They do appear to work with the Magician but the system becomes unstable afterwards.
Is it due to my OS (Chinese) or are these softwares not really compatible with the Magician. Anyone has any similar experience?
Related
I'm having problems with audible books from audible.com. Specifically, the audible ppc software won't load on my i-mate ppc pe because it claims that it is having problems connecting to the device. Audible's help (such as it is) seems to think that the problem is with activesync 3.7.1 and that installing the old v.3.7 will solve it. Though it sounds to me like audible is just too lazy to support it's product, I tried. Loading v.3.7 doesn't make bit of difference.
Has anyone gotten audible content to work on an XDA II/i-mate/MDA II?
Audible works fine with my i-mate. Are you having problems installing the software or activating it? Personally, I haven't had a problem with either, except the software (upon install) occassionally complains it can't find the device. I find if I try to close the install it will let me install then... or I install via the CAB file.
Jon.
Thanks for the help!
Seems that if you close the box which opens when the install program "tries to connect to the device," then the install program continues to work properly and successfully installs version 3.5 onto the pda. After this, the pc-based software recognizes the pda and transfers programs to it which are usable.
Activation occurs normally for both the proprietary program and MS's Reader.
Audible.com would be wise to recognize this situation and take note for tech support purposes.
As the title to this post states, the build versions for these two devices are different. Surely a ROM upgrade will not alter the version of the O/S will it?
MDA Pro: Version 5.0 OS 5.1.1700 (Build 14352.0.1.0)
Jasjar:Version 5.0 OS 5.1.1700 (Build 14354.0.1.1)
Could this be the reason for differences in performances as well as potentially different chipsets in these devices?
Some Universals seem to overclock comfortably whilst most don't, fact!
Some Universals display certain other problems (who cares which ones right now), which others don't, fact.
Readocket Hack tops out @ 520Mhz on jasjar but 624Mhz on MDAPro
It's beginning to look like it's very plausible that HTC may have used different components (with the same spec) to build the Universals and it is a fact that we're not all running the version of operating systems.
It's therefore little wonder that we are all getting such conflicting experiences of good and bad scenarios. Correct me if I've misunderstood the facts and am assuming too much here. But if we are not running identical hardware, let alone operating systems, how can there ever be a universal ROM to cure the varying types of Unversal machines?
Can anybody please shed some light on this as my understanding of these issues is limited. :wink:
No Problems on my JasJar
to expand slightly for those who haven't already read this elsewhere...
Without taking screws out and checking chip numbers, my device and mackaby007's are identical in every way (ROM, Radio, Protocol, Build Number) The only possible difference is that I didn't load any of the extended ROM. (not sure if mackaby007 did?)
However, I have no problems and mackaby007 has...one or two:!:
As he says, is there ANY explanation for this? I understand we're both using minimal amounts of software. All I have loaded at the moment is the latest versions/betas of:
Resco Explorer and Radio, TCPMP, Pocket Weather, Pocket Breeze, and at the moment PocketHackMaster. All thoughts appreciated...
Edit: (I forgot I've got a Citrix client installed too...)
Re: No Problems on my JasJar
sub69 said:
to expand slightly for those who haven't already read this elsewhere...
Without taking screws out and checking chip numbers, my device and mackaby007's are identical in every way (ROM, Radio, Protocol, Build Number) The only possible difference is that I didn't load any of the extended ROM. (not sure if mackaby007 did?)
However, I have no problems and mackaby007 has...one or two:!:
As he says, is there ANY explanation for this? I understand we're both using minimal amounts of software. All I have loaded at the moment is the latest versions/betas of:
Resco Explorer and Radio, TCPMP, Pocket Weather, Pocket Breeze, and at the moment PocketHackMaster. All thoughts appreciated...
Click to expand...
Click to collapse
Yep done that last night (minimum ROM applications install on hard reset followed by soft-reset befor the useless stuff starts to install). Then I ran the Jasjar with just TCPMP and then with HackMaster2005 installed (only). Yet it still bums out. Any suggestions anyone?
I also concur with mackaby007 and sub69 as my JasJar is now identical to sub69s (Rom revision and no external rom loaded - pushed reset button) however I am still unable to overclock the device to 624mhz in a stable fashion.
My JasJar will clock to 624mhz and will not crash however at that speed the LCD gets the occasional flash vertical line somewhere on the screen.
I put it down to the fact that this machine was designed to run at 520 no more so other components in the board layout use a lesser tollerance than if they were aiming for 624. This could be as simple as resistors capacitors transistors. If youre lucky your lesser tollerance part will be within tollerance of a better part and so will overclock better. Its kinda like blueprinting an engine. you use all standard parts but to the tightest tollerances possible and you can get great power gains, same engine same parts but picked at random produces a production engine with guaranteeable results.
Cya
Stot
Hello everyone, i have a problem which i don't know how to solve it. It goes like this.
i) Whenever i am trying to receive files from other phones, the entire process actually hangs. This already happened to me quite number of times. Does anyone knows the solution for this. What should i do in order to prevent this problem to occur again?
ii) How can i send files to other phones using bluetooth option? I have browsed thoroughly but cant find any option saying "send via bluetooth". Is there any option like this is o2 atom life?
Try installing Bluezard software on your PPC. It's an amazing software and lets you handle all your bluetooth problems.
unikorn74 said:
Try installing Bluezard software on your PPC. It's an amazing software and lets you handle all your bluetooth problems.
Click to expand...
Click to collapse
how do i get this?
Well I'm kind of new to the wm scene, I recently bought a htc dual, but i found that is lags to much it's fairly slow compared to my T-mobile dash which I had also updated to wm 6.1. Can anyone tell me if there is a way to increase the phones speed.
This is Windows Mobile so it must work slowly. This is not other phone without operating system
I know that, I had the dash before the dual, what I'm asking for is software that is a little more reliable than the original software for the dual, because of the simple fact that it lags more that 6.1 kavana which I used on the dash.
I meant then
If you've still got the stock ROM on it may be an idea to have a look at one fo the custom ROMs in the Nike Upgrading forum. Depends if you want to stick with WM6.1 or go with WM6.5 (don't forget it's all beta though).
Some cooks do lite ROMs with a lot of the apps ripped out so see if there is something that matches your requirements.
Hi - has anyone has sucess in getting this to work with the HD2? It works great with my old touch cruise. It looks like a problem with the change from WM 6 to WM 6.5.
Cheers,
Geoff
I am having the same issue and would be very greatful for a solution
I'm getting a "security database" error.
I'm hoping that it may just be a BT Stack issue and that a new Radio Version may solve the problem.
I'm still on Rom 1.48 with Radio 2.06.51.07 - has anyone had any success with other Rom or Radio versions?
.
hopes
oh i hope this gets figured out. i love my celluon and as it seems the company is not really around anymore we must turn to each other.
too bad i'm stupid...
I have the same, i managed to pair & connect via Bt but i get the security message when trying to select it in the keyboard menu! Anyone know of any success with a different radio maybe?