Hello,
Apparenlty does the bluetooth carkit Nokia CK-7W supports all bluetooth phones that have BT Handsfree profile.
Does the qtek support this Bluetooth Handsfree profile or does it supports only the headset profile.
or are they the same BT profile?
Thanks
sorry....
You wonn't be able to use it....although you can pair it the profiles don't match.
I own a bluetooth Nokia CK-1W carkit (has the same problem) and it's been difficult to use with my Qtek.
But for now i can receive calls via carkit. Better then nothing at all (if you don't want to remove the carkit).
You must install the Pocket Bluetooth Tools http://www.angeltowns.com/town/bluetooth/
Install it and delete any paired device you have.
Pair up with the carkit and select HEADSET profile.
Then, when the phone rings, bluetooth turns on automaticaly and pairs up with the carkit, then you press the Nokia button and talk.
It works for receiving calls through loudspeaker only.
I've contacted the author of the Pocket Bluetooth Tools and he already knows this bug and should be fixed next release.
Thanks for your answers.
Apparently this new nokia carkit has the pretency to be universal.
If the BTtools can help older carkits, I suppose we can expect that we may make this new one work with the qtek.
Or you can try the Ericssion HCB-30. I have that installed and it works everytime. Now all I need to figure out is how to boost the antenna power of the XDA unit :roll:
he HCB 30 works fine. I'm testing now a techart carkit.
Does any one have tested this nokia carkit?
This could be a very good alternative for BT carkits.
hi guys, i bought a new o2 xda2 from my friend. he also had a logitech hs02-v bluetooth headset working with it. i took the headset to try but it didnt communicate while the xda2 had paired it.
i tried other headsets but no one worked.
xda2 finds the headset, make a pairing(i enter the passkey 0000) and then nothing....
so please help me
Connect the headset to the PC using the utility provided and change the paskey to any other(Like 1234) and then try pairing it...
Most probably it should work fine...
---------------
Sanjeev K Purohit
Did you turn your "Bluetooth Profile ON"?
After you paired your bluetooth-device.
You need to turn bluetooth on (by click at bottom right at Bluetooth icon).
and To turn bluetooth headset on, You need to click at Bluetooth Profile to make it on.
The Bluetooth Profile is stay on your Today screen.
:?: :shock: I have exactly same problem, using latest official rom and stuff - no bt tools or something.
Update: Works with BTTools :idea: 8)
Update of update: It seems that headset needs pairing each time after you turn it off and on. :shock:
I just got the logitech one this morning, it works ok with the MS stack, but I prefer using the widcom stack.
When I use the widcom stack the icon saying that I have the bluetooth headset is there, but the calls dont get channeled to it.
Is it possible to use the widcom stack for headsets? Or is it simply an incompatability?
ok i simply hard reset the device and the profiler brought bluetooth profile. now its ok.
hi.. i have i-mate k-jam and i have a problem i think all who have pocket pcs had it...
the problem is when i receive a call the bluetooth headset isn't being activated automatically, i mean i have to go to menu>>activate headset,,,
i tried to install (bluetooth manager) which is in e-ten devices but everytime it says to me (unable to install the program),, i've downloaded it from this forum by the way,,,
so can you get me (bluetooth manager) or at least tell me the way to activate headset automatically?? thanks a lot
by the way my headset is (Nokia HS-26W)
anyone can help me please?
Hi guys! This is my first post here, so please help me!
I wish to know if it's possible to connect my HTC TyTn to the Parrot CK3100 and to listen TomTom's indications through the car stereo instead through the TyTn itself. Is there a way to do that?
Thanks a lot!
Bluetooth Carkit Parrot CK3100 and TyTn Reply to Thread
foggypunk said:
Hi guys! This is my first post here, so please help me!
I wish to know if it's possible to connect my HTC TyTn to the Parrot CK3100 and to listen TomTom's indications through the car stereo instead through the TyTn itself. Is there a way to do that?
Thanks a lot!
Click to expand...
Click to collapse
Don't have Parrot....
What I use is JetWare Mobile bluetooth extension on my WM6 and it allows me to make and receive calls through my car stereo as well as use voice commander through my car stereo or use my Motorola headset to switch from listening to music on my PC and answering / making calls from my PDA (all automatically)... They have a beta on there site that will allow you to do this. From what I read of your message your only looking for TomTom and Phone so you may only need to use the standard version. The other thing that may be a problem is your car stereo not sure of its capabilities. My stereo has 2 bluetooth connections one for the phone and the other is for the stereo input. I paired the phone to the phone and the stereo to Voice Command (you could use TomTom instead) Sadly don't know much about GPS/TomTom and don't know if it needs voice commands, but do know you need to hear it. BTW its not free, but they have a trial period so you can see if it works for you.
Best of Luck!
I have an answer and a question...
If this was your first post I assume that you have the original rom on your tytn (wm5)
I could listen tomtom and mp3 files by Parrot's bluetooth (ck3100) when I had the original rom using this little app and modifying something in the registry (because the modifications of the registry that made by default this app does'nt works fine for me, read the threath for more info and or if you have issues)
http://forum.xda-developers.com/showthread.php?t=278778
Now have the back majik rom and works fine with parrot, it shows more info than before, but I've tried withouth success using the same method and tomtom doesn't speaks me by the car's sound system yet...
Someone can help me please?
thanks in advance
hello everyone!
i just got my first bt headset, its an anycom aris21.
the pairing with my blueangel worked like a charm, but after a day of useage, i noticed several issues i kinda dislike....
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- people seem to have problems hearing me! can i change the microfone volume of the bluetooth headset on the ba?
- how can i find out what BT stack i have?
- i have now helmi_c's WM06 installed, no changes to bluetooth made.
what recommended changes/updates/patches/... should i try for better performance?!
what to install for best results?!? is that BroadcomBT1.7 still the way to go? what cabs do I need?!
i know, that some issues have already been adressed, but things are changing so fast here, that i have problems being up to date about all issues! so forgive my ignorance and please help me!
i would be very thankful!!!
regards,
krz
Yeh, the Blue Angel is a bit strange with some bluetooth devices.
I have the following issues with WM6 on my BA, which did not exist with 2003SE:
1) When Bluetooth is active, the device turns on by itself every minute or so. I understand that this is a hacked "feature" to prevent the bluetooth from turning itself off. This is probably the most annoying thing about WM5/WM6. Is there any fix I am not aware of?
2) When I start from scratch and pair my carkit (Parrot), everything works OK, except that BA's sound putput, i.e. for Microsoft Voice Command, is coming from the BA instead of the car kit. This is too low a volume, to be clearly understandable in a car. With my Universal (also on WM6) this does not happen.
3) After pairing my Asus GPS, nothing works. If I delete all paired devices and just pair my Asus without being in range of the car kit, it will work. If both devices are turned on (car kit and GPS Receiver), none works properly.
I don't use my BA on a regular basis anymore, because I have my Universal, which works flawless. However, I see no paint in upgrading to WM5/WM6 if one ends up with LESS functionality than the original 2003SE.
The only feature I will be missing is the fact that no RAM memory is used, which means one does not loose everything when the battery drains.
Are there any tips to solve these three problems?
The WLAN "bug" is not really a problem: even with 2003SE I had to occasionaly start and restart the WLAN for it to work properly.
Cheers,
vma
@vma:
1. Well, not at the moment; maybe if someone who can play with the dll's can fix this.
2. I use a Logitech hands-free, and i have no problems.
3. No problem here using a NoBrand BT GPS receiver and the hands-free in the same time.
Overall, my BA work much better on WM6; its just my experience.
problems i still have:
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- how can i find out what BT stack i have?
- i installed that Boradcom stack 1.7 without having any succes in getting my headset to work. with or without patch1 and htcheadset! any ideas?!?
- what excactly is that HTC HEADSET ADDON ?
please answer soon, any help is very much appreciated!!!!
thx in advance,
krz
1. Same here; i think is my hands free set limitation.
2. I get the same using the Broadcomm stack; use the MS stack.
3. Depends; if you use Broadcomm/Widcomm, you have an "about" box; if you use MS, i don't know.
4. i get it working, but with audio in hands free AND speakers; annoying.
5. don't know, try Google.
DANDANA said:
@vma:
1. Well, not at the moment; maybe if someone who can play with the dll's can fix this.
2. I use a Logitech hands-free, and i have no problems.
3. No problem here using a NoBrand BT GPS receiver and the hands-free in the same time.
Overall, my BA work much better on WM6; its just my experience.
Click to expand...
Click to collapse
What Bluetooth Stack you use ?
First, I use the existing MS Stack on Helmi WM6. BT GPS and Handsfree couldn't run at the same time.
Second, I use Broadcomm Stack 1.71. BT GPS and BT Stereo could run at the same time, but Hands-free function didn't run at all.
Give me a light please.
your bluetooth headset
A few of your problems could be from the bluetooth headset you are using now-- such as when people can not hear you clearly. I currently have a sound id sm100 bluetooth headset and it works flawlessly....although i still can not activate voice calling from it(it activates it on my BA so i have to talk into my BA and not my headset). It could just be your headset.
shazzy84 said:
A few of your problems could be from the bluetooth headset you are using now-- such as when people can not hear you clearly. I currently have a sound id sm100 bluetooth headset and it works flawlessly....although i still can not activate voice calling from it(it activates it on my BA so i have to talk into my BA and not my headset). It could just be your headset.
Click to expand...
Click to collapse
Yeah, Bluetooth in BA really sux... you have to choose your bt handsfree wisely, make sure you try it on BA properly before buying it... currently I am using i clip II mini, and it is giving me the same behaviour as shazzy84's
KRZTF said:
hello everyone!
i just got my first bt headset, its an anycom aris21.
the pairing with my blueangel worked like a charm, but after a day of useage, i noticed several issues i kinda dislike....
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- people seem to have problems hearing me! can i change the microfone volume of the bluetooth headset on the ba?
- how can i find out what BT stack i have?
- i have now helmi_c's WM06 installed, no changes to bluetooth made.
what recommended changes/updates/patches/... should i try for better performance?!
what to install for best results?!? is that BroadcomBT1.7 still the way to go? what cabs do I need?!
i know, that some issues have already been adressed, but things are changing so fast here, that i have problems being up to date about all issues! so forgive my ignorance and please help me!
i would be very thankful!!!
regards,
krz
Click to expand...
Click to collapse
Well I found a way to solve the BTA2DP problem. It supports stereo & is just fantastic. you can find these by the following link http://www.teksoftco.com/index.php?section=freeware & this software works too http://www.trianglepowers.com/PPC/ViewApp.aspx?ID=52 (have to register to download). I prefer Teksoft freeware as I am using it. Sometimes it takes a while after a few toggle u get it right
Lost in China
I have a problem with a Chinese Dopod HS-01 BT Stereo Headset!!!
Phone works, but the Stereo Headset starts for a second or two and then it is gone!
Please, help!
Admire people who can bring an answer!
I myself only good in learning physical languanges. So need MP3 HeadSet!
Also using SuperMemo CE the most beautiful tool for language learnig!
Is there any other solution then to change the registry and the things?
Using:
WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5
No one to ask for help over here!
My MSN:
[email protected]
Skype:
janicic
MySpace:
www.myspace.cn/taijiyoga