pleeze someone help...ive read all the posts, but still can achieve this. I Have the widcomm stack on xda11, and widcom on xp. i hase a broadband connection, which is called realtek adaptor in my connections. bluetooth is working, ie file sharing is ok, and when i click to connect the network it looks good, but its not really connected. i think i have to create a network bridge on xp, which ive tried, or enabled internet network sharing, which keeos coming back with an error
any help will be gratefullyreceived, and may be repayed with guinness!
Related
hi all, i've the widcomm driver in my xda2, and them runs smoothly
but.. i've the need to share gprs connection from xda2 to my laptop... i can't for 2 different motives:
1) if i enable widcomm drivers, i try to launch the dial-up service... he connects to the standard GPRS provider... and 99% of time it resolves the hostnames... but can't download or ping them :roll:
2) if i enable the microsoft driver (deactivating widcomm, activating microsoft... and turning up the wireless modem software), i can't find the service for let me be connected. (i only see "voice gateway" bluetooth service )
before i installed the widcomm drivers, with this settings i can succesfully connect to GPRS & share connection over bluetooth.. the widcomm are probably the trouble :?
someone know a clear way for make it run smooth ?
Hi,
I've just recived my p3600 and trying to get it to work with my computers at home. It works very well for most of the things but I ran in to some problems when I tried to use it as a modem with my macbook. I knew that this wouldn't be easy but I thought I might ask here if someone got it to work usb or bluetooth dosn't matter.
Best Regards
Magnus
I am not very knowledgable about mac's but you should understand that the P3600 does not support Bluetooth DUN connection. You can only use it as a gateway through the Bluetooth PAN connection or via a USB cable connection.
In order to do this you must use the shared internet connection on your P3600. You can then choose to connect your mac to your P3600 via a USB cable or a Bluetooth PAN connection. Then you must select the connection your P3600 will use to connect to the internet, this is usually a GPRS/EDGE or a UMTS/HSDPA connection. The selection of both connections is done from a drop-down menu so you can't really miss it.
Good luck
pleassssse help me ,
i have a laptop with wifi and a DSL internet conection
and i ask
is that possible to access the net (DSL) using my universal
(without using GPRS ) ,via wifi or bluetooth
i mean using my laptop as wireless modem , NOT my universal as modem ,
and thanksssssss
pleaseeeee help
If you're using your laptop on WiFi to access your DSL connection, is there any reason why you don't just use WiFi on your universal?
thanlks for your reply , but my DSL connected via ethernet cable to my laptop ,and my laptop has a wireless lan on it , so can i make my laptop as a wireless modem ?
If you connect the Universal to your laptop it will use the internet connection over the Activesync connection.
:edit: Just reread, but yes you can also set your laptop WiFi connection to Ad Hoc mode to allow WiFi connections to it and use a shared internet connection that way. You better find a HOWTO or something for that though since it is not so straightforward.
dastan said:
pleassssse help me ,
i have a laptop with wifi and a DSL internet conection
and i ask
is that possible to access the net (DSL) using my universal
(without using GPRS ) ,via wifi or bluetooth
i mean using my laptop as wireless modem , NOT my universal as modem ,
and thanksssssss
pleaseeeee help
Click to expand...
Click to collapse
Sure you can - via either a direct, active BT / USB ActiveSync connection OR a Wi-Fi p2p connection or, if you install the Widcomm BT stack, even BT PAN p2p.
Please read my related articles - I've published many articles on all these technologies.
thank u alll
i'll try it and give you my feed back
thanks again
Menneisyys said:
Sure you can - via either a direct, active BT / USB ActiveSync connection OR a Wi-Fi p2p connection or, if you install the Widcomm BT stack, even BT PAN p2p.
Please read my related articles - I've published many articles on all these technologies.
Click to expand...
Click to collapse
thank you
but i cant find your post related to my issue , can you direct me to one of them
i search by your name ,and the result was to much , i cant find anything
thanks again
dastan said:
thank you
but i cant find your post related to my issue , can you direct me to one of them
i search by your name ,and the result was to much , i cant find anything
thanks again
Click to expand...
Click to collapse
See the Wi-Fi / BT p2p links at http://www.pocketpcmag.com/blogs/menneisyys/102005MPPPCGames.asp
thank you veryyyyyyyyyyyyyyyyyyyyyyyyyyyyyy much
i'll try it , thaaaaanks
I've tried most of the solutions/methods on this forum/net, but it just doesn't work!
I'm able to pair the device, start the PAN service and 'Intetnet Sharing' gets connected as well, PC gets an IP address, but I get no response when I ping or open a webpage.
On the phone end, I've tried with WM5, WM6, WM6.1 and even with WMWi iRouter. On the PC end, tried with 3 different XP/2003/Vista machines. I'm using BlueSoleil 6.2, but had no success with older or later versions either.
Internet Sharing over USB worked fine till my USB connector broke so BlueTooth/WiFi is my only option.
Can soneone help me out please?
if you want to teeth your gprs connection so your pc get internet that way
PAN is not the way to go
search for bluetooth AND modem
in the forums there are many guides how
it's setup
PAN is if you want your pda to get internet from your pc
Thanks for the reply. I tried Bluetooth DUN but it's too slow (115kbps) and keeps getting disconnected every 5 mins...
If Bluetooth PAN is for sharing PC net only, why then does it show up under 'Internet Sharing', and also shows the Cellular net option, as if it can connect the both, like it does for USB? If PAN isn't meant for sharing cell net, it shouldn't show the option, right?
I mean, it's not *impossible* right? We have a TCP/IP network established with all IPs properly assigned; only one device has net access; how hard or improbable can it be to share the net? There has to be a way! :|
Infact, even the inbuilt Help on Internet Sharing describes that cell net can be shared w/ the PC over bluetooth using 'Internet Sharing' and says nothing about connecting as a modem and the whole *99# thing. I was of the opinion that 'Internet Sharing' made that method obsolete...
- Disconnect everything
- Open internet sharing, select Bluetooth PAN, connect. IS should tell you "waiting for bluetooth connection".
- On the PC, connect to the PAN service on the phone. This must work, I've used it countless times.
If traffic doesn't go through, you probably have a proxy set on your device (happens with some network operators) that you need to disable for it to work.
^ That's exactly how I've been trying .. maybe it's because of BlueSoleil?
Which bluetooth stack are you using? I've been searching the local stores for a non-bluesoleil adapter but no luck so far
I'm using the Widcomm stack that came with my BT keyboard/mouse set. I think you can download it for free anyway...
kilrah said:
- Disconnect everything
- Open internet sharing, select Bluetooth PAN, connect. IS should tell you "waiting for bluetooth connection".
- On the PC, connect to the PAN service on the phone. This must work, I've used it countless times.
If traffic doesn't go through, you probably have a proxy set on your device (happens with some network operators) that you need to disable for it to work.
Click to expand...
Click to collapse
Hi Kilrah, could u provide some details about how to disable proxy on the device .
I can connect but no internet traffic on my laptop .I am using vodafone live gprs on xda orbit .Thanks
Hello!
I have a huge problem with WMWifiRouter on my Kaiser. When I try to connect it with the computer (XP) and switch to USB-WiFI mode it doesnt work. Windows shows "this connection has limitedor no connectivity. you might not be able to access..." And on my Kaiser appears: Try to connect again later or input another IP adress(or so).
Pleas help me, I really need to have that USB to WiFi connection!
http://www.wmwifirouter.com/
have you read their faq?
I'm not sure if the program does what
you think it does
it's a program which connecting to the internet over umts
can be connected to by other wifi devices which can share the umts internet connection
Not only over UMTS! It shares the connection of the PC(from eg DSL), and works as a router over AdHoc connection. I know that it works, because i used it on another PC.
Any idea???