Remove_UMTS_only(networkBand) - 8525, TyTN, MDA Vario II, JasJam General

Hello,
I was made a small mistake with my brand new mda VARIO II,
t-mobile Version.
I was proceed the the cab File: Remove_UMTS_only(networkBand)
In the Windows directory.
File was running, mda was doing something…
but I don’t know wht is now really happened and what will be the
result.
Who knows the function of this cab-File?
Could be possible to get a description of this File-Function?
Is there a way to redo this procedure, without a “HARDRESET” ?
For your help thank you in advance !!
Regards,
Gerhard

schaerg said:
Hello,
I was made a small mistake with my brand new mda VARIO II,
t-mobile Version.
I was proceed the the cab File: Remove_UMTS_only(networkBand)
In the Windows directory.
File was running, mda was doing something…
but I don’t know wht is now really happened and what will be the
result.
Who knows the function of this cab-File?
Could be possible to get a description of this File-Function?
Is there a way to redo this procedure, without a “HARDRESET” ?
For your help thank you in advance !!
Regards,
Gerhard
Click to expand...
Click to collapse
Shaerg
This will have no effect unless you had deliberately selected use UMTS only in the Phone settings screen.
You can check what network bands are in use on the phone by going to:
Start>settings>personal>phone>band. In the select your GSM/UMTS band drop down box you can choose which band(s) to use. The default setting is Auto.
Mike

Thanks!!
Hey, thanks’ for your support!!
I was check my settings: AUTO mode is still active and I can select
between:
- Auto
- GSM(900+1800)+UMTS(2100)
- GSM(1900+850)+UMTS(1900+850)
In the moment, the system is running without any bad effects…
Could you read German? I was just found an interesting Link to a
description for the different CAB files on the vario II
http://www.ppcwelt.info/community/showthread.php?t=97032
Regards, Gerhard

Related

How t remove T-Mobile colours from your device

So here is the procedure of getting rid of T-Mobile's customization:
The whole proccess means you will do a hard reset and you will be installing everything from the beggining! So if you don't want that to happen you have to stay with T-Mobile's customization!
Step 1
Hard reset your MDA Compact (power+soft reset). Do all the neccesary steps (choosing your country and timezone) and when you get in the screen that tells you to tap the screen in order to start working have your stylus at the soft-reset hole tap the screen with your finger and do a soft reset IMMMEDIAELY AFTER YOU TAP THE SCREEN!
Step 2
Your MDA compact will restart without any customization it will be a clean Windows Mobile 2003SE. With the file manager go to the Extended ROM folder that is now visible and install the following files:
Caller_ID_WWE_RC10.CAB
Camera_Patch_WWE_B15.sa.CAB
GPRSMonitor_WWE.sa.CAB
Java_10.1.2.57_WWE.CAB
MMS_2.0.0.13_WWE.CAB
MMS_Settings_WWE_NL.CAB (This file will install the settings of T-Mobile NL but if you don't install it and then change the settings to your providers settings most probably will end up with MMS that does not work. So install those settings and change them accordingly to your providers settings)
Patch_101123.sa.CAB
Version_WWE_101124.sa.CAB
Zip_Magician_T-Mobile_WWE_B12.CAB
Those are all the files you need to install. For those who need intellipad and intellidialer they will also have to install the 2 files for those programs.
http://www.compactjam.com/forum/forum_posts.asp?TID=53&PN=2&TPN=4
GPRS Settings
I did all the above!!
But now I can't use Internet Explorer anymore.
I don't have te right settings!!
I'm using a O2 card in the phone!!
Can someone help me???
Re: GPRS Settings
zanders77 said:
I did all the above!!
But now I can't use Internet Explorer anymore.
I don't have te right settings!!
I'm using a O2 card in the phone!!
Can someone help me???
Click to expand...
Click to collapse
Download the 02 settings from clubimate.
intellidialler does not work
I have a T-mobile MDA Compact in the UK.
If I follow these instructions it works fine - thanks. (SOme of the CAB files are UK versions or have later version numbers.
1. Is there a list anywhere of what each of these CAB files does?
2. The Dialler becomes crappy (formatting numbers in the US way, and not searching for contacts). The default microsoft colours are much more intuitive for showing missed calls/received calls etc in the recent calls list than the T-mobile palette, but i can't make the dialler search the address book in the very clever way it usually does. The intillidialler won't install either.
Any ideas?
Thanks,
Nigel.
Has anyone found decent versions of intellipad and intellidialler to install after doing the debrand on a UK Compact?
Quick question, i did all this and it worked fine for me, orange sim is working happily away when i unlocked the device via IMEI check and installed the orange rom but i've lost the clearvue products suite. I've looked in the extended rom partition but i can't find it
love this thing tho...still fiddling with it 2 months down the line
and how do i get the default microsoft colours?
27 said:
Caller_ID_WWE_RC10.CAB
Camera_Patch_WWE_B15.sa.CAB
GPRSMonitor_WWE.sa.CAB
Java_10.1.2.57_WWE.CAB
MMS_2.0.0.13_WWE.CAB
MMS_Settings_WWE_NL.CAB (This file will install the settings of T-Mobile NL but if you don't install it and then change the settings to your providers settings most probably will end up with MMS that does not work. So install those settings and change them accordingly to your providers settings)
Patch_101123.sa.CAB
Version_WWE_101124.sa.CAB
Zip_Magician_T-Mobile_WWE_B12.CAB
Those are all the files you need to install. For those who need intellipad and intellidialer they will also have to install the 2 files for those programs.
Click to expand...
Click to collapse
Can you tell me where can i find all those CAB's and intellipad and intellidialer CAB's. Please because I'm a new about this stuff :lol:

Installing other carrier/provider setting.

I have questions regarding this issue. I have Dutch T-Mobile MDA Compact (locked) and I soon to go back to my home country. I will not be able to use T-Mobile there, so I have to unlock it.
Unlocking is not an issue here because I can pay someone to do it (imei-check) or ask T-Mobile to provide unlock (hope they will!).
In my home country, I will register for a new carrier/provider (I still dont know which one).
I read in this forum that I need a .CAB file of the provider to be installed to get the phone setting (GPRS, mms, sms, etc.).
(1) Is that right?
(2) How to install that .CAB?
(3) If I install Provider1.CAB and then I switched back to Provider2.CAB, can I go back to Provider1 again?
Many thanks in advance to clear up this questions for me.
Regards,
gogol
Please, anyone can answer my questions ?
*begging*
(1) Is that right?
(2) How to install that .CAB?
(3) If I install Provider1.CAB and then I switched back to Provider2.CAB, can I go back to Provider1 again?
Click to expand...
Click to collapse
1. you can install the cab or do the settings manually that's up to you but using the cab file is much more easier.......
2. put the cab in your Magician and click on it......
3. the cab file is an installtion file meaning you will only use it once to install the settings...... to switch between them you can set it to auto pick the provider or maually choose ur provider from the connection settings.....
hope that helps
Thanks PapaDocta,
How to setup manually ? I have Dutch T-Mobile MDA Compact and I cant find any way to setup the GPRS. Could you please inform me which program or icon to do this ?
Thanks,
PapaDocta said:
(1) Is that right?
(2) How to install that .CAB?
(3) If I install Provider1.CAB and then I switched back to Provider2.CAB, can I go back to Provider1 again?
Click to expand...
Click to collapse
1. you can install the cab or do the settings manually that's up to you but using the cab file is much more easier.......
hope that helps
Click to expand...
Click to collapse

help please

i have completed a soft reset upon my mda compact,to remove the t-mobile(uk) rubbish
but now i have lost my msn messgenr and gprs settings
can anyone please help
thank you
You mean hard-reset & soft-reset to skip ext-rom from loading?
Go to the ext-rom & pick one off the cabs (in 1.13 UK probably cab-customization-magician-tmouk-03jun05.cab) that customizes your magician or go to the TMO web-site & get the settings there.
Cheers, M
ta mate
tmobile site was no use.
i duuno?? hope some with the same set up can just post up settings
for modem and grps,messnger
pleaseeeee
bump
You don't have the cab I mentioned? If you want it give me a pm, then I'll try to attach or upload the files.
Two months ago I just had delete all the UK stuff from my magician & now I'm almost uploading it. Very strange ....
Cheers, M
wow cheers mate
settings
If you go to the index of the xda forum,
You will find under networking all the cabs you require or I will attach the cab now, so saves you time. I am only attaching Tmobile cabs pay as you go and contact.
Saw that the complete 1.12.152 ext-rom is available at the ftp. That's the UK one & apparently the same as I got, sorry made a typo in my folder name. With this or the previous post by apple_power you should be able to solve your problems.
Cheers, M
thnak you very much for all your help,
sorry im new to all the pda world do i just add to mda via pc sync or do i need to copy and paste it to a certain folder
sorry guys but we all have to start someplace
thanks again with out your help my new kit wud be useless ta
Just copy the cab with act.sync to your device, anywhere is ok, & execute
succes, M
big thanks

Secure Pocket Phone project

Hi,
I send my first W2003SE application.
This is a free application (it's a beta version written in c#, and requires .NET CF) and is capable to detect a change in the phone owner identity via the next comprobations:
- The user can be configure a list of preferred SIM Cards
If the inserted SIM card is not any of the owner preferred sims the application send's a sms to a configured phone (including a configured text and the SIM identifier of the inserted card)
[Obviously, the application sends the message without prompt for user msessage send confirmation and not stores the sms at the outlook tray's]
[obviously, if the new user inserted sim is a prepay sim and the credit was 0, none sms is sended]
Additionally, the application show's (if configured) a balloon notification.
- The application test (if configured) the value of the Owner identity and if changed sends a sms and / or shows a notification...
Please, test and send me your comments...
regards
Also tested it for WM05?
Nadavi :?:
Hi, sounds similar to another program on this forum. What happens if the user performs a hard reset? In any event I will give it a go soon.
frigit said:
Hi, sounds similar to another program on this forum. What happens if the user performs a hard reset? In any event I will give it a go soon.
Click to expand...
Click to collapse
hello,
1) i have showed 2 threads in this forum about this problem.
one works with owner data but no with sim data, and another works with the sim, but the user is obly to store a special number at the sim ownered numbers list (i don't have tested any).
this application works with owner user data and stores the valid sim identifiers in a configuration file.
2) in my opinion, the correct usage is:
a) install the application
b) c9nfigure settings
c) copy the application and the configuration file at the rom
in this case, a hard reset is not a problem, ok ?
regards
frigit said:
Also tested it for WM05?
Click to expand...
Click to collapse
sorry,
i have a qtek s100 with w2003se...
please, test in w2005 if you have... and send me your comments...
thank's
Seems to be working on my xda2i - no slow down of unit and no lock-ups tho only second day of use.
Thank you Bartito
Sorry but doesn't work on my MDA Vario.
First I had to install OpenNet Cab and after that I got an error that it couldn't load some NotifyIcon.
I was in a hurry so I didn't check that good, I already uninstalled the program but I will sure will try a new update, the idea is real good
bartito said:
frigit said:
Hi, sounds similar to another program on this forum. What happens if the user performs a hard reset? In any event I will give it a go soon.
Click to expand...
Click to collapse
hello,
1) i have showed 2 threads in this forum about this problem.
one works with owner data but no with sim data, and another works with the sim, but the user is obly to store a special number at the sim ownered numbers list (i don't have tested any).
this application works with owner user data and stores the valid sim identifiers in a configuration file.
2) in my opinion, the correct usage is:
a) install the application
b) c9nfigure settings
c) copy the application and the configuration file at the rom
in this case, a hard reset is not a problem, ok ?
regards
Click to expand...
Click to collapse
Bartitio, could you please clarify what is required in point (c)? Where exactly do I copy the files too? I also have a Magician. Thanks Paul
c) copy the application and the configuration file at the rom
in this case, a hard reset is not a problem, ok ?
regards[/quote]
Bartitio, could you please clarify what is required in point (c)? Where exactly do I copy the files too? I also have a Magician. Thanks Paul[/quote]
Hi,
I have read more threads in this forum about the mode to make your owner rom.
Tried the software but got the following error:
"An unexpected error has occurred in SecurePocketPhone.exe
Select Quit and then restart the program, or select Details for more information"
Upon selecting details the following error message occurs:
"SecurePocketPhone.exe
TypeLoadException
Could not load type
OpenNETCF.windows.forms.notifyicon
from assembley
OpenNETCF.Windows.Forms,
Version=1.4.50804.0, Culture=neutral,
Publickey Token=30C767B29D52D6
Any ideas?? I have the opennetcf file loaded
frigit said:
Tried the software but got the following error:
"An unexpected error has occurred in SecurePocketPhone.exe
Select Quit and then restart the program, or select Details for more information"
Upon selecting details the following error message occurs:
"SecurePocketPhone.exe
TypeLoadException
Could not load type
OpenNETCF.windows.forms.notifyicon
from assembley
OpenNETCF.Windows.Forms,
Version=1.4.50804.0, Culture=neutral,
Publickey Token=30C767B29D52D6
Any ideas?? I have the opennetcf file loaded
Click to expand...
Click to collapse
I have updated the cab file with a newly version that don't need the OpenNetCF.NotifyIcon class.
Thank's
bartito said:
I have updated the cab file with a newly version that don't need the OpenNetCF.NotifyIcon class.
Click to expand...
Click to collapse
Sorry, but this doesn't work on my MDA Vario with latest Qtek Rom and OpenNET CF installed.
But maybe my problem is that I use WM5 and not WM2003
molski said:
bartito said:
I have updated the cab file with a newly version that don't need the OpenNetCF.NotifyIcon class.
Click to expand...
Click to collapse
Sorry, but this doesn't work on my MDA Vario with latest Qtek Rom and OpenNET CF installed.
But maybe my problem is that I use WM5 and not WM2003
Click to expand...
Click to collapse
Ahhh!
It's possible.
I have tested only in w2003se.
I don't have a w2005 pocket...
sorry
That's too bad....for now!
I will stay and follow this topic, would love to see this work on my Wizard.
By the way, does it stay freeware, or are you planning something like a license key, or maybe something like a free donation?
molski said:
By the way, does it stay freeware, or are you planning something like a license key, or maybe something like a free donation?
Click to expand...
Click to collapse
This project was freeware for every...
Hi Bartito, not sure if you updated your first attachment, but I downloaded it again and got the same error.
frigit said:
Hi Bartito, not sure if you updated your first attachment, but I downloaded it again and got the same error.
Click to expand...
Click to collapse
Please,
install the OpenNET CF assembly libraries (follow this link: http://www.opennetcf.org/fget.asp?file=SDF14CABs.zip&dir=/bin)
Thanks
Hi Bartito!
Thank you soooooo much for this App!
I had the same problems as frigit with the same error-message and I thought I had the right .NET CF but it didn't work. Now it is workign perfectly. Thanx for the link!
Bartito for President!!!
inquartata said:
Bartito for President!!!
Click to expand...
Click to collapse
No, no... i idore my anonymity.
please, send me any comment or bug.
thank's
inquartata said:
Hi Bartito!
Thank you soooooo much for this App!
I had the same problems as frigit with the same error-message and I thought I had the right .NET CF but it didn't work. Now it is workign perfectly. Thanx for the link!
Click to expand...
Click to collapse
Do you have a Wizard (with WM5), or some device with WM2003?
Tnx!

HIDE / SHOW ExtROM on HTC TyTN (Registry Tweak)

Hide/Show Hidden ROM (at least works on my TyTN - German ROM)
SHOWN:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\EXT_FLASHDRV] "Bootphase"=dword:00000002
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\EXT_FLASHDRV] "MountHidden"=dword:00000000
HIDDEN:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\EXT_FLASHDRV] "Bootphase"=dword:00000001
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\EXT_FLASHDRV] "MountHidden"=dword:00000001
For me this was the default:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\EXT_FLASHDRV] "Bootphase"=dword:00000002
So, I only had to change this from 1 to 0:
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\EXT_FLASHDRV] "MountHidden"=dword:00000000
Now I can see the extended rom, my device is an HTC TyTN WWE, I will post the ExtROM to FTP in a while.
I also have updated the wiki page with your hack:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unhide_Extrom
Thanks!
pof said:
I also have updated the wiki page with your hack:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unhide_Extrom
Thanks!
Click to expand...
Click to collapse
GREAT !
Now we still need 2 very important Registry Hacks (or missing links to get them work):
1. A hack for presenting a differentiation between GPRS/EDGE and UMTS/HSDPA
2. A hack for invoking the EngineeringTest Mode
I've been unable so far to get that working on the Hermes platform. Keep trying.
pof said:
I also have updated the wiki page with your hack:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unhide_Extrom
Thanks!
Click to expand...
Click to collapse
GREAT !
Now we still need 2 very important Registry Hacks (or missing links to get them work):
1. A hack for presenting a differentiation between GPRS/EDGE and UMTS/HSDPA
2. A hack for invoking the EngineeringTest Mode
I've been unable so far to get that working on the Hermes platform. Keep trying.
pof said:
Now I can see the extended rom, my device is an HTC TyTN WWE, I will post the ExtROM to FTP in a while.
Click to expand...
Click to collapse
Thank you.
I finished uploading my ExtROM, I also created a wiki page with the contents of all the available Extended ROMs on FTP so far:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtendedRoms
If anyone has a different version not listed, please do the following:
1) Unhide it
2) Zip it
3) Upload it
4) Update the wiki page
Thanks!
pof said:
I finished uploading my ExtROM, I also created a wiki page with the contents of all the available Extended ROMs on FTP so far:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtendedRoms
If anyone has a different version not listed, please do the following:
1) Unhide it
2) Zip it
3) Upload it
4) Update the wiki page
Thanks!
Click to expand...
Click to collapse
Heh, youre busy one.
I added a registry tweak to change the titlebar clock to an annalog one, if someone is interested.
Hopefully we can keep the wiki growing and useful.
My default setup was also:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\EXT_FLASHDRV] "Bootphase"=dword:00000002
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\EXT_FLASHDRV] "MountHidden"=dword:00000001
So I just changed to:
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\EXT_FLASHDRV] "MountHidden"=dword:00000000
and did a soft reset. The extended rom then appeared but it was still write protected. How do I get rid of the write protection?
LJ
Use the cab file in the wiki, it unlocks and unhides ExtROM.
After using the cab fille and/or making the tweaks myself, and the are the same as described as above, the result is that I can see the ext. rom, but it is still write protected. I can't delete any file or write a file to the ext. rom. I've got a Tytn WWE. What is the problem, or better: what is the solution???
Should be wrtitable using this cab:
ftp://xda:[email protected]/Hermes/Tools_and_Programs/HERMES_MountExtROM.CAB
If it's not, then try to hard reset and then use the cab without messing with registry keys before.
Problem with Extended ROM
I have tried all the methods in the wiki and also all the reg. edit trick but I still can't see my extended ROM. When I run the cab to Mount Extended ROM it crashes my TyTN. Locks it up befor making it to the windows screen. Does anyone have any ideas how to fix this or tell me where to look? I was going to mess around with bootloader but I am not that computer savy.
hard reset and install the unhider&unlcoker cab file. it should work after hard reset.
Have tried to Hard Reset my Taiwanese CHT9000 and only apply the HERMES_MountExtROM.CAB tweak, now can see the Extend ROM, but still cannot "unprotect" the ROM. Cannot make it writable. Any other methods? Like modifying the registry? Thanks a lot in advance!!
ghl10000 said:
pof said:
I also have updated the wiki page with your hack:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unhide_Extrom
Thanks!
Click to expand...
Click to collapse
GREAT !
Now we still need 2 very important Registry Hacks (or missing links to get them work):
1. A hack for presenting a differentiation between GPRS/EDGE and UMTS/HSDPA
2. A hack for invoking the EngineeringTest Mode
I've been unable so far to get that working on the Hermes platform. Keep trying.
Click to expand...
Click to collapse
On my Vario 2, when I'm using 3G (and therefore, HSDPA) the [3G] icon is shown in the top bar (and when it connects a small connecting icon with the moving arrows and 3G in it is diplayed, next to the square 3G indicator) - when it drops back to GPRS, it just changes to [G].
Does yours not do this?
rcyh said:
Have tried to Hard Reset my Taiwanese CHT9000 and only apply the HERMES_MountExtROM.CAB tweak, now can see the Extend ROM, but still cannot "unprotect" the ROM. Cannot make it writable. Any other methods? Like modifying the registry? Thanks a lot in advance!!
Click to expand...
Click to collapse
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=453&PN=1
Unsure whether it works myself, as I've not tried it yet, but I'd put (a small amount of) money on it that it works
Hi Chris, Thanks for your reply!!
Unfortunately, my device is still un-protectable after following the whole process. And the registry settings I have checked are exactly the same as the described. The Extended_ROM directory is still write-protected. Couldn't add or delete files in it.
Maybe I am the unlucky one that couldn't change the extended ROM at all...
Since the digital signature security autentification for CABs in ExtROM is on by default, putting in any CAB file that is either not digitally signed, or loses its authenticity because it was modified will not be installed during the Customization phase after a hard reset.
Any ideas how to solve this problen on TyTN?
There was the soluton for the Universal devices wiht the Default_Signed_DisabledSecurity.CAB. This CAB has the right signature for Universal, but it dosn’t work on TyTN.
From this MSDN discussion about Windows Mobile 5 code signing,
"Looks like you won't have to sign the cab if wceload.exe isn't used to install it. Although if it is used to install the cab file you will need to sign it."
Click to expand...
Click to collapse
http://blogs.msdn.com/windowsmobile/archive/2005/12/17/security_model_faq.aspx#506035
A possible gap? If someone could come up with a third party CAB installer that could be used during customisation, maybe it could bypass the official CAB installation procedure (and therefore the signed certificate verification) entirely? Just a thought.
For Universal this problem i think was decided here (http://forum.xda-developers.com/viewtopic.php?t=33638&postdays=0&postorder=asc&start=150) with the help of Default_Signed_DisableSecurity.CAB. But this CAB not work on my TyTN. I think it because of wrong digital sign.

Categories

Resources