Database Users

Device in standy and bluetooth

I have a Qtek 9100. I have seen that other people have problems using the bluetooth voice dial when the device is in standby. Not only do I have this problem, but I am unable to use OBEX file transfers when it is in standby.
Using my iBook I can see my Qtek as an available bluetooth device. I get the standard dialog stating that this file type is not supported, should I send anyway (always the same question, always the same answer). When the device is in standby, however, I then get "The file transfer failed: internal error"
If I turn my device on, I go through the first two steps from above and the file transfers perfectly.
Anyone else have this problem? Any solutions to the bluetooth dialing problem yet?
I have:
ROM Version 1.1.7.5
Radio Version 1.1.10
ExtRom Version 1.1.7.105

I have found only deltalock solution.

but I imagine the battery drains quite quickly like this.
How come some 9100/K-Jam users don't have this problem?

marsonist said:
How come some 9100/K-Jam users don't have this problem?
Click to expand...
Click to collapse
Good question, woul really like to know the answer, too. :roll:

bt issue |2k3SE|

Hey when i try to enable my BT it says "There is no Bluetooth hardware instaled on this device."
What shall i do?

Mr-Sale said:
Hey when i try to enable my BT it says "There is no Bluetooth hardware instaled on this device."
What shall i do?
Click to expand...
Click to collapse
Go to your extended ROM >>> see if there is a BT.cab there, and of so run it. Otherwise you may have to reflash the ROM. Maybe others will advise differently.

Nope...that aint there... i searched a few extended rom compilations but couldnt find any BT.cab or similiar cab

BT
Mr-Sale said:
Nope...that aint there... i searched a few extended rom compilations but couldnt find any BT.cab or similiar cab
Click to expand...
Click to collapse
en
Given we are using the same ROM version (Sin's merged), then I think the drivers are there but it sounds as thought the icon (BT_Icon.cab in the ROM) may be missing. What you could do is download BTH Tools v.1010 from XDA-Developers ... I found it yesterday by doing a search. This is installed from a PC and may help you get it going. It is not a BT engine, merely a means of activating/deactivating BT and it shows which battery is in use as well.
I have a weird one as well in that my BT works well in connecting with a laptop computer, but when I use it with a Plantronics M3000 BT earpiece, I have to re-do the connection the hard way (i.e., pair the damn thing) after every time the XDA II is suspended. I don't think it is the Plantronics device (which is a piece of ****e in my experience) alone .... will sort it even if I have to buy a better BT earpiece. Maybe others have some advice??

Bluetooth is totally pants

Is anyone else finding that their bluetooth is really slow at sending and receiving items. Also that there is no way to send items direct to a contact that is in your partnership list, you have to search for them every time you want to send something. If someone has found ways around these problems, please let me know.

an adaption of the Blue angel's bluetooth interface would be lovely. It had loads of options, and let you explore remote devices. This is just like the XDA2.
Would it be possible to port the BA software onto the wizard? I think it uses a different BT stack.

they were able to port the wizards rom to run on a blue angel. I guess they should be able to use the blue angels bluetooth on a wizard.

Please help - is so annoying
Ok, after a little research i found this thread http://forum.xda-developers.com/viewtopic.php?t=33532 .It has an app which i installed and has helped a little. I can now send images direct to people i have paired with without having to search local bluetooth first. The thing is it only sends images to paired people. I want it to also send sound and video files. When in file explorer, holding down on an image brings up the extra option of "Send image via bluetooth" which then allows to send by the already paired devices. When doing the same on videos and sound, it doesnt give this option. Maybe this can be done in the registry, but i dont know alot about that so maybe someone could help?

i tried this on my kjam and i had a problem with it, so i uninstalled it.
the problem i had is that the bt keep switching off by itself with no reason, even if i was already syncing over bt, the connection is lost suddenly and i found out that the bt is off (even though the bt icon on the system tray shows its still on).
i don't know about you guys, but i had this prob twice, i reinstalled it again and gave me the same prob.
i can live without it.

Ok, maybe that stack is not all that great. After soft reset lost all sound, and BT does not work properly. Uninstalled and back to normal. So again is there any way to send to people in your paired list without having to search for them every time. Is becoming a pain coz some new phones turn off discoverable after 60 seconds. So they have to keep turning theirs back on. Its a simple option, dont know why they didnt put this in. Any help?

I haven't seen more than 50-60KBps. Has anyone else seen higher transfer rates?
Wizard's BT is useless. Buggy, slow and poor.
And it is not v2.0, it is v1.2
It does not have EDR.
It doesn't even have PAN ffs... :x

tsiros said:
I haven't seen more than 50-60KBps. Has anyone else seen higher transfer rates?
Wizard's BT is useless. Buggy, slow and poor.
And it is not v2.0, it is v1.2
It does not have EDR.
It doesn't even have PAN ffs... :x
Click to expand...
Click to collapse
Info about BT in wizard. Directly from BT CIG's site. The problem is not with the Wizard, it is in usin MS BT stack.

thanks for that emmeborn, if the problem is the stack, do you know of a stack upgrade which works good? I tried the stack form the blue angel, but stuffed up my phone, so uninstalled it.

actually, i just looked at those pdf files, and at the bottom where it has the revisions, seems they have launched a version around 1 month ago. Would this be a software or hardware update. If its software then i reckon this could solve alot of problems im having.

Enervate said:
actually, i just looked at those pdf files, and at the bottom where it has the revisions, seems they have launched a version around 1 month ago. Would this be a software or hardware update. If its software then i reckon this could solve alot of problems im having.
Click to expand...
Click to collapse
It is the long awaited rom update. A test version of that rom has already leaked. You can find more info in the Wizard upgrade forum topic about that version.
I am awaiting the localized swedish version of that rom and the latest about that version is that it should be released mid March.

XD Mini not seen by WMP 10?

Hi all
I have tried searching the forums but found nothing on this subject.
Does anybody else have a problem with MS WMP 10 not seeing a connected XDA Mini S as a portable device? Come to think about it, this also happened with WMP9. And with both O2 ROM 1.5.x and 2.21.
In detail - WMP10 permits me to try to set up music synchronisations, but then doesn't list the XDA even when it is connected. It even offers me some helpful advice: to connect to a portable device with at least 32MB, but since this device isn't listed that's not much good!
Any ideas out there?
Julian

Hi,
I am facing the same issue. It was working just fine till today, now when I try syncing WMP10 it just doesnt see the device.
Soft reset/reinstalling WMP10 dint help either....now I am wondering what next to do...

Try re-installing ACTIVESYNC, had this problem last week and re-install of AS solved it.

Fixed!
bny castro - you are right! Reinstall Activesync and all is fixed1
Cheers,
julian

glad it all worked out for you

Thanks to everybody & plz. help me on something.

Hi Everybody,
First of all I would like to extend my ultimate gratefulness to all the people who are maintaining this wonderful forum. I had solved many a problems of my O2 Mini from many of the threads in the forum. I had registered to this forum some time back but till date never had put up a post as I am not a developer (just consider myself as an advance user) to contribute anything worthwhile and everything I need to know is always somewhere here. Anyway thanks a lot again to all you guys.
Now I have a problem which I haven't been able to find the solution for. I have a O2 XDA Mini (HTC Magician as per this forum), upgraded with big storage O2 ROM 1.12 / 1.12 from this forum, 512 MB SD and loaded with a variety of softwares as per my requirements from time to time. I had been using the phone perfectly for some time after the ROM upgrade but the problem right now is that I am not able to hear any sound during incoming / outgoing calls. The SMS works well. At other times, the sound works normally for all other uses. I had also installed the BT s/w for both bluesoleil as well as widcomm found here.
I would be very grateful to anybody can give me the solution to the problem and any links where the solutions to the problems are given. Thanx a lot again.
Regards,
Gyan

If the problem happened after installing other BT drivers, then try uninstalling them.

Hi Zerimar,
Thanx for the suggestion but it still doesn't work. I have even done a hard reset. Do I need to change the ROM.
Regards,
Gyan

You mentioned everything worked fine for a while after the ROM upgrade, before you started having the problem ... so I don't think it's the ROM upgrade. Was there a particular app you install prior to the problem that could've caused it? It's very rare the phone will lose incoming/ outgoing sound. It almost sounds like a H/W problem more than a S/W problem.

I recall one instance and that's with respect to the A2DP hack. It happened to a few users including myself.

I forgot to mention that the sound is working fine with earphones.

gyan_th said:
I forgot to mention that the sound is working fine with earphones.
Click to expand...
Click to collapse
Defn sounds like a hardware problem them. Have you ever dropped the phone?