I just dropped the remote of the tv on my X7500 and now there is a small dent in the touchscreen. The LCD is not damaged. Does anybody know whether there is a fix for this, eg can the touchscreen only be replaced, or is it part of a total module with the LCD panel?
Doodle said:
I just dropped the remote of the tv on my X7500 and now there is a small dent in the touchscreen. The LCD is not damaged. Does anybody know whether there is a fix for this, eg can the touchscreen only be replaced, or is it part of a total module with the LCD panel?
Click to expand...
Click to collapse
As far as I know it is possible to detach the touchscreen from the main LCD.
The touchscreen is a thin film surrounded by a metal frame which clips over the edges of the LCD (like the top part of a board-game box!). It is fiddly to remove without the right tools and is furthermore connected by a small ribbon connector.
It may or may not be cost-effective to buy the touch screen - I have a big scratch in mine and would like a new screen, along with some other bits but I don't know where to source components.
Hi, i broke my Elfin display (T-mobile unlocked) my screen looks like this: (touchscreen is still working):
. I think i need the entire screen+digitizer thing and not only the digitizer? therefore this ? http://cnn.cn/shop/touch-screen-p-1900.html
Unlucky
The touch screen has 2 parts. The plastic outer screen is the digitizer and the lcd screen is the one underneath. When you take it appart the digitizer stays in the top of the housing and the lcd is attached to the middle bit.
Looks like you broke the LCD for sure but maybe the digitzer is ok - you will see as soon as you take it apart. The post here about how to disasemble a touch has clear pictures so check it out its quite easy to take apart if you follow the guide.
Yeah that definitely looks like you broke the LCD which is underneath the digitizer. Either take it to a service rep...or if you think you're up to it.....you can attempt to take the phone apart and replace the LCD yourself.
Hi guys,
What could be the possible reasons for a touchscreen and the capacitive buttons to stop working?
I purchased my Huawei U8800 only very recently but it was purchased 2nd hand. The phone came pre-installed with a custom rom, which is this one here: http://forum.xda-developers.com/showthread.php?t=1481168
I've had very minimal use of it ever since I received it, due to the reason that I have exams as I'm an UNI student. Therefore, I haven't modified the phone in any way, i.e I have not overclocked it or flashed a different kernel or recovery etc. The only thing I've done is installed GO SMS PRO and used it for txting and calling, that's it.
At first, everything seems to work fine. But on my 2nd day of use, the touchscreen started acting weird, where the right hand side of the screen stops working for no reason, as well as the 2 capacitive buttons on the right half of the screen (HOME and SEARCH). Then after a while, the BACK capacitive button on the left half of the screen stopped working, and eventually all 4 capacitive buttons and the entire screen stopped working.
The phone still turns on, but the entire screen doesn't pick up any finger input and there isn't any haptic feedback or vibration from the capacitive buttons. When I boot into the recovery, this is also the same.
So I contacted the seller about this, and he advised me to flash the Cyanogenmod 7.2 rom to see if this fixes the problem. It didn't, the touchscreen still doesn't work.
I'm wondering if this is related to the digitizer, which is the part of the phone that sense your finger inputs? If not, what are the other parts of the phone that could relate to the capacitive buttons and touch screen?
Definately a digitizer problem. The capacitive buttons are part of the touch screen, the touch screen is extended over the bottom of the display.
You should buy a new one from eBay or similar. If you want to buy it with a frame (black part on the front), you will have to open your phone to see if the front speaker is big or small. There are two types of front speakers and they are not cross-compatible. If you just want to buy the digitizer, you will have to remove the old digitizer from it's frame and add some glue on the new one to make sure it won't stick out.
If you don't want to mess with your phone, I am sure there are paid services that will do it for you, since replacing the digitizer is fairly easy.
Blefish said:
Definately a digitizer problem. The capacitive buttons are part of the touch screen, the touch screen is extended over the bottom of the display.
You should buy a new one from eBay or similar. If you want to buy it with a frame (black part on the front), you will have to open your phone to see if the front speaker is big or small. There are two types of front speakers and they are not cross-compatible. If you just want to buy the digitizer, you will have to remove the old digitizer from it's frame and add some glue on the new one to make sure it won't stick out.
If you don't want to mess with your phone, I am sure there are paid services that will do it for you, since replacing the digitizer is fairly easy.
Click to expand...
Click to collapse
thanks for your reply mate!
Ok so I've found this one here:
http://www.ebay.com/itm/Original-To...Glass-For-Huawei-U8800-Ideos-X5-/170721993712
Since it says it's "original", I don't have to worry about the speaker problem right?
chaoscreater said:
thanks for your reply mate!
Ok so I've found this one here:
http://www.ebay.com/itm/Original-To...Glass-For-Huawei-U8800-Ideos-X5-/170721993712
Since it says it's "original", I don't have to worry about the speaker problem right?
Click to expand...
Click to collapse
They are selling the digitizer, so there will be no problems as it's only the digitizer glass and not the frame around it. The frame itself is holding the digitizer and the speaker so that's why there may be issues when buying the front cover.
If you need a disassembly tutorial, check my Mediafire (signature) -> Documents -> U8800 Basic Maintenance Manual. It's the official disassembly guide so you can be sure you are doing it right .
Blefish said:
They are selling the digitizer, so there will be no problems as it's only the digitizer glass and not the frame around it. The frame itself is holding the digitizer and the speaker so that's why there may be issues when buying the front cover.
If you need a disassembly tutorial, check my Mediafire (signature) -> Documents -> U8800 Basic Maintenance Manual. It's the official disassembly guide so you can be sure you are doing it right .
Click to expand...
Click to collapse
Wait, that doesn't have the frame around it? I thought the black part surrounding the glass is the frame? I'm confused.......
I just want something that looks exactly like shown in that Ebay listing photo, where it has that bit of the connector part that you push into the motherboard (or whatever it's called on the phone).
chaoscreater said:
Wait, that doesn't have the frame around it? I thought the black part surrounding the glass is the frame? I'm confused.......
I just want something that looks exactly like shown in that Ebay listing photo, where it has that bit of the connector part that you push into the motherboard (or whatever it's called on the phone).
Click to expand...
Click to collapse
On your listing, it does not have frame.
If it's without frame, it is simply the front glass with connector. If it is with the frame, it has the black curve too (and speaker with led).
See this:
Without frame.
With frame.
Hope it makes sense now
Blefish said:
On your listing, it does not have frame.
If it's without frame, it is simply the front glass with connector. If it is with the frame, it has the black curve too (and speaker with led).
See this:
Without frame.
With frame.
Hope it makes sense now
Click to expand...
Click to collapse
Ahh ic ic.....so would I need to use glue to stick the digitizer glass onto the frame?
chaoscreater said:
Ahh ic ic.....so would I need to use glue to stick the digitizer glass onto the frame?
Click to expand...
Click to collapse
Yeah, but not much. Maybe you don't need to add any glue at all, the old one might hold it too.
u8800-51 touch screen bottom not responding
Blefish said:
On your listing, it does not have frame.
If it's without frame, it is simply the front glass with connector. If it is with the frame, it has the black curve too (and speaker with led).
See this:
Without frame.
With frame.
Hope it makes sense now
Click to expand...
Click to collapse
hi blefish
just posted a similar question:
http://forum.xda-developers.com/showthread.php?p=39201328#post39201328
is it the same solution? (the 4 buttons at the bottom do not work as well as the lower half of screen)
my speaker is 15 mm by 5 mm long (i looked inside). is it big or small?
all the ebay posts do not mention a frame - i will be happy not to mess with the glue
thanks
huwaei G 510
Hi guys,
I did have the same problem with a Huawei G 510. Digitizer broken and replaced, but still not working.
I have no action on screen. It lits but i can't press any button. Either the 3 buttons are working.
Checked the plug, checked some voltage in the pins.
Any other ideas ?
Thanks in advance,
Miltos Matt
Hi
I've dropped my HD2. Everything is working, including touch screen, I can unlock the phone, I can answer the call, but screen is black, not broken.
What should I do? Does the lcd screen replacement will be sufficient? In that case, could the screen be ok, but some other display "processor" could be dead? I'm asking because I'll try to this on my own.
Could simply be the lcd cable has slipped slightly but probably more likely an LCD replacement needed.
You need remove rear housing & have a look & make a decision from your findings/testing.
hello
I've got a little update - lcd screen is working well - I mean it displays the image, the only malfunction is backlit. Right now when i use flashlign I can actually see whats on screen. Do you have experience or think that backlit connection can be repaired? Do You have any schematics for hd2' lcd ?
I suspect new LCD required by sounds of it. LCD can not be stripped for repair so after basic inspection of external connection replacement is only solution & not expensive due to falling cost of HD2 parts.
Im sick of this synaptics ts.
I would like to change it to atmel.
Do i need a toucscreen with digitizer?
You can get it on eBay.
You can either buy only the touchscreen (the plastic) or touchscreen with the frame (dark colored chrome effect). I personally have bought both, and can say it doesn't make a big difference. When you only buy the touchscreen, you have to remove the old touch screen from the frame (it's glued) & replace it with the new one (some glue should be added). I also bought one with the frame attached, but the glue was not good so I had to reattach it anyway.
When buying with the frame, make sure the speaker is "small". As far as I know all normal U8800 have the smaller speaker, but I can't be 100% sure on this.
To distinguish between Atmel and Synaptics, check the color of the ribbon cable. Atmel is golden on one side (it should also say Truly somewhere). Synaptics is black on both sides (it also tells TM-1564 on the cable). Some sellers allow you to select it, or you can ask for the specific one yourself.