Anyway the device lock be mapped to a soft key instead of a hard key? I have it mapped to the messaging button, but would rather have it at the calendar or contacts button.
Cingular 8125
ROM 1.8.11.1WWE
WM5
A little program called WM5NewMenu should do it. It's free, just put it into a google search.
calouro said:
A little program called WM5NewMenu should do it. It's free, just put it into a google search.
Click to expand...
Click to collapse
Thx, but all this did was to let me rename the word "calendar" to "device lock", with the actual calendar program still assigned to the left softkey.
Cingular 8125
ROM 1.8.11.1WWE
WIZA100
I'm trying to get some directions for the program, from doing a little research on google it looks like you can reassign the button with that program, just have to figure out how. I'll look for some direction on the program.
Ok, I figured it out.
Goto WM5newmenu, under "launch by:" select "Left Softkey" Then under "Soft Key Label:" enter your label (ie. "Lock")
Then goto the "items" tab. select "new" then select the little box next to "parameters:" select "windows" then ""go into" at the bottom.
Scroll over to "BSDeviceLock.exe" then hit "select"
Then enter "lock" or whatever you want under "item label:"
You will see the new entry on the left side of the screen, you may have to scroll down a little. You can uncheck all of the other items and just leave the new "Lock" item you created. After that select ok and do a soft reset.
After it resets, hit your left sofkey, you will see your newly created lock pop up. Then just hit the center button on the pad! It locks!! I just did this and it works!!
Hope this helps,
Just found this, it's even better then WM5newmenu:
Reassign left softkey on Today screen to open Notes application
Use Total Command to navigate to HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\11 2
Change the “Default” key to the name that you want to appear on the button (in my case Notes)
Change the “Open” value to the location of the program you want to open (in my case “Windows/Notes.exe” ( you would enter “Windows/BSdevicelock.exe”)
Perform a soft reset
Look in your windows folder to see if you have BSdevicelock.exe if you don't let me know and i'll get it to you.
calouro said:
Just found this, it's even better then WM5newmenu:
Reassign left softkey on Today screen to open Notes application
Use Total Command to navigate to HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\11 2
Change the ?Default? key to the name that you want to appear on the button (in my case Notes)
Change the ?Open? value to the location of the program you want to open (in my case ?Windows/Notes.exe? ( you would enter ?Windows/BSdevicelock.exe?)
Perform a soft reset
Look in your windows folder to see if you have BSdevicelock.exe if you don't let me know and i'll get it to you.
Click to expand...
Click to collapse
I did the registry edit, and when I tap the left soft key, I get "the file device lock cannot be opened due to an untrusted certificate, or one of its components is missing." I could NOT find BSdevicelock.exe in the Windows folder. Where in windows should this file be located?
I would like that BSdevicelock as well, if I could.
Its in the root windows folder, you probably don't have it.
I'll attach it as soon as I get home from work tonight!
Just copy it into your windows directory.
BSDevicelock
Just unzip this and place it in your windows folder with the registry change.
Hope this helps!
calouro said:
Just unzip this and place it in your windows folder with the registry change.
Hope this helps!
Click to expand...
Click to collapse
Got it good buddy! I kept the other items in WM5NewMenu and labeled the softkey "Menu", and changed BSdevicelock in the label box to Device Lock. Now all I do is hit the new softkey "Menu", scroll to device lock, hit the center button on the D pad. Device locks like you said it would! I was able to do this after extracting the BSdevicelock.zip to my Windows folder. Excellent instructions! Thx a MILL! If you discover anything else that's appealing, let me in on it..o.k.? Just found out I could move Device Lock to the top. Now I don't have to scroll down.
Cingular 8125
ROM 1.8.11.1WWE
ROM date: 2005
No problem, glad I could help!
hotdog53 said:
Got it good buddy! I kept the other items in WM5NewMenu and labeled the softkey "Menu", and changed BSdevicelock in the label box to Device Lock. Now all I do is hit the new softkey "Menu", scroll to device lock, hit the center button on the D pad. Device locks like you said it would! I was able to do this after extracting the BSdevicelock.zip to my Windows folder. Excellent instructions! Thx a MILL! If you discover anything else that's appealing, let me in on it..o.k.? Just found out I could move Device Lock to the top. Now I don't have to scroll down.
Cingular 8125
ROM 1.8.11.1WWE
ROM date: 2005
Click to expand...
Click to collapse
I use MortSaver (Phone Edition) which locks and blanks screen and relocks/blanks screen after calls/reminders etc..
guys you seem to me to be making this quite hard for yourselves
use this softkey app to change the softkeys (3rd post)
use this device lock app.
go to start/settings/system/softkey and select the device lock app
and soft reset, softkey changes generally don't occur until after
bbobeckyj said:
guys you seem to me to be making this quite hard for yourselves
use this softkey app to change the softkeys (3rd post)
use this device lock app.
go to start/settings/system/softkey and select the device lock app
and soft reset, softkey changes generally don't occur until after
Click to expand...
Click to collapse
None of your "this" links worked for me. Besides, I'm content now.
My old simple Nokia 6200 had a feature whereby the keypad was locked automatically without need for a PIN three minutes (selectable) after a call when there was no activity.
Is there any easy way to implement this ? I can map H/W keys (thanks to Molski) but this isn't quite the same.
calouro said:
Just unzip this and place it in your windows folder with the registry change.
Hope this helps!
Click to expand...
Click to collapse
Is BSdevicelock better than the lock app already on the device in the Windows folder??
The app im talking about is called devicelock.exe on my device. I have an HTC Wizard
I did not have devicelock.exe in my windows folder originally. BSdevicelock is just a little program that simply locks the device. I don't have devicelock.exe, but I imagine they probably do the same thing. I think BSdevicelock is actually installed by the BatteryStatus program. If you have a later version of Battery Status, you should have BSdevicelock.
Related
I am using the smartkey program to hold the softkeys to enter startscreen.
Now I am looking for an option or a program to copy/paste and to put it under the message button.
Or does anybody knows a program that only gives the option to cut/copy/paste.
With this my phone would be perfectly tunned.
aage said:
I am using the smartkey program to hold the softkeys to enter startscreen.
Now I am looking for an option or a program to copy/paste and to put it under the message button.
Or does anybody knows a program that only gives the option to cut/copy/paste.
With this my phone would be perfectly tunned.
Click to expand...
Click to collapse
If the context menu of the program contains copy and paste, you can hold the center key of the 5-ways navigator to popup the context menu.
water
Hi Water,
Thanks, but not all programs have that option. That's why I like to have a program like that.
Right now i'm using Magicbutton but that doesn't have that function. GSMagic had it but I like Magicbutton better. So now I need the copy/past function.
You can try Xbar which is under the D-Pad. It opens up a screen in which you can select the running task but also shortcuts to programs of your liking and there are shortcuts ready for copy and paste and cut.
Wouter
You can use PQz to map a hardware key (I use the Windows-key) to CTRL, so that you can use ctrl-c, ctrl-v etc.
http://forum.xda-developers.com/viewtopic.php?t=33343&highlight=ctrl
I think... just speculating here.. that they are more looking for...
press button - it copies whatever is the active selection
press button again - it pastes whatever is on the clipboard
Not sure, though... ctrl+c / ctrl+v works with the SIP, with that tool it works with the hardware keyboard, and if you're working with the sip - and thus a stylus - you can often just tap-and-hold and choose copy from the context menu.
PHM Keys comes with cut copy paste.
Use a button mapper to do as ZeBoxx says, if it's what you need, and you'll have quick access to said functions.
V
Thanks,
I'm using PQZ now. With TAB as CTRL. WIN would not work together with smartkey, because hold button 1 is the same hex number as WIN.
But this program is realy good.
My Solution to this...
I have a slightly hacked up copy of PHM Keys (couldn't get it to install on my 8125, so I hacked it off of a WM2003 device) that I'm using to solve this problem.
In my Start Menu I have three icons - "Object Copy", "Object Cut", and "Object Paste" (PHM Keys) so whenever I have something highlighted I click my (smartskey modified) Start Menu soft button, scroll down a slot or three with the 5-way, and select the copy/cut/paste operation I need.
When the KB is open it's even quicker Start-o Start-b Start-j respectively. Another plus is this works in nearly EVERY situation where you can highlight something. Sometimes the other options (context menus, SIP kbds, etc.) don't work everywhere.
Now some may not want to waste three Start Menu slots, but I have Tray launch filled with my apps, still have 4 Start Menu slots available, and all my non-soft buttons are mapped to one app or another, so I'm cool with them.
Plus I have my SIP pop-up KB completely disabled (I hate it's "intrusiveness" and only use the HW KB in landscape mode) so in portrait mode I had *NO* way to copy/cut/paste and had to devise something.
Good Luck
-JMS
I've updated VJKeyPress to add -cut, -copy, -paste.
On my website.
V
Is it possible to actually 'close' programs using the internet explorer hard button?
I have SPBPlus installed, and the 'x' button is set to actually close programs rather than minimize then. When i assign the (ok/close) behaviour to the internet explorer button, and then use it to close a program, it only minimizes it.
So basically, is it possible to make my internet explorer button actually close programs?
thanks.
Yes it is possible with SPB Plus installed. Look further down the list of options and choose [Close]
This should do the trick.
I use Wisbar Advance 2 for that. I also have a .cpl that you drop in your windows folder that will show up in Settings>System>Soft Key so you can use the soft keys as a close button. I have the left SK for Windows and the right SK for a Close button.
whats good said:
Is it possible to actually 'close' programs using the internet explorer hard button?
I have SPBPlus installed, and the 'x' button is set to actually close programs rather than minimize then. When i assign the (ok/close) behaviour to the internet explorer button, and then use it to close a program, it only minimizes it.
So basically, is it possible to make my internet explorer button actually close programs?
thanks.
Click to expand...
Click to collapse
Hello whats good,
Seems Like no one in the above posts interpreted what you meant.
I understand that U want to close your apps. with the HARDWARE BUTTON <INTERNET EXPLORER>
I assume (As u have stated above) U have set <ok/close> as the Action assigned to it.
Thats why It Minimises it.
To CLOSE IT FULLY. simply assign <CLOSE OK>
SCROLL DOWN >>>
Ok/CLOSE and CLOSE OK are Two Different Things.
That shall close it Proper.
PS::I too was using OK/CLOSE previously. Thanx to your Post I am able to Close my apps Fully.
One thing though It takes a mere 1.5 seconds to open my 2900 Contacts Book. But My device is lighter all the time with all the memory Hogging apps Down !!
One more thing I shall add (editing My Post)
Only those apps. whose page is Open shall be closed by this.
Not the background apps.
I know this doesn't answer your question, but you should install smartskey and use the right softkey button to close apps. Alternatively, the end call button seems to close most apps.
thanks for the replys, all helped, i've finally managed to actually close programs without having to always touch the little x in the top corner with my big clumsy thumb!
Im not really familiar with pocket windows but basically, can i create a shortcut to a specific folder. I know there are buttons linking to my documents, and on SPB plus you can have a link to my documents on your today screen, but can i choose a shortcut to a specific folder i have created, on my memory card, and put the shortcut on the today screen?
Thanks again again!
Post the .cpl file?
hellomoto_25 said:
I use Wisbar Advance 2 for that. I also have a .cpl that you drop in your windows folder that will show up in Settings>System>Soft Key so you can use the soft keys as a close button. I have the left SK for Windows and the right SK for a Close button.
Click to expand...
Click to collapse
Can you post this .cpl file? I want to try it. Thanks
whats good said:
can i choose a shortcut to a specific folder i have created, on my memory card, and put the shortcut on the today screen?
Thanks again again!
Click to expand...
Click to collapse
with the spb pocketplus plug-in, you can. click (and hold) on it and a dialog box will open, do the following:
choose Add/Remove Items...
choose Add (left softkey location)
choose Folder
select the folder that you want (you can press on the '+' sign at the storage card folder in order to choose sub-folders)
Is there a solution to map the OK button to an app which closes programs?
AE Button Plus does not allow to map the OK button.
It does, you select 'File' then 'Add button'. Press the OK button and then 'Add key' and it will be added to the list where you can assign it to an action.
varden said:
Is there a solution to map the OK button to an app which closes programs?
AE Button Plus does not allow to map the OK button.
Click to expand...
Click to collapse
PQzII will fulfill your need
blcc said:
PQzII will fulfill your need
Click to expand...
Click to collapse
I cant find any manual for pqzii where i can learn to use it..as when i run the program it does nothing nothing...and even doesnt came with any manual...
any help on that??
daedalia said:
It does, you select 'File' then 'Add button'. Press the OK button and then 'Add key' and it will be added to the list where you can assign it to an action.
Click to expand...
Click to collapse
OK.
But which one is correct: #4075 or #405C?
Sometimes I get the first one sometimes second.
sajib said:
I cant find any manual for pqzii where i can learn to use it..as when i run the program it does nothing nothing...and even doesnt came with any manual...
any help on that??
Click to expand...
Click to collapse
I beleive pqzii is a good program to map the keys, but unless someone posts a manual as to how to use it, this program will render useless to newbies. Of course, those who are very knowledgable in programming will be the only ones benefiting from the hard work of the writer of this program.
Bottom line, how to use this program? Can someone who knows how to use it be kind enough to give us, newbies, some help?
Personally, I am using the X button program and it is great. I like to map the bottom OK button to become the X button to close programs from running in the background.
Thanks in advance to those who are willing to help.
My experience is :
1. Go to the install folder of PQzII with file explorer (picture 1)
2. Choose PQzII setup.exe (picture 2)
3. Tick the "Use OK button(Task Close/All)" checkbox under Windows option (picture 3)
4. Untick the " Use this function" checkbox under Icon option (picture 4)
5. Create a shortcut to Windows/Startup folder (picture 5)
HI blcc:
Thanks for the above. But the OK buttin still does not close the program - as I click it, it seems to have closed it but I looked at the Memory to find out the programs running - the one tat supposed to have been closed is still there.
BTW - One more newbie question about step 5 - how do your create a short cut to the Windos\StartUp?
Thanks again.
paulclo said:
HI blcc:
Thanks for the above. But the OK buttin still does not close the program - as I click it, it seems to have closed it but I looked at the Memory to find out the programs running - the one tat supposed to have been closed is still there.
BTW - One more newbie question about step 5 - how do your create a short cut to the Windos\StartUp?
Thanks again.
Click to expand...
Click to collapse
I can really close the program with OK button after apply the setting. For creating a shortcut, I use resco file explorer, tap and hold at the item and a pop up menu will appear. Choose "cut", and go to the statup folder, tap and hold again and choose "paste shortcut". That is.
Hope you understand my poor English.
blcc said:
I can really close the program with OK button after apply the setting. For creating a shortcut, I use resco file explorer, tap and hold at the item and a pop up menu will appear. Choose "cut", and go to the statup folder, tap and hold again and choose "paste shortcut". That is.
Hope you understand my poor English.
Click to expand...
Click to collapse
Hi Blcc:
Your English is very good and it makes mine pale.
Thank you once agin, my OK button now closes running program and there is nothing is the background.
I hope others who are hoping to utilize these two programs will happen to read this thread.
Thanks a million.
varden said:
OK.
But which one is correct: #4075 or #405C?
Sometimes I get the first one sometimes second.
Click to expand...
Click to collapse
4075 is what mine is set to.
PQzII was a bit buggy for me.
is there a way to have exceptions to closing the programs?eg:i like messaging and contacts to always be running in the background so if i press the ok hardware button it only minimizes messaging and contacts while really closing the other applications.
Hi,
I created HButton for smartphones. BUT I have no smartphone so I developed it on smartphone emulator.
I will be very gladly, if there is someone who can test it.
Please note: Test it on your own risk - never been run on real smartphone.
thanks
Hundera
Great! While I have no time to test it right now, I'll frontpage the news if it turns out to be working!
when i get to the assign window, i get stuck there, don't know what's the next step
oldsap said:
when i get to the assign window, i get stuck there, don't know what's the next step
Click to expand...
Click to collapse
Hi,
I created it little messy. It has to be changed before official release.
* Using * assign it to any HW button. I don't know if there will be name and icon of selected button or just something like "unknown 40C1".
* Create list of applciations
* Left and right button select preferred application* enter to add it to list* Press OK.
thats all. Now you should be able to start application using HButton....
What now?
I managed to do almost everything:
I assigned applications to the list of button1,
I clicked on '*', and so
Assigned to (*) displays "Unknown 40C1"
When I run the application Button1 manually, the application I chose for Button1 is run.
But what now? What do I have to press to make the application run? What is button1? I tried all buttons, pressing for various lengths of time, but I can't get it to run.
Do I need to edit the registry so that the application "Button1" is assigned to some button?
Hi,
at first thanks for help.
"Unknown 40C1" means - there are registry part about this button. In SPh, there's missing names of buttons - so name is unknown.
I has no SPh, only emulator. I checked registry and there is all ok - only names are missing. All flags and path to applications that should be started are similar to pocketpc.
These registry settings are altered by my program so HButton1 should be started by button with code "40C1". What button it is - I really don't know. That's what I need to test.
But as you describe it, it looks like that these settings are ignored.... So Where is settings of button's behavior on smartphone?!?!
ghostwheel said:
I managed to do almost everything:
I assigned applications to the list of button1,
I clicked on '*', and so
Assigned to (*) displays "Unknown 40C1"
When I run the application Button1 manually, the application I chose for Button1 is run.
But what now? What do I have to press to make the application run? What is button1? I tried all buttons, pressing for various lengths of time, but I can't get it to run.
Do I need to edit the registry so that the application "Button1" is assigned to some button?
Click to expand...
Click to collapse
not totally sure
I'm no expert in this.
If I understand correctly, one way to do it is through links in the \windows directory,
so
\windows\short_MSG
is a link to the program called when the message button is pressed
\windows\short_Camera, and short_IE
are for camera and explorer button.
But I think there are also other places to set these. And some phones allow long_MSG,IE,Camera links for long button press - not mine.
I tried to copy the Button1 link to short_MSG, and that managed to run the first command in the list for button1, but not the next on a longer press. (And it still launched the message program first, so there must be a second place that determines what is launched...)
Maybe people in the smartphone forum will have more info...
All this was on an s620 WM6.1
just a few more comments
Now that I can get HButton to partially run, I have a few comments:
I'm not exactly sure why, but going from HBSetup to configure buttons 1 and 2 takes a really long time. HButtonTask is much shorter. Maybe it is because a list of all programs is generated, and this takes time? In any case, maybe one could display a message "please wait..." - the first time I thought the program had crashed.
Pressing left (instead of right) when the bottom selector in HButton1 setup shows <None> crashes the program (ArgumentOutOfRangeException)
In HButtonTask setup there are two arrows below Custom delay (I think to chose the delay), but no number is displayed, and pressing left-right only toggles the boxes.
<Start Menu> doesn't work. <Clock>, <Toggle BT>, <Quit>, <Today> do work. <Back> behaves a bit differently than the Back key - it switches between tasks, instead of screens - but that's ok and can be useful!
In the HButton1/2 setup screens, I would change the left softkey to "save" instead of "ok". Too often I pressed that button instead of the center/enter button to change the action on the list. Because it takes ~10 seconds to enter the screen again, it is quite annoying....
Hi
I am really interested in this project if is still under developement
I'm using Atom Pure /w WM6 0.7.2 01172008C1WWE 6MBPP
+ HTC Home Plugin
I have silly questions:
how to re-assign 2 shortcut on the (bottom) command bar on the first page?
T.q.
Oery said:
I'm using Atom Pure /w WM6 0.7.2 01172008C1WWE 6MBPP
+ HTC Home Plugin
I have silly questions:
how to re-assign 2 shortcut on the (bottom) command bar on the first page?
T.q.
Click to expand...
Click to collapse
can you explain further what you wanted to create shortcuts mate? is it the soft button(left and right) at the bottom. If so, just use the built in soft key customizer in the ROM.
hi brian
i use the key customizer, but when i change it, it's say "error opening the shortcut or locating the target filename"
what should i do ?
thank you
PiaL said:
hi brian
i use the key customizer, but when i change it, it's say "error opening the shortcut or locating the target filename"
what should i do ?
thank you
Click to expand...
Click to collapse
do it this way, lets say you have installed htc action screen and wanted to create a short cut on the left soft key.
open soft key customizer, then select customize.
label anything like NEW or HTCA or anything that you want. (In my case I use new) click ok
Then select the correct path with the .EXE e.g. /windows/HTCActionScreen.exe (I believe it should be written precisely if it's upper case or lower case so correct me if im wrong hehehe)
You are almost done! just select anything you want on the right softkey.
Yes on soft reset, presto! a new short cut on the left softkey!
Hope this helps
ow, i see how it works now, thanks brian
oh, i forgot to mention that calendar, contacts, messaging (in the option) don't work, if i select it then tap the key, it say "error opening the shortcut or locating the target filename"
how can i fix this ?
is there anyway to deactivated the softkey customizer ?
i mean to change back to the default setting
thank you
PiaL said:
ow, i see how it works now, thanks brian
oh, i forgot to mention that calendar, contacts, messaging (in the option) don't work, if i select it then tap the key, it say "error opening the shortcut or locating the target filename"
how can i fix this ?
is there anyway to deactivated the softkey customizer ?
i mean to change back to the default setting
thank you
Click to expand...
Click to collapse
all the options worked for me. calendar/contacts et al. I personally use it to assign htc action screen on left soft key.
If you want the default ones, just run soft key customizer again then select what was the default key before then soft reset.
that's the problem, the calendar, contacts and messaging didn't work, so I can't select one of them for the right side softkey
Oh well, this is my first problem with this ROM, overall I like this ROM
Thank you