Hi,
I'm new here so i'm a noob but : I have a computer installed in my car with a touchscreen. I don't have a normal radio anymore.
My S100 is connected with my car computer trough USB to charge the battery, i can also sync with the same cable.
Would it possible or is there a program that would allow me to make a phone call with my car computer trough the usb cable with my qteks100 ?
A weird question i know but i tought that woulld be possible...
THX
Related
:roll:
My Mini XDA can't connect to my PC via USB cable anymore, it can only recharge the battery.
My iPaq connects flawlessly, so it's not my PC.
Any suggestion ???
Mine does not connect after been run even a little bit. However if I do a soft reset and connect to the usb cable it seems to hook up right away. Whe I first got it it did not have any problems like this and I would like to fix it if possible.
I have read a no. of posts regarding the subject problem but found no solution. My O2 Exec is not connecting to PC with USB. Even in Bootloader, it shows usb on top when connected to the cable but is not detectable to even MaUpgradeUt_noID.
One other thing is that when its connected to PC through USB and switched on, it stop the charging and only resumes if switched off again.
Can any body tell me how to know whether USB port is working properly and solve this problem.
Please help!!!!
I have an Orange M3100 (Hermes 100 /TyYN) which is running WM6 (LVSW Edition).
My device synchronises with my computer running Vista and Mobile Device Center 6.1
I purchased the HTC TyTN Y Cable (http://www.expansys.com/p.aspx?i=145071) to allow me to charge and unit and use the Hermes as MP3 player in the car.
The cable didn't work until I installed the following driver - http://www.europe.htc.com/support/software/htctytn.html
I used this instruction hack to get the driver installed -
http://www.expansys.com/ft.aspx?i=145071&thread=1
I have attached the cab file I used to this thread.
The cable now works perfectly in the car BUT this morning I connected the Hermes with the normal USB lead to my computer and I can't sync. The following message appears on the phone:
To synchronize this device, you must install ActiveSync 4.5 or newer on your desktop computer.
Any ideas?? I need to use synch for work purposes so I really stuck.
There is no uninstall (remove programs) for the driver and I really don't want to reflash a new rom if it can be avoided. (This is the worse case scenario.)
Thanks!
WM6 ROM with Driver
Just a thought is there a WM6 ROM with this driver already integrated???
The driver you've posted, maybe disable the "transfer data check" when power is connected.
The Y cable HAS NOT the pins 4&5 (on its mainboard are 1&2) jointed, so before the driver installation, the pda was unable to charge.
Note: if you connect a cable with pins 4&5 jointed, the sync doesn't work
When you've installed the driver, maybe it has disabilited the "data check" (from USB DATA pins) and "joint check" (pins 4&5) and something goes wrong..
Need more tests, with and without the Y adapter, however all should be ok with an HReset (and you've to joint the pins into the Y cable, that you cannot use to syncronize)
SkizZO
Thanks for the reply.
The Y cable is only used in the car (for audio out and charging) so the Y cable is not used for the computer sync. I simply use the standard computer usb sync cable to synch with the computer. I did however try using the Y cable for the computer sync and it didn't work.
Most bizarrely the computer sync worked perfectly this morning for no apparent reason - I definately didn't change any settings. The only thing is I didn't connect the Hermes to the car enroute home. I wonder does the driver get confused switching between the Y cable and standard USB synch cable - maybe the device requires a soft reboot between switching between Y cable and USB cable?
I'll try it over the next few days and report back on the findings.
I am running Black Edition 3.0.1 and before installing your cab, my y-cable didn't work. I just installed it and my sync with Vista still works perfectly fine as well as the y cable!
So no problem here at all.
I`ve TYTN and one day it stopped sychro via cable...
I plug cable - its starting charging but ASych stay absolutly quite (any notification any problem connecting) . Like I didnt plug cable
Ive made a Hrd reset , change cable but situation tha same .
any solution, please.
Did you reboot your pc? Did you try another USB device (USB port broken)? Did you reinstall activesync?
That's what i would try....
Try reinstall the active sync software. maybe the usb driver was corrupted
Because it can charge,so maybe the cable is OK( and the voltage is enough, some cable with too much voltage lose will not give enough current when pluged so that can not charge ) , problem should be of the software.
Besure if you have multi user environment. Only one user can use Activesync on Windows XP platform.
Do reinstall Activesync and do check the usb cable with any other computer nearby you if you are not living in desert.
I actually am having a similar problem connecting my AT&T 8525 to my computer. It charges, but won't sync. I had to start using Bluetooth in order to connect.
on the tytn go to settings -> connections -> usb to pc and untick the box
Hello, I am new, from Spain.
Since yesterday, My ARC S, when I try to connect to PC via USB, shutdown netbook. In PC, when connect, USB connections stop working until I reboot PC...
Charge is ok, only by AC Adaptor. But if I move connector, stop charging for moments, until I connector again. But in PC usb, is impossible to make it works. Not charge by usb pc.
I have tried other cable, but the same
Is a shorcircuit in microusb connector? How can i repair?
once I have connected usb, but just 1 or 2 times, otherwise fails
This case covers in ebay Inludes connector microusb? If i buy this, I will have a new connector microusb?
Thanks a lot, excuse me for my English