Bluetooth XDA2S - Windows Mobile Development and Hacking General

I have just got a new XDA2S and can't get bluetooth to work with other phones.
On XDA2 you could click on file and beam it. Via IR or bluetooth.
I can recive files on bluetooth but not send them.
Think it might be to do with not finding other services on other devices.
Can anyone help or know settings to change.
Not sure if it just the settings;
Authorization required.
Authorization (passkey) required.
Encryption required
and also what services this need to be enabled on.
If anyone has been able to send files to another phone can you please list your settings.
Thanks
Tim

Tim,
I received my XDA2s yesterday. My 15yr old son tested bluetooth by transferring a 4Mb song from my XDA2s storage card onto his Samsung phone via bluetooth without any problems. It took just a couple of minutes.
We had to tick "Allow other devices to connect" (All devices) and "Other devices can discover me" on the Accessibility tab of the Bluetooth settings screens. We also had to provide the same 4 digit code to both devices.
On the Services tab, the settings;
Authorization required.
Authorization (passkey) required.
Encryption required
are all unticked on my device.
Phil

Thanks
Still having problems. My xda2s does not seem to see other bluetooth devices. I am able to receive files over bluetooth. Just cant send anything using beam. Found i can send contacts if i use "send via bluetooth". but it i use beam it only find ir devices.
Can any one help or am i alone!!!!

Related

Problems recieving data over bluetooth!!! PLS HELP!!

Hi !!
I have just bought a O2 XDA mini and for some reason it just doesnt recieve data from other devices over bluetooth!
i can send ( i am paired correctly!!) data !! but cant recieve data!! the sending bluetooth device always says send failed ... or recieving bluetooth device ( i.e. my xda) is not responding!!!!
i am really getting :evil:
anyways i would realy appreciate some help!
i wonder if its something to do with the damn ports!!!
Same problems here. I have tried with Ipaq2210, SEk700i, Nok6230, Samsung600 all paired up ok but file transfer is never a discovered avilable service.
Sending fails whether initiated on wizard or other devices. I believe it is down to the Microsft bluetooth stack as the Ipaq uses widcomm stack and works with all the above phones.
I'm hoping someone will find a reg hack to improve the functionality.
What with no wifi activesync my recent upgrade from Ipaq and K700 to wizard is leaving me feeling cheated.
Al
go to start>settings>connections>beam, and make sure you tick the "receive all incoming beams" option.
i had this problem before and i couldn't recedive any file through bt, but when i checked this i receive anything now, and it shows the "file transfer" profile when i initiate the pairing from another device.
i hope this works for you guys.
cheers.

Registry hack to enable activesync on BT

Would anybody know what registry entry I need to enable activesync over Bluetooth. Some time ago everything worked ok but I lost the capability (someone removed the dongle and reinserted), activesync is no longer listed as a service my PC provides, although it has done and still should do it. the services per device are listed in the registry, but I cannot figure out what I precisely need to do to get the activesync service in the device list.
emay said:
Would anybody know what registry entry I need to enable activesync over Bluetooth. Some time ago everything worked ok but I lost the capability (someone removed the dongle and reinserted), activesync is no longer listed as a service my PC provides, although it has done and still should do it. the services per device are listed in the registry, but I cannot figure out what I precisely need to do to get the activesync service in the device list.
Click to expand...
Click to collapse
Would you mind mind to set a question mark?
you shouldnt need to do any registry changes. start by deleting the profile on the phone and on the pc so you can start fresh. then in the bluetooth control panel on the pc, add an incoming port and set activesync to accept connections on this port also. now use the phone to find the pc and activesync will show up on the list of services. run activesync on the phone and choose sync via bluetooth in the menu to establish a connection.
Thanks, this worked like a charm.

bluetooth issue

hi guys, i've got an issue with my bluetooth in that i can't receive files, i've tried from 2 different computers and a phone with no success. my windows box gives me an obex error code 0x49 if thats any help to anyone. i've got accept transfers ticked and the devices are paired. i can send files from the phone fine so the bluetooth is defiantly working.
Turn beam on.
Receive all incoming beams.
could you clarify a bit? i've got accept all connections turned on and don't see any beam options in the bluetooth app?
In sense settings, go to all settings. (Right softkey).
Open the bluetooth settings and open the 1st tab.
Expand the advanced settings.
Open the file transfer config and click allow "incoming file transfer connections"
I've not tested it though
I reconfigured the comm manager to run this app, called BtManager.exe. More useful than the wizard it normally runs.
i've already done all that, everything is enabled in the bluetooth settings app i just can't receive files, as i said before i can send to devices and connect via a2dp so i don't think it's a hardware issue so there must be a software problem somewhere?
Tung_meister said:
hi guys, i've got an issue with my bluetooth in that i can't receive files, i've tried from 2 different computers and a phone with no success. my windows box gives me an obex error code 0x49 if thats any help to anyone. i've got accept transfers ticked and the devices are paired. i can send files from the phone fine so the bluetooth is defiantly working.
Click to expand...
Click to collapse
same here, any one experienced it and solved the problem?
Long time no reply on this thread. I fixed the problem for my HD2. Maybe it help poeple to fix their receive files for their HD2 too.
In bluetooth advanced settings go to file transfer and uncheck safe files on your sd card, instead set the path to your sd card for receiving files. Click finish and test.
Thanks Guido, that worked for me!

No file transfer via bluetooth... wtf?

Hey folks,
for some reason my HD2 isn't able to send files via bluetooth anymore.
I can receive files from another device but cannot send them.
Anyone facing the same problem?
Solution?
Thanks
Well...
Be mindful of the carrier your trying to send to. If your trying to send to a CDMA friend(especially music files)it may not go through because of the carrier restrictions. Also thoroughly check your bluetooth settings/Beam settings and your authentication system. Also try pairing.

Bluetooth Security

Hi,
can someone tell me about bluetooth security.Yesterday i was taking some files via bluetooth.i saw that he was sending them without passcode.How to enable passcode in WM.And when i send him a file then it asked me to enter passcode.I want that type of security.And when i connected with him,his device saw some notifications that some profiles were activated(he told that he saw that only on my device).And then there was remote control option on his device.When he activated it,he was controlling my GENE.Plz help me to disable them.
Is that not possible??Then what about my privacy??

Categories

Resources