Related
I just got my new Wizard ([email protected]).
As I used Magician ([email protected]) before, there is a smart dial option for the phone.
I can make a call with "ONE Finger" but in my Wizard..I have to scroll all contacts to make a call.
Is Smart Dial option available in others e.g. Qtek, i-Mate...etc?
Can please help to extract this for me???
Many thanks
If you go in the ftp under uploads\kjam you can find the extended rom of this device (imate kjam) that support smart dialing. Inside the extended rom there is a file named Default_SmartDialing_enable_0915_signed.cab. Perhaps this help you.
thanks
BTW, what's the username and password for login ftp.xda-developers.com?
Or....would anyone can help to extract the files for me?
Thanks!!!!!!!!!!!!
Copy the files to your ppc and run then from within the ppc exporer,
then it will be installed, you don't need to extract anything.
I will send you the files tonight ;o)
Thanks guys!!!
I final got the files "Default_SmartDialing_enable_0915_signed.CAB" and install into my Wizard Chinese Version.
But there are no different and no way to enable SmartDialing.
Would anyone can have a screen capture on it or show me how to enable it.
I still need to search thru the whole contact to start a call.
Thanks
Could you please post the file cause i have the same problem on my i-mate k-jam
Thanks
If you have a KJAM you already have smart dial.
To enable smart dial you have to open the dialer (press green button) and then press right softkey to open the menu, the bottom selection is SMART DIALING OPTIONS that enable/disable the function.
Here is the smartdialing cab...I have installed in chinese Dopod 838 (K-Jam) and no effect
I just think the files seems too small...do anyone know is it enough for installing SmartDialing????
Hey, I'm also using Dopod838 Chinese... The quick dial is enabled by default... no need to do anything in addition. When you're in the phone applet, press your right softkey and select "快速撥號 (I)" can setup speed dial numbers. 8)
He's refering to Smart Dialing, not Speed Dial Tse... The file size is correct miko... How did you install it? Did you copy the cab file to your storage card or whatever and run it from there?
One thing I missed, is the O2 Dial Wizard on my IIs.. It let you edit the number before dialing and set carding card prefix etc.. Too bad it doesn't seem to work on WM5 or my Exec
I recommend on using Phoneplus which I realized is suitable for WM5.
I have tried the CAB file and it is not working, too.
Anyone successfully run Smart Dialing on Dopod 838? I miss this application very much! :roll:
I found the CAB file actually only activate the smart dialing, which does not contain any program file. The program files should already installed in the K-Jam default ROM.
So I think the smart dialing will be able to run in Dopod 838 by copying the following files from K-Jam devices:
- \windows\phcanhtc.dll
- DPadMenu.dll
Anyone can help? :wink:
This is the Smartdialing program i used for XDAIIs before, u can try to install it into the 838, please give result after try.
Thanks Vincentfung for the file. :wink:
I have tried to install the cab. However it doesn't work nor have any change to the dialer. I think it is for WM2003SE. So... we need the WM5 version of Smart Dialing that found in English K-Jam or English Dopod 838, or maybe Universal...
This one is on my device, and it should work ?
qtek9100 / Vario
Dear all 818pro(ENG OS)
The reason causing memory card disappear problem is dopod built-in software.(inside Extension Rom)
Only one method to solve, hard reset the PDA but without installed any built-in software as follow:
Right now I hard-reset the PDA, until the password setup, and then the PDA begin install build-in software...soft reset immediately.
If you used above hard-reset method which don't installed any built-in software. You only lost:
1. Smart Dailer
2. Built-in Voice Commander
3. Autoconfig
4. clearvue pdf
I used two days and everything work fine. You may ask why I so sure? Because I noticed the speed of reading memory card is different before which listed below:
1. Before using above mentioned method: When the PDA turn on (In sleeping mode and phone on mode), it need 1-3 seconds to read the memory card. If you installed Today Plug-in Software, you may found that it need 1-3 seconds to detect the memory card.
2. After using above mentioned method: When the PDA turn on, the PDA detect the memory card simultaneously.
As a result, I can assure this method can solved the memory card disappear problem.
Some experience would like to share with all user:
1. I installed all programs in the ROM. If someone installed programs in the memory card, please let me know the result.
2. I can installed back the smart dialer software. Please search this forum to download.
3. When you connected GPRS, a 'Disconnect' button (and Timer) to the Connection List for GPRS is disappeared. You can make registry hack to switch back.
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
To add a Disconnect button:
HKLM\ControlPanel\Phone\Flags2 = 8 (DWORD decimal)
To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
HKLM\ControlPanel\Phone\Flags2 = 16 (DWORD decimal)
To disable both the Disconnect button and the timer:
HKLM\ControlPanel\Phone\Flags2 = 0 (DWORD decimal)
4. PDA can detect 'Phone Service Provider' automatically. However, when you need GPRS, you need manuel setup. I used 'PEOPLES' which is Hong Kong Service Provider and take as a Example setup:
Go to Setting > Connections > Tap Connections
1. Choose > My ISP - Add a new modem connection
2. You need to enter > a Name (Which name you like) and Select a modem [Cellular Line (GPRS)] > Next
3. Acess point name : Peoples.net > Next
4. Ignore the user name and password. > Finish
Thanks for the Reg Hack!!! Worked perfectly on the Dopod 818Pro!!!!
Thanks!!!
voyager
sas90850 said:
2. I can installed back the smart dialer software. Please search this forum to download.
Click to expand...
Click to collapse
Hi sas90850,
What a good job you've done! Excellent!
I'm wondering whether this topic is the instruction you said (WM5 smart dial)
or you could point out where I can download the smart dialer software and have an installation instruction, thanks.
I've 818Pro and would like to do the same "UPGRADE"... :wink:
Dear all user
you can download the built-in smart dialer software as following link. Make sure you download the "SmartDialing_enable_0915_signed.CAB" only.
http://forum.xda-developers.com/viewtopic.php?t=32458&highlight=smart+dialer
Copy the .cab file to PDA and install. Must soft reset. :wink:
If anyone installed software in the memory card, please post here whether the disappear problem is solved. :?:
sas90850 said:
Dear all user
you can download the built-in smart dialer software as following link. Make sure you download the "SmartDialing_enable_0915_signed.CAB" only.
http://forum.xda-developers.com/viewtopic.php?t=32458&highlight=smart+dialer
Copy the .cab file to PDA and install. Must soft reset. :wink:
If anyone installed software in the memory card, please post here whether the disappear problem is solved. :?:
Click to expand...
Click to collapse
Just to let everyone know that you already have this same file as well as the GPRS disconnect button CAB file in your own Dopod 818Pro's Extended_rom. You can browse and copy files in this hiden folder with GSfinder.
This worked for me also with the jamin. I soft reset after hard resetting and it gave me back rom and fixed the sd issue. Thanks
Edit: After soft resetting my device, the start menu once again doesn't show the correct icons for programs loaded on the sd card?? The programs will open and work but the icons are displayed?
Hi, this method seems to have solved most of my Jamin troubles too! Thanks!
I need just some help to get the GPRS timer: I don't find the registry. Is it in the HKEY_CURRENT USER OR THE HKEY_LOCAL_MACHINE? I found the Control Panel\Phone, but not the "Flags 2" registry that needs changing as described.
Many thanks!
Dear Fidipaldi
You need to add a new registry. Make sure you use DWORD Value. The location is shown below.
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
1. To add a Disconnect button only:
Go to HKLM\ControlPanel\Phone
Add Name = 'Flags2' :arrow: DWORD Data = 8
2. To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
Go to HKLM\ControlPanel\Phone
Add Name = 'Flags2' :arrow: DWORD Data = 16
3. To disable both the Disconnect button and the timer:
Go to HKLM\ControlPanel\Phone
Add Name = 'Flags2' :arrow: DWORD Data = 0
Dear mikewchandler
Question :After soft resetting my device, the start menu once again doesn't show the correct icons for programs loaded on the sd card?? The programs will open and work but the icons are displayed?
1. Copy the program *.exe file which installed in the SD Card.
2. Use File Explorer:
Go to Windows\Start Menu\Programs :arrow: Paste Shortcut
You will get the programs icon.
Dear SAS,
Many thanks for your help!!
It works great! I also managed to get the smart dialer back. The only application that is missing is Clearview.
So far my Jamin does not seem to crash on a regular basis as it did before. It must be the add on software that made the device crash.
Finally I can enjoy the device. Thanks again!
After 5 days. :lol:
Right now I installed a lot programs both in the ROM and SD Card and didn't find any disappear problem. :lol:
One more thing, I also found that the auto soft-reset seems gone too.
I will keep posting here and let you know the result. :wink:
sas90850 said:
Dear mikewchandler
Question :After soft resetting my device, the start menu once again doesn't show the correct icons for programs loaded on the sd card?? The programs will open and work but the icons are displayed?
1. Copy the program *.exe file which installed in the SD Card.
2. Use File Explorer:
Go to Windows\Start Menu\Programs :arrow: Paste Shortcut
You will get the programs icon.
Click to expand...
Click to collapse
Here's what I usually do on a new device or after a hard reset. I have about 10 progs on my sd card (total commander, tweaks2k2, etc...) and I have created shortcuts to them and placed them in a folder on my sd card. I then copy those and paste them in the /windows/start menu/programs folder and everything works well. I've noticed this quirky behavior on the jamin so far?
I did what you recommended by not installing the ext rom. I'm happy with a quicker device and more rom; however, I'm still having this little issue with the icons not appearing correctly in the start menu? Kind of strange. The white and blue default box is what's showing up (as if there is no shortcut icon) but the progs open just fine? :shock:
which program should we install
After Hard Reset and Review the extended rom,
There are serveral progarms avaliable for install
I just wonder what program from Extended Rom should we normally install in order to make phone become functional as the standard automatic install of extended rom?
Secondly, what each one of them is for? does anybody has information?
Thank you very much
sas90850 said:
After 5 days. :lol:
Right now I installed a lot programs both in the ROM and SD Card and didn't find any disappear problem. :lol:
One more thing, I also found that the auto soft-reset seems gone too.
I will keep posting here and let you know the result. :wink:
Click to expand...
Click to collapse
The SD card problem seems disappear but it still soft resets itself after standby and battery charging for a while.
Khuanchai said:
sas90850 said:
After 5 days. :lol:
Right now I installed a lot programs both in the ROM and SD Card and didn't find any disappear problem. :lol:
One more thing, I also found that the auto soft-reset seems gone too.
I will keep posting here and let you know the result. :wink:
Click to expand...
Click to collapse
The SD card problem seems disappear but it still soft resets itself after standby and battery charging for a while.
Click to expand...
Click to collapse
After 6 days used, I don't have any soft reset problem at all no matter in standby mode, sleeping mode and/or battery charging either the PDA is turn on/off......any condition.:roll:
re: Mike Chandler
Try this....
goto settings, menu and unclick just one of the programs in question. select ok and then checkout the start menu. Should be well again. Then go back and reselect your menu button you unclicked earlier. All is well. I'm not sure if this is a permanent solution or not but it does work.
Mike
mtarro said:
re: Mike Chandler
Try this....
goto settings, menu and unclick just one of the programs in question. select ok and then checkout the start menu. Should be well again. Then go back and reselect your menu button you unclicked earlier. All is well. I'm not sure if this is a permanent solution or not but it does work.
Mike
Click to expand...
Click to collapse
Thanks Yes it worked temporarily and then after a soft reset...same. I've narrowed it down a bit. The progs show fine in the bottom of the start menu (recently run progs) but if I add them to the top part of the start menu, they show fine until a soft reset....then they don't again. What I also noticed is if I copy the .exe and paste it in the start menu it shows fine....the only problem was when I copied the .exe and pasted a shortcut to the .exe. Anyway, I've settled on a fix. A few of the progs that didn't display correctly, I've just added to ilauncher.
Don't spend any more brain power on it for now....it must be something specific to me as others aren't posting problems like this. Thanks again
@mikewchandler
First of all it's nice to see you again on this forum!
To fix your problem try installing Signed_IconsDll.sa.cab from the extended rom. This should fix your problem!
@ALL
Regarding the SD card issue, the problem seems to be originating from the file Signed_SD_Driver.sa.cab. Not installing just this cab will also solve the problem.
I would suggest installing the following cabs as well as these improve system stability or add functionality:
CAB-ConnectionSpeedMax.sa
CAB-Shortcut-MMS1-JAVA5XX-CV-Dopod........
CAB-WapPushSMS
Signed_Disable_ErrorReport.sa
Signed_DisconnectButton_3s.sa
Signed_IconsDLL.sa
Signed_PIE_View_Default.sa
Signed_Prophet_DopodAsia_UA.sa
Signed_Version.sa
SmartDialing_enable_0915_signed
Thanks kta....it's great being here but I'm going to miss the eten community. :?
Thanks for the tips. Yeah, I didn't install the ext rom at all....I should have mentioned that (if I didn't?). Thanks again.
Edit: Where's the best place to get the files off the ext rom? I don't guess I know how to extract the ext rom to copy before hard resetting, soft resetting to keep it from installing. Hope that runon sentence makes sense.? :roll:
Hello,
I was made a small mistake with my brand new mda VARIO II,
t-mobile Version.
I was proceed the the cab File: Remove_UMTS_only(networkBand)
In the Windows directory.
File was running, mda was doing something…
but I don’t know wht is now really happened and what will be the
result.
Who knows the function of this cab-File?
Could be possible to get a description of this File-Function?
Is there a way to redo this procedure, without a “HARDRESET” ?
For your help thank you in advance !!
Regards,
Gerhard
schaerg said:
Hello,
I was made a small mistake with my brand new mda VARIO II,
t-mobile Version.
I was proceed the the cab File: Remove_UMTS_only(networkBand)
In the Windows directory.
File was running, mda was doing something…
but I don’t know wht is now really happened and what will be the
result.
Who knows the function of this cab-File?
Could be possible to get a description of this File-Function?
Is there a way to redo this procedure, without a “HARDRESET” ?
For your help thank you in advance !!
Regards,
Gerhard
Click to expand...
Click to collapse
Shaerg
This will have no effect unless you had deliberately selected use UMTS only in the Phone settings screen.
You can check what network bands are in use on the phone by going to:
Start>settings>personal>phone>band. In the select your GSM/UMTS band drop down box you can choose which band(s) to use. The default setting is Auto.
Mike
Thanks!!
Hey, thanks’ for your support!!
I was check my settings: AUTO mode is still active and I can select
between:
- Auto
- GSM(900+1800)+UMTS(2100)
- GSM(1900+850)+UMTS(1900+850)
In the moment, the system is running without any bad effects…
Could you read German? I was just found an interesting Link to a
description for the different CAB files on the vario II
http://www.ppcwelt.info/community/showthread.php?t=97032
Regards, Gerhard
please advice!
Atom Hiddenpartition
Let me give you what you need. You have been very persistent
follow this link. http://forum.xda-developers.com/attachment.php?attachmentid=28395&d=1149224627
If it does not work go to this page and scroll down to the 4th post. It was posted by Kropotov
http://forum.xda-developers.com/showthread.php?t=267305
Copy to your device and run. Soft reset and when you go into files on your device, you should see the conrents of the extrom revealed, asuming it works like on the Atom. Good luck
Cheers
Victor
hi and 10x for the replay.
well it didnt work.
i want to extract the answering machine...
What is the software list in O2 AutoInstall?
1) O2 plus
2) O2 phone plus
please help me to unhide the ext rom i want to take out the answering machine
i tried atom_hiddenpartition_614.cab on my atom exec and it worked
could u pls try it and copy and share the answering machine cab file??
thx
In the TotalCommander write \apkdjlowhjusqsmd
But there is nothing interesting...
1 วันกับความพยายามครับ
**JoyStick 100%**
1.Add Animation
2.Font Original Segoe Condensed
3.Fix Start Menu
4.No MSN,No Office,No Regedit Bundle.
5.Backlight 3 Level
6.Etc.
Now..............................................
Thx. wm6_575_by_yourfei_qipilang
Modify delete nina.ttf and ninab.ttf and Add segoe.ttf,segoeb.ttf
1.Download WM6_575_EN.bin and install by mtty.
http://rapidshare.com/files/48767722/WM6_575_EN_by_MonkeyDay.bin.html
2.Change the "US English" option and Restart your phone.
Install integrate ENlang+T9+Celetask+Camera+Oxios Memory+Full Homescreen.****New Link Fix Album*****
OLD : http://rapidshare.com/files/49048724/t9_EnglishLangWM6FixAll.cab.html
NEW : http://rapidshare.com/files/49164963/t9_EnglishLangWM6FixAll.cab.html
**Before delete Start Menu close all program by Celetask press Camera buttom**
3.Delete "Start Menu" form \Windows\ and Copy new 'Start Menu' to \Windows\
http://rapidshare.com/files/48768479/Start_Menu.rar.html
4.Use ceregedt.exe to HKEY_CURRENT_USER\Software\Microsoft\Shell\StartMenu\Order
http://rapidshare.com/files/48769853/Regedit.rar.html
Delete all and copy.
Internet Explorer.lnk
Tasks.lnk
Windows Media.lnk
Carlenda.lnk
Messaging.lnk
Contacts.lnk
ActiveSync.lnk
Call History.lnk
Settings.lnk
App
Game
Picture.lnk
Replace and Restart your phone.
Enjoy.
************************************************************************************************
Wow!
Thanks for this!
But before I go installing it - is it worth it?
Or will a more final version be out soon?
The last few I've installed I've ended up uninstalling again due to one thing or another - is this verson stable and functional?
Sure sounds like you've knocked a lot of the issues on the head thou!
Hey...
I see on the home screen in your screen dump that you have some funny chars in the text there.
Is this just because of your locale or is this a bug?
Creative7419 said:
**JoyStick 100%**
1.Add Animation
2.Font Original Segoe Condensed
3.Fix Start Menu
4.No MSN,No Office,No Regedit Bundle.
5.Backlight 3 Level
6.BUG Celetask
7.Etc.
Now..............................................
Thx. wm6_575_by_yourfei_qipilang
Modify delete nina.ttf and ninab.ttf and Add segoe.ttf,segoeb.ttf
1.Download WM6_575_EN.bin and install by mtty.
http://rapidshare.com/files/48767722/WM6_575_EN_by_MonkeyDay.bin.html
2.Change the "US English" option and Restart your phone.
3.Install ENLang.CAB and Restart your phone.
http://rapidshare.com/files/48768132/ENLang.CAB.html
4.Install t9 English.CAB and Restart your phone.
http://rapidshare.com/files/48768255/t9_English.cab.html
**Before delete Start Menu close all program by Celetask press Camera buttom**
5.Delete "Start Menu" form \Windows\ and Copy new 'Start Menu' to \Windows\
http://rapidshare.com/files/48768479/Start_Menu.rar.html
6.Use ceregedt.exe to HKEY_CURRENT_USER\Software\Microsoft\Shell\StartMenu\Order
http://rapidshare.com/files/48769853/Regedit.rar.html
Delete all and copy.
Internet Explorer.lnk
Tasks.lnk
Windows Media.lnk
Carlenda.lnk
Messaging.lnk
Contacts.lnk
ActiveSync.lnk
Call History.lnk
Settings.lnk
App
Game
Picture.lnk
Replace and Restart your phone.
7.Copy full.home.xml to Application Data – Home and Change home screen.
http://rapidshare.com/files/48768752/full.home.xml.html
Enjoy.
Click to expand...
Click to collapse
how are you making this rom could you up load the tools
thanks
how many have tried this?
any feedbacks?
garbol said:
how many have tried this?
any feedbacks?
Click to expand...
Click to collapse
I went to try it....
I downloaded everything, shut down Vista to boot up Server3k so I could Mutty and one of my hard drives died. I got the dreaded "This drive has not been formatted - would you like to format it now" error.
A brand new 500G drive it was too!! GGrrr!!
XP Pro gave me the same thing.... and now Vista as well....
I'm too busy at work to sort it right now but once I get the drive back online then I'll give this verson of WM6 a blast, see what happens and report back.
DazzaMc said:
I see on the home screen in your screen dump that you have some funny chars in the text there.
Is this just because of your locale or is this a bug?
Click to expand...
Click to collapse
because locale. They are Thai language in Thailand Locale
English Locale select English United State.
hmmm... got to give this a try ;D
Hi Creative7419,
Many thanks for the job done. Guess this will work on my Dutch T-Mobile SDA as well, right?!
Btw: where should the segoe fonts be copied to, to \Windows or \Windows\Fonts? And what is the added value of installing both Celetask and Oxios memory (they have identical functionality)?
please upload WM6 in others Servers
mediashare wrzucaj.com ....... etc.
ps. is the rom work it in SPV C500 (typhoon)?
wirelezzwizzerd said:
Hi Creative7419,
Many thanks for the job done. Guess this will work on my Dutch T-Mobile SDA as well, right?!
Btw: where should the segoe fonts be copied to, to \Windows or \Windows\Fonts? And what is the added value of installing both Celetask and Oxios memory (they have identical functionality)?
Click to expand...
Click to collapse
segoe,Oxios memory install to \Windows and Celetask to \Program Files
Hi Creative7419
Guess this will work on my SPV C500? (Typhoon) as well, right?!
Creative7419 said:
1 วันกับความพยายามครับ
**JoyStick 100%**
1.Add Animation
2.Font Original Segoe Condensed
3.Fix Start Menu
4.No MSN,No Office,No Regedit Bundle.
5.Backlight 3 Level
6.Etc.
Now..............................................
Thx. wm6_575_by_yourfei_qipilang
Modify delete nina.ttf and ninab.ttf and Add segoe.ttf,segoeb.ttf
1.Download WM6_575_EN.bin and install by mtty.
http://rapidshare.com/files/48767722/WM6_575_EN_by_MonkeyDay.bin.html
2.Change the "US English" option and Restart your phone.
Install integrate ENlang+T9+Celetask+Camera+Oxios Memory+Full Homescreen.****New Link Fix Album*****
OLD : http://rapidshare.com/files/49048724/t9_EnglishLangWM6FixAll.cab.html
NEW : http://rapidshare.com/files/49164963/t9_EnglishLangWM6FixAll.cab.html
**Before delete Start Menu close all program by Celetask press Camera buttom**
3.Delete "Start Menu" form \Windows\ and Copy new 'Start Menu' to \Windows\
http://rapidshare.com/files/48768479/Start_Menu.rar.html
4.Use ceregedt.exe to HKEY_CURRENT_USER\Software\Microsoft\Shell\StartMenu\Order
http://rapidshare.com/files/48769853/Regedit.rar.html
Delete all and copy.
Internet Explorer.lnk
Tasks.lnk
Windows Media.lnk
Carlenda.lnk
Messaging.lnk
Contacts.lnk
ActiveSync.lnk
Call History.lnk
Settings.lnk
App
Game
Picture.lnk
Replace and Restart your phone.
Enjoy.
************************************************************************************************
Click to expand...
Click to collapse
I don't think it is 100% ready. This is (more or less) the same ROM as referred to in the 'wm6.0 for feeler?' thread, and it is far from stable. I tried to install the 'integrate ENlang+T9+Celetask+Camera+Oxios Memory+Full Homescreen' CAB (the NEW version) and - bingo - my SDA couldn't find a network to register on, Calendar and Contacts do not work. Bottom-line, my SDA cannot be used this way.
Looking forward for a stable WM6 ROM for the Feeler.
can anyone please post a complete guide to do this. I dont want to ruin my feeler.
wirelezzwizzerd said:
I don't think it is 100% ready. This is (more or less) the same ROM as referred to in the 'wm6.0 for feeler?' thread, and it is far from stable. I tried to install the 'integrate ENlang+T9+Celetask+Camera+Oxios Memory+Full Homescreen' CAB (the NEW version) and - bingo - my SDA couldn't find a network to register on, Calendar and Contacts do not work. Bottom-line, my SDA cannot be used this way.
Looking forward for a stable WM6 ROM for the Feeler.
Click to expand...
Click to collapse
same observation here...
after using it yesterday and installing the "integrate ENlang+T9+Celetask+Camera+Oxios Memory+Full Homescreen" (old version), noticed that the camera app used is from the cooked wm5 (i like much the camera app of the orig chinese rom. much clearer. much faster. and has a 2x zoom)...
album.exe app is not running when clicked... so you need to use file explorer/smart explorer to open the images first...
if the backlight lits off when with some opened program/app, the only button you can use is the end key which when pressed turns your device to homescreen mode... and needed to press the back key to go back to that opened program/app...
i ended up reverting again to the chinese rom last night as i felt that it's a "more" stable...
just my 2-cents...
flywin said:
Hi Creative7419
Guess this will work on my SPV C500? (Typhoon) as well, right?!
Click to expand...
Click to collapse
Does it work with Typhoon please reply
neitin said:
Does it work with Typhoon please reply
Click to expand...
Click to collapse
I don't know
I have this problem too!
Should know Creative7419
Creative7419 It answer on our question!!!!!!!!!!!!
flywin said:
I don't know
I have this problem too!
Should know Creative7419
Creative7419 It answer on our question!!!!!!!!!!!!
Click to expand...
Click to collapse
i have Feeler and i'm not sure in Typhoon.
is there any guide in upgrading xphone2 wm5 - wm6 ?? and where can i download the wm6.bin?
thanks