WiFi, GPRS & MMS Issues, Cingular 8125 on T-Mobile - 8125, K-JAM, P4300, MDA Vario General

I have a Cingular 8125 and I love it, well, if I can get WiFi and the rest of the connectivity to work with my T-Mobile US account. The phone is unlocked.
I had everything working, except for WiFi. This is what I experience, I turn on WiFi, the device gets an IP, but when trying to connect with PocketIE, it just hangs and I get a time out or could not connect error.
Has anyone experienced these problems? I thought it was a one time issue and hard reset the device, and now I can't connect to anything, except to make calls. All data services seem jacked.
Any advice on how to fix this? Should I go with another ROM? If so, whats the best one out there?
Also, am I suppose to be able to use Pocket IE when I'm connected to my laptop via the USB?
Thanks,
Danny

i tried out the 8125's ext rom and its basicly making your device connect only through cingular settings. I couldn't get internet access through wifi. Not even Pocket msn, cuz they restricted it with a proxy. What i suggest is you hard reset your device, then when you finish with the intro crap ( align screen, cut & paste, set password) simply soft reset your device and there you go, you know have a Unbranded Wiza100 !!

Go into start/settings/connections tab/connections, under "mediaNet" select "setup my proxy server". Uncheck the box that says "This network uses a proxy server to connect to the Internet."
Hope this solves your problem.

That does it... but with T-Mobile... I need to use a proxy... is there a way around this? I would like to use the proxy...

I can get it to work when removing the proxy... however, if I have the WiFi on and proxy setting on... it won't work. And if I have proxy setting and wifi off, then GPRS doesn't connect.
Any Advise?

try this out. these are the tmobile settings off the clubimate site. they might be out dated but give it a shot. Also don' tthink theres no solution cuz the wizards coming out on tmobile at the end of this month

For some reason, when I install that cab (by copying it to the device and tapping on it), It doesn't seem to do anything. What am I suppose to see after the installation? It doesn't do anything...
Danny

Related

no WiFi success after ROM update on 8125 -- ideas?

updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
danrw84 said:
updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
Click to expand...
Click to collapse
Does wifi turn on? (Does the left LED blink like it does when wifi is turned on?)
If not, then it could be related to a cingular cab - did you install any of the cabs from the original cingular extended rom?
left led does blink.
ive also gotten as far as picking up a network.
i have tried everything, i cannot get my wifi to work at all. i dont know whats up.
the settings i needed (which i replicated for the new rom) on the old rom, was this
I would select networks, MY work network, this connects to the internet.
then in the WLAN adapter i had to manual enter my dns servers.
thats pretty much it to get it to work, but now with this rom it wont
Similar or different problem? Not sure. PARTLY SOLVED!
updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
Click to expand...
Click to collapse
Hi NG,
I updated my O2 XDA mini s (German) from OS 1.3.4.2 to 2.16.9.1. (Radio 02.07.10 included). To be honest, I was never really happy with the quality and reliabilty of the radio. 4 out of 5 times it did work, but once in a while, especially while roaming, it gave me a headache. After unlocking and updating to the new version, WLAN looks to be working quite well, at least for connecting to access points, but it seems that it can't browse external websites. VXutils give back a socket error trying to access external (outside my home network) websites/Email.
Internal (inside my home network) connections work like a charm. Termincal Services client accesses my Win2003 Server no problem and I can also connect to a website hosted on my internal server. (http://servername:port).
Whenever I try to connect to external sources, the browser stops afer not successfully "locating" the respective server. On the other hand locating might not be the problem. Performing a ping to an external site with VXutils properly picks up the right ip address but cannot send/receive ping!
GPRS works as supposed. Can connect to sites with no problem.
May be somebody experiences the same problem or, even better, has a solution.
By the way I used @Work for all possible settings. The work profile is set up for both connection types.
Besides that, the new rom is really nice
EDIT Well after some time playing around, I have solved the problem or better the problem partly disapeared. In 'Settings' 'Network Adapters' I switched from Use server-assigned IP address to manual and entered IP, DNS, Gateway, etc. With these settings it everything worked after a soft-reset. Going back to DHCP and soft-reset, it first worked an now it doesn't anymore. At least there is a work around and I'm trying now some other things. All machines currently work with the DHCP settings correct. I will check and keep you updated if the problems comes from Server settings or from something in the PDA EDIT
Lars
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
did you change your Wizard to 802.11g. I found that once I did that, the card stopped working.. the setting was 4, but when i changed it to 8 it stopped worked..
it was some registry key. 802dotg or something ..
sorry i cant rember excatly.
did you change your Wizard to 802.11g. I found that once I did that, the card stopped working.. the setting was 4, but when i changed it to 8 it stopped worked..
it was some registry key. 802dotg or something ..
sorry i cant rember excatly.[/quote]
Darn it. I did. I'll re-wipe and not load the 54g upgrade. Thx.
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
Did you by chance install anything from the cingular extended ROM after you installed the imate ROM?
no i didnt load anything
but i want this wifi to work! what the heck!!
try this
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
Danrw. Concerning the registry settings, after patching the os I did change the registry settings. One already existed with the right value as shown in the 802.11g thread. The other one, DotG, I added.
After that, it did pick up a only G router!
As far as setting DNS manually. It is not enough to just cange the dns setting. You have to enter all the information and even after a soft-reset it takes some time to have the settings picked up... Use vxUTIL 'Info'-Screen to check the current settings. I did test wlan before and after applying packages from the extended rom. No change on reliability or performance on WLAN IMHO.
As far as I understand. Your problem is actually connecting to the router/Access Point. For testing please disable all security on your router and do a soft-reset before trying to access. Also since we have heard of several problems with model 9100 not realizing if an access point is available or not. Also change the SSID of your router and if possible the MAC Address of the router.
Don't forget to soft-reset and first try SDIO Adapter inyour pda with auto IP/DNS/etc. settings.
Another thought. Embarassing, but once I messed around with trying to get a new pda online and forgot to disable the mac filter settings in the router, which resulted in being able to see the active router but it didn't let me connect. After those two days I was missing a lot of hair.
Good luck
Lars
summiter said:
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
Did you by chance install anything from the cingular extended ROM after you installed the imate ROM?
Click to expand...
Click to collapse
I did but only the minimum. I trimmed down their install to the basics. I narrowed it down to one of two CABs. Either the gprsstall or EnableEONS. I didn't install either of those and I"m now back up and running. Of course, I still can't get it to prefer WiFi to EDGE.
I had experienced the same problem with home wifi network after upgrading my rom. I saw in my laptop that the key was set to 2. I went to the network cards, clicked on my wifi network, and under Network Key swithed the value from 1 to 2. I can now connect to my wifi network at home.
eb said:
I had experienced the same problem with home wifi network after upgrading my rom. I saw in my laptop that the key was set to 2. I went to the network cards, clicked on my wifi network, and under Network Key swithed the value from 1 to 2. I can now connect to my wifi network at home.
Click to expand...
Click to collapse
I had same problem after upgrading mda pro with new imate rom 1.30. Can you provide step-by-step tutorial please?I use d-link DSL-G604T wifi router; can connect to home network but when try to surf the web from ppc it always connect through gprs; no access if phone is off.Where can I find Network Key to switch?Any set-up on ppc?
Thanks
I had same problem after upgrading mda pro with new imate rom 1.30. Can you provide step-by-step tutorial please?I use d-link DSL-G604T wifi router; can connect to home network but when try to surf the web from ppc it always connect through gprs; no access if phone is off.Where can I find Network Key to switch?Any set-up on ppc?
Thanks[/quote]
I do not know if my solution will work for you because I upgraded my rom to 2.16 but lets give it a try. I use d-link DI-524 wifi router. Start menu > Settings > Connections (tab) > Network Cards [I must admit earlier today when I was trying to connect my k-jam to the wifi, I did get as far as it asking me for my authentication code and afterwards it timed-out] --> select your wifi network [at this moment as I'm trying this out my wifi on my k-jam is off] --> Network Key (tab) > it was the key index that I had to change from 1 to 2. Before doing this though, go to your router's wireless configuration page through your webbrowser and make sure the keyX (it looks for d-link this can be from key1 to key4 or at least on mine) and make sure the key index you select on your mda is the same number that is used on your router for code authentication.
Also I noticed after resetting my k-jam that I could get connected to my wifi but I could not surf, in wifi setting on my k-jam I had to hit renew ip and then I was able to surf.
I hope this works for you. Good luck and many late nights.
no luck with this for me
even tried removing wep all together. tried multiple routers.
i can detect the ssid's, but i cant connect to them. times out on the connect.
Mine worked no problem...you may already have had this suggestion but here was my process.
Unlocked with lokwiz
Upgraded
Reset before extended ROM apps installed
Installed total commander
deleted extended ROM
Upgraded again
i re-installed the CINGULAR ROM and WiFi works like a charm
......any clues?
Here's what I ended up finding out for mine. First, at the time I wrote this, I was running the 2.16 ROM. Now I'm running the 2.17, but the fix is the same with either.
Don't load the cingular add-ins GPRSSTALL or EONS. I narrowed it down to those two that were causing the issue. So, the only ones I install now are CingularMMSAccount, EdgeIcon, TimeStyle, WiFiRate4, and SmartDialingEnable. Thats it, and its all I've seen to be necessary from Cingular's little bundle 'o fun. Everything else I haven't found interferes with my ability to use the phone at all.
Hope this helps...
kristiandg said:
Here's what I ended up finding out for mine. First, at the time I wrote this, I was running the 2.16 ROM. Now I'm running the 2.17, but the fix is the same with either.
Don't load the cingular add-ins GPRSSTALL or EONS. I narrowed it down to those two that were causing the issue. So, the only ones I install now are CingularMMSAccount, EdgeIcon, TimeStyle, WiFiRate4, and SmartDialingEnable. Thats it, and its all I've seen to be necessary from Cingular's little bundle 'o fun. Everything else I haven't found interferes with my ability to use the phone at all.
Hope this helps...
Click to expand...
Click to collapse
What does timestyle and wifirate4 do? I don't have these installed and haven't seen any problems.

It's going out the window!

OK people, I know this site is supposed to be really great, but I have some simple problems, and I can't find the answers by browsing and searching this site. Hell, I can't even identify which phone I'm using....
I bought an XDA Mini S, so what's that called? A kangaroo or something I guess. anyway - I'm about to see if it'll survive being launched high into the air, that's for sure.
I have a home network, a windows small business server running exchange 2003, an ADSL router/firewall and some PC's.
ALL (!?) I want this damn thing to do is surf the network, and the internet whilst at home using a wireless connection. Then whilst it's out and about - to VPN back to home so I can do the same.
However, the set up of this thing is a right nightmare to understand, "My ISP", "My network", "Work", I can't seem to make logical sense of how this thing operates in a networking environment, and I do understand networks pretty well, so this is VERY vexing, hence why this is flying out the window soon.
Anybody feel they can spare some explanations as to how this thing is structured? If I click on anymore settings I might just go mad gibber dribble.
Paulsco - welcome to the board!
Not to sound like a father, but seriously, go and have a game of Call of Duty or something. That's what I do when I'm stressed. It's not worth throwing the thing out of the window. And if you are in a mood to get rid of it, throw it in my direction. I need a Mini S for development!
Ok, what have you done so far?
Have you got it browsing the net through ActiveSync yet?
Ensure that you can sync, then go to ActiveSync, File Menu, Options, and choose "This computer is connected to " The internet.
Then, ensure that your PDA is set to reflect this as well, the internet.
Then hopefully the two should permit you to browse the net through your ActiveSync connection. Try Internet Explorer on the PDA.
If and when you're doing that, then you can progress to wifi and VPN etc.
For wifi, I've always found this useful:
http://wifi.aximsite.com/wifi_net.html
V
Paulsco said:
I bought an XDA Mini S, so what's that called?
Click to expand...
Click to collapse
That's easy - it's the HTC Wizard.
HTC is the comapny that actually makes it and Wizard is HTC's name for it.
Thanks for the response!
That's for the advice - I think I have worn out all the games...
OK - so here is the sit. Make some tea and take a deep breath!
I've got my "wizard" to to most things, it'll sync with Exchange over wifi OR it will sync with a PC via bluetooth, but it won't do both. that's not a real issue though.
Also I can surf the internet via wifi, and I can do this via GPRS, but here is what I need to sort out:
I have two connections listed under settings>connections>connections
The first is the O2 GRPS My ISP connection, and the second is the "My work network" connection. I have defined a VPN to connect back to my firewall in this last connection, but I had to delete the O2 Active default connection in this connection because it kept dialing grps instead of using wifi.
In connections>advanced>network management I have both boxes set to "My work network". this prevents any GPRS calls, until I change the setting. Great, I'd rather not have to have done this, but it does seem to work...
Only thing is, when I am out I tried to connect back to the exchange box and I got from activesync "Your exchange account does not allow syncing, blah blah" which it obviously does because it works from the local network. I have opened all the activesync ports on the firewall.
I hoped to be able to connect the VPN, but this seemed to be impossible with my current config.
I need to be able to configure this so that I can browse my wifi network both locally and remotely. I have managed to get the VPN to connect, but I have no idea why this works sometimes and not others - when you click on connect, you get a beep...and nothing else, no error messages or anything.
So I want to get exchange mail whilst wifi'd: OK that worked this AM because I told everything to use "My work network" that has no GPRS connection defined, but when I wnet out I hthen changed the setting so that it dialed the O2 GPRS connection for Internet, then I got internet, but no VPN connection. then when I returned to the office, I had to soft boot because no matter what I dod, activesync gave me "cannot connect with current settings" - A soft boot cured that, but it's not a real great solution every time you return to the office.
Any help you can give me would be gratefully received! I'll happily bung cash to people for a solution!!!
thanks and regards,
Paul

Normal for gprs to connect when already connected to wifi???

This doesnt seem normal to me as i dont remember this happening when i first got my 8125. When i go to internet explorer after i turn on wifi and connect to my home network it starts loading the page and then the connecting to gprs dialog box shows up. It still seems like it is using wifi but when i click on the wifi signal the gprs time meter is counting up. It seems to me like it shouldnt try to connect to gprs if the wifi signal is already picked up and connected. I thought i remembered reading about this somewhere but ive read so many topics in different places that i cant find it. Is this normal or should i do something to fix it? Thanks in advance.
Ty
anyone?
i just did this last night ..hopefully i rememebr the steps
but what you essentially have to do is remove the connection to the GPRS network and then itll stop connectinig to GPRS brb with an edit ill have to retrace my steps
*EDIT*
ok i think this is how i did it
tap start --settings -- connections tab -- then tap on connections and then make sure that there are no connections for GPRS i know its a little vague but i really forgot how i did it..
can't say that that helped me to much, sorry. I dont want to eliminate the gprs all together, i just dont want it to connect when im using wifi. Please help!
even with wifi on when it goes to sleep it will be the gprs that kicks in - pain in the butt :shock:
im just looking for a fix for this. Unfortunately my work doesnt have wifi so i cant test some things ive read here to see if it still does it. I have tried going into connections-network adapters- and selecting "the internet". Also, when i go to settings--connections--connections-advanced should i have media net, my isp, or my work selected? not sure if this has anything to do with my problem but i just want to make sure. Also, when i am connected to wifi and my gprs timer is also going, which is it using? I have an unlimited data plan so its not the biggest deal if its running but i just want to make sure im using wifi, not gprs.
RegistryWizard?
Are you using the program called "registry wizard"? I know one of the tweaks/registry edits is called GPRS always on. It might be the cause if one of the registry settings is telling the OS to always have a GPRS connection regardless of whether or not there is a WiFi connection or a program is requesting internet data...
Re: RegistryWizard?
justintime07 said:
Are you using the program called "registry wizard"? I know one of the tweaks/registry edits is called GPRS always on. It might be the cause if one of the registry settings is telling the OS to always have a GPRS connection regardless of whether or not there is a WiFi connection or a program is requesting internet data...
Click to expand...
Click to collapse
nope, I don't have that program...
http://forum.xda-developers.com/viewtopic.php?p=320173#320173
You will select either 'My work network' or 'My ISP' depending on which rom you're using. If MEdia Net is selected, it will use GPRS. To tell whether or not it will use GPRS on any of these settings, you hit the 'edit' button. Don't change anything, but check it out, and it will tell you whether it will connect to GPRS if anything is in there. For me, 'My ISP' has 'auto pick' which means if it finds wifi or wifi is enabled, it will use that first, if not then use GPRS. If you have a stock rom, 'My ISP' may not have anything in it, therefore it will use wifi, or nothing. Remember to associate any wireless router you have to either your 'work' or 'internet' profiles.
awsome, looks like that worked. One question though....am i affected in any way by not having it set to media net? Will my edge and everything still work the same if i leave it on my isp? Thanks for the help
Ty
EDIT: It works better than it did but every so often it trys to connect to edge but it usually doesnt unless im inactive for a bit online. Is this supposed to happen?
I now leave my setting set to ISP instead of MediaNet and at first it is just connected to wifi but then as soon as it is done loading a page gprs tries to connect again so i have to hit cancel like 6 or 7 times to stop gprs from connecting. After that it doesnt try to connect but i wish i could avoid this because its a pain when im just trying to find something real fast. I just downloaded opera today and only tried a few pages on my wifi network and from the couple minutes i used it i dont think it ever tried to connect to the gprs while i was using wifi. i will have to test this a little bit more to confirm but is there any way its IE that could be causing the gprs to try and connect even though it has a full wifi signal?

Cingular 8525 Wi-Fi issues

I've been having a bugger of a time with the Wi-Fi on my 8525. I keep getting a response that the WEP key is incorrect. I was able to connect once, and have since deleted my settings that the Wi-Fi network, but nothing I'm trying seems to get me connected.
Any ideas?
Thanks!
I had a problem with my Wifi working when I first got the phone. But since I wanted to SuperCid the phone I had to downgrade the IPL to do so. I re flashed to the same Cingular 1.34 with IPL 1.06. Since then I have not had any problems with the Wifi.
stsanford said:
I've been having a bugger of a time with the Wi-Fi on my 8525. I keep getting a response that the WEP key is incorrect. I was able to connect once, and have since deleted my settings that the Wi-Fi network, but nothing I'm trying seems to get me connected.
Any ideas?
Thanks!
Click to expand...
Click to collapse
Here's a thought. Why not try the Hitchhiker application. It tends to get round quite a few issues in set up. Also once you've got it working and connected to Wifi you can close it down if you wan to and you'll find it has saved correct settings for your normal way of connecting to wifi. Another benefit is that you can cut the wep key from a text document and paste it into the box it gives you (saves a lot of hassle whenever you need to re-enter the key - which in my case is 28 letters digits long!!) WM5 box as you may have discovered does not allow wep pasting!!
You need to have .netframework installed as well byt the link I give you also has a link for that as well:
http://www.kasuei.com/hitchhiker/
Mike
i recently got att 8525 but i havent able to connect wifi with my home network. it asks for wep key, then shows connecting to network and after a while shows wrong network key...no success so far...i even tried the abive hitchhiker sf and all but no luck...has anyone come up with any solution??? i had np connecting 8125 b4...!!!
btw i use wm5 and the most recent att rom update posted on htc site...
hoping for some solution...
I have similar problem too with my cingular 8525. I unlock it to work with t-mobile and also upgrade to wm6 . Now, I can not connect to my home wlan. If I click on wlan, it show my wireless network. But if I click on internet explorer, it show me the default internet window explorer with at & t and window mobile icons. when I click on either one, it take me to media net log in screen. help me
ok, i dont know how but my wifi started working last night!!! b4 it always looked for IP address and eventually disconnects b4 connecting to home network. so i installed "hitchhiker" but no luck either...so i uninstalled and then tried but this time it said connected to network and as soon as i open IE, it disconnects...it looked like wifi connects but then disconnects or timeout due to power settings, so i changed power settings under wifi settings to best performance and now it just connects right away...
--
ellisos020 said:
Just wanted to let everyone know that switching from "best battery" to "best performance" also solved the "incorrect network key" error for me. Thanks Chakli!
Click to expand...
Click to collapse
Thank You Thank you Thank You. I've been at this for a few days now. It would have to be that simple.
Just remember you need to run the remove proxy cab file if proxy is has been set to use GPRS/WAP. Also make sure the right network interface is selected - like work uses 802.11 etc..

The battle for wifi

Hi guys. If you don't remember me - here's my story in a nutshell. I got a 8525 about a week ago. Since day one I tried and tried and tried but never managed to get the wifi working... (as you can imagine I am beyond desperate at this point)
Anyway last night I got thinking and decided to give it another stab. I hard reset, messed with the settings again...and this time manage to get a little further. My phone is now showing me as "connect to network", only problem is I get a message saying "Cannot connect with current connection settings. To change connection settings, tap Settings." each time I try to access anything internet related. I know I'm close especially since I'm actually connected now, I think it's just AT&T's rom doing everything it can to get me to use their networks (I'm on T-Mobile and don't have a dataplan anyway...).
Anyway can you guys think of what the problem might be? I'm so close I can taste it! Thanks.....
Bump... Anyone home?
where did you get your 8525? my wifi on my 8525 works perfectly fine, have u tried upgrading to WM6?
I have WM6 already. I got it off ebay. Everything is perfectly fine with it, it just doesn't want to use the wifi connection to get online.
Try a hard rest.
my 1st 8525 i got off ebay, and it worked great up until a few weeks ago, when the screen stopped functioning it just turned white, i called AT&T and they sent me a new 1 i just got it this morning and now, i cant make calls >.> it will ring then my phone will say i have no service when i have full service and the call will end. but my wifi is fine... did u use the WM6 upgrade that was released by AT&T
No thanks re: the hard reset. I've already done that... If I can't figure this out I'm going to sell my phone and steer clear of ppc phones. I like it, but I bought it for wifi and this is just getting ridiculous. I have tried everything. I've spent hours and hours on this. I've reset my router god knows how many times, played with security settings, reset my phone over and over to start over.....
The worst part now is that I know it's connected. The wifi aspect is fine. It's just the stupid phone not wanting to use the wifi connection for the internet.
Maybe someone with a 8525 and a Linksys router can post ALL of their wireless related settings for me.
Ekh
Yes I used the AT&T update.....
i use wifi and my linksys router, the 8525's range isnt that great u need to be within a few feet of the router to get good reception, im about 30 feet from mine and i get 2 Wifi signal bars and an ok speed. but try this
Start > Programs > Proxy Manager > Disable Proxy
then try to use your wifi, then go back and restore the proxy when your done, i think some 1 told me to do that because att uses that so u can use their internet service or sumthin
Thanks but I'm way ahead of you. I've already tried every piece of advice I've come across on xda. My last hope is someone elses detailed settings.
is your network passworded by a WEP or TKIP ?
It's WPA... My device has the password, and I added the MAC to my router table. It's connecting to the router/wifi...
...it's just that my device won't use the connection
* Sigh * Looks like another one of my please help me posts has gone dead...again...
olly666 said:
...it's just that my device won't use the connection
Click to expand...
Click to collapse
Your problem may be one of the following:
1. The wifi connection is specified as connecting to "work" and programs are set to use an internet connection.
2. The wifi connection is specified as connecting to "internet" and programs are set to use a work connection.
Nope that's not it. But it does remind me of something so thanks. I deleted all the connections seeing as I don't have a dataplan... I made a new connection called "Wifi". BUT, it's not like I can specify any connection for it so it's just blank (no connection specified). By this I mean the options for a connection are:
bluetooth, cellular line, cellular line (GPRS, 3G), Generic IrDA, Hanes...COM1. No option for wireless...
Does that help?
Check that your router is set to allow connections by devices with 802.11b, which the Hermes uses. Most default to 802.11g only.
It's set for b and g
Helloooo...?
Hallelujah!!!!!
People, I have WIFI!!!
Thanks to everyone who tried to give a helping hand... It's really appreciated.
For future reference to those who are suffering from the same problem - this is what seemed to fix it... I entered google into IE via it's IP address rather than it's name (open command prompt, ping google.com...). To my surprise the page quickly loaded. I then instantly realized that the problem was with the DNS settings. I opened up "Wi-Fi" in settings, went to the "Network Adapters" tab at the bottom and entered in the DNS addresses for "IEEE 802.11b/g...". If you need help with this just PM me (I consider myself somewhat of an expert on this topic now).
I thought I was never going to get online. There IS a god!

Categories

Resources