Ok folks,
Mabe I've missed something over the last year I've played with this XDA. I've never actually tried to use the PDA to get to the Internet while it is in the cradle, that was until today I decided to load up a weather program to play with.
Short of it was that the program could not connect to the internet via the cradle. 1st I'm thinking that maybe it was not suppose to do that, but then I searched the forums here for the last two hours and read a ton of messages, but nothing came close to what I'm wanting. Some basic info is as follows:
ROM A30.09 ENG (which seems old, but that's for another topic)
RS A.33.02
Protocol 1.3.3
O/S WM2003 (ver 4.20 build 13349)
Under Settings -> Connections Tab ->Connections Currently set to "My Work Network" (I chose this manually a little while ago, ws GPRS Connection)
Proxy Settings - Not check-marked, not configured (I think here is where my problem may lie, not sure though what to check-mark/populate with)
VPN - Blank
Modem - Blank
Anyhow, this is what I've got. Anyone have an idea or/post specific to what I'm trying to achieve, that would be great for that info.
Thanks
Greech...
I think you need to select "this network connects to internet".
Then, you need to ensure internet pass through is enabled on active sync i.e. go to "Tools" ---> "Options" ---> Rules tab and ensure connection reads internet.
Cheers.
I do have the first check-mark (This network connects to teh Internet) checked. I've both checked and unclhecks the second box (Dealing with Proxy server, and added an IP address of my local PC however, that seemed silly when I though about it) but no luck. :?
Any other suggestions?
Thanks!
Greech
Actually, scratch all that. I went back thorugh, unchecked, saved, then RE_checked everything, and now it is working. Thanks for the suggestions.
Greech
assss kickin was wonderin the same thing from many days and just read this thread and am online on my xda II via my desktop pc which is connected to internet 24/7 lan
OK so after having problems connecting my XDA2s to my laptop via wifi to use it's ADSL connection, I began to realise it was a major issue for a lot of users.
Having covered almost all the threads here regarding PPC WiFi issues, I still am perplexed as to how the whole thing is successfully set up.
I concluded that it was virtually impossible; that the PC would not provide the PPC with an IP address so I would have to use some sort of application to manage the connection. However, yesterday for some reason only the omnipotent holy deities of the grandiose gods of WiFi would know, I had it working perfectly. For about 10 minutes, until I decided to disconnect to see if I could readily re-connect. My hopes were of course, dashed, and I have not had it working again since.
I have tried every combination of settings on both the laptop and the XDA to no avail, and have followed more threads and links than I can count on my fingers and toes. I've tried all the same settings I had when it was working (briefly) but still have no real success.
So basically, what's the deal with getting this damn thing working? Maybe what I need is a step by step idiot's guide on how to initially set up the wireless network on the laptop first, to make sure it has all the right settings? I'm using a Vaio running XP home (built in WiFi).
Has anyone completely resolved this problem yet? I would really like a solid, clean method of setting up the connection rather than stumbling through a million different combinations of settings and ending up with something hashed and unstable.
Many thanks for any help on this, I'm sure it's a tiresome subject for many.
......And as is always the case, as soon as you post about it you figure it out!
If anyone is still having trouble using their XDA2 to connect to a PC's ADSL via WiFi, ive got it figured!
RE: ive got it figured!
PLEASE HOW? I HAVE ALSO THE SAME PROBLEM HERE
THANKS
Me too. I have a XDA mini S.
I don't know what settings to put into the thing. I had it connected for a short while but when I went into internet explorer it started connecting to GPRS instead of WIFI to internet.
Clearly I haven't got a clue. The book is of no help either.
Any ideas?
Thanks
Think i'm connected to the internet. It doesm't seem to want a password although one is listed listed in the router. Just can't stop it going over GPRS instead of the wifi for intenet????
problem solved
Hi All
Ok heres what I did .
Connections
under my work network
set ,set up my proxy server to "this network connects to the Internet.
Then go to advanced
Under select networrks ,Network management,Set both to "my work network"
Network Card
Network adapters
"My network card connects to work
Then select the network card ie sandisk
tick Use specific ip address
type in 1 thats on your network ,It will connect but you wont be able to browse still
Then soft reboot
change from use ip adress to "server assigned ip address"
soft reboot
and bingo
I have a Cingular 8125 and I love it, well, if I can get WiFi and the rest of the connectivity to work with my T-Mobile US account. The phone is unlocked.
I had everything working, except for WiFi. This is what I experience, I turn on WiFi, the device gets an IP, but when trying to connect with PocketIE, it just hangs and I get a time out or could not connect error.
Has anyone experienced these problems? I thought it was a one time issue and hard reset the device, and now I can't connect to anything, except to make calls. All data services seem jacked.
Any advice on how to fix this? Should I go with another ROM? If so, whats the best one out there?
Also, am I suppose to be able to use Pocket IE when I'm connected to my laptop via the USB?
Thanks,
Danny
i tried out the 8125's ext rom and its basicly making your device connect only through cingular settings. I couldn't get internet access through wifi. Not even Pocket msn, cuz they restricted it with a proxy. What i suggest is you hard reset your device, then when you finish with the intro crap ( align screen, cut & paste, set password) simply soft reset your device and there you go, you know have a Unbranded Wiza100 !!
Go into start/settings/connections tab/connections, under "mediaNet" select "setup my proxy server". Uncheck the box that says "This network uses a proxy server to connect to the Internet."
Hope this solves your problem.
That does it... but with T-Mobile... I need to use a proxy... is there a way around this? I would like to use the proxy...
I can get it to work when removing the proxy... however, if I have the WiFi on and proxy setting on... it won't work. And if I have proxy setting and wifi off, then GPRS doesn't connect.
Any Advise?
try this out. these are the tmobile settings off the clubimate site. they might be out dated but give it a shot. Also don' tthink theres no solution cuz the wizards coming out on tmobile at the end of this month
For some reason, when I install that cab (by copying it to the device and tapping on it), It doesn't seem to do anything. What am I suppose to see after the installation? It doesn't do anything...
Danny
updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
danrw84 said:
updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
Click to expand...
Click to collapse
Does wifi turn on? (Does the left LED blink like it does when wifi is turned on?)
If not, then it could be related to a cingular cab - did you install any of the cabs from the original cingular extended rom?
left led does blink.
ive also gotten as far as picking up a network.
i have tried everything, i cannot get my wifi to work at all. i dont know whats up.
the settings i needed (which i replicated for the new rom) on the old rom, was this
I would select networks, MY work network, this connects to the internet.
then in the WLAN adapter i had to manual enter my dns servers.
thats pretty much it to get it to work, but now with this rom it wont
Similar or different problem? Not sure. PARTLY SOLVED!
updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
Click to expand...
Click to collapse
Hi NG,
I updated my O2 XDA mini s (German) from OS 1.3.4.2 to 2.16.9.1. (Radio 02.07.10 included). To be honest, I was never really happy with the quality and reliabilty of the radio. 4 out of 5 times it did work, but once in a while, especially while roaming, it gave me a headache. After unlocking and updating to the new version, WLAN looks to be working quite well, at least for connecting to access points, but it seems that it can't browse external websites. VXutils give back a socket error trying to access external (outside my home network) websites/Email.
Internal (inside my home network) connections work like a charm. Termincal Services client accesses my Win2003 Server no problem and I can also connect to a website hosted on my internal server. (http://servername:port).
Whenever I try to connect to external sources, the browser stops afer not successfully "locating" the respective server. On the other hand locating might not be the problem. Performing a ping to an external site with VXutils properly picks up the right ip address but cannot send/receive ping!
GPRS works as supposed. Can connect to sites with no problem.
May be somebody experiences the same problem or, even better, has a solution.
By the way I used @Work for all possible settings. The work profile is set up for both connection types.
Besides that, the new rom is really nice
EDIT Well after some time playing around, I have solved the problem or better the problem partly disapeared. In 'Settings' 'Network Adapters' I switched from Use server-assigned IP address to manual and entered IP, DNS, Gateway, etc. With these settings it everything worked after a soft-reset. Going back to DHCP and soft-reset, it first worked an now it doesn't anymore. At least there is a work around and I'm trying now some other things. All machines currently work with the DHCP settings correct. I will check and keep you updated if the problems comes from Server settings or from something in the PDA EDIT
Lars
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
did you change your Wizard to 802.11g. I found that once I did that, the card stopped working.. the setting was 4, but when i changed it to 8 it stopped worked..
it was some registry key. 802dotg or something ..
sorry i cant rember excatly.
did you change your Wizard to 802.11g. I found that once I did that, the card stopped working.. the setting was 4, but when i changed it to 8 it stopped worked..
it was some registry key. 802dotg or something ..
sorry i cant rember excatly.[/quote]
Darn it. I did. I'll re-wipe and not load the 54g upgrade. Thx.
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
Did you by chance install anything from the cingular extended ROM after you installed the imate ROM?
no i didnt load anything
but i want this wifi to work! what the heck!!
try this
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
Danrw. Concerning the registry settings, after patching the os I did change the registry settings. One already existed with the right value as shown in the 802.11g thread. The other one, DotG, I added.
After that, it did pick up a only G router!
As far as setting DNS manually. It is not enough to just cange the dns setting. You have to enter all the information and even after a soft-reset it takes some time to have the settings picked up... Use vxUTIL 'Info'-Screen to check the current settings. I did test wlan before and after applying packages from the extended rom. No change on reliability or performance on WLAN IMHO.
As far as I understand. Your problem is actually connecting to the router/Access Point. For testing please disable all security on your router and do a soft-reset before trying to access. Also since we have heard of several problems with model 9100 not realizing if an access point is available or not. Also change the SSID of your router and if possible the MAC Address of the router.
Don't forget to soft-reset and first try SDIO Adapter inyour pda with auto IP/DNS/etc. settings.
Another thought. Embarassing, but once I messed around with trying to get a new pda online and forgot to disable the mac filter settings in the router, which resulted in being able to see the active router but it didn't let me connect. After those two days I was missing a lot of hair.
Good luck
Lars
summiter said:
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
Did you by chance install anything from the cingular extended ROM after you installed the imate ROM?
Click to expand...
Click to collapse
I did but only the minimum. I trimmed down their install to the basics. I narrowed it down to one of two CABs. Either the gprsstall or EnableEONS. I didn't install either of those and I"m now back up and running. Of course, I still can't get it to prefer WiFi to EDGE.
I had experienced the same problem with home wifi network after upgrading my rom. I saw in my laptop that the key was set to 2. I went to the network cards, clicked on my wifi network, and under Network Key swithed the value from 1 to 2. I can now connect to my wifi network at home.
eb said:
I had experienced the same problem with home wifi network after upgrading my rom. I saw in my laptop that the key was set to 2. I went to the network cards, clicked on my wifi network, and under Network Key swithed the value from 1 to 2. I can now connect to my wifi network at home.
Click to expand...
Click to collapse
I had same problem after upgrading mda pro with new imate rom 1.30. Can you provide step-by-step tutorial please?I use d-link DSL-G604T wifi router; can connect to home network but when try to surf the web from ppc it always connect through gprs; no access if phone is off.Where can I find Network Key to switch?Any set-up on ppc?
Thanks
I had same problem after upgrading mda pro with new imate rom 1.30. Can you provide step-by-step tutorial please?I use d-link DSL-G604T wifi router; can connect to home network but when try to surf the web from ppc it always connect through gprs; no access if phone is off.Where can I find Network Key to switch?Any set-up on ppc?
Thanks[/quote]
I do not know if my solution will work for you because I upgraded my rom to 2.16 but lets give it a try. I use d-link DI-524 wifi router. Start menu > Settings > Connections (tab) > Network Cards [I must admit earlier today when I was trying to connect my k-jam to the wifi, I did get as far as it asking me for my authentication code and afterwards it timed-out] --> select your wifi network [at this moment as I'm trying this out my wifi on my k-jam is off] --> Network Key (tab) > it was the key index that I had to change from 1 to 2. Before doing this though, go to your router's wireless configuration page through your webbrowser and make sure the keyX (it looks for d-link this can be from key1 to key4 or at least on mine) and make sure the key index you select on your mda is the same number that is used on your router for code authentication.
Also I noticed after resetting my k-jam that I could get connected to my wifi but I could not surf, in wifi setting on my k-jam I had to hit renew ip and then I was able to surf.
I hope this works for you. Good luck and many late nights.
no luck with this for me
even tried removing wep all together. tried multiple routers.
i can detect the ssid's, but i cant connect to them. times out on the connect.
Mine worked no problem...you may already have had this suggestion but here was my process.
Unlocked with lokwiz
Upgraded
Reset before extended ROM apps installed
Installed total commander
deleted extended ROM
Upgraded again
i re-installed the CINGULAR ROM and WiFi works like a charm
......any clues?
Here's what I ended up finding out for mine. First, at the time I wrote this, I was running the 2.16 ROM. Now I'm running the 2.17, but the fix is the same with either.
Don't load the cingular add-ins GPRSSTALL or EONS. I narrowed it down to those two that were causing the issue. So, the only ones I install now are CingularMMSAccount, EdgeIcon, TimeStyle, WiFiRate4, and SmartDialingEnable. Thats it, and its all I've seen to be necessary from Cingular's little bundle 'o fun. Everything else I haven't found interferes with my ability to use the phone at all.
Hope this helps...
kristiandg said:
Here's what I ended up finding out for mine. First, at the time I wrote this, I was running the 2.16 ROM. Now I'm running the 2.17, but the fix is the same with either.
Don't load the cingular add-ins GPRSSTALL or EONS. I narrowed it down to those two that were causing the issue. So, the only ones I install now are CingularMMSAccount, EdgeIcon, TimeStyle, WiFiRate4, and SmartDialingEnable. Thats it, and its all I've seen to be necessary from Cingular's little bundle 'o fun. Everything else I haven't found interferes with my ability to use the phone at all.
Hope this helps...
Click to expand...
Click to collapse
What does timestyle and wifirate4 do? I don't have these installed and haven't seen any problems.
I am experiencing a couple of annoying issues with my new HTC HD2. Most of which seems to have coincided with my old O2 number being ported over to T-Mobile. Prior to this I had a temporary number and all settings seemed to work ok (although frankly I cannot recall to be sure). Once the number was ported everything went a bit mental, I could not connect to any internet app via Wi-Fi and various searches boiled this down to an erroneous proxy server setting which once removed resolved my problem. I also had an email issue which I partially resolved by deleting my account and setting it up again from scratch. The two issues I am now left with are a bit odd.
When connected via Wi-Fi neither ie6 nor email will connect - it seems to be that neither of these applications will fallback to wi-fi if there is no mobile coverage/connectivity. To clarify, I have deliberately turned my phone radio off to test it purely with wi-fi - with both apps I get the "cannot connect" message where it prompts me to check that mobile service is available and I am not in flight mode etc. So clearly it is not willing to use wi-fi even though it is connected and I can use Opera with no issues - this does not seem to impact any other application. I wonder if there is a registry issue that is stopping them from using wifi.
I can get round this temporarily if I go into settings>all settings>connections>connections>advanced>select networks and then change "programs that automatically connect to the Internet should connect using:" from "T-mobile Internet" to "My Work Network" however this only reverses the issue i.e. they then work with wi-fi but not on mobile internet (with the added issue that all other internet apps will no longer working on mobile internet) - so this is hardly a satisfactory resolution.
I have had a bash with various other settings but nothing seems to work - has anyone else experienced this issue?
is the option "the internet"available? that would make the app use whatever connection is available to the phone.
as far as the number being ported starting this I'd be tempted to backup and hard reset.let the phone pick up the sim with the new settings from fresh.
Thanks for the prompt response. I have checked other options and whilst there are others none of them are configured. The fact that other applications happily work under either wifi or mobile internet would seem to imply it is just these applications that are being a bit obtuse rather than any of the connectivity settings.
I guess I may have to hard reset - although I am not convinced that the SIM would govern connectivity settings of microsoft applications.
Just noticed QuickGPS does the same thing i.e. will only connect through mobile internet - it complains it cannot connect if I try through wi-fi only.
bl**dy hell - Google Maps does not work now either!!!!!!!!!
lol, one problem breeding others, it's a "feature" hehe.
Ok i'll shut up now.............did a hard reset and all seems good for the moment at least. Frankly I clearly should have bowed to your better judgement LOL
sometimes its the best first thing to try. once you have done a few they only take 20 30 minutes, you can spend hours with network problems.