Which is the way 2 restore u'r phone from dead
dead:
No power - Power bottun dont work - Softw reset Dont work - when presing the battery bottun only the light for the green & red phone lights up - when conected to the computer say it usb device not reconized.
I 1/2 2 sd cards, card reader/writer, usb wire conector, serial prot conector, & cradel could some one please help me.
thanks in advance
:?
Related
My magician wont turn on at all, the screen is blank. i tried to hard reset and soft reset but it doesnt do anything but make a click sound. when i put the use connector into the phone it come up wit a red light but ive left it on charge all night! can someone pleaseeeeeeeeeeeeeeeeee help me
Does it enter into the bootloader mode?? ( when u press the reset power and camera button at the same time) if it does that then u can just reflash it without any problem
oh in this mode the screen light wil not be on so the screen wil say serial or USB (if u connected it to ur comp by the USB cable) but it wil be kinda hard to see
mine did the same last week,just made a clicking sound when you try to turn it on.
fixed mine by buying a new battery.the pda cant boot up with a dead battery even if its connected to the charger.
HI everybody, first i am from germany so excuse my english
i have a Herm 300 that belongs to a friend of mine, he just bricked his phone during a flash procedure.
It shows the same as in point 4 described here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
so i did that MTTY thing and after the reboot on the screen appears something like:
+
if u want to rest all date press QWERTY (R) for YES
and QWERTY (dunno that letteranymore) for no
so i pressed R for YEs and softresetted with stylus.
Now i cannot turn that device on, no led lids up nothing!
so i put the battery out an plugged in the chgarger cable
et voilá a red led lits up on the right corner.
i cannot turn the device on and when i put the battery back, the red led tunrs off.
Is here someone who can help me?
thanks!
Linus02
If you can get your hands on another battery then try that as the led lights up meaning that the hardware is still working. Battery could be bung...
Cheers...
but with a charger cable plugged in, it mustbe possible to start up the device or?
When i turn out battery from my 'HTc Touch and plug in charger, i can start the device but not the herm?
greets
Linus02
You can't start the Hermes without a good battery installed....
Hi
I have a M600 and i can not start anything.
When i plug it in the USB of my laptop, the light for the battery charging is not even powering!
I tried the boot mode from the Wiki (Hold Communication and Press reset) but it doesnt do anything. The screen not showing anything!
What should i do?
Nic
i got a unrooted mt4G that
-when connecting via USB/Charger, doesnt charge (no light top left),
-computer doesnt recognize tflash or phone
-dim red light in keypad goes on
-power button does nothing (screen doesnt come on)
-power and low vol key also does nothing
-water indicators in the batt compartment are white.
-condition of phone is 9.5/10 (there are no knick marks anywhere, screen isnt cracked)
i have no idea what my friend did to it but i am sure it was stock.
is there anything that can be done?
Let's start with simple things first:
Maybe your charger unit is shot?
Try a different micro USB charger, at least if you see the amber light @ top left of the phone you know it's your charger. If not, try this:
Pull the battery, sim card and micro SD card out of the phone.
Make sure there is no charge cable connected to it.
Now hold the power button for about 5 seconds.
Put it all together, see if the phone is charging from the power - if so, attempt to reboot after a few minutes of charge, with charge cable in
Symptoms:
Phone wont charge (nor will it show charging - no lightning bolt)
Phone wont connect to computer USB.
If I connect the USB (to either a computer or a charger) the phone just pulses the vibration every 2 sec or so... and does not show the battery progress... just black screen.
As long as the phone has a fresh battery, it functions normally otherwise.
What its NOT:
The cable - tried many cables.
The charger - tried different samsung chargers...
The comptuer - tried more than one
The usb connector in the phone - nope.. not that either. When in ODIN mode, the phone stays on when I remove the battery... thus.. the USB connector is passing power.
The power button - The phone starts normally via the power button. It shuts down properly with the power button. The power button performs wakeup, etc all normally.
The battery - I have two Note 4's. I swap the battery, and the problem remains on the one phone.
Steps I have done:
I wiped the cache partition first... no change.
I did a full factory reset... no change.
I need some answers. I have run out of ideas. I'm not taking this to sprint. It will take an hour to explain to them what I've already done, and they will want to do expensive things that I bet will not fix it.
Rod
martinav said:
Symptoms:
Phone wont charge (nor will it show charging - no lightning bolt)
Phone wont connect to computer USB.
If I connect the USB (to either a computer or a charger) the phone just pulses the vibration every 2 sec or so... and does not show the battery progress... just black screen.
As long as the phone has a fresh battery, it functions normally otherwise.
What its NOT:
The cable - tried many cables.
The charger - tried different samsung chargers...
The comptuer - tried more than one
The usb connector in the phone - nope.. not that either. When in ODIN mode, the phone stays on when I remove the battery... thus.. the USB connector is passing power.
The power button - The phone starts normally via the power button. It shuts down properly with the power button. The power button performs wakeup, etc all normally.
The battery - I have two Note 4's. I swap the battery, and the problem remains on the one phone.
Steps I have done:
I wiped the cache partition first... no change.
I did a full factory reset... no change.
I need some answers. I have run out of ideas. I'm not taking this to sprint. It will take an hour to explain to them what I've already done, and they will want to do expensive things that I bet will not fix it.
Rod
Click to expand...
Click to collapse
It seems that the micro USB connector on the phone is broken.
Note 4 is using 11 pin microUSB not the ordinary 5 pin.
You can still have power but very minimum wattage if 1 or several pins are broken, that's why in ODIN mode it still ON without battery as ODIN mode requires minimum power.
Try changing the micro USB connector on the phone (not the cable)