How I can change the New button mode from my program?
I.e. I want the New button without combo (Contacts, Excel, Note, etc) on the right.
When my program is closed the button state should be restored to default.
Is it possible?
Thanks a lot.
i asume that all button asigning is inside the registry
so if you when you start your program do a backup of the registrys
you want to change and when your programs is closed your reasign the registrys that were there before
you may want to do some handling of the program being minimized aswell since CE programs dont really close when you close them but just minimize
Thanks a lot.
But is there an API way (or some other documented way) to do this?
Related
Is it possible to actually 'close' programs using the internet explorer hard button?
I have SPBPlus installed, and the 'x' button is set to actually close programs rather than minimize then. When i assign the (ok/close) behaviour to the internet explorer button, and then use it to close a program, it only minimizes it.
So basically, is it possible to make my internet explorer button actually close programs?
thanks.
Yes it is possible with SPB Plus installed. Look further down the list of options and choose [Close]
This should do the trick.
I use Wisbar Advance 2 for that. I also have a .cpl that you drop in your windows folder that will show up in Settings>System>Soft Key so you can use the soft keys as a close button. I have the left SK for Windows and the right SK for a Close button.
whats good said:
Is it possible to actually 'close' programs using the internet explorer hard button?
I have SPBPlus installed, and the 'x' button is set to actually close programs rather than minimize then. When i assign the (ok/close) behaviour to the internet explorer button, and then use it to close a program, it only minimizes it.
So basically, is it possible to make my internet explorer button actually close programs?
thanks.
Click to expand...
Click to collapse
Hello whats good,
Seems Like no one in the above posts interpreted what you meant.
I understand that U want to close your apps. with the HARDWARE BUTTON <INTERNET EXPLORER>
I assume (As u have stated above) U have set <ok/close> as the Action assigned to it.
Thats why It Minimises it.
To CLOSE IT FULLY. simply assign <CLOSE OK>
SCROLL DOWN >>>
Ok/CLOSE and CLOSE OK are Two Different Things.
That shall close it Proper.
PS::I too was using OK/CLOSE previously. Thanx to your Post I am able to Close my apps Fully.
One thing though It takes a mere 1.5 seconds to open my 2900 Contacts Book. But My device is lighter all the time with all the memory Hogging apps Down !!
One more thing I shall add (editing My Post)
Only those apps. whose page is Open shall be closed by this.
Not the background apps.
I know this doesn't answer your question, but you should install smartskey and use the right softkey button to close apps. Alternatively, the end call button seems to close most apps.
thanks for the replys, all helped, i've finally managed to actually close programs without having to always touch the little x in the top corner with my big clumsy thumb!
Im not really familiar with pocket windows but basically, can i create a shortcut to a specific folder. I know there are buttons linking to my documents, and on SPB plus you can have a link to my documents on your today screen, but can i choose a shortcut to a specific folder i have created, on my memory card, and put the shortcut on the today screen?
Thanks again again!
Post the .cpl file?
hellomoto_25 said:
I use Wisbar Advance 2 for that. I also have a .cpl that you drop in your windows folder that will show up in Settings>System>Soft Key so you can use the soft keys as a close button. I have the left SK for Windows and the right SK for a Close button.
Click to expand...
Click to collapse
Can you post this .cpl file? I want to try it. Thanks
whats good said:
can i choose a shortcut to a specific folder i have created, on my memory card, and put the shortcut on the today screen?
Thanks again again!
Click to expand...
Click to collapse
with the spb pocketplus plug-in, you can. click (and hold) on it and a dialog box will open, do the following:
choose Add/Remove Items...
choose Add (left softkey location)
choose Folder
select the folder that you want (you can press on the '+' sign at the storage card folder in order to choose sub-folders)
I use SPB Mobile Shell and I would like to make it so "SPB Menu" comes up when I press the Start button on the top left hand corner.
Is there a way to do this?
I dont think this is possible, but why would you want to do that, a pop up menu is great in my opinion.
I recommend you to assign the spb menu to one of your hardware keys, like the camera key or something like that,
cu
It is possible - for example QuickMenu can replace the start menu with itself. HTC EnlargeStart Menu does the same. Maybe it needs some kind of registry hack.
tomazez said:
I dont think this is possible, but why would you want to do that, a pop up menu is great in my opinion.
I recommend you to assign the spb menu to one of your hardware keys, like the camera key or something like that,
cu
Click to expand...
Click to collapse
I LOVE the SPB Menu and since I use my fingers 99% of the time on my Touch I don't really have a use for the built in Start menu.
I know there has to be a way to do this, I just hope it is a easy one.
I looked through my registry a bit but I didn't see anything that would change this.
It has to be possible.
Is there a way to do a registry dump, perform the HTC Start Menu Tweak and then perform another dump and somehow compare them to see what has changed?
With Wisbar Advance 3 you can map the start button to anything you want.
I installed Wisbar Advance Desktop to play around with when I first got my Touch. I uninstalled it because I didn't like the functionality. After the uninstall I still have Wisbar icons showing up in some of my menu's. There is no way I am going to install one of their bloated products just to do one simple function.
Hi, i am looking for the same Startbutton tweak.
I want to remove the Startbutton AND the word "Start" right to the button.
Wisbar Lite Taskmanager does remove the word "Start".
I'd like to know how this works, and somehow it must be possible to remove or reassign the Startbutton without installing WAD or WA3, a megapackage for only one function.
If someone has the skills to do this and/or write a simple program to make this happen I wouldn't mind compensating them. Either in $$ or Webhosting!
Nothing is being removed in most of these cases, the start button and or title bar is being covered up.
JudgeDredd67 said:
Nothing is being removed in most of these cases, the start button and or title bar is being covered up.
Click to expand...
Click to collapse
I don't want anything removed, I just want to change the link on the Start menu to point to something else.
bump it up!
I compared the registry with the large menu on and off and this is all I found. Not much help (for me anyway).
BIG START MENU
[HKEY_LOCAL_MACHINE\Software\HTC\EnlargeMenu]
"DropDown"=dword:00000000
"Enable"=dword:00000001
LITTLE START MENU
[HKEY_LOCAL_MACHINE\Software\HTC\EnlargeMenu]
"Enable"=dword:00000000
"DropDown"=dword:00000000
fowen said:
I don't want anything removed, I just want to change the link on the Start menu to point to something else.
Click to expand...
Click to collapse
He says that it's not a registry tweak... maybe those programs relocate the title bar and put themselves in that positions looking similar with different functions... That is the way that evb used to work fullscreen (relocating the title bar, sip and taskbar)...
I finally gave in and reinstalled Wisbar Advance. I would rather accomplish this without using Wisbar but for now it will work.
Hi,
Unfortunately I broke my touch screen. Most unfortunate thing is, my 'windows' and 'OK' button are remapped to work as right and left soft keys.
Now, I need to take backup of my SMS / mails. For this I want to open the 'programs'...
- Is there any way to open the 'Start' / 'Windows' menu by some other shortcut??
- Is it possible to 'open' the programs screen with some other shortcut?
- Is it possible to 'open' the file explorer with some other shortcut?
Thanks in advance
kumar00455 said:
Hi,
Unfortunately I broke my touch screen. Most unfortunate thing is, my 'windows' and 'OK' button are remapped to work as right and left soft keys.
Now, I need to take backup of my SMS / mails. For this I want to open the 'programs'...
- Is there any way to open the 'Start' / 'Windows' menu by some other shortcut??
- Is it possible to 'open' the programs screen with some other shortcut?
- Is it possible to 'open' the file explorer with some other shortcut?
Thanks in advance
Click to expand...
Click to collapse
try pocket controller
Install MyMobilier on you pc. I seem to recall it installing automatically with no user intervention. So this might work!
Thanks Anilkaparthi & afbcamaro...
Will defenitely try both
Tried 'Pocket Controler' and it worked like charm. Thanks
For some reasons MoMobiler site was blocked from @ my office network - so couldnt try from office. Will try it later
Must say i used to use mobiller and it made my BA run so slow, but if u cant use touch screen it is a fantastic program to use
I am looking for a solution for changing the programs in TF3D.
I tested already the Alt-tab.exe and the alt-tab in Aebuttons.
If you have 3 programs opened these alt-tab changes only to one or 2 programs.
I mapped the alt-tab to the back-sensor button (right button to "Home").
Does anybody knows a working solution?
Me too!
Furthermore, is there any way so set the taskmanager that comes with HD and is only useable in homescreen on a button, so that it works form any open window?
copy the TaskMgr.ink from windows to \windows\startmenu\Programs - It is not beautyful but it works. I´ve set it on long press phone button - bebause I need all buttons as they are
well the taskmgr.lnk contains the html-help to the taskmanager. if you start the taskmgr.cpl you have only a windoq of the running programs. not a finger-friendly solution.
Yes
I would prefer a solution as is already is on the HD on top of today screen. But I don´t find a way to get it to work on a button.
Hey try this one! I like it
EDIT: the link
http://soft.photoracer.net/docs/wktask_en.html
I do not use TF3D and have the WM6.1 standard softkeys of Calendar and Contacts.
I have done a search of the forum and found nothing so hoping somebody can help.
What is the least memory exhaustive program that allows you to change your soft keys? You used to be able to do it as standard on WM5 but it seems they have scrapped that for the newer OS.
Is there even a way of doing it without installing a program?
you cant change the softkeys on titanium
I'm not on titanium, just standard WM6.1
if you're talking about RAM memory, any program would be good since it's a registry tweak.
you could use diamond tweak, or TFDetacher(just running the TFDetacher config is enough, no need to use the actual detacher tool)
Changing softkeys
you need to create the keys
HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\112 - for left softkey
HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\113 - for right.
in each of them to create a 2 key
default [string] - name softkey
open [string] - the file path in quotes
for example: right softkey - AltTab:
default AltTab
open "\program files\AltTab\AltTab.exe"
...and soft reset
Well, I think you better learn how to search properly ;-) Forget about all these comments. Just use Softkey Manager. It solves your question without any manual registry edits. And, as mentioned, it doesn't use RAM as the program doesn't need to run constantly. It just changes what the softkey does, so there is no RAM affection. See thread here: http://forum.xda-developers.com/showthread.php?t=414405.