I've dropped my Jamin a few times and since the OEM case doesn't protect the corners of the phone, the housing looks like crap. So, I decided to look for a replacement housing.
Can't remember if I saw the post on here or at howardforums.com, but someone had pointed out that this place sells Dopod/Qtek housings.
http://cnn.cn/shop/dopod-e818-housing-p-704.html
I ordered a case and paid via Paypal. The order went thru fine but then the order status page was stuck on "payment received" for about a week and a half. I sent an email asking when my housing would ship and suddenly a shipment notification email arrived the next day. Don't know if that's a coincidence or not, but it shipped and that's what matters.
Received the case today and I was surprised to receive an O2 XDA case instead of a Dopod or Qtek housing. Actually, this was a good thing because I think the O2 logo is much more attractive than Dopod or Qtek.
I popped open my Jamin, swapped out all the guts into the new housing and pressed the power button. My Jamin still works!
But there's a problem...the stylus is REALLY loose in the new housing! #@%$#@!! I'm positive I didn't have any extra parts left over when I put the thing back together! I crack open the housing again to see what the cause is. Comparing the old and new housing (the middle piece, since that's where the stylus resides), I see that the new housing is missing a little white plastic part that holds the stylus. Unfortunately that little piece is welded onto the old housing! Lucky for me, the middle piece of my old housing only has very small anf faint scratches. So instead of trying to remove the welded stylus holder, I elect to reuse the middle piece of my old housing. Put everything back together again...problem solved!
My Jamin (now XDA) looks like new again. Overall, I think it was money well spent.
BTW, I used these instructions (linked in wiki) to help me change the housing.
http://www.modaco.com/index.php?s=b2088e44f8506a561c3db87e1bb575d4&showtopic=240109
IMO, the instructions could be much better. When I have time, I think I will write a better set with more pictures.
My cases are orange m600 OEMs, but logos can be removed easily, and include the stylus latch in the chassis as well as fascia buttons. And they are about $20 cheaper ;-)
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=130007457342
Richard
fluffcat1 said:
My cases are orange m600 OEMs, but logos can be removed easily, and include the stylus latch in the chassis as well as fascia buttons. And they are about $20 cheaper ;-)
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=130007457342
Richard
Click to expand...
Click to collapse
Doh! Wish I knew that about 3 weeks ago! :? :lol:
How do you remove the logos on the prophet?
troyjam said:
How do you remove the logos on the prophet?
Click to expand...
Click to collapse
Pro method - fibreglass pencil
amateur method - rub a sugarcube over
Both at your own risk mind you!
Richard
Related
yup, I fell over... which as if that wasn't painful enough, I also happened to crack the LCD on my XDA 2, which has a nice "windscreen effect" of cracked glass, and the added bonus of wrecked liquid crystal oozing out and ruining it completely.
I phoned O2 and they quoted me £160 for the repair job, but I thought it'd be worth a shot to see if there's a cheaper option, self-repair included (although I have the feeling that self-repair is night on impossible when the colours are pooched) anyhow, recommendations much appreciated.
Try www.pdatechcenter.nl
great people, answer the phone, reasonable price
They just repaired mine +++
bought the LCD replacement from a seller on eBay in taiwan, now I need to work out how to remove the black part at the top of the phone (the one with windows mobile on it)
if anyone knows how, since the service manual is a bit vague (and I'm trying it with a very small hex-key) then it'd be appreciated.
I have a just bought a broken Himalya (XDA2/Orange M1000 all the same thing) and I have no need for it. I purchased it on Ebay and the screen is in excellent condition no scratches no dead pixels and is in mint condition. I also have a PDF from HTC on how to open up the device and change it yourself. I bought it for the speaker as the speaker in my XDA2 was rattling..swapped it out and it still rattles on high volume....hence no need for it. I want the money I paid for the phone.
So for all you guys out there with a broken screen I have one.
email me
[email protected] or call me on 07709 853 073
Cheers
kevin666 said:
So for all you guys out there with a broken screen I have one.
email me
[email protected] or call me on 07709 853 073
Cheers
Click to expand...
Click to collapse
not necessarily, there are different screens that have been put into the XDA2, so whilst it might be correct for one, it won't necessarily be suitable for another
Rrrr said:
great people, answer the phone, reasonable price
Click to expand...
Click to collapse
299€ for the Blueangel LCD not in stock is reasonable ?
now I need to work out how to remove the black part at the top of the phone
Click to expand...
Click to collapse
Don't do that the way as described in service manual in pdf format downloaded somewhere from this server.
Pull the stylus,antenna connector cap and SD out,take a small flat screwdriver and carefuly prise the black cover on this places:
1.Where is the volume slider button
2.on other side below the stylus hole
The cover must easily jump out from the hooks situated below antenna connector and on the other side below the three lines on the cover. Then only pull easily other hooks on the top under the SD slot.
I recommend to put same small paper sheet under this cover when assemblying. That prevents for screech of this part in future.
Hi all, I have broken the plastic part off the stylus...again :roll:
Anyone know if there is a solid stylus available instead of the poorly designed stylus supplied. Yes I know it is because they had to make it black to match the case, but I would have rather had a silver coloured stylus that lasted.
Why they didn't make a completely solid stylus I don't know; other than to generate sales of stylus pens, but they wouldn't do that would they? :shock:
I've even thought about manufacturing some to sell. Would anyone buy such a thing? :?:
funny you mention it, i had to do stylus repairs last night,
the black bit has started to come out of ppc without the rest of the stylus attached,
Tools used for repair : part of a rizla.
I teared enough rizla off to do one lap around the stylus, after licking the gum of course, then banged the black bit back in, now i cant seperate them so i think ive done enough for it to last a while longer now
Maybe you can try one of the replacement styli. The one with a ballpen on one end which translates to THE BALCK PART REALLY IS REMOVABLE so you cannot really BREAK it and not put it back. It's a ballpen cap
Jorgee said:
Maybe you can try one of the replacement styli. The one with a ballpen on one end which translates to THE BALCK PART REALLY IS REMOVABLE so you cannot really BREAK it and not put it back. It's a ballpen cap
Click to expand...
Click to collapse
I'm using that pen/stylus now and another advantage (as was noted on another post in here somewhere) is that the pen/stylus is much more secure in the device than the original stylus. I never had the original one fall out like some have metioned, but now there's not rattle either.
I don't know it the loose fitting stylus was unique to a particular branding, but I have the i-mate Jasjar.
where do you get one of these stylus pens please?
I dunno if this is what kelfor has but you can check www.ppctechs.com or www.expansys.com or any other PDA online shops.
hi all just a follow-up to this post I purchased some styli from expansys, the package was damaged and looked old, or at least poorly stored, 2 came broken the other was fine, I also bought some finger styli for my father - dads and gadgets eh! anyway 2 were missing and again the box looked old and tatty. I reported this and instead of sending me replacements they gave me a refund, they didn't seem at all bothered about it, so I took my business to eBay. I won't be buying from expansys in a hurry.
eBay on the other was excellent bought it from china and was delivered faster than expansys; top service.
PS: stylus and exec are doing fine and I'm really impressed with the xda exec update from O2, it works better than when I had the corp install running.
I purchased one of the ones with a ball-point pen in it, and it was such a bad fit that i had to use a pair of needle-nosed pliers and a lot of force to get it out again!
Rabangus said:
I purchased one of the ones with a ball-point pen in it, and it was such a bad fit that i had to use a pair of needle-nosed pliers and a lot of force to get it out again!
Click to expand...
Click to collapse
I lost one the other day somewhere around my local Tesco's!... Perhaps thats why they ship with a spare :evil:
The only one I've broken so far is the stylus-tip off of a $10 ballpoint one. The ballpoint and top's fine, but I can't use it *as* a stylus anymore. Dropped it onto tile floor in the line at the local supermarket... Oops. Meanwhile, the glue holding the black top bit in my original stylus has come loose, but it's still a tight wenough fit that the stylus works properly. Since I have an MDA Pro, I'd prefer a silver coloured tip anyway.
ther is an all metal 1 floating about, its a nice black 1, cant mind wer i seen it though, but ther is 1 out ther!
hi was wondering if anyone knew where to get the casing for the xda exec?
even im looking for the same...any1?
*bump*
*bump*
If you use the search button, you will find recommendations.
You can try Piel Frama, Boxwave, Proporta, Krusell, etc.
no you dont get it,i dont want a lether case i want the actual plastic outer shell the housing of the phone.
milkshake said:
no you dont get it,i dont want a lether case i want the actual plastic outer shell the housing of the phone.
Click to expand...
Click to collapse
ummm - why??? :?:
To repair/replace the housing of a dropped and cracked exec possibly? To replace the grey casing of an MDA Pro with the oh so sexy black of the XDA Exec? Could be many reasons.
I also would quite like to know if it's possible to buy case components - I've got a particularly nasty scratch on the metal plate on the lid which probably knocks a load off the 2nd hand value. Depending on what I am offered when it's upgrade time, I may want to "refresh" the look of the Exec to get the maximum resale for it.
I changed the case on my m600 last night and it was not a pleasent experiance.. it is possible but very tricky. sellers on ebay often have complete chassis you can buy
I design and protype notebooks for living and i still found it tricky!
http://www.modaco.com/index.php?s=b2088e44f8506a561c3db87e1bb575d4&showtopic=240109
flashmat said:
To replace the grey casing of an MDA Pro with the oh so sexy black of the XDA Exec?
Click to expand...
Click to collapse
how did you know???
this is the reson so anyone know anywhere apart from the luck of an ebay user wanting to sell one? (so far no luck on ebay).
flashmat said:
I also would quite like to know if it's possible to buy case components - I've got a particularly nasty scratch on the metal plate on the lid which probably knocks a load off the 2nd hand value. Depending on what I am offered when it's upgrade time, I may want to "refresh" the look of the Exec to get the maximum resale for it.
Click to expand...
Click to collapse
You'll need to replace the entire lid - you can't just remove the metal section as it's so thin it bends very easily and will not stick back down again properly.
xda-dev member 'monster' had my last xda exec casing for the time being, and they are not cheap - about £40 for everything including a new hinge and hinge cover. No, I don't currently have any, and no, I can't let you know when I get some - I'll make it public when I have any more.
HTC will refurb a mda-pro or m5000 for about £90 but not the exec :-(
Richard
Hi I have a Cingular 8525 and as usual due to my clumsiness I have drop it twice on the cement. Everything's working fine but being a person with a mild case of obsessive compulsive behavior I am buggin......
Also if you guys are looking for a case for your Hermes you should try to avoid this style. My 8525 was securely in this case and the phone 'flew' out of it when it was knocked on the front side of the case. The phone flew out knocking the battery boor, battery, and the sim right out of the phone. Not good! Also, the case uses a magnet for the flap closure so it goes without saying it is sending my phone into periodic landscape mode whenever I remove the phone from the case.
I have tried ebay for a replacement case and unlike all my other phone nothing is available and I mean nothing. Not even one cheesy knock off is on there for this phone.
Has anyone here looked into getting an OEM housing for the 8525?
Personally I would prefer to keep the phone in a 8525 case versus changing it out for other verients.
Sorry for the long post.....I'm sick in bed with a 103 fever so I figure that I would bug u guys
Thanks.
Derek
Looking for same for TyTN
I need a tytn oem case as well. I dropped and scratched mine. Irony of it is, I've had it for two months, purchased invisible skin two days before I dropped it - idn't get a chance to put it on before i dropped it!
Oh and mine was in a metal case. It rell out of that! So nothing's safe. Gotta put on invi skin!
try this
checkout this site. it has pretty much everything that is available.
you might want to invest in the hard metal case : )
http://www.thepocketsolution.com/cingular_8525_accessories.html
armedmetallica said:
I need a tytn oem case as well. I dropped and scratched mine. Irony of it is, I've had it for two months, purchased invisible skin two days before I dropped it - idn't get a chance to put it on before i dropped it!
Oh and mine was in a metal case. It rell out of that! So nothing's safe. Gotta put on invi skin!
Click to expand...
Click to collapse
Did you happen to adjust the hinge(simply by bending it inward slightly) before placing your Hermes inside. I have an aluminum case, and I've test dropped it, and nothing happened.
***Please not from the factory, the hinge merely "clips" over/on the other side of the aluminum housing. If you want to make it more stable you have to slightly bend the "lip" that connects to the lower portion of the housing. YMMV. I had to readjust mine once as the first time I had it way too tight, and it was very hard to get my Hermes out of the case. Now it simply closes with an authoritative click, and I know my Hermes is secure.
Anybody find a place to get the housing for an 8525 yet? There is a large (its not that large, but its visible enough to be annoying) gash on the metal bezel running along 3 of the 4 sides of the display of my 8525
im new to the forums, but my 8525 got knocked out of my hand and got pretty messed up. my "t" key has also started to lift off of the pad. i wanted to know if this has happened to anybody and if there is any replacement keyboards for sale also. can i swithc over to the tytn with the proper front keyboard? any help would be amazing.
i just bought a dummy 8525 off of ebay, Im not sure how they are made, but I am going to see if I can switch the housing
please let me know how it works, i was thinking of doing the same thing...
itlynstalyn said:
please let me know how it works, i was thinking of doing the same thing...
Click to expand...
Click to collapse
The dummy thing did not work, it isnt an actual housing, only the front buttons work, the rest are fake and do not move, there isnt even a real battery cover, its one piece. That was a waste of $10.99
still really desperate to get a new housing, anyone know where one is available?
http://cgi.ebay.ie/OEM-Housing-for-...temZ260100290172QQcategoryZ3728QQcmdZViewItem
Well let me add that I am not the seller. so don't ask me any questions, but this is a seller I have bought housing for my imate jam before...
hrm, sorry about bring up an old thread, but I thought it would be easier than starting a whole new one.
I'm purchasing a used dopod 838 pro sometime this week, and was looking to get a replacement housing for it as it is fairly abused. Would something like the above posted (HTC 8525 case) work well? I notice that, that case doesnt have a powerbutton on the front of the case, will this cause a problem when I go to replace the housing?
Ta.
BSoD_leet said:
hrm, sorry about bring up an old thread, but I thought it would be easier than starting a whole new one.
I'm purchasing a used dopod 838 pro sometime this week, and was looking to get a replacement housing for it as it is fairly abused. Would something like the above posted (HTC 8525 case) work well? I notice that, that case doesnt have a powerbutton on the front of the case, will this cause a problem when I go to replace the housing?
Ta.
Click to expand...
Click to collapse
If should be ok, but you wont have the power button on the right side... ahahhahah it would jzu be a 8525 hahah
Why dont you juz get this one instead... tho
http://cgi.ebay.ie/For-O2-Trion-iMa...ryZ15039QQrdZ1QQssPageNameZWD2VQQcmdZViewItem
armedmetallica said:
purchased invisible skin
Click to expand...
Click to collapse
armedmetallica, where did you purchase the skin from? could you please PM me, thanks!
I know this is an old thread, but i found this place and its pretty pricey...
http://www.cellphone-repair-shop.com/products.php?cat=156
Has anyone found any other place... to get OEM replacment parts..
I know this is an old thread, but i found this place and its pretty pricey...
http://www.cellphone-repair-shop.com/products.php?cat=156
Has anyone found any other place... to get OEM replacment parts..
http://cnn.cn/shop/tytn-grey-housing-p-1295.html
There you go guys.. I dropped my phone before christmas, and broke the latch that holds the battery door on, and I had to use some tape for awhile. I must have ordered one of the last Cingular 8525 cases, since all they have is the HTC Hermes black cases with the front camera hole.
That shouldnt be too big of deal to you guys though looking for new cases. It took about a week and a half to get here (FL, USA) from Hong Kong at Christmas time. Very good site..
spanky310 said:
Also, the case uses a magnet for the flap closure so it goes without saying it is sending my phone into periodic landscape mode whenever I remove the phone from the case.
Click to expand...
Click to collapse
I use a case with magnetic closure..............I put the device into the case with the screen facing away from the magnet and I have never had any issue with it.
http://www.gsm4world.us/shop/cingular-8525-8525-c-210_276.html
55 bucks and your back in business
I am having the same problem sourcing the correct housing for my phone. I am from the UK and have searched high and low to find a housing for the UK equivalent the SPV M3100 (HERM100 - so the label says).
I have checked all the sites mentioned above, at cnn.cn they dont have the correct housing as the front buttons are different? and the cingular housing is 1: not a nice colour! and 2:L i dont know if this includes the mid plate as well.
Does anyone know where i can get hold of the correct housing(not silver) i dont mind the branding.
Good afternoon,
Recently bought a housing for my trinity. (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=120315350939)
The product was not expensive when compared to others, and it is the original cover from HTC. I have the white one, so i wanted to try the black.
The product came as quicker than expected and in perfect conditions. Also, the seller offers a complete kit to disassemble the Trinity. Checked the Dimantos tutorial (to whom i'd like to thank) in http://forum.xda-developers.com/showthread.php?t=311463 and dissassembled my old cover.
The black cover i bought didn't even have the LEDs, the camera protection, the buttons (camera, power) - Well, i thought, i can reuse the old ones. And so i did.
But, unfortunately, when trying to fasten the screw, i realised it's just plastic (there nothing in the cover to "receive" the screw) and its impossible to fasten them.
Also, i'd like to know if its possible to buy those little golden pieces, since i don't want to break the other cover to take them out.
Thanks in advance
wow it looks like you've been conned man...
hm
In my country we say:
how much money-that much music
dont buy cheap things, thaey are mostly not good
pjvieira said:
...The black cover i bought didn't even have the LEDs, the camera protection, the buttons (camera, power) - Well, i thought, i can reuse the old ones. And so i did.
But, unfortunately, when trying to fasten the screw, i realised it's just plastic (there nothing in the cover to "receive" the screw) and its impossible to fasten them.
Also, i'd like to know if its possible to buy those little golden pieces, since i don't want to break the other cover to take them out.
Thanks in advance...
Click to expand...
Click to collapse
Same here,
but I menage to pull out little golden pieces and place them in my new housing.
If you don't find "little gold pieces" here what you can do...
Fasten the screw in golden pieces but only a half way, than take tweezers, grab screw, and pull it out..
Warm golden pieces with lighter (also use tweezers) and stick them in new housing...
I got a cover from ebay and it pretty much went straight on except i had to put the old buttons in because the new on did not come with new ones
Hi,
it s incridible, i ve just finish to change my housing of my trinity 5 minutes ago !!!!
Same problem as you, no way to put screw, so i destroy my old housing to get the 5 gold piece, and i put it in the new.
One thing to say : f***k this seller on ebay, he says nthing about this issue !!!
Good Luck.
trinity housing from ebay
YUP YUP same thing happened to me! Me and my buddy used a lighter to warm the case and then forced the screws in. I had the black and got the white, I also bought the white silicone case too looks good! It was a nightmare I had to use EVERYTHINGfrom my old case.