Related
right now, i found i can not synchronize my xda mini s with my computer, everytime it stopped at 'retrieving setting', and lasted for a long time then nothing happened. i tried to reinstall microsoft activesync five times, and tried the phone in six PCs, but got the same problem everytime, however in the same computers, my exec was working fine.
any idea for this problem, or i have to change a new one in o2 shop?
by the way, can i change a new one in bath o2 retail shop, as i bought the phone in bristol ten days ago?
thanks a lot
it's an Activesync problem not the device
There's a thread on here about Activesync 4.0/4.1 not working over USB. It's usually a firewall/network manager issue. I don't know how to post links here so sorry, try searching the threads for activesync (and 'resolved').
Ihave the same problem and I still can't fix it. Microsoft are involved and are working on it.
Cheers, Dave
Check the Wiki - I put some updated info in there...
Sygate seemed to be the cuplrit
I just turned off Sygate Personal Firewall and it sync'ed straight away.
I think I'll try and reconmnect it with Sygate up now that it has done it, but if that doesn't work, I'll either reconfigure Sygate or turn it off when I want to sync (I'm only sync'ing music on this PC).
Hi All,
I have spent all day trying to fix this but havn't got anywhere, has anyone got any ideas?
Basicly, both my wife and I have a vario. I can sync mine fine, but when I come to plug in the other one activesync initialy ignores it then says its connecting but then gives up. Windows displays a network icon with an ! saying limited or no connectivity.
After a while the wizard says"Unable to obtain a server assigned ip address".
I tried.....
Reinstalling active sync (4.1) and putting my wife's phone in first
restarting phone (soft)
turning firewall off
tried my old c500, worked fine
....in many combinations, but no luck.
As i have synced other devices fine, it must be due to the fact that I have two wizards and AS or XP is getting its knickers in a twist.
I suppose it could be worse - it could be my phone that won't sync
John
I just tried the non-syncing vario at a friends house and it worked fine!
I feel a XP reinstall coming on (really don't want to do that)
Any ideas?
I don't think reinstalling XP is going to help. I have exactly the same problem. One will sync the other not and I get the IP error thing.
This only started recently after I had to hard reset my Wizard.
Last night I succesfuly synced over bluetooth with both devices but I still cant use USB with one of them.
I have the same. Can sync with IR but not USB.
hi forum...
I have an imate JJ & have been using it for 3 months now..
all of a sudden it refuses to synchronize with my laptop.
I tried the following but didn't wrk:
1) deleting the existing partnership.
2) uninstalling & reinstalling activesync.
3) tried installing both activesyncs( the one which came along in the cd & the one we have on our ftp).
4) hard resetted my device.
none of the above have solved the problem. my pc does recognize the ppc as a lan connection as it should. the activesync green icon in the taskbar also goes green && starts rotating, but it just keeps saying "Connecting" but never actually connects..
Please Help Me..
Thanx,
mOrph...
Hey,
Pune huh? Which part of Pune? I used to stay in Wanowrie Was a student at BVP Medical University.
Anyhoo, when you reinstall AS, make sure its on a drive different from the original install. Also make sure your firewall's are disabled (even the native SP2 firewall).
Hopefully, it should sync properly now. Let us know if it doesn't and we'll help you sort it out
Cheers.
Did you clear the notifications or something? If you used pocket mechanic or the like and delete one of them AS don't (& won't) work until you HR again, afaik.
Joe
that is correct. you can verify it by manually starting repllog on the PDA while ActiveSync tries to connect
joebongo said:
Did you clear the notifications or something? If you used pocket mechanic or the like and delete one of them AS don't (& won't) work until you HR again, afaik.
Joe
Click to expand...
Click to collapse
I screwed up my AS on my JasJar doing some foolish & ignorant cleaning with ScareyBear's CheckNotifications, but was able to re-enable AS using this tool (no hard reset needed)!
http://www.cs.pitt.edu/~jmisurda/ppc/blog/index.php?entry=entry051203-201515
Thanx all u guys
Hi guys.. thank u all for the suggestions... havent tried any as was out of town... will do dat n let ya guys know if it worked...
btw, am in aundh, pune
hi, this also keeps happening to me.. not being able to sync thorugh USB. I am using bluetooth since a copuple of days and since that no problems, no worries. Just use BT to sync. hope this helps.
HELP
hi u guys...
I tried syncing after disabling the firewall of XP SP2 but it didn't help...
what else can be done?
Syncing through bluetooth is not an option as my laptop has a builtin bt with toshiba drivers which doesn't allow me to sync. && i'd rather not overwrite the toshiba stack with the widcomm... don't wanna add a prob to my laptop to remove one from my ppc...
is there any foolproof way of getting back at syncing thru usb?
pls help
regards,
morph
Happend to me
I solved the problem by connecting ppc to a laptop usb,then connected back to my main macine and bingo
_^.^_
:-(
Guys...
Activesync still not happening...
Pls help
When I got this problem, it was due to synchronising something it didnt want to sync, namely favourites and web pages. Try changing your sync settings to say just contacts, then just calendar, then just tasks etc... and work down the list until you identify the problem.
I would guess its your favourites.
let me know, and we will commence a fact find and test process for alternatives 1 by 1.
Activesync problem
Open Activsync but Don't turn your XDA EXEC on before you plug in the USB. Let acivsync turn the device on then give it a minute to find the changes. Hope this helps.
Re: :-(
morphosin said:
Guys...
Activesync still not happening...
Pls help
Click to expand...
Click to collapse
Did you try installing the tool I linked to above? I've attached it to this post, it helped me restore AS when I somehow deleted it off my device.
I sync via bluetooth since i had those problems as well, and NO problems since then. Moreover, using BT is much much faster, at least for me.
recommend.
gotta love it when you try to help, offer multiple suggestions to some dude pleading for assistance multiple times, then get zero feedback as to the effectiveness of the fix (s) offered.
hey "morphosin" what was the outcome, all fixed?
simon_darley said:
When I got this problem, it was due to synchronising something it didnt want to sync, namely favourites and web pages. Try changing your sync settings to say just contacts, then just calendar, then just tasks etc... and work down the list until you identify the problem.
I would guess its your favourites.
let me know, and we will commence a fact find and test process for alternatives 1 by 1.
Click to expand...
Click to collapse
Sorry for the late reply dude...
I tried all possible solutions including your last given solution of trying to remove favorites... The problem is that On a fresh install of activesync, it doesnt even take me t the window where i choose my syncing options. It just keeps going green & round & says connecting. I manually tried to go to options through the menubar but everything except help is grey(disabled).
As for alnwick's suggestion.. I always have been doing that. Even on my Himalaya when i had Magneto, i used to switch off the device & let activesync wake it up.. It always helped but not in this condition... Dunno why... Its really sad that two M$ OS have so muchanimosity between em...
Is there any other solution that strikes u guys?
Hey Simon.. Really sorry buddy... I do appreciate all your guys help ALOTTTT... only problem is that my work hasnt been allowing me to be regular for last couple of days...
Thanx all for ur precious time....
Always
mOrph
PS : Problem not solved as yet
Hi,
I have the same problem with my Exec too. However it doesn't happen so often. Probably once in every 10 successful sync. I always managed to fix it using the "old-fashion" manner.
1. Unplug your USB from your Exec
2. Reset your computer
3. Plug it in again once your computer has finish booting the OS.
It is pretty basic and I guess that you have already tried it yet. It works for me all the time when I do so. Sometimes I wonder whether could it be the USB connector on the Exec that is faulty or my computer USB port or the cable.
Hope your Exec will be up and running properly again.
Regards,
Johnnie
johnnie82 said:
Hi,
I have the same problem with my Exec too. However it doesn't happen so often. Probably once in every 10 successful sync. I always managed to fix it using the "old-fashion" manner.
1. Unplug your USB from your Exec
2. Reset your computer
3. Plug it in again once your computer has finish booting the OS.
It is pretty basic and I guess that you have already tried it yet. It works for me all the time when I do so. Sometimes I wonder whether could it be the USB connector on the Exec that is faulty or my computer USB port or the cable.
Hope your Exec will be up and running properly again.
Regards,
Johnnie
Click to expand...
Click to collapse
Hey Johnnie...
Thanx alot for the suggestion buddy.. Unfortunately, i tried that long time ago... Also, in my case atleast it cannot be the h/w (USB Connectors on ppc or pc or the cable) as i used to sync absolutely fine with 100% hitrate. Infact, every time u have a problem try this buddy :
1) Go to task manager of ur ppc & turn off everything.
2) Switch off ur exec.
3) Attach cable & allow the activesync to wake up your device.
It might increase your hitrate.
For all the other kind souls here...
I am attaching a snapshot of how my activesync window looks while it is trying to connect.
Thanx All
mOrph
Re: :-(
galt said:
morphosin said:
Guys...
Activesync still not happening...
Pls help
Click to expand...
Click to collapse
Did you try installing the tool I linked to above? I've attached it to this post, it helped me restore AS when I somehow deleted it off my device.
Click to expand...
Click to collapse
Hi Galt...
I tried the tool you provided but that too was unsuccessful in solving the problem.
It really didnt gimme any options though when i ran it on my JJ. I assume thats how its supposed to work. It just showed me a white screen with two options
Exit & About...
Any other suggestions are absolutely welcome dude..
Thanx mOrph
I have similar problem: Activesync tries to connect and after some time it says, it could not connect.
When I make a reset with the reset button, it works again for some time.
hmmm, what could it be?
Sorry in advance for another AS issue. However, search as I may, I couldn't loacte anything like this...
Anyhow, my T-mobile MDA (US) has about driven me nuts with this issue. I was able to sync successfully a few times. However, now when I plug in the MDA via USB (direct, not through any hub), it will connect but when the device starts to sync, I get the following error from ActiveSync:
"Synchronization cannot be completed successfully. Reconnect your device and try again. If the problem persists, see the Microsoft ActiveSync troubleshooter in Microsoft ActiveSync help on your desktop computer".
I've uninstalled activesync, deleted all registry entries, reinstalled, ensured proper firewall configuration, changed com ports, disabled my internal WLAN card and BT card...and nothing. Short of a hard-reset, I am at a total loss.
Has anyone else experienced this issue? Any work-arounds?
try to install everything again and don't plug it on the usb hub...coz power is not sufficient on a usb hub .. just try.
I'm getting the same error exactly on my Cingular 8125. plugged into pc directly via USB, tried reinstalling AS several times to no avail. Please help. I don't want to have to hard reset. :? Thanks
As I mentioned in my OP, there is no USB hub involved in my setup. This is a direct USB connection from my PC to the MDA.
ooppppssss
hehehe.. Are you syncing via the cradle or a hotsync cable ?. Sometimes if the cable is also charging, the connection is not sucessfull until it's fully charge and the top light is green.
I've had this problem myself before now.
Rockshow...are you also running SPB Weather?
No, i'm using spb pocket plus 3.1 though, but its the first thing I installed and i'm just now having problems after 3 weeks without any problems
Firewall
Hi,
Do you use a firewall (Windows XP or other one)
If so, check this out.
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
It worked for me!
grtz,
Pfeffa-rah
I'm also facing the same problem with my tmobile-mda(us). I had spbplus but after this problem, uninstalled it. but the problem still exists.. any help ?
i noticed 2 things with my sync problems which are now resolved. one problem was with softick card export, it was causing some errors which were gone when i uninstalleed it. but then had another problem, it would disconnect while syncing randomly. i found out that my cable was damaged(some dirt was in the connector which thankfully ruined the cable and not the phone part) also when u first connect ur device it shows that network connection in the taskbar with the bouncing yellow ball. if u right click it and click on repair that helps some time.
RoCkShOw said:
No, i'm using spb pocket plus 3.1 though, but its the first thing I installed and i'm just now having problems after 3 weeks without any problems
Click to expand...
Click to collapse
What's the significance of PSB Weather? I've had sync problems, some days it works some days it doesn't. I can cope with that, but sometimes SPB weather doesn't update it self for days, which is a bit of a pain!
Incidentally I recently hard-reset my device, reinstalled SPB Weather and can nolonger select the option of syncing from weather.com, which limits my choic of available cities. Any ideas?
RoCkShOw said:
No, i'm using spb pocket plus 3.1 though, but its the first thing I installed and i'm just now having problems after 3 weeks without any problems
Click to expand...
Click to collapse
What's the significance of PSB Weather? I've had sync problems, some days it works some days it doesn't. I can cope with that, but sometimes SPB weather doesn't update it self for days, which is a bit of a pain!
Incidentally I recently hard-reset my device, reinstalled SPB Weather and can nolonger select the option of syncing from weather.com, which limits my choic of available cities. Any ideas?
Try killing and restarting activesync on the phone. I've only had that problem once and that sorted it.
I had the same problem.
Found out it was my virus protection (TrendMicro PC-Cillin) When I disable my virus protection it syncs, otherwise it only connects and then gives the error you described.
I had the exact same problem untill a few minutes ago when I did a hard reset. I back up my all my data using Sprite but when I restored it gave me the same error message. I gave up and did another hard resetjavascript:emoticon(':x')
Mad. Right now I'm reinstalling all my programs. I would love to know how to fix this without a hard reset just in case it happens again....javascript:emoticon('')
Crying or Very sad
Hi:
Having here the same problem. Still looking for a solution... ANYBODY??
fadewiles said:
Sorry in advance for another AS issue. However, search as I may, I couldn't loacte anything like this...
Anyhow, my T-mobile MDA (US) has about driven me nuts with this issue. I was able to sync successfully a few times. However, now when I plug in the MDA via USB (direct, not through any hub), it will connect but when the device starts to sync, I get the following error from ActiveSync:
"Synchronization cannot be completed successfully. Reconnect your device and try again. If the problem persists, see the Microsoft ActiveSync troubleshooter in Microsoft ActiveSync help on your desktop computer".
I've uninstalled activesync, deleted all registry entries, reinstalled, ensured proper firewall configuration, changed com ports, disabled my internal WLAN card and BT card...and nothing. Short of a hard-reset, I am at a total loss.
Has anyone else experienced this issue? Any work-arounds?
Click to expand...
Click to collapse
I had the same error today. But luckely i was only using ActiveSync 4.0, so i just updated to version 4.2 (I had to because of the new rom upgrade). I haven't had the problem since. But i have only tried it once... so i donno.
same problems with my Neo today.
Funny thing is that I could sync for 3 days then it suddenly stops. USB is recognized but then the "connecting" sign is just on and on and on.
I've tried all the methods from Microsoft web and from you guys in this forum but hopeless. (except for Re-install XP sp2)
Still searching the solution
Cheers
same problems with my Neo today.
Funny thing is that I could sync for 3 days then it suddenly stops. USB is recognized but then the "connecting" sign is just on and on and on.
I've tried all the methods from Microsoft web and from you guys in this forum but hopeless. (except for Re-install XP sp2)
Still searching the solution
Cheers
Yeah,
I seem to be having the same problem. It connects, then just hangs at "Looking for Changes." It doesn't even load up the list of things that it normally used to showing what it's comparing to sycn up. It was working FINE until just now....I've resetted the PDA, and my comp a few times already, and I even allowed all those ports access in both directions, both TCP and UDP through Norton Firewall...I'm completely at a loss....Any ideas?
--Q
Hi All,
failry new memeber when it comes to posting but have been using you guys as an essential source of bugfixing, problem solving and general HTC MDA advice since my TYTN.
I have spent sometime searching but not been able to find anyone with an issue similar to mine.
So heres the thing, recently exchanged my TYTN for a TouchHD and overall extremely impressed with both the handset and dev work done on here already.
I am running Dutty's 1.7 rom coupled with Radio ROM 1.09.25.35 all has been working and syncing wonderfully, however today when i try to sync up to my laptop to upgrade the radio to 1.10.25.25 i cannot get the darn thing to connect to activesync at all.
I am running XP SP3 and activesync 4.5 (again successfully until today)
I am using a non HTC USB lead which i know is generally a no no, however i sync'd up my kaiser with this lead for over a year and have been successfuly syncing my HD until today. I have tried an alterante USB lead just in case, again one with which i had no issue on the Kaiser.
I have tried to sync with the firewall on and off, also with my AntiVirus on and off
I have tried disabling Start_settings_USB-PC "enable faster data sync" to no avail.
I have tried the cusomary uninstall and reinstall of a fresh MS downloaded Activesync again no joy.
When I connect my HD to the pc and select connection type "Disk Drive" it recognises it instantly and allows me to browse the microSD card
When i connect with connection type "ActiveSync" it opens activesync, and displays connecting for smoe time and then decides it can't connect and offers me a diagnostic scan.
I have run the scan and saved the log file for information.
so basically the laptop can see my HD, activesync recognises a device has been connected via USB but refuses to finalise the connection. Oh obviously i have tried the "connect all using the connection" setting in activesyn on the HD as well. Figure the more i can tell you about what i have and havent done now the more time it saves you guys.
Its almost as if a process or service has been stopped or deleted on the device but i am buggered if i can figure if or what that maybe.
Any help appreciated guys. Obviosuly i will as a matter of course re-attempt all the above with the official HTC USB cable when i get home, but honestly dont see this being the issue considering the history of effectiveness of these cables.
I look forward to a flurry of interesting responses for me to try. Big thanks to all those who have made my WM PDA experience spot on to date.
Dboy
Update as promised.
Have got home and tried to connect using the HTC cable but still no joy.....
What could possible have gone wrong ?
No one any ideas ??
Hello,
I got a very similar issue, after some investigation I found out that it was my calendar causing this strange connection behavior.
Please do the following test,
1. delete your phone in active sync
2. reconnect your phone with the PC using the USB cable
3. When it asks for the synchronizing options (by default contacts, calendar,E-mail, favorites & M office one Note are ticked), REMOVE the tick of the calendar.
4. After finishing the setup wizard the synchronizing process will run as expected
So in my case I'm having trouble with the calendar, why ? I don't know but maybe someone else might have an explanation.
Good Luck
I encountered similar problems with ActiveSync previously but it was solved not via a soft/hard reset of my HD, but after I reboot my PC. Hope this can help you.
Note: I rarely shutdown or restart my laptop. I simply leave it to hibernate.
Reset HD Touch to get syn again.
One day could sync next day could not.
In the end did soft reset of phone all OK now.
Think the problem is I took a photo and it took ages to save it?
Thinking of put small hole in case so I can do a soft reset without the pain of unclipping cover. Any thoughts.