Has anyone got a working screen (the LCM or LCM + Digitiser screen) for a XDA / sx56/ qtek1010 for sale?
Related
Hi ,please could someone tell me where can i buy 1 LCD for my Himalaya to the better price ?
Thank you
For the beginnig, you need to know - which LCM assembly is in your device. There were two different screens - Sony (with flat, side-slot connector) and Toppoly (two-row white plastic connector), see back of LCM assembly for 60H00?? number for identification.
JDark said:
For the beginnig, you need to know - which LCM assembly is in your device. There were two different screens - Sony (with flat, side-slot connector) and Toppoly (two-row white plastic connector), see back of LCM assembly for 60H00?? number for identification.
Click to expand...
Click to collapse
Hi thank you for reply,
i have screen with flat
What s wrong with your old LCD ? if it s the Touch screen broken ,,,you can change it only ,,, but if it s the crystal screen ,,you must chanege it all
ofcourse the touch screen only is cheaper
Call me if you like
20123382923
Hello there,
I want to change the lcd screen of my niki, wich has been damaged following a shock.
I found a store which gives me the option to sell me only the screen and the digitizer, or make the replacement by themselves for an extra cost of 20€.
My question is : is it easy to replace the whole block (lcd + digitizer) and does someone here knows about an instruction guide ?
Thank's in advance and excuse me for my poor english...
I'll describe everything from scratch so you'll know what the problem is. So, I had 2 MDA Vario II, both developed a fault (on one when I pressed the button on na hardware keyboard it showed two letters on the screen instead, on the other the backlight under a couple of letters stopped working) so I dissasembled them and out of two faulty, I had one working and one working so-so.
As I wanted the other one to be sorted (the connector to the hardware keyboard was burned in some places on the mainboard and the keyboard tape connector as well), I was shopping for some faulty ones on eBay and yesterday I bought an original TyTN with LCD screen not working. I dissasembled both of them and connected the full LCD fascia with the screen to the mainboard of the TyTN (so that now I've got the LCD housing from T-Mobile, but the rest from HTC) and everything is working perfectly... however I'd like to use TyTN only housing and possibly buy a new one on eBay (but keys on the bottom are different for Vario II and TyTN).
I do know that LCD screens are incompatible, in the TyTN I have the HITACHI and in Vario I got the TOPPOLI (however the whole thing works with the mainboard, as both of them have the same product codes)...
But does someone know if I put the whole LCD from the Vario including the tape and top buttons in the fascia of the TyTN and connect it to the bottom buttons circuit, it will actually work. I will do it anyway, but if someone was doing it in the past that would motivate me to fiddle with it tomorrow
Sorted.
For all those with NOT working LCD screens/keyboards/mainboards...
As I the LCD screens are not compatible and we often do not know what we are going to get off eBay, lots of people face the problem of buying something that may not work with their version.
I needed the mainboard and the keyboard in my Vario II (HERM300) and I bought HTC TyTN (the original one, HERM200) with not working LCD (backlight working but nothing could be seen on the screen). As you may be aware that TyTN has got an extra button for 3G and Vario II not, I was wondering whether the whole thing would work. I replaced the full LCD screen with the tape including the two top buttons and connected it to the bottom circuit of the original TyTN. After assembling everything back, I switched it on and it's working without any problems. So if you have the same problem and can get hold of a cheap Hermes for spares on eBay, as long as you replace the whole lcd with tape it'll work regardless of your version...
Useful info thanks. That question was asked before and I don't think anyone gave an answer. Good to know it will work despite the different button layout.
cheers
Mike
Hi
Yesterday I Replaced my Speaker, when I opend my HD2 I accedently lifted up the Glas from the LCD. I think the Glas is the Digitizer too. So now when I use the Touchscreen it clicks Randomly or slides randomly. What could cause the Problem and can I repair it?
thx for your help
if im not mistaken the digitizer is attached to the lcd glass facing down. might need to replace
you can replace the digitizer without the lcd panel, but it isn't easy to replace it because you need to seperate the digitizer from the lcd and the lcd can breake. it is easier to replace the digitizer with the lcd panel in one peace.
unfortunately it is more expensive than only the digitizer.
if you replace the digitizer you have to stick it to the lcd panel and it must be in the right position(as before)
After a few tests I found out that not the Digitizer is broken. Its a little tape like thing on the side of the screen(digitizer). Is this possible?
Sent from my HTC HD2 using XDA App
hey guys,
i crashed my nexus 4 today, can u tell me from the pictures whether its just the Touchscreen Digitizer i need to replace to get it fixed? hardware buttons are working and i can turn it on/off.
ty
https://www.dropbox.com/s/hmmjm1bkevunjyo/IMG_20140310_201933.jpg
https://www.dropbox.com/s/xx5c3hobbv37y1b/IMG_20140310_202025.jpg
LCD screen is glued to front glass/digitizer. Its possible to change only digitizer, but don't think you will do that at home ... Easiest way for you - change all LCD-digitizer assembly ...
For education purposes you can have a look here : Digitizer replacement