Related
Is it possible to actually 'close' programs using the internet explorer hard button?
I have SPBPlus installed, and the 'x' button is set to actually close programs rather than minimize then. When i assign the (ok/close) behaviour to the internet explorer button, and then use it to close a program, it only minimizes it.
So basically, is it possible to make my internet explorer button actually close programs?
thanks.
Yes it is possible with SPB Plus installed. Look further down the list of options and choose [Close]
This should do the trick.
I use Wisbar Advance 2 for that. I also have a .cpl that you drop in your windows folder that will show up in Settings>System>Soft Key so you can use the soft keys as a close button. I have the left SK for Windows and the right SK for a Close button.
whats good said:
Is it possible to actually 'close' programs using the internet explorer hard button?
I have SPBPlus installed, and the 'x' button is set to actually close programs rather than minimize then. When i assign the (ok/close) behaviour to the internet explorer button, and then use it to close a program, it only minimizes it.
So basically, is it possible to make my internet explorer button actually close programs?
thanks.
Click to expand...
Click to collapse
Hello whats good,
Seems Like no one in the above posts interpreted what you meant.
I understand that U want to close your apps. with the HARDWARE BUTTON <INTERNET EXPLORER>
I assume (As u have stated above) U have set <ok/close> as the Action assigned to it.
Thats why It Minimises it.
To CLOSE IT FULLY. simply assign <CLOSE OK>
SCROLL DOWN >>>
Ok/CLOSE and CLOSE OK are Two Different Things.
That shall close it Proper.
PS::I too was using OK/CLOSE previously. Thanx to your Post I am able to Close my apps Fully.
One thing though It takes a mere 1.5 seconds to open my 2900 Contacts Book. But My device is lighter all the time with all the memory Hogging apps Down !!
One more thing I shall add (editing My Post)
Only those apps. whose page is Open shall be closed by this.
Not the background apps.
I know this doesn't answer your question, but you should install smartskey and use the right softkey button to close apps. Alternatively, the end call button seems to close most apps.
thanks for the replys, all helped, i've finally managed to actually close programs without having to always touch the little x in the top corner with my big clumsy thumb!
Im not really familiar with pocket windows but basically, can i create a shortcut to a specific folder. I know there are buttons linking to my documents, and on SPB plus you can have a link to my documents on your today screen, but can i choose a shortcut to a specific folder i have created, on my memory card, and put the shortcut on the today screen?
Thanks again again!
Post the .cpl file?
hellomoto_25 said:
I use Wisbar Advance 2 for that. I also have a .cpl that you drop in your windows folder that will show up in Settings>System>Soft Key so you can use the soft keys as a close button. I have the left SK for Windows and the right SK for a Close button.
Click to expand...
Click to collapse
Can you post this .cpl file? I want to try it. Thanks
whats good said:
can i choose a shortcut to a specific folder i have created, on my memory card, and put the shortcut on the today screen?
Thanks again again!
Click to expand...
Click to collapse
with the spb pocketplus plug-in, you can. click (and hold) on it and a dialog box will open, do the following:
choose Add/Remove Items...
choose Add (left softkey location)
choose Folder
select the folder that you want (you can press on the '+' sign at the storage card folder in order to choose sub-folders)
Anyway the device lock be mapped to a soft key instead of a hard key? I have it mapped to the messaging button, but would rather have it at the calendar or contacts button.
Cingular 8125
ROM 1.8.11.1WWE
WM5
A little program called WM5NewMenu should do it. It's free, just put it into a google search.
calouro said:
A little program called WM5NewMenu should do it. It's free, just put it into a google search.
Click to expand...
Click to collapse
Thx, but all this did was to let me rename the word "calendar" to "device lock", with the actual calendar program still assigned to the left softkey.
Cingular 8125
ROM 1.8.11.1WWE
WIZA100
I'm trying to get some directions for the program, from doing a little research on google it looks like you can reassign the button with that program, just have to figure out how. I'll look for some direction on the program.
Ok, I figured it out.
Goto WM5newmenu, under "launch by:" select "Left Softkey" Then under "Soft Key Label:" enter your label (ie. "Lock")
Then goto the "items" tab. select "new" then select the little box next to "parameters:" select "windows" then ""go into" at the bottom.
Scroll over to "BSDeviceLock.exe" then hit "select"
Then enter "lock" or whatever you want under "item label:"
You will see the new entry on the left side of the screen, you may have to scroll down a little. You can uncheck all of the other items and just leave the new "Lock" item you created. After that select ok and do a soft reset.
After it resets, hit your left sofkey, you will see your newly created lock pop up. Then just hit the center button on the pad! It locks!! I just did this and it works!!
Hope this helps,
Just found this, it's even better then WM5newmenu:
Reassign left softkey on Today screen to open Notes application
Use Total Command to navigate to HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\11 2
Change the “Default” key to the name that you want to appear on the button (in my case Notes)
Change the “Open” value to the location of the program you want to open (in my case “Windows/Notes.exe” ( you would enter “Windows/BSdevicelock.exe”)
Perform a soft reset
Look in your windows folder to see if you have BSdevicelock.exe if you don't let me know and i'll get it to you.
calouro said:
Just found this, it's even better then WM5newmenu:
Reassign left softkey on Today screen to open Notes application
Use Total Command to navigate to HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\11 2
Change the ?Default? key to the name that you want to appear on the button (in my case Notes)
Change the ?Open? value to the location of the program you want to open (in my case ?Windows/Notes.exe? ( you would enter ?Windows/BSdevicelock.exe?)
Perform a soft reset
Look in your windows folder to see if you have BSdevicelock.exe if you don't let me know and i'll get it to you.
Click to expand...
Click to collapse
I did the registry edit, and when I tap the left soft key, I get "the file device lock cannot be opened due to an untrusted certificate, or one of its components is missing." I could NOT find BSdevicelock.exe in the Windows folder. Where in windows should this file be located?
I would like that BSdevicelock as well, if I could.
Its in the root windows folder, you probably don't have it.
I'll attach it as soon as I get home from work tonight!
Just copy it into your windows directory.
BSDevicelock
Just unzip this and place it in your windows folder with the registry change.
Hope this helps!
calouro said:
Just unzip this and place it in your windows folder with the registry change.
Hope this helps!
Click to expand...
Click to collapse
Got it good buddy! I kept the other items in WM5NewMenu and labeled the softkey "Menu", and changed BSdevicelock in the label box to Device Lock. Now all I do is hit the new softkey "Menu", scroll to device lock, hit the center button on the D pad. Device locks like you said it would! I was able to do this after extracting the BSdevicelock.zip to my Windows folder. Excellent instructions! Thx a MILL! If you discover anything else that's appealing, let me in on it..o.k.? Just found out I could move Device Lock to the top. Now I don't have to scroll down.
Cingular 8125
ROM 1.8.11.1WWE
ROM date: 2005
No problem, glad I could help!
hotdog53 said:
Got it good buddy! I kept the other items in WM5NewMenu and labeled the softkey "Menu", and changed BSdevicelock in the label box to Device Lock. Now all I do is hit the new softkey "Menu", scroll to device lock, hit the center button on the D pad. Device locks like you said it would! I was able to do this after extracting the BSdevicelock.zip to my Windows folder. Excellent instructions! Thx a MILL! If you discover anything else that's appealing, let me in on it..o.k.? Just found out I could move Device Lock to the top. Now I don't have to scroll down.
Cingular 8125
ROM 1.8.11.1WWE
ROM date: 2005
Click to expand...
Click to collapse
I use MortSaver (Phone Edition) which locks and blanks screen and relocks/blanks screen after calls/reminders etc..
guys you seem to me to be making this quite hard for yourselves
use this softkey app to change the softkeys (3rd post)
use this device lock app.
go to start/settings/system/softkey and select the device lock app
and soft reset, softkey changes generally don't occur until after
bbobeckyj said:
guys you seem to me to be making this quite hard for yourselves
use this softkey app to change the softkeys (3rd post)
use this device lock app.
go to start/settings/system/softkey and select the device lock app
and soft reset, softkey changes generally don't occur until after
Click to expand...
Click to collapse
None of your "this" links worked for me. Besides, I'm content now.
My old simple Nokia 6200 had a feature whereby the keypad was locked automatically without need for a PIN three minutes (selectable) after a call when there was no activity.
Is there any easy way to implement this ? I can map H/W keys (thanks to Molski) but this isn't quite the same.
calouro said:
Just unzip this and place it in your windows folder with the registry change.
Hope this helps!
Click to expand...
Click to collapse
Is BSdevicelock better than the lock app already on the device in the Windows folder??
The app im talking about is called devicelock.exe on my device. I have an HTC Wizard
I did not have devicelock.exe in my windows folder originally. BSdevicelock is just a little program that simply locks the device. I don't have devicelock.exe, but I imagine they probably do the same thing. I think BSdevicelock is actually installed by the BatteryStatus program. If you have a later version of Battery Status, you should have BSdevicelock.
I'm using Atom Pure /w WM6 0.7.2 01172008C1WWE 6MBPP
+ HTC Home Plugin
I have silly questions:
how to re-assign 2 shortcut on the (bottom) command bar on the first page?
T.q.
Oery said:
I'm using Atom Pure /w WM6 0.7.2 01172008C1WWE 6MBPP
+ HTC Home Plugin
I have silly questions:
how to re-assign 2 shortcut on the (bottom) command bar on the first page?
T.q.
Click to expand...
Click to collapse
can you explain further what you wanted to create shortcuts mate? is it the soft button(left and right) at the bottom. If so, just use the built in soft key customizer in the ROM.
hi brian
i use the key customizer, but when i change it, it's say "error opening the shortcut or locating the target filename"
what should i do ?
thank you
PiaL said:
hi brian
i use the key customizer, but when i change it, it's say "error opening the shortcut or locating the target filename"
what should i do ?
thank you
Click to expand...
Click to collapse
do it this way, lets say you have installed htc action screen and wanted to create a short cut on the left soft key.
open soft key customizer, then select customize.
label anything like NEW or HTCA or anything that you want. (In my case I use new) click ok
Then select the correct path with the .EXE e.g. /windows/HTCActionScreen.exe (I believe it should be written precisely if it's upper case or lower case so correct me if im wrong hehehe)
You are almost done! just select anything you want on the right softkey.
Yes on soft reset, presto! a new short cut on the left softkey!
Hope this helps
ow, i see how it works now, thanks brian
oh, i forgot to mention that calendar, contacts, messaging (in the option) don't work, if i select it then tap the key, it say "error opening the shortcut or locating the target filename"
how can i fix this ?
is there anyway to deactivated the softkey customizer ?
i mean to change back to the default setting
thank you
PiaL said:
ow, i see how it works now, thanks brian
oh, i forgot to mention that calendar, contacts, messaging (in the option) don't work, if i select it then tap the key, it say "error opening the shortcut or locating the target filename"
how can i fix this ?
is there anyway to deactivated the softkey customizer ?
i mean to change back to the default setting
thank you
Click to expand...
Click to collapse
all the options worked for me. calendar/contacts et al. I personally use it to assign htc action screen on left soft key.
If you want the default ones, just run soft key customizer again then select what was the default key before then soft reset.
that's the problem, the calendar, contacts and messaging didn't work, so I can't select one of them for the right side softkey
Oh well, this is my first problem with this ROM, overall I like this ROM
Thank you
Only works for exe (shortcut ".lnk" won't work)
Code:
1. HKLM\Software\SonyEricsson\PanelManager\ApplicationName
2. e.g. Change it to "\..\Windows\Pie.exe"
thats just linking to another application. but its not released for windows mobile use.
jackleung said:
Only works for exe (shortcut ".lnk" won't work)
1. HKLM\Software\SonyEricsson\PanelManager\ApplicationName
2. e.g. Change it to "\..\Windows\Pie.exe"
Click to expand...
Click to collapse
NICE find ! Thx alot !!!!!
It works flawlessly with Quickmenu !
So.. I got my Startmenu-Button back !
Btw: I also installed the Blackstone FM Radio Cab so no functionality is gone from my X1. The Mediapanel is nice but.... Who cares...?
DocMAX said:
thats just linking to another application. but its not released for windows mobile use.
Click to expand...
Click to collapse
???
Of course it is a registry tweak and not an application ?
What am i doing wrong?
i changed the reg key to: \Windows\CommManager.exe
but it still tells me that there is no panel manager instead of opening the communication manager.
anheuer said:
What am i doing wrong?
i changed the reg key to: \Windows\CommManager.exe
but it still tells me that there is no panel manager instead of opening the communication manager.
Click to expand...
Click to collapse
I made this mistake as well, it's because you've missed the most important part.
1. HKLM\Software\SonyEricsson\PanelManager\ApplicationName
2. e.g. Change it to "\..\Windows\Pie.exe"
"\..\"
You must put that at the start. I did my comm manager and has to do:
"\..\Windows\CommManagerLink.exe"
Thanks for finding this to the OP as well, been looking to get this changed for a while!
i installed one of the roms that do not have panel manager installed. this trick doesnt seem to work on the rom
im confused
cansomeone pls explain what u can achieve by changing this buttoins function other than losing acces to the panel function :S or does this simply mean u can save cpu usage
pls reply with some insight
thnx
Uh... but if you assign your panel button to something else.... then how you gonna access the panels still?
This is incase you dont use the panels.
Like me... i have had the original rom, and 2 roms here on this forum (custom)
And with every rom i had the same thing.
Having tf3d and panels will crash my phone (when i use e.g. google panel and then hit the x for panel change, then i often need to remove battery and place it again)
i rather have the tf3d then panels if i have to choose.
so thats why i use the X for a different app.
AE Button Plus
Or you could use 'AE Button Plus' it works for me flawlessly. I can assign the Panel Button to just about anything I choose.
how did you asign something to the AE button?
how do i reassign another button to run panel manager? I tried to execute /Program Files/Panel Manager/PanelManager.exe but that does not bring up the panel manager
anheuer said:
how did you asign something to the AE button?
Click to expand...
Click to collapse
In AE Button Plus main screen, select FILE menu and choose ADD BUTTON and the dialog box that pops up is waiting for you to press a hardware button...
Press the X-PANEL button (which will probably launch panel manager if it's installed, no matter close that down) it will then allow you to press in the dialog box 'ADD KEY' and also shows you the Key code...
The key code will be next to the newly created button in the list for you to assign to whateve you like.
fotoingo said:
NICE find ! Thx alot !!!!!
It works flawlessly with Quickmenu !
So.. I got my Startmenu-Button back !
Click to expand...
Click to collapse
how did you do this? i want panel button remapped to start menu but i cant seem to figure it out there is no startmenu.exe in windows file??? what is the file called?
thanks
he uses QuickMenu 2.7 as a replacement start menu.
patterns said:
how did you do this? i want panel button remapped to start menu but i cant seem to figure it out there is no startmenu.exe in windows file??? what is the file called?
thanks
Click to expand...
Click to collapse
Yeah, assign Quickmenu.exe to the panel button and you get a "startmenu" button. Search for Quickmenu 2.7 around the forum....
doesnt work
I followed your directions and can't get the x-panel button to run quickmenu. It still runs the panel manager. There's something else that needs to be done, and I haven't' a clue what that is.
At least I was able to load the cab file that makes panels work on the touch HD. So when I eventually get the x-panel button reassigned, I can still access panels (which I infrequently do as it is). I have yet to see the value of panels. I like running things in the background concurrently, i.e. listening to streaming radio or mp3, txt'ing, using GPS, or exploring on the web. Panel switching seems to halt other tasks.
Kinda works
Finally got quickmenu to work with the x-panel key. Another important tidbit of info is that quickmenu must already be running for the x-button to invoke it. Otherwise it loads panelmanager.
Another bit of info, as soon as you run panel for the first time (in programs, the touch HD cab adds it on install), the behavior reverts back to the x-panel key invoking panelmanager and not quickmenu. I checked, quickmenu is still running. Figure that one out. Very confusing.
i installed panel as a seperate cab, i dont have the panel manager in my programs and i cant seem to invoke it any other way besides pressing the hardware button
apprentice said:
Or you could use 'AE Button Plus' it works for me flawlessly. I can assign the Panel Button to just about anything I choose.
Click to expand...
Click to collapse
I heard AEbutton plus cannot grab the OK button. Is this true?
Hi.
I was curious if anyone knows a way to re-map the internet browser shortcut key that is on the bottom right of the Sprint HTC Snap. I would like to have it open Skyfire instead of IE. Skyfire is set as my default browser but the button still opens IE. Also, do the same thing with the Mycircle key but change it to open Task Manager.
Thanks.
The file is in \Windows and it's called short_circle.lnk. Just make a new .lnk and call it short_circle.lnk and copy it to \Windows overwriting the old one.
Hi I got the Inner Circle key remapped using both short_circle.lnk and long_circle.lnk.
I am still having trouble getting the internet key to remap to Skyfire. I have tried making PIE.lnk, short_IE.lnk, long_IE.lnk, short_PIE.lnk, long_PIE.lnk. None of these seems to do the trick. Any ideas?
webworker01 said:
Hi I got the Inner Circle key remapped using both short_circle.lnk and long_circle.lnk.
I am still having trouble getting the internet key to remap to Skyfire. I have tried making PIE.lnk, short_IE.lnk, long_IE.lnk, short_PIE.lnk, long_PIE.lnk. None of these seems to do the trick. Any ideas?
Click to expand...
Click to collapse
That key may be hardware coded into the keyboard driver. Not sure.
Hello,
i have an German Model of the Snap.
And i don´t Use Inner Circle. So the TaskManager will be the best Applikation on this Button.
But it don´t work.
I Edit the Files
- InnerCircle.lnk
- Short_Circle.lnk
and Change ist to the TaskMgr.exe.
I Restart my Phone, but the Button always Call the InnerCircle Funktion.
What is my mistake?
Greatings
Christian
c.radi said:
Hello,
i have an German Model of the Snap.
And i don´t Use Inner Circle. So the TaskManager will be the best Applikation on this Button.
But it don´t work.
I Edit the Files
- InnerCircle.lnk
- Short_Circle.lnk
and Change ist to the TaskMgr.exe.
I Restart my Phone, but the Button always Call the InnerCircle Funktion.
What is my mistake?
Greatings
Christian
Click to expand...
Click to collapse
Christian, instead of editing the Short_circle.lnk file directly, try as follows:
1. Copy the TaskManager.lnk file from your Windows/Start Menu to another folder (i.e /Storage Card)
2. go in /Storage Card and rename TaskManager.lnk as Short_Circle.lnk
3. Copy this file into /Windows
This should work..at least it did for myself.
Regards
Hello,
thanks for your reply, but it doesn´t works.
The InnerCircle Key always start the Inner Circle Applikation.
Greetings
Christian
1) use total commander or the likes,
2) change the read-only attribute on the short_circle.lnk.
3) then replace the shortcut with whatever application you'd like to run and save it as short_circle.lnk.
Thanks! This worked for me.
ookba said:
That key may be hardware coded into the keyboard driver. Not sure.
Click to expand...
Click to collapse
Hi there,
Do you have more info on that ? I have a S521 (Frenchy ass, fruity ass), and the so-called internet key is for Live Mess-enger. I would be really interested in mapping a different function to that key.
Hi,
is it possible to re-mapping also key dedicated for Live Messenger? I try it in the same way, like for Inner Circle (which work correctly), but without effect.
I know this reply is late, but for anyone still playing around with HTC SNAPs:
lojza_ said:
Hi,
is it possible to re-mapping also key dedicated for Live Messenger? I try it in the same way, like for Inner Circle (which work correctly), but without effect.
Click to expand...
Click to collapse
Yep I managed this one:
do the same for \Windows\Start Menu\Messaging.lnk
I Used Total Commander, edited Short_Circle.lnk to be non read only
Found the shortcut i wanted to use, edited the file and copied the shortcut link (do a select all), then edit Short_Circle.lnk, remove the old shortcut path and select all and then paste. Enjoy your Custom single Button shortcut key
I have Telstra Branded Snaps, and i had to remove the security off the phones before i could untick the read only attribute on the Short_Circle.lnk shortcut.
To remove the security:
Install "Clear Security.cab"
Install and Launch Microsoft’s Security Configuration Manager on your PC
Select Security Off from the drop down menu and click the Provision button, the program will install a file called Tool.cab on the mobile device.
MS Security Configuration Manager available here:
http://www.microsoft.com/downloads/...8c-d587-47e0-908b-09fee6ea517a&displaylang=en