I've come across annoying problem on my SPV m1000 (XDA II). When I access wap sites in PIE it disconnects and reconnects on nearly each page request. I did a hard reset thinking it might be a conflict with some other software installed but the problem persists. Anybody else come across this?
Also I've found that sometime the device won't turn-on or off when I press the power button, usually have to do a soft-reset. Also annoying.
While googling I came across the solution: use wsp:// instead of http:// for wap sites. Also came across another useful tip - to disconnect from GPRS press the red phone button.
I'm still having the problem (gprs disconnecting on every request) and it's really annoying me. If I put in a wap proxy say 172.18.251.11 (which doesn't actually work), attempt to access a page and then remove it, it seems to solve the problem temporarly which is a bit strange. Can anybody tell me what is the actual wap proxy for Orange?
Does anybody else find it annoying that Microsoft shoves support onto the device manufacturer/wireless operator. It doesn't provide any support for Windows Mobile, not even a knowledge base. I believe there is a bug in PIE for PPC PE 2003 and was hoping for some info in their KB.
Related
Hi guys,
I'm all new to your forum...
I have the o2 xdII, xdaIIs and now i'm using the xda Exec.
I have a strange problem that even o2 technical support team can't fix...
When i start internet explorer it will connect to either gprs or 3g (whatever is available). when i finish browsing the internet, i just close internet explorer and then close the connection by clicking the disconnect button. Where my problem is, is when i want to reconnect to the internet again (say 5 mins after i close the last connection), i cant get any connection whatsoever. I have a good receiption (gprs and 3g). And i have this weird message :
Dialed: mobile.o2.co.uk
The answering modem has disconnected. To check your connection settings and change them if needed, tap Settings.
So after a lot of talking with o2, i still have this problem.
I have tried to uprgrade to the new rom, and nothing, i have change the settings of the cennection, still nothing. i even changed the handset as i and o2 thought it could have been a faulty handset, but still nothing...
The only solution at the present is to do a soft reset everytime i want to connect to the internet... Its very annoying !!!!
Would annyone have a solution ??? Please ?????
Thank you in advance for your help....
Personally; I wouldn't suggest closing the connection and you won't get charged any extra.
this is easy to fix, but you will lose some software you've got installed.
I had this problem and have worked it out to be conflicts between software that handles the phone line. I had mortring, phonealarm and photo contacts pro installed and my gprs would not reconnect after the 2nd attempt. Putting the phone into flight mode and then back into normal mode would allow gprs to reconnect but only once.
So I uninstalled the above 3 applications one by one and found the gprs would reconnect great with only one installed (any one it didn't matter)
So try removing software that handles the phone line until your gprs reconnect works.
Daz
I had to reinstall my O2 XDA (PW10A1, ROM 3.17.03 ENG, 4.21 radio, ActiveSync 4.2.0, build 4876) via a hard reset. Nearly everything works OK, except Pocket Internet Explorer (PIE).
I see a flash of the turning globe, when I try to put a web address in the address bar. No GPRS connection is made automatically by PIE. I have to establish the GPRS connection separately. When I’ve done that, only the local files are shown, i.e. file://\windows\default.com. Just http://localhost shows the turning globe for 5 seconds. All other sites selected from the drop down box do not show up in the address bar and do not connect.
I tried GSM modem connection to my ISP. It works for sending and receiving email, not for PIE.
Using GPRS I can send and receive email.
Using GPRS: I tried VNC and I can connect to my PC’s at home.
Using GPRS I can ping to a number of websites like www.cisco.com using PacketLANce.
I looked for other browsers. MuliIE is an extension to PIE, does not replace it.
The same for ftxPBrowser.
ThunderhawkII needs a subscription. I could use it reading the different introduction pages and registering with them.
AvantGo gives login problems. I don’t know whether they are related to the PIE problem.
My internet connection uses +0~GPRSinternet, does not use proxy settings and has “This network connects to the internet” enabled. It uses server assigned IP addresses and DNS’s; access point name is “internet”. GPRS authentication is CHAP. The three network adapters have no IP or DNS’s assigned.
I did the auto-configuration for O2-NL again.
So I suspect the iexplore.exe file (in the Windows directory, 17494 bytes, 21-06-2001 08:40) went broke. I have nowhere a replacement copy. I think the file is part of the ROM, bacuse I cannot copy the ieplore.exe to somewhere else. So it could not really been changed by some action of mine. Could it be other settings in the XDA, which are causing this?
My questions:
Do you read from the information above that it is a PIE file problem or belonging settings?
Could you send me a copy of the original iexplore.exe?
If not what could be wrong?
What would you do to solve it?
Thanks in advance.
Franz
[email protected]
Same Problem
Hi franz
i have exactly the same problem. i can send emails over wlan or gprs, i can ping, but i am not able to open webpages in pocket ie. i have a prophet (s200) with the newest qtek rom (2.20) wwe.
This is probably a stupid question, but what do you have under:
Settings->Connections->Connections->Advanced->Network selection
First list, 'Programs that connect to the internet...'?
It is possible that your GPRS connection is under say, 'WAP network' or something while in the list 'My ISP' is selected by default so PIE just doesn't know you have a GPRS connection.
Try playing with those settings and see what happens. Since you just did a hard reset it is not possible that you iexplorer.exe file will be corrupt.
I'm having what seems to be the same problem with my Wallaby (specs same as Franz01, was also originally an O2 XDA NL, now taken over by Telfort and now connecting via Telfort Spot GPRS/Edge). Symptoms exactly as described by Franz01 (only local files, just a quick flash of turning globe), although I haven't tried all the connections Franz01 tried, but mail and 'phone work fine. Now I have found one way to fix the problem: a hard reset (perhaps a tip for Franz01?). However this is extremely inconvenient as I then have to spend about a day restoring data, resetting all sorts of configurations etc., and then do it all over again when whatever it is happens again about a month later.
The trouble started after Telfort started migrating to the KPN network (although the network functions themselves work fine), and after an occurrence of what I call the "battery-memory incident". This is when the device suddenly and unexpectedly signals that the main battery is low, and all sorts of things suddenly become slow, very much as if the memory, not the battery was low. The memory applet also suddenly shows hardly any memory available. This condition is fixed by performing a soft reset while connected to the mains charger, but the PIE problem then remains as a sort of "residue". My darling Wallaby has had these "battery-memory incidents" as long as I've had it (since 2002), but the "residue" PIE problem dates from the Telfort move. I went to the Telfort shop in Amsterdam and spoke to their resident "XDA guru" but the hard reset was the only solution he could find.
To avoid having to go down the hard reset path, with all the work this entails, I would love to find another fix. Like Franz01 I'm convinced it's something like a corrupt file or a registry setting, something that a hard reset just happens to fix, but which could be fixed without the hard reset if I only knew what it was.
Levenum, I'm afraid I lose you at Settings->Connections->Connections, I don't get an Advanced tab or button. I get 3 drop-down lists with buttons Modify and Connect, pertaining to "...automatically connect to the Internet...", "...automatically connect to Work..." and "...My Network Card connects to...". For the first two, Telfort Spot is selected, and this connection works. The third one says "Work" and this reverts if I try to change it. Gurus always look at these settings first, and then conclude that they are fine. But I don't get a list of "Programs that connect to the Internet".
Anyway it helps to know that there are others in the world with this very same problem! I'd still love to fix it though.
Resolved!
Three cheers for Oliver (from 19 Nov 2002) on:
http://groups.google.nl/group/micro...01aad387fc9/a703963fe92a23a2#a703963fe92a23a2
This fixed the problem, without a hard reset!
To be sure you get it, I reproduce his solution here, hoping he won't mind (permission has been asked for, though his original answer is bout 5 years old).
"Hi,
check if you have those two files in the root of your "My device":
CMMapG, CMMapP. If they are not there run "\Windows\welcome.exe" which
will recreate them (amongst other things). This solved it for me.
Cheers,
Oliver"
Welcome.exe "walked" me through aligning the screen, cutting and pasting; afterwards the two files mentioned had been created and PIE worked again.
My wifi is not working properly with pocket IE. I can connect to an access point, but when I try viewing a web page with Pocket IE, I get a message saying "The page cannot be displayed or downloaded because the connection was lost."
I am able to download e-mails through wifi, so the connection issue seems to be exclusive to pocket IE. Any ideas on what could be causing this?
I am using WM6 Pro Black 3.01 on a Cingular 8525.
Try changing the following registry entry;
HKCU\Software\Microsoft\Windows\Current Version\Internet Settings\
"EnableAutoDetect" = 1
Turn off & on, and check it out... It worked here...
any luck ? im having the same exact problem and i can't figure it out ? i've also tried to turn the proxy off and it still the same. please help !! thanks
Sorry, I didn't have any luck. Thankfully I don't need wifi so it hasn't really been a big issue. Maybe flashing the rom again would work...?
Turns out all I needed to do was disable the proxy server. All you need to do is Start>Programs>Proxy Settings>Disable Proxy
Hiya,
I've got strange issue with T-Mobile (BTW bargain) internet service and my M700. 30% of times I'm trying to browse www site the explorer does nothing. It says 'Opening' and nothing happens. GPRS connection is being established instantly, clock is ticking, no data transfer tho.
I found a solution - I have to disconnect GPRS, go into settings>connections>connections>advanced>select network>edit and re-type password... Or, I can go into settings>connections>GPRS settings and change from PAP to CHAP authentication or the other way round (doesn't seem to matter as far as I change it)...
Than I can retry to connect and it usually works. I don't have to say that it is time consuming and annoying, do I?
Of course T-Mobile says it is a handset problem, HTC blames T-Mobile.
Anyone with the same problem? Cheers for any advise.
Hey,
I have my tytn set to check emails every 5 minutes using my homes wifi connection. My problem is every once in a while i'll look to find GPRS has connected... this is really annoying me, as i don't know then if email is being checked using wifi or GPRS which costs. MAINLY though bcause I don't know WHY it is doing it.
In connections, my top selection is CONTRACT INTERNET which holds my gprs connection settngs and the bottom one is my work network. the slightest change in either of these STOPS INBOX from checking over wifi giving me an ';error synchronsing message;'
Can anyone tell me WHY my tytn persists with this?
thank you
hey, well incase anyone is reading and looking for a short term fix, UNTICKING the remember password box in gprs settings means if it attempts to dial, it CAN'T connect without the password being ntered. not ideal, but it at least stops any nasty surprises when you don't expect them
I had the same issue with WM 5. After upgrading the device to WM 6 this problem was solved for me.