buy another/newer PDA but when this is an WM6 Problem i can keep my BA.
Tasar
Push this to top again.
Is there a solution for this problem...?
I want to connect my BA (WM6) to a BT-Mouse and to a BT-Headset (mono) at the same time. Does this cause any Problems, or does it work...?
Greets Rossi
You should try; i connect my BT-GPS receiver and my BT-headset in the same time, with no problems.
Can you tell which GPS and Headset, and what are youre settings...?
I tried with these and it won't work:
- Navilock BT-348 Bluetooth GPS
- MIDLAND Rider Bluetooth Headset
Which version of WM6, eg. HELMIs...?
Greets Rossi