[Q] My ARC S not connect USB PC :( - Xperia Arc General

Hello, I am new, from Spain.
Since yesterday, My ARC S, when I try to connect to PC via USB, shutdown netbook. In PC, when connect, USB connections stop working until I reboot PC...
Charge is ok, only by AC Adaptor. But if I move connector, stop charging for moments, until I connector again. But in PC usb, is impossible to make it works. Not charge by usb pc.
I have tried other cable, but the same
Is a shorcircuit in microusb connector? How can i repair?
once I have connected usb, but just 1 or 2 times, otherwise fails
This case covers in ebay Inludes connector microusb? If i buy this, I will have a new connector microusb?
Thanks a lot, excuse me for my English

Related

Is the Sync cable proprietry?

Should any USB sync cable work with the Kaiser? I just bought a Belkin USB to mini USB retractable sync cable and it charges the unit but wont sync it. Is the USB cable faulty or this by design?
logger said:
Should any USB sync cable work with the Kaiser? I just bought a Belkin USB to mini USB retractable sync cable and it charges the unit but wont sync it. Is the USB cable faulty or this by design?
Click to expand...
Click to collapse
Maybe settings on device or PC are not right?
These cables are just mini USB and that itself has no effect on the syncing process. (I use any mini USB cable I can find whenever and wherever I am and it always works for me)
Same here I use whatever lead I can find, usually the PSP one.
Thanks for the quick answer guys. I suspect my Belkin Cable is a dud. Just swapped it with my PS3 cable and it works fine, as does the original HTC one. So will return the Belkin and get another. Good to know I can use any USB cable form now on. So Thnx for clearing this up for me..

HD2's data cable.. is it micro USB?

I can't seem to find a usb to "whatever it is" wire selling..
is it a standard micro USB port?
leobox1 said:
I can't seem to find a usb to "whatever it is" wire selling..
is it a standard micro USB port?
Click to expand...
Click to collapse
yes... u r rite... itz a MICRO USB...
But it can't supply power to a USB device, so it can't be used like a PC USB port. It's only good for recharging and syncing.
so if i want to buy an additional wire, i look for a USB to MICRO USB wire right? no need to buy from HTC right?
cause i saw one usb that is smaller but it doesn't fit.. is there a MINI USB port too?
am confused
Stephen Selby said:
But it can't supply power to a USB device, so it can't be used like a PC USB port. It's only good for recharging and syncing.
Click to expand...
Click to collapse
Erm yes it can,
Actually better take the device with you. Sellers here told me there is like 7 different very similar connectors. However this one should be the standard micro USB, which is supposed to be universal charger/sync cable in the future (at least in EU).
And yes, of course, there is mini USB. And there even are more versions of mini USB, for example HTC used their own.
You had better use HTC cables. HD2 is microusb, but not all microusb cables are good for HD2. Like iPhone, it takes a large charging current, and many no brand cables cannot do it. I've got a third party cable that syncs only, but if charged from the PC, the HD2 will say that the charging current is too small. Battery actually drops when I connect HD2 to PC using this cable (because my options set it that backlight is always on when HD2 is connected). Other combinations are OK:
original cable + AC plug: charging OK
original cable + PC: charging OK
third party cable + AC plug: charging OK
third party cable + PC: "insufficient charging current"
Be careful with cables- you'd be better to buy the genuine HTC version.
Many USB/MicroUSB cables are for charging only, and don't have the data pins connected. Thats OK if you just want to charge it while you are away from your main PC or power supply.
You can also buy a miniUSB/MicroUSB adapter for charging using and older miniSUB charger, but again these don't have the data pins connected.
I bought a number of 3rd party USB to microUSB cables a month ago for sync and charging (office, PC, bedside charging), so far so good... no issues (maybe I'm lucky). The OmniaII uses the same connector, so I'm using the HTC car charger to charge both.
I bought Nokia's cable (for E71,N97,etc.) and it work just fine with charging from laptop. much cheaper than HTC in here.
if you are going for the cheapo option...
http://shop.ebay.co.uk/?_from=R40&_trksid=m38&_nkw=MICRO+USB+SYNC%26+CHARGE+CABLE+for+HTC+HD2+HD+2+Leo+T8585
i got a couple from ebay - arrived the next day. - charge/sync fine.
charger from iPhone
The iPhone charger coud be used for charging HD2. Just plug the microUSB cord instead of iPhones and ... voila. The same outputs
N86-8megapixel cable doesnt work..
So I managed to leave my HTC cable at work (2 days after getting the Telstra HD2 in OZ) and now I am on 4-5 days leave from work and really want to tinker with my phone. I think I may end up having to go back to work to collect the HTC cable - as below... challenge to get non-HTC cable to work.
I found that my wife's N86-8megapixel nokia has a similar micro-usb cable.
When connected to the PC the phone starts charging and the PC does the "doo-doop" sound a "appears" to connect to the phone, but active sync cannot detect the phone \ sync.
I see others have had success with nokia cables - I am wondering if there is something wierd going on.

USB cable

Probably a daft question!
Is there any reason I cannot use a "stock" non HTC usb cable for syncing / charging. Is the HTC cable any different to any others e.g. Nokia?
Surely one cable is the same as another!?!
You can use ANY USB/microUSB Data/Charge Cable ;-)
I also do so :-D
no, charging doesn't really works, not for most cables. Unless it is explicitly marked for HD2 or iPhone. It seems they follow a new specifications. Older cables do not carry as much current. With connected to PC via a third party cable, my HD2 pops up a screen saying that the charging current is insufficient.
You can use any USB 2.0 A Male to Micro 5pin Male. Basically the typical USB to micro USB cable. I'm using a Blackberry micro usb cable (plugged into laptop) to charge my HD2 at work.
Usually sells for $2-3, or less, for 1-2 feet cable. Overpriced if you pay more. I bought the BB cable from Amazon, though I usually buy cables from monoprice.com.
i have a cable that comes with the car charger that charges the device when connected to the pc but cannot be used to sync files. when connected through this cable, the pc does not recognize it at all as an external device as it recognizes a dvd, cd, etc. in its driver.
I'm using a Blackberry cable in the office and works like a charm; I have the original at Home.

USB Problems

Hey Guys
So I am having a very unique problem. I can charge my phone perfectly fine when it is connect it to the wall sockets. I put the mini usb plug completely into the phone and it charges fine. But when I connect to the my computer (mac, PC and ubuntu) it doesn't charge. If I plug the cable completely into the phone it doesn't charge. But if I partially plug it in, then it charges, but the computer doesn't recognize the sandisk card or my phones memory (so I can't navigate through the file directory).
It all started when I tried to charge my phone through the car stereo USB in my car.
Please if anybody has a solution to this problem, I would really appreciate it.
Thank you All.
Were you using the official car charger (that came with the phone)?
Maybe you using a low voltage/deffective USB port on your PC (mine has a 5 in 1 Card Reader with an extra USB port that is cheap and doesn't charge my iPod, for example)...
Sent from my Milestone 2 XDA App
Try different port or get a replacement for your cord.

[Q] USB flex cable? help me please

So I plugged in my phone to a car charger and next thing you know I try plugging it in to my PC my TV and neither will recognize it. I'm guessing. The car charger fried something in my USB port flex cable. So before I go and buy a new flex cable I wanted to know if its something within the flex cable that burned out and thus won't allow the data pins to correctly connect... What do you guys think

Categories

Resources