Related
The current version 1.60 of the ROM includes already a virtual serial port but unfortunately it is a dynamic port, which is not visible to many applications. Also the ActiveSync support is difficult and complicated to use and if you want to synchronize with different computers you have always to couple the device again.
For future releases I plan the following improvements:
Support for Bluetooth headsets
Support for Bluetooth network access points
Send contacts and files through Bluetooth
http://www.angeltowns.com/town/bluetooth/
i am looking also for handsfree bluetooth support if any help on that
Yeah, headset works fine, it's the handsfree profile we need, that's the one adding enhanced features....
Do you know why some headsets work better than others? I understand that the profile does not work and therefore you can not use the functions on the headsets, but I'm curious if your recent fix will help headsets such as the Jabra BT250 communicate better with the device. The HBH-65 has no issues, but Jabra does note, often very slow to connect. I like the Jabra because I can hear better-age you know.
gratefuled said:
Do you know why some headsets work better than others?
Click to expand...
Click to collapse
Maybe because of the headsets itself ? I bought a HBH-35 and can do [/quote]anything with it, walk out of range and back, turn it off and on, reset the MDA, chanrge the headset etc etc. without having to re-pair...
I understand that the profile does not work and therefore you can not use the functions on the headsets, but I'm curious if your recent fix will help headsets such as the Jabra BT250 communicate better with the device. The HBH-65 has no issues, but Jabra does note, often very slow to connect. I like the Jabra because I can hear better-age you know.
Click to expand...
Click to collapse
What headset-functions do you mean ? Caller ID ? Voicedial etc. ?
That's not in the headsetprofile, that's in the handsfree profile. the headsets with enhanced functions use the handsfreeprofile also, nut just the headsetprofile...
downloaded and installed 1.0.1.2 fantastic my new bt gps works! However I can not use my gps and hbh-65 headset at the same time, any ideas please
Simply stated I was wondering if the new blutooth fix might help the Jabra BT250 work better. I know other headsets work without issue, but Jabra seems to have some problems, and I doubt that this is a Jabra problem, I believe it is a BT Device profile issue.
Can I have another link to the software cause the link is blocked from my ISP, or can any body upload it here or any other palce...
Best regards,,,
I have a new HBH-200, it works ok to answer a call but all the other features are not working, such as caller number etc.
Like i said; It's not i the headsetprofile. The headsetprofile doesn't do much except making a wireless headset possible. Answer, dosconnect and talk and listen, that's all...
Everyting else is in the handsfreeprofile (handsfree is used for advanced options for headsets and carkits)...
Link down????? :?:
not for me
Handfree Profile
I have 2 phones, XDA II and a Nokia 8910i.
My bluetooth Headset is the Ericsson HBH65.
To my surprise, I have paired the HBH65 with both phones and I am able to receive calls from both phones (not at the same time of course) without any problems. Whichever phone rings first get the use of the HBH65. In conflicts however, the Nokia seems to have priority over the XDAII, which is fine with me, but I am so happy that it actually works.
As others are mentioning, I am really missing the enhanced functions of the Handsfree Profile. Can anyone suggest any solution or perhaps work on resolving this issue as a lot of people are waiting for this. I was aware that Towas was planning to release a new version to his BT Stack Fix, has he got anywhere with that by any chance? or anyone else?
I have only had my XDA 2 for a week and I can’t get my Motorola 810 head set to work. The XDA finds it and tells me that it is compatible with headset profiles but it doesn't seem to work. Can anyone advise me?
Thanks
Andy
Have you followed the procedure for pairing the device,ie: place xda in discover mode, when it finds the headset, tap then enter code for pairing, once paired switch bluetooth to on, then make sure you have bluetooth headset turned on from the main/today screen.
I seem to have problems with my bluetooth headset every once in a while also. I have a HBH65. On ocassion, the connection doesn't seem to be working even though headset is enabled and they are paired. I've found that if I soft reset the XDA2, that the bluetooth headset will work again.
Have you installed towas bluetooth tools patch, this fixes a lot of problems with bonding and alos makes things work where they couldnt before. I was told that the latest rom release here in UK was going to address all these problems too but I havent got around to upgrading yet, I hope it supports full headset profiles so I can originate calls from the headset as well as answering the call.
I have downloaded the new Rom update and it seems no different. I have tried a soft reset and this did not improve the situation.
I know the headset works fine as I use it with my nokia handset with no problem.
Has anyone got a Motorola 810 that works ok on the XDA ?
cruisin-thru said:
Have you installed towas bluetooth tools patch, this fixes a lot of problems with bonding and alos makes things work where they couldnt before. I was told that the latest rom release here in UK was going to address all these problems too but I havent got around to upgrading yet, I hope it supports full headset profiles so I can originate calls from the headset as well as answering the call.
Click to expand...
Click to collapse
did the bluetooth tools patch support voice dial from bluetooth headset? if not did anyone know the new rom from O2 works with this function? thanks!
Andy, no it doesnt support originate call from headset but it did allow lots of different gps and headsets to work, the headsets work for answer call/drop call only as far as I know, in the notes for the xda2 upgrade it mentions the headset profile but I dont know if anybody has hot the headset facility to work yet, I havent upgraded yet so I am yet to test it.
I have installed the new ROM and as far as I can see it does nothing for Bluetooth beyond fixing some compatibility issues on some headsets. It still only allows one headset profile (so if you have a headset and a handsfree kit as I do you need to delete bonded pairs when you change devices - now there's intelligent functionality!!). No headset dialing so still not a complete BT headset implementation. No handsfree support.
Anyone else think that the XDAII is a great PDA but about the worst apology for a GSM phone in the last 10 years?
If anyone can point me to a decent set of BT tools to add on let me know.
Not really.
I fully agree the XDAII is a poor phone, with the best agenda and contact list available, but that is!
I wonder if Phone-pda makers are really going the so called "convergence" way.
To date, and after many different PDA/phone/PDA-Phone devices I've tried, no one is even close to the mark.
Something so "simple" such as merging an OLD Ericsson (or Sony-Ericsson) T-68 phone abilities, with just a PPC 2002 (yes, not even 2003) PDA, should produce a combo, no machine on the market is even close to.
IT'S SO DIFFICULT?
:evil: :evil:
Hey guys. I have an XDA II and the Motorola Bluetooth headset. I gave up trying to use the headset before the updated XDA II ROM as it was very temperamental to say the least. Now I have updated the ROM its much better but I still have problems. If I am dialling out and put the headset on first then its fine, transfers to the headset etc. If I am wearing the headset and then take a call its fine, transfers to headset etc. But if I am not wearing the headset, say it’s in its case and the arm is closed then I get a call, I open the arm and stick the headset on and answer a call and nothing. Wont transfer to headset and I need to use the phone. Not good when driving! Is this still a XDA II problem? Have I set it up wrong or is the headset not working right? Bascially I need to have the arm open on the headset at all times for it to work like it should (like it did on my T68i) and its very annoying? Any ideas?
This is the headset http://www.motorola.com/mdirect/software/ss_html_docs/bluetooth/bluetooth_headset_info.pdf
Thanks in advance
Have you installed bluetooth tools? Unbond your headset then rebond after installing bluetooth tools.
What the best place to get the bluetooth tools from? Sorry if this has already been asked. And are they free??
Thanks
Yeah I did try bluetooth tools but it did not seem to make any difference maybe its just my headset, it was like one of the first Bluetooth headsets out :? I dunno...
You can get Bluetooth tools from...http://www.angeltowns.com/town/bluetooth/
And it seems to be free
Thanks for that.
However, I could not find the settings button, Just a display on the screen. What are the 1 & 2 buttons for??
:?
Yeah the only changes you see are when adding new devices like headsets etc as far as I know. I thought the same as you, went through all the options looking for it hehe. Those two things on the screen are something to do with selecting different settings for bluetooth to conserve battery like always on or auto off. I am not too sure as I removed it when it did not fix my problem!
Yeah, I removed it too. It caused me all sorts of problems with connecting my bluetooth jabra bt200!
Does anyone tried to connect the XDAII with the new HP BT stereo heaphones with XDAII?
I have this HP device but can not install it.
Bummer..
Widcomm BT Stack on XDAII...
HP BT stereo headphones does work with XDAII (myself and few friends have been using it for a while now). You will need to install Widcomm BT stack (1.0.0.3500 or 1.5.0.2000, or the one that have High Quality Audio Profile) though.
However, you will loose Bluetooth Headset profile if you install Widcomm BT Stack. Apparently BT headset does not work with Widcomm stack on XDAII yet. I've managed to get the headset detects incoming calls, take calls, but still no sound coming out from the headset yet. Still trying...
Interesting. Will check it out and reply.
This is my experience using a HP bluetooth stereo headphone bonded with an O2 xdaII. I use Wincom 1.5 Build 2000 from "dtktvu". So far the setup has worked very well. After having used the setup for three weeks, my impression is as follows:
1. Connection with headset is very stable
2. Stereo sound is clear, quality is quite superb really.
3. So far this setup works only for music, it does not work together with bluetooth headsets (if you happen to have one). This means that you can not use your headset at all while using the headphone.
4. The only inconvenience is that if there is an incoming call during song playback, the music pauses but there is not any other audio warning. On the screen you do get a warning that there is an incoming call, though. So in my case, while I listen to music, if I hear a sudden pause then I know that there is an incoming call and act accordingly. Now, let us come to the next point....
5. You have to use Windows Media Player as the player for point 4 to happen. I am not sure how the setup will react to incoming calls with other players such as Winamp, GS Player etc..
6. Battery life is quite good. I get about 6-7 hours of playtime from the headphone.
Now, if only someone will update this Wincom Driver further so that it can work together with bluetooth headsets, then we will have the best of both worlds... Maybe donations from potential users to provide incentive to some expert out there.
Widcomm BT Stack - Get it here
http://forum.xda-developers.com/viewtopic.php?t=11729&postdays=0&postorder=asc&start=50
You may need this key as well
[HKEY_LOCAL_MACHINE\Services\BTIcon]
"Dll"=""
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Transports\BuiltIn\3]
"driver"=""
Thank you to dtktvu
Widcom on XDA II without Windows Mobile SE?
I would also like to use the HP bluetooth headset. I have a XDA II (not IIs). Will the Widdcom stack install on this? I am currently not running Windows Mobile SE.
Many thanks.
keys
where do we copy and paste those keys? do you think this could work with the Magician?
khanh_xda said:
4. The only inconvenience is that if there is an incoming call during song playback, the music pauses but there is not any other audio warning. On the screen you do get a warning that there is an incoming call, though. So in my case, while I listen to music, if I hear a sudden pause then I know that there is an incoming call and act accordingly. Now, let us come to the next point....
Click to expand...
Click to collapse
Try MS VoiceCommand - in new 1.5 version there is incoming call voice notyfication (normal ring goes at half of the sound level and voice engine reads callers ID) maybe it will go through UR headset.
[/quote]
Try MS VoiceCommand - in new 1.5 version there is incoming call voice notyfication (normal ring goes at half of the sound level and voice engine reads callers ID) maybe it will go through UR headset.[/quote]
Thanks for the pointer, didn't work though.
Would welcome any other ideas.
Will this work on XdA2JoJo.v3.2zS version that has broadcom 3900? I'm planning in getting one.
Need advise...
Thanks
HP BT stereo headphones with XDAIIi
Hi,
I've read the thread but cannot see any indication of someone using an XDA IIi and the HP BT stereo headphones. Anyone know anything about this particular combination? So far I know the software that comes with the HP BT stereo headphones will not install on the XDA. And without the BT high quality audio profile installed I cannot get past pairing the devices. Any ideas?
Thanks,
R
Re: HP BT stereo headphones with XDAIIi
rodrigol said:
Anyone know anything about this particular combination?
Click to expand...
Click to collapse
I am using this combination.
I have HP iPaq BT stereo headset and O2 XDA IIi.
Just did the following.
0 Full backup!
1 Uninstall a GPS software that was using BT Serial Port (GPS tuner, OziExplorer, Russa)
2 Uninstall BT Tools
3 Remove all paired devices
4 Soft reset
6 Install Attached file (warning: with this patch you will not be able to use a HandsFree BT, so if you do not really mind, then continue).
7 Soft Reset
8 In BT manager Find HP Headphones and pair them with password "0000"
9 Start Player and press a cental button on headphones.
10 Then I installed back GPS software and BT Tools.
11 Check thet everithing works fine, make a full backup.
someone tried hp bluetooth headset with wm5?
Re: Widcomm BT Stack on XDAII...
dtktvu said:
HP BT stereo headphones does work with XDAII (myself and few friends have been using it for a while now). You will need to install Widcomm BT stack (1.0.0.3500 or 1.5.0.2000, or the one that have High Quality Audio Profile) though.
However, you will loose Bluetooth Headset profile if you install Widcomm BT Stack. Apparently BT headset does not work with Widcomm stack on XDAII yet. I've managed to get the headset detects incoming calls, take calls, but still no sound coming out from the headset yet. Still trying...
Click to expand...
Click to collapse
Other than the hp headset, does it work on i-tech clip S or i-tech clip S35 bluetooth stereo headset as well.
Re: HP BT stereo headphones with XDAIIi
hahol said:
rodrigol said:
Anyone know anything about this particular combination?
Click to expand...
Click to collapse
I am using this combination.
I have HP iPaq BT stereo headset and O2 XDA IIi.
Just did the following.
0 Full backup!
1 Uninstall a GPS software that was using BT Serial Port (GPS tuner, OziExplorer, Russa)
2 Uninstall BT Tools
3 Remove all paired devices
4 Soft reset
6 Install Attached file (warning: with this patch you will not be able to use a HandsFree BT, so if you do not really mind, then continue).
7 Soft Reset
8 In BT manager Find HP Headphones and pair them with password "0000"
9 Start Player and press a cental button on headphones.
10 Then I installed back GPS software and BT Tools.
11 Check thet everithing works fine, make a full backup.
Click to expand...
Click to collapse
install where ? :?:
has anybody done it this way !
Bstard said:
someone tried hp bluetooth headset with wm5?
Click to expand...
Click to collapse
anyone an idea? i want a bt headset (hp) but not willing 2 go back 2 wm2003
headsets
I have three stereo bluetooth headsets here for testing purposes:
- Logitech Wireless Bluetooth MP3 Headphones for PC (aka Hewlett Packard FA303 or Toshiba PA1831)
- Motorola HT820
- iTech Blueband
I have tested them on my Qtek 9090 (BlueAngel) and they all worked fine. There is not much diffrence in audi quality, the diffrence is more in the comfort of wearing them. Most of my collegues liked the Motorola the most but I prefer the Logitech. The iTech feels a little bit cheap...
More experience and info about stereo bluetooth headset is posted on http://www.robertwebbe.nl/A2DP.html.
Has anyone connected headphones with XDAII? i can't at all( after installing broadcom 1.5 phone cannot call correctly, i can't hear anything(
I have a iMate PDA2k EVDO & iTech BlueBAND headpones. I was able to use use the BT headset to use the phone however as the Broadcom 3500 stack didn't come with a Audio profile I couldn't hear music (mp3s via WM10). I installed Broadcom 3900 stack - can now hear stereo music but the volume on the phone is so low I can bearly hear it. Otherwise my PDA is stock standard Windows 2003 WWE etc. Any suggests? As I am a new owner, I would appreciate the help. Cheers,
Hi
I have recently received a Blue Angel from our mobile provider and it comes with the Bradcom stack 1.0.0.3900.
Does it have A2DP integrated, or I need to install anything to make it compatible? I am interested on a Motorola HT820 headset and i want to make sure it will be compatible...
Broadcom Bluetooth stack for Benq P50
Hi,
Has anyone tried installing the Broadcom Bluetooth stack onto a Benq P50 Window2003 2nd edition? Thanks.
Cheers!
I've spent days searching and trying all sorts of tweaks but I can't get anything to work. Can anyone PLEASE help!
I use Tomtom 7 and I've always sent the voice instructions to the bluetooth speaker in my bike helmet (just a handsfree paired item). I've previously done this on HTC devices with BTAudio and a one line registry tweak. Can anyone offer a solution to send all the audio to a bluetooth handsfree on the HD2?
I really hope someone can help, I've got the HD2 setup just right except for this last remaining item.
Many thanks,
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
xardus said:
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
Click to expand...
Click to collapse
Yes I've tried the "manage system audio in handsfree device" option. I can get some background noise on the headsets (I'm trying with a Scala Rider and Motorola 700 & 850) but I never manage to get any sound.
Can anyone please offer a solution? It's a big disappointment for me if this isn't possible. Any suggestions welcome, many thanks.
My Observations
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Fadetogrey said:
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Click to expand...
Click to collapse
It gives me some hope that you've got it to work with one bluetooth device. Can you please let me know exactly what you did to get the $20 bluetooth earpiece to work?
Thanks,
yeah that was my idea but without a stereo bt device i cant try to myself...i ordered to vodafone one with some of my tons of points...3 weeks and no answer!
I had the same issue and on my old phone, the HTC Touch HD, I used the following program to my satisfaction:
BTAudio
On my HTC HD2 however this doesn't seem to work anymore. :-(
it does the same thing of the inbuild bt option on hd2 its just a "quick link" to place on the bar
anyone of u have any problem with bt device volume? before i have an Artemis and 3 different device i used the device volume was every time the one i choose...now every time a new call starts phone volume its right but device volume jump to minimum level and every time i have to press + button like as i'm playing videopoker to dont miss fist seconds of a conversation
Works fine with Jabra 3030, all audio over it, music, system sounds and calls.
Maybe it's only working for bluetooth devices that are setup as stereo. Can anyone please offer a solution here?
I've installed a 6.5 rom (dutty v7 - thank you) on my HD and after a sprite restore (level 2) bluetooth audio divert works fine. Although I notived that the bluetooth options remained the old settings (possibly due to my backup restore) and the divert was done using the BTAudio. Sorry to keep asking but if anyone can shed light on this.
Is it possible to tweak the HD2 so that audio can be sent to any bluetooth headset/handsfree or is there some hardware limitation that stops this from being done?
I've tried every app and tweak that I can think of! Please can anyone help, even iof it's to let me know why this can't be done.
Thanks,
its what we all are trying to do......now i think its only a bt device problem...if it support bt2.1 and a2dp with edr seems to work all good....
i solved in car with headphone in the box...but bluetooth should be much and much better without any cable that always have to remove nodes (its the right word? sorry if not hehe)
I'm connecting to my HD2 using Jabra Stone, an A2DP headset. When I selected the stereo headset profile on the HD2, it redirected all system sounds to the headset: reminders, SMS alert, soundtrack for videos, audio player....except phone ring. I used BT Audio over a non-A2DP headset before with Diamond2, but the ausio is very poor, and the connection drops very often. Since I changed to A2DP headsets, the Diamond2 and HD2 supports it out of the box - no hack needed.
So look for A2DP headsets if you want to redirect audio.
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
I have an LG HBM-220 bluetooth and cannot put audio to in, only phone calls!
How can i manage to do it?
I blame it on the stupid Widcomm Bluetooth stack... If the HD2 used the better MS stack, BT would play nice with with more of our periphirals and apps
I can't use MSVC properly with BT either....
the solution is to go to the bluetooth settings, select your device and connect the stereo audio connection.
Way back, Microsoft decreed that ONLY the phone app could use a mono BlueTooth headset, although any audio could be redirected to a stereo A2DP headset.
In order to get around this you need to fudge the sytem with something like BTAudio or TekSoft's BlueAudio.
The latter worked on my XDA Orbits (1 and 2) but does not work on my Touch HD with Dutty's R6 ROM (WM 6.5) possibly because BlueAudio requires the Microsoft BlueTooth stack and I suspect Dutty's ROM has the Widcomm stack. But I could be wrong about that.
BTAudio sort of works on my Touch HD, but outgoing audio is speeded up like I've been breathing Helium.
So no current solution to yet another idiotic gotcha from Microsoft.
Noony said:
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
Click to expand...
Click to collapse
Hmmm. When I conect via gprs to youtube aps I can hear the voice in my mono headset (jabra 2020) but via wifi and computer as modem voice is only in phone speaker. So maybe we should look gprs or youtube aps reg tweek.
Guys
i have a nokia HB-100 headset and i'm experiencing all kinds of strange behavours
sometimes system sounds including music ...etc get directed to the headset and some other time it just directs calls no matter how hard i try thru soft resets or unchecking then checking the "play system sounds ..." option!
very strange, any insights about this? is there a tweak to go with or is it a known WM defect?