Related
yup, I fell over... which as if that wasn't painful enough, I also happened to crack the LCD on my XDA 2, which has a nice "windscreen effect" of cracked glass, and the added bonus of wrecked liquid crystal oozing out and ruining it completely.
I phoned O2 and they quoted me £160 for the repair job, but I thought it'd be worth a shot to see if there's a cheaper option, self-repair included (although I have the feeling that self-repair is night on impossible when the colours are pooched) anyhow, recommendations much appreciated.
Try www.pdatechcenter.nl
great people, answer the phone, reasonable price
They just repaired mine +++
bought the LCD replacement from a seller on eBay in taiwan, now I need to work out how to remove the black part at the top of the phone (the one with windows mobile on it)
if anyone knows how, since the service manual is a bit vague (and I'm trying it with a very small hex-key) then it'd be appreciated.
I have a just bought a broken Himalya (XDA2/Orange M1000 all the same thing) and I have no need for it. I purchased it on Ebay and the screen is in excellent condition no scratches no dead pixels and is in mint condition. I also have a PDF from HTC on how to open up the device and change it yourself. I bought it for the speaker as the speaker in my XDA2 was rattling..swapped it out and it still rattles on high volume....hence no need for it. I want the money I paid for the phone.
So for all you guys out there with a broken screen I have one.
email me
[email protected] or call me on 07709 853 073
Cheers
kevin666 said:
So for all you guys out there with a broken screen I have one.
email me
[email protected] or call me on 07709 853 073
Cheers
Click to expand...
Click to collapse
not necessarily, there are different screens that have been put into the XDA2, so whilst it might be correct for one, it won't necessarily be suitable for another
Rrrr said:
great people, answer the phone, reasonable price
Click to expand...
Click to collapse
299€ for the Blueangel LCD not in stock is reasonable ?
now I need to work out how to remove the black part at the top of the phone
Click to expand...
Click to collapse
Don't do that the way as described in service manual in pdf format downloaded somewhere from this server.
Pull the stylus,antenna connector cap and SD out,take a small flat screwdriver and carefuly prise the black cover on this places:
1.Where is the volume slider button
2.on other side below the stylus hole
The cover must easily jump out from the hooks situated below antenna connector and on the other side below the three lines on the cover. Then only pull easily other hooks on the top under the SD slot.
I recommend to put same small paper sheet under this cover when assemblying. That prevents for screech of this part in future.
Hi all, I have broken the plastic part off the stylus...again :roll:
Anyone know if there is a solid stylus available instead of the poorly designed stylus supplied. Yes I know it is because they had to make it black to match the case, but I would have rather had a silver coloured stylus that lasted.
Why they didn't make a completely solid stylus I don't know; other than to generate sales of stylus pens, but they wouldn't do that would they? :shock:
I've even thought about manufacturing some to sell. Would anyone buy such a thing? :?:
funny you mention it, i had to do stylus repairs last night,
the black bit has started to come out of ppc without the rest of the stylus attached,
Tools used for repair : part of a rizla.
I teared enough rizla off to do one lap around the stylus, after licking the gum of course, then banged the black bit back in, now i cant seperate them so i think ive done enough for it to last a while longer now
Maybe you can try one of the replacement styli. The one with a ballpen on one end which translates to THE BALCK PART REALLY IS REMOVABLE so you cannot really BREAK it and not put it back. It's a ballpen cap
Jorgee said:
Maybe you can try one of the replacement styli. The one with a ballpen on one end which translates to THE BALCK PART REALLY IS REMOVABLE so you cannot really BREAK it and not put it back. It's a ballpen cap
Click to expand...
Click to collapse
I'm using that pen/stylus now and another advantage (as was noted on another post in here somewhere) is that the pen/stylus is much more secure in the device than the original stylus. I never had the original one fall out like some have metioned, but now there's not rattle either.
I don't know it the loose fitting stylus was unique to a particular branding, but I have the i-mate Jasjar.
where do you get one of these stylus pens please?
I dunno if this is what kelfor has but you can check www.ppctechs.com or www.expansys.com or any other PDA online shops.
hi all just a follow-up to this post I purchased some styli from expansys, the package was damaged and looked old, or at least poorly stored, 2 came broken the other was fine, I also bought some finger styli for my father - dads and gadgets eh! anyway 2 were missing and again the box looked old and tatty. I reported this and instead of sending me replacements they gave me a refund, they didn't seem at all bothered about it, so I took my business to eBay. I won't be buying from expansys in a hurry.
eBay on the other was excellent bought it from china and was delivered faster than expansys; top service.
PS: stylus and exec are doing fine and I'm really impressed with the xda exec update from O2, it works better than when I had the corp install running.
I purchased one of the ones with a ball-point pen in it, and it was such a bad fit that i had to use a pair of needle-nosed pliers and a lot of force to get it out again!
Rabangus said:
I purchased one of the ones with a ball-point pen in it, and it was such a bad fit that i had to use a pair of needle-nosed pliers and a lot of force to get it out again!
Click to expand...
Click to collapse
I lost one the other day somewhere around my local Tesco's!... Perhaps thats why they ship with a spare :evil:
The only one I've broken so far is the stylus-tip off of a $10 ballpoint one. The ballpoint and top's fine, but I can't use it *as* a stylus anymore. Dropped it onto tile floor in the line at the local supermarket... Oops. Meanwhile, the glue holding the black top bit in my original stylus has come loose, but it's still a tight wenough fit that the stylus works properly. Since I have an MDA Pro, I'd prefer a silver coloured tip anyway.
ther is an all metal 1 floating about, its a nice black 1, cant mind wer i seen it though, but ther is 1 out ther!
Anyone replaced their own Jam lcd/touchscreen? I'm thinking of getting a replacement screen off ebay for $100. It doesn't look all that difficult, but I want to make sure it's not harder than it seems to do a self-replacement.
nvrnuff said:
Anyone replaced their own Jam lcd/touchscreen? I'm thinking of getting a replacement screen off ebay for $100. It doesn't look all that difficult, but I want to make sure it's not harder than it seems to do a self-replacement.
Click to expand...
Click to collapse
Hi nvrnuff,
Opps, I didn't notice there is a replacment screen and already order a Eten M600. Can you please reply back yr end result if you will buy the replacement screen.
Hey nvrnuff,
Are U breaking the LCD (the display) or the DIGITIZER GLASSTOP(the touchscreen sensor) like me. I just found out they are 2 seperate things from http://forum.xda-developers.com/viewtopic.php?t=51395&highlight=lcd after research
Answering my own question:
Jack, it doesn't matter with the Jam. They're all one assembly. Even PPCtechs can't replace only one or the other on this device; they always replace the whole assembly, LCD and touchscreen both. But I know what you mean, and yes it is possible to have a working LCD and broken touch or vice versa.
Second, I recently replaced my Jam housing and found that the LCD/touchscreen assembly is remarkably easy to replace IF YOU FEEL COMFORTABLE WITH DISASSEMBLING THE JAM. For more information on that, read the "Jam housing" thread. I posted there about that whole process on page 3.
Please, its been about a month since the earpiece on my wizard died and i can't find the part anywhere! I found one damaged wizard on ebay which sold for $400 with a damaged screen! obviously a fradulent buyer but the seller hasn't replied yet.
So if your wizard is water damaged, smashed, or simply inoperable i need this one part to fix my earpiece. Also my brothers wizard's speakers are blown so it'd be great if i could get a hold of those two.
What i need is the ribbon cable which connected the main board to the top sliding half of the device. Its a ribbon cable attached to a circuit board on both ends.
Please i really need this so i can bring the phone part of my wizard back to life.
PM me if you know where i can get this part or if you have a damaged wizard.
Thanks in advance!
broken wizard!
i do have a working one with cracked screen. where are you located?
i should have mentioned that.. I'm in austin, texas. If u are over seas i can check to see if i can make it elligible for a corporate rate to ship it to me.
Also how much would u be wanted for it?
I'd offer you mine, but I got the same thing broken.
i just emailed 2 sellers on ebay which have cellphone parts and wizard housings in there stores, awaiting there reply. And i'm working something out with the one person with a damaged one from ebay.
What do you guys think $85 good for a wizard with a damaged screen?
broken wizard
I have a broken wizard--I dropped it, but I can still make calls from it via the bluetooth headset.
PM me if you are interested and I'll give you my phone #.
I've pm'd u, but does that mean your earpiece is broken as well? Cuz what i need is the ribbon cable that powers the earpiece, LCD, digitizer, softkeys, and everything else on the front half of the device. So if yours is broken then probably won't help mine out much.
i guess so. If you need an intact (front) then mine won't help--due to the fact that the "cal answer/hangup " buttons do not work.
The damaged one i bought off ebay came in today, swapped the parts out and now my earpiece is working again!! i'm so excited!!
Now i have all these parts lying around if anyone needs anything send them my way. The parts i got are:
The main board
Camera
Vibrator
Main housing (except for the front its really banged up)
Antenna
Keyboard
But no battery cover, didn't come with one.
Heres a pic of the mess i had on my desk but it all worked out perfectly
--------------------------------------------------------------------------------------------
I no longer have the damaged wizard so please don't PM asking for parts.
hey fone_fanatic, wondering if you ever experienced your Wizard creaking when you press down on the front faceplate(below the call/end buttons)....seems to come from the hinge right under the the right soft key (the one connected to the keyboard), only thing is it only makes noise when the keyboard is closed and my keyboard is not loose at all(nice and snug)....just wanted to know if you might know of a fix for my problem, would you recommend me taking it apart or just sending it in for a warranty repair or do you know if it is pretty easy to somehow shorten the gap between the front face and the keyboard?.... appreciate the time.
Regards,
P.S. My Wizard works fine, its just starting to get very annoying when I make/end phone calls.
no, mine doesn't make any noise when i press down there. well there is a noise but its coming from the battery cover. if your device is under warranty, i suggest sending it in if it bothers you that much. the reason being because when u open it up your bound to break a couple of clips which might make it worse.
fone_fanatic: I love that mess on your desk
You might want to mask out your First National Card though - edge detection filters would love that image...
V
don't worry about the card, its one of those advertisement cards you get in the mail syaing your pre-approved or whatever. i always keep those cards and use them with taking devices apart.
fro the broken units
check out this site they repair and sell repair parts
http://www.pocketpctechs.com/main~u...essories-Stylus+-+Enhanced~item~IMT-LCD03.htm
anyone got a 8125 with a cracked LCD but all other functions still working?
yes, i'm aware of pocket pc techs but they didn't have the part i needed to fix mine whihc is why i bought a damaged one and salvaged the part i needed out of it. Now i've got all these extra parts , but what to do with them...?
@ fone_fanatic
thanks for the advice....off to warranty it goes...hope it comes back with no new problems (fingers tightly crossed)....
Regards,
hey can I see that pic of the parts u got left?
I wouldnt mind buying a wizard with just a broken LCD if it was cheap. $180 to send it in to fix a LCD is super expensive when the phone is like $350 on ebay
fone_fanatic said:
yes, i'm aware of pocket pc techs but they didn't have the part i needed to fix mine whihc is why i bought a damaged one and salvaged the part i needed out of it. Now i've got all these extra parts , but what to do with them...?
Click to expand...
Click to collapse
... wait for the next thing to break? :lol:
tonydt1g3r said:
hey can I see that pic of the parts u got left?
I wouldnt mind buying a wizard with just a broken LCD if it was cheap. $180 to send it in to fix a LCD is super expensive when the phone is like $350 on ebay
Click to expand...
Click to collapse
The reason i bought it the this one with the damaged lcd is because i couldn't find the part i needed (Rigid Flex Board) anywhere so i swapped my broken one out with this one. So if i was to put this back together not only would the lcd be busted but the earpiece won't work also the speakers would be blown (sold good speakers to a friend). Also the front case is heavily scratched/dinged, looks like someone smashed a brick on the phone.
I've dropped my Jamin a few times and since the OEM case doesn't protect the corners of the phone, the housing looks like crap. So, I decided to look for a replacement housing.
Can't remember if I saw the post on here or at howardforums.com, but someone had pointed out that this place sells Dopod/Qtek housings.
http://cnn.cn/shop/dopod-e818-housing-p-704.html
I ordered a case and paid via Paypal. The order went thru fine but then the order status page was stuck on "payment received" for about a week and a half. I sent an email asking when my housing would ship and suddenly a shipment notification email arrived the next day. Don't know if that's a coincidence or not, but it shipped and that's what matters.
Received the case today and I was surprised to receive an O2 XDA case instead of a Dopod or Qtek housing. Actually, this was a good thing because I think the O2 logo is much more attractive than Dopod or Qtek.
I popped open my Jamin, swapped out all the guts into the new housing and pressed the power button. My Jamin still works!
But there's a problem...the stylus is REALLY loose in the new housing! #@%$#@!! I'm positive I didn't have any extra parts left over when I put the thing back together! I crack open the housing again to see what the cause is. Comparing the old and new housing (the middle piece, since that's where the stylus resides), I see that the new housing is missing a little white plastic part that holds the stylus. Unfortunately that little piece is welded onto the old housing! Lucky for me, the middle piece of my old housing only has very small anf faint scratches. So instead of trying to remove the welded stylus holder, I elect to reuse the middle piece of my old housing. Put everything back together again...problem solved!
My Jamin (now XDA) looks like new again. Overall, I think it was money well spent.
BTW, I used these instructions (linked in wiki) to help me change the housing.
http://www.modaco.com/index.php?s=b2088e44f8506a561c3db87e1bb575d4&showtopic=240109
IMO, the instructions could be much better. When I have time, I think I will write a better set with more pictures.
My cases are orange m600 OEMs, but logos can be removed easily, and include the stylus latch in the chassis as well as fascia buttons. And they are about $20 cheaper ;-)
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=130007457342
Richard
fluffcat1 said:
My cases are orange m600 OEMs, but logos can be removed easily, and include the stylus latch in the chassis as well as fascia buttons. And they are about $20 cheaper ;-)
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=130007457342
Richard
Click to expand...
Click to collapse
Doh! Wish I knew that about 3 weeks ago! :? :lol:
How do you remove the logos on the prophet?
troyjam said:
How do you remove the logos on the prophet?
Click to expand...
Click to collapse
Pro method - fibreglass pencil
amateur method - rub a sugarcube over
Both at your own risk mind you!
Richard