Is it possible to actually 'close' programs using the internet explorer hard button?
I have SPBPlus installed, and the 'x' button is set to actually close programs rather than minimize then. When i assign the (ok/close) behaviour to the internet explorer button, and then use it to close a program, it only minimizes it.
So basically, is it possible to make my internet explorer button actually close programs?
thanks.
Yes it is possible with SPB Plus installed. Look further down the list of options and choose [Close]
This should do the trick.
I use Wisbar Advance 2 for that. I also have a .cpl that you drop in your windows folder that will show up in Settings>System>Soft Key so you can use the soft keys as a close button. I have the left SK for Windows and the right SK for a Close button.
whats good said:
Is it possible to actually 'close' programs using the internet explorer hard button?
I have SPBPlus installed, and the 'x' button is set to actually close programs rather than minimize then. When i assign the (ok/close) behaviour to the internet explorer button, and then use it to close a program, it only minimizes it.
So basically, is it possible to make my internet explorer button actually close programs?
thanks.
Click to expand...
Click to collapse
Hello whats good,
Seems Like no one in the above posts interpreted what you meant.
I understand that U want to close your apps. with the HARDWARE BUTTON <INTERNET EXPLORER>
I assume (As u have stated above) U have set <ok/close> as the Action assigned to it.
Thats why It Minimises it.
To CLOSE IT FULLY. simply assign <CLOSE OK>
SCROLL DOWN >>>
Ok/CLOSE and CLOSE OK are Two Different Things.
That shall close it Proper.
PS::I too was using OK/CLOSE previously. Thanx to your Post I am able to Close my apps Fully.
One thing though It takes a mere 1.5 seconds to open my 2900 Contacts Book. But My device is lighter all the time with all the memory Hogging apps Down !!
One more thing I shall add (editing My Post)
Only those apps. whose page is Open shall be closed by this.
Not the background apps.
I know this doesn't answer your question, but you should install smartskey and use the right softkey button to close apps. Alternatively, the end call button seems to close most apps.
thanks for the replys, all helped, i've finally managed to actually close programs without having to always touch the little x in the top corner with my big clumsy thumb!
Im not really familiar with pocket windows but basically, can i create a shortcut to a specific folder. I know there are buttons linking to my documents, and on SPB plus you can have a link to my documents on your today screen, but can i choose a shortcut to a specific folder i have created, on my memory card, and put the shortcut on the today screen?
Thanks again again!
Post the .cpl file?
hellomoto_25 said:
I use Wisbar Advance 2 for that. I also have a .cpl that you drop in your windows folder that will show up in Settings>System>Soft Key so you can use the soft keys as a close button. I have the left SK for Windows and the right SK for a Close button.
Click to expand...
Click to collapse
Can you post this .cpl file? I want to try it. Thanks
whats good said:
can i choose a shortcut to a specific folder i have created, on my memory card, and put the shortcut on the today screen?
Thanks again again!
Click to expand...
Click to collapse
with the spb pocketplus plug-in, you can. click (and hold) on it and a dialog box will open, do the following:
choose Add/Remove Items...
choose Add (left softkey location)
choose Folder
select the folder that you want (you can press on the '+' sign at the storage card folder in order to choose sub-folders)
Related
I am using the smartkey program to hold the softkeys to enter startscreen.
Now I am looking for an option or a program to copy/paste and to put it under the message button.
Or does anybody knows a program that only gives the option to cut/copy/paste.
With this my phone would be perfectly tunned.
aage said:
I am using the smartkey program to hold the softkeys to enter startscreen.
Now I am looking for an option or a program to copy/paste and to put it under the message button.
Or does anybody knows a program that only gives the option to cut/copy/paste.
With this my phone would be perfectly tunned.
Click to expand...
Click to collapse
If the context menu of the program contains copy and paste, you can hold the center key of the 5-ways navigator to popup the context menu.
water
Hi Water,
Thanks, but not all programs have that option. That's why I like to have a program like that.
Right now i'm using Magicbutton but that doesn't have that function. GSMagic had it but I like Magicbutton better. So now I need the copy/past function.
You can try Xbar which is under the D-Pad. It opens up a screen in which you can select the running task but also shortcuts to programs of your liking and there are shortcuts ready for copy and paste and cut.
Wouter
You can use PQz to map a hardware key (I use the Windows-key) to CTRL, so that you can use ctrl-c, ctrl-v etc.
http://forum.xda-developers.com/viewtopic.php?t=33343&highlight=ctrl
I think... just speculating here.. that they are more looking for...
press button - it copies whatever is the active selection
press button again - it pastes whatever is on the clipboard
Not sure, though... ctrl+c / ctrl+v works with the SIP, with that tool it works with the hardware keyboard, and if you're working with the sip - and thus a stylus - you can often just tap-and-hold and choose copy from the context menu.
PHM Keys comes with cut copy paste.
Use a button mapper to do as ZeBoxx says, if it's what you need, and you'll have quick access to said functions.
V
Thanks,
I'm using PQZ now. With TAB as CTRL. WIN would not work together with smartkey, because hold button 1 is the same hex number as WIN.
But this program is realy good.
My Solution to this...
I have a slightly hacked up copy of PHM Keys (couldn't get it to install on my 8125, so I hacked it off of a WM2003 device) that I'm using to solve this problem.
In my Start Menu I have three icons - "Object Copy", "Object Cut", and "Object Paste" (PHM Keys) so whenever I have something highlighted I click my (smartskey modified) Start Menu soft button, scroll down a slot or three with the 5-way, and select the copy/cut/paste operation I need.
When the KB is open it's even quicker Start-o Start-b Start-j respectively. Another plus is this works in nearly EVERY situation where you can highlight something. Sometimes the other options (context menus, SIP kbds, etc.) don't work everywhere.
Now some may not want to waste three Start Menu slots, but I have Tray launch filled with my apps, still have 4 Start Menu slots available, and all my non-soft buttons are mapped to one app or another, so I'm cool with them.
Plus I have my SIP pop-up KB completely disabled (I hate it's "intrusiveness" and only use the HW KB in landscape mode) so in portrait mode I had *NO* way to copy/cut/paste and had to devise something.
Good Luck
-JMS
I've updated VJKeyPress to add -cut, -copy, -paste.
On my website.
V
Help!
Is it possible to map the Startmenu programs window to the left softkey?
I'd like to access the programs window by one key press.
To put it anotherway, can somebody tell me what shortcut can opens the programs window or the settings window?
Pressing ok on the today screen will open up the startmenu .. in case you didnt knew .. otherwise .. the bottom window key can do the same ..
gravejoker said:
Pressing ok on the today screen will open up the startmenu .. in case you didnt knew .. otherwise .. the bottom window key can do the same ..
Click to expand...
Click to collapse
I knew that. I was talking about one-button-press access to the Programs window, and not to the Startmenu.
So I'd like to open the programs window by pushing the left soft key.
Then use WM5NewMenu to create a new menu containing all your programs .. then use the left softkey to launch that new menu ..
gravejoker said:
Then use WM5NewMenu to create a new menu containing all your programs .. then use the left softkey to launch that new menu ..
Click to expand...
Click to collapse
Thanks, but it'd be too much. I use almost all of the programs. I've sorted them into sub folters, it looks like almost a "normal" phone menu system.
And that's why I'd like to access them by one key...
Anybody? else?
enabe said:
Thanks, but it'd be too much. I use almost all of the programs. I've sorted them into sub folters, it looks like almost a "normal" phone menu system.
And that's why I'd like to access them by one key...
Anybody? else?
Click to expand...
Click to collapse
Use Resco Explorer and browse to windows-start menu and highlight the programs folder, tap menu and choose 'create shortcut in start menu' then after closing down Resco go to settings and choose 'soft key' in there, choose program. works for me! Also if when using Resco you goto menu and choose large icons in the 'view' sub menu, the layout will look very similar to the view when opening up programs the original way. Hope this helps!
padlad said:
Use Resco Explorer and browse to windows-start menu and highlight the programs folder, tap menu and choose 'create shortcut in start menu' then after closing down Resco go to settings and choose 'soft key' in there, choose program. works for me! Also if when using Resco you goto menu and choose large icons in the 'view' sub menu, the layout will look very similar to the view when opening up programs the original way. Hope this helps!
Click to expand...
Click to collapse
Thanks! You are beating about the bush!
It's almost that I wanted, but it runs the Resco Explorer, and the Resco is showing the programs folder.
The result is not bad, but starting the Resco takes more time, and more memory than the "normal" programs window
Somewhere I saw some *.cpl file (or what), in a shortcut that opened the settings window. I thought there is a similar solution to the programs folder too. So i'd like to know what should contains my .lnk file, that runs the normal programs window.
Any solution for this???
Thanks
enabe said:
Help!
Is it possible to map the Startmenu programs window to the left softkey?
I'd like to access the programs window by one key press.
To put it anotherway, can somebody tell me what shortcut can opens the programs window or the settings window?
Click to expand...
Click to collapse
I also want to know how to map the "Programs" to the softkey!! And it seem no one know the answer!! and the path to show the "Programs" in icon is not just a simple .lnk
Is there a solution to map the OK button to an app which closes programs?
AE Button Plus does not allow to map the OK button.
It does, you select 'File' then 'Add button'. Press the OK button and then 'Add key' and it will be added to the list where you can assign it to an action.
varden said:
Is there a solution to map the OK button to an app which closes programs?
AE Button Plus does not allow to map the OK button.
Click to expand...
Click to collapse
PQzII will fulfill your need
blcc said:
PQzII will fulfill your need
Click to expand...
Click to collapse
I cant find any manual for pqzii where i can learn to use it..as when i run the program it does nothing nothing...and even doesnt came with any manual...
any help on that??
daedalia said:
It does, you select 'File' then 'Add button'. Press the OK button and then 'Add key' and it will be added to the list where you can assign it to an action.
Click to expand...
Click to collapse
OK.
But which one is correct: #4075 or #405C?
Sometimes I get the first one sometimes second.
sajib said:
I cant find any manual for pqzii where i can learn to use it..as when i run the program it does nothing nothing...and even doesnt came with any manual...
any help on that??
Click to expand...
Click to collapse
I beleive pqzii is a good program to map the keys, but unless someone posts a manual as to how to use it, this program will render useless to newbies. Of course, those who are very knowledgable in programming will be the only ones benefiting from the hard work of the writer of this program.
Bottom line, how to use this program? Can someone who knows how to use it be kind enough to give us, newbies, some help?
Personally, I am using the X button program and it is great. I like to map the bottom OK button to become the X button to close programs from running in the background.
Thanks in advance to those who are willing to help.
My experience is :
1. Go to the install folder of PQzII with file explorer (picture 1)
2. Choose PQzII setup.exe (picture 2)
3. Tick the "Use OK button(Task Close/All)" checkbox under Windows option (picture 3)
4. Untick the " Use this function" checkbox under Icon option (picture 4)
5. Create a shortcut to Windows/Startup folder (picture 5)
HI blcc:
Thanks for the above. But the OK buttin still does not close the program - as I click it, it seems to have closed it but I looked at the Memory to find out the programs running - the one tat supposed to have been closed is still there.
BTW - One more newbie question about step 5 - how do your create a short cut to the Windos\StartUp?
Thanks again.
paulclo said:
HI blcc:
Thanks for the above. But the OK buttin still does not close the program - as I click it, it seems to have closed it but I looked at the Memory to find out the programs running - the one tat supposed to have been closed is still there.
BTW - One more newbie question about step 5 - how do your create a short cut to the Windos\StartUp?
Thanks again.
Click to expand...
Click to collapse
I can really close the program with OK button after apply the setting. For creating a shortcut, I use resco file explorer, tap and hold at the item and a pop up menu will appear. Choose "cut", and go to the statup folder, tap and hold again and choose "paste shortcut". That is.
Hope you understand my poor English.
blcc said:
I can really close the program with OK button after apply the setting. For creating a shortcut, I use resco file explorer, tap and hold at the item and a pop up menu will appear. Choose "cut", and go to the statup folder, tap and hold again and choose "paste shortcut". That is.
Hope you understand my poor English.
Click to expand...
Click to collapse
Hi Blcc:
Your English is very good and it makes mine pale.
Thank you once agin, my OK button now closes running program and there is nothing is the background.
I hope others who are hoping to utilize these two programs will happen to read this thread.
Thanks a million.
varden said:
OK.
But which one is correct: #4075 or #405C?
Sometimes I get the first one sometimes second.
Click to expand...
Click to collapse
4075 is what mine is set to.
PQzII was a bit buggy for me.
is there a way to have exceptions to closing the programs?eg:i like messaging and contacts to always be running in the background so if i press the ok hardware button it only minimizes messaging and contacts while really closing the other applications.
Anyway the device lock be mapped to a soft key instead of a hard key? I have it mapped to the messaging button, but would rather have it at the calendar or contacts button.
Cingular 8125
ROM 1.8.11.1WWE
WM5
A little program called WM5NewMenu should do it. It's free, just put it into a google search.
calouro said:
A little program called WM5NewMenu should do it. It's free, just put it into a google search.
Click to expand...
Click to collapse
Thx, but all this did was to let me rename the word "calendar" to "device lock", with the actual calendar program still assigned to the left softkey.
Cingular 8125
ROM 1.8.11.1WWE
WIZA100
I'm trying to get some directions for the program, from doing a little research on google it looks like you can reassign the button with that program, just have to figure out how. I'll look for some direction on the program.
Ok, I figured it out.
Goto WM5newmenu, under "launch by:" select "Left Softkey" Then under "Soft Key Label:" enter your label (ie. "Lock")
Then goto the "items" tab. select "new" then select the little box next to "parameters:" select "windows" then ""go into" at the bottom.
Scroll over to "BSDeviceLock.exe" then hit "select"
Then enter "lock" or whatever you want under "item label:"
You will see the new entry on the left side of the screen, you may have to scroll down a little. You can uncheck all of the other items and just leave the new "Lock" item you created. After that select ok and do a soft reset.
After it resets, hit your left sofkey, you will see your newly created lock pop up. Then just hit the center button on the pad! It locks!! I just did this and it works!!
Hope this helps,
Just found this, it's even better then WM5newmenu:
Reassign left softkey on Today screen to open Notes application
Use Total Command to navigate to HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\11 2
Change the “Default” key to the name that you want to appear on the button (in my case Notes)
Change the “Open” value to the location of the program you want to open (in my case “Windows/Notes.exe” ( you would enter “Windows/BSdevicelock.exe”)
Perform a soft reset
Look in your windows folder to see if you have BSdevicelock.exe if you don't let me know and i'll get it to you.
calouro said:
Just found this, it's even better then WM5newmenu:
Reassign left softkey on Today screen to open Notes application
Use Total Command to navigate to HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\11 2
Change the ?Default? key to the name that you want to appear on the button (in my case Notes)
Change the ?Open? value to the location of the program you want to open (in my case ?Windows/Notes.exe? ( you would enter ?Windows/BSdevicelock.exe?)
Perform a soft reset
Look in your windows folder to see if you have BSdevicelock.exe if you don't let me know and i'll get it to you.
Click to expand...
Click to collapse
I did the registry edit, and when I tap the left soft key, I get "the file device lock cannot be opened due to an untrusted certificate, or one of its components is missing." I could NOT find BSdevicelock.exe in the Windows folder. Where in windows should this file be located?
I would like that BSdevicelock as well, if I could.
Its in the root windows folder, you probably don't have it.
I'll attach it as soon as I get home from work tonight!
Just copy it into your windows directory.
BSDevicelock
Just unzip this and place it in your windows folder with the registry change.
Hope this helps!
calouro said:
Just unzip this and place it in your windows folder with the registry change.
Hope this helps!
Click to expand...
Click to collapse
Got it good buddy! I kept the other items in WM5NewMenu and labeled the softkey "Menu", and changed BSdevicelock in the label box to Device Lock. Now all I do is hit the new softkey "Menu", scroll to device lock, hit the center button on the D pad. Device locks like you said it would! I was able to do this after extracting the BSdevicelock.zip to my Windows folder. Excellent instructions! Thx a MILL! If you discover anything else that's appealing, let me in on it..o.k.? Just found out I could move Device Lock to the top. Now I don't have to scroll down.
Cingular 8125
ROM 1.8.11.1WWE
ROM date: 2005
No problem, glad I could help!
hotdog53 said:
Got it good buddy! I kept the other items in WM5NewMenu and labeled the softkey "Menu", and changed BSdevicelock in the label box to Device Lock. Now all I do is hit the new softkey "Menu", scroll to device lock, hit the center button on the D pad. Device locks like you said it would! I was able to do this after extracting the BSdevicelock.zip to my Windows folder. Excellent instructions! Thx a MILL! If you discover anything else that's appealing, let me in on it..o.k.? Just found out I could move Device Lock to the top. Now I don't have to scroll down.
Cingular 8125
ROM 1.8.11.1WWE
ROM date: 2005
Click to expand...
Click to collapse
I use MortSaver (Phone Edition) which locks and blanks screen and relocks/blanks screen after calls/reminders etc..
guys you seem to me to be making this quite hard for yourselves
use this softkey app to change the softkeys (3rd post)
use this device lock app.
go to start/settings/system/softkey and select the device lock app
and soft reset, softkey changes generally don't occur until after
bbobeckyj said:
guys you seem to me to be making this quite hard for yourselves
use this softkey app to change the softkeys (3rd post)
use this device lock app.
go to start/settings/system/softkey and select the device lock app
and soft reset, softkey changes generally don't occur until after
Click to expand...
Click to collapse
None of your "this" links worked for me. Besides, I'm content now.
My old simple Nokia 6200 had a feature whereby the keypad was locked automatically without need for a PIN three minutes (selectable) after a call when there was no activity.
Is there any easy way to implement this ? I can map H/W keys (thanks to Molski) but this isn't quite the same.
calouro said:
Just unzip this and place it in your windows folder with the registry change.
Hope this helps!
Click to expand...
Click to collapse
Is BSdevicelock better than the lock app already on the device in the Windows folder??
The app im talking about is called devicelock.exe on my device. I have an HTC Wizard
I did not have devicelock.exe in my windows folder originally. BSdevicelock is just a little program that simply locks the device. I don't have devicelock.exe, but I imagine they probably do the same thing. I think BSdevicelock is actually installed by the BatteryStatus program. If you have a later version of Battery Status, you should have BSdevicelock.
Only works for exe (shortcut ".lnk" won't work)
Code:
1. HKLM\Software\SonyEricsson\PanelManager\ApplicationName
2. e.g. Change it to "\..\Windows\Pie.exe"
thats just linking to another application. but its not released for windows mobile use.
jackleung said:
Only works for exe (shortcut ".lnk" won't work)
1. HKLM\Software\SonyEricsson\PanelManager\ApplicationName
2. e.g. Change it to "\..\Windows\Pie.exe"
Click to expand...
Click to collapse
NICE find ! Thx alot !!!!!
It works flawlessly with Quickmenu !
So.. I got my Startmenu-Button back !
Btw: I also installed the Blackstone FM Radio Cab so no functionality is gone from my X1. The Mediapanel is nice but.... Who cares...?
DocMAX said:
thats just linking to another application. but its not released for windows mobile use.
Click to expand...
Click to collapse
???
Of course it is a registry tweak and not an application ?
What am i doing wrong?
i changed the reg key to: \Windows\CommManager.exe
but it still tells me that there is no panel manager instead of opening the communication manager.
anheuer said:
What am i doing wrong?
i changed the reg key to: \Windows\CommManager.exe
but it still tells me that there is no panel manager instead of opening the communication manager.
Click to expand...
Click to collapse
I made this mistake as well, it's because you've missed the most important part.
1. HKLM\Software\SonyEricsson\PanelManager\ApplicationName
2. e.g. Change it to "\..\Windows\Pie.exe"
"\..\"
You must put that at the start. I did my comm manager and has to do:
"\..\Windows\CommManagerLink.exe"
Thanks for finding this to the OP as well, been looking to get this changed for a while!
i installed one of the roms that do not have panel manager installed. this trick doesnt seem to work on the rom
im confused
cansomeone pls explain what u can achieve by changing this buttoins function other than losing acces to the panel function :S or does this simply mean u can save cpu usage
pls reply with some insight
thnx
Uh... but if you assign your panel button to something else.... then how you gonna access the panels still?
This is incase you dont use the panels.
Like me... i have had the original rom, and 2 roms here on this forum (custom)
And with every rom i had the same thing.
Having tf3d and panels will crash my phone (when i use e.g. google panel and then hit the x for panel change, then i often need to remove battery and place it again)
i rather have the tf3d then panels if i have to choose.
so thats why i use the X for a different app.
AE Button Plus
Or you could use 'AE Button Plus' it works for me flawlessly. I can assign the Panel Button to just about anything I choose.
how did you asign something to the AE button?
how do i reassign another button to run panel manager? I tried to execute /Program Files/Panel Manager/PanelManager.exe but that does not bring up the panel manager
anheuer said:
how did you asign something to the AE button?
Click to expand...
Click to collapse
In AE Button Plus main screen, select FILE menu and choose ADD BUTTON and the dialog box that pops up is waiting for you to press a hardware button...
Press the X-PANEL button (which will probably launch panel manager if it's installed, no matter close that down) it will then allow you to press in the dialog box 'ADD KEY' and also shows you the Key code...
The key code will be next to the newly created button in the list for you to assign to whateve you like.
fotoingo said:
NICE find ! Thx alot !!!!!
It works flawlessly with Quickmenu !
So.. I got my Startmenu-Button back !
Click to expand...
Click to collapse
how did you do this? i want panel button remapped to start menu but i cant seem to figure it out there is no startmenu.exe in windows file??? what is the file called?
thanks
he uses QuickMenu 2.7 as a replacement start menu.
patterns said:
how did you do this? i want panel button remapped to start menu but i cant seem to figure it out there is no startmenu.exe in windows file??? what is the file called?
thanks
Click to expand...
Click to collapse
Yeah, assign Quickmenu.exe to the panel button and you get a "startmenu" button. Search for Quickmenu 2.7 around the forum....
doesnt work
I followed your directions and can't get the x-panel button to run quickmenu. It still runs the panel manager. There's something else that needs to be done, and I haven't' a clue what that is.
At least I was able to load the cab file that makes panels work on the touch HD. So when I eventually get the x-panel button reassigned, I can still access panels (which I infrequently do as it is). I have yet to see the value of panels. I like running things in the background concurrently, i.e. listening to streaming radio or mp3, txt'ing, using GPS, or exploring on the web. Panel switching seems to halt other tasks.
Kinda works
Finally got quickmenu to work with the x-panel key. Another important tidbit of info is that quickmenu must already be running for the x-button to invoke it. Otherwise it loads panelmanager.
Another bit of info, as soon as you run panel for the first time (in programs, the touch HD cab adds it on install), the behavior reverts back to the x-panel key invoking panelmanager and not quickmenu. I checked, quickmenu is still running. Figure that one out. Very confusing.
i installed panel as a seperate cab, i dont have the panel manager in my programs and i cant seem to invoke it any other way besides pressing the hardware button
apprentice said:
Or you could use 'AE Button Plus' it works for me flawlessly. I can assign the Panel Button to just about anything I choose.
Click to expand...
Click to collapse
I heard AEbutton plus cannot grab the OK button. Is this true?