hi.. i have i-mate k-jam and i have a problem i think all who have pocket pcs had it...
the problem is when i receive a call the bluetooth headset isn't being activated automatically, i mean i have to go to menu>>activate headset,,,
i tried to install (bluetooth manager) which is in e-ten devices but everytime it says to me (unable to install the program),, i've downloaded it from this forum by the way,,,
so can you get me (bluetooth manager) or at least tell me the way to activate headset automatically?? thanks a lot
by the way my headset is (Nokia HS-26W)
anyone can help me please?
Related
hi ppl
i use an austrian mda2 w/ ROM 1.6.00GER and ExtROM 1.60.07 together with a parrot ck3000 handsfree in my car.
i use the original bt stack w/o ANY changes.
making calls and taking calls is no problem at all and works most of the times.
the problem is as follows: when i enter the car, bt turned on, and also profile says "BT Headset ist eingeschaltet (means bt headset is turned ON)", and the n i want to place a call, the call is not routed over the handsfree. explanation is simple: when i change back to "today" - bt is turned OFF !!!
so my conclusion: everytime bt is used for the first time after disconnetion from the handsfree, it just turns OFF when it should connect. after i turn bt on by hand again it works w/o any problem. ('till i come back to the car of course - and everything starts again)
this is very annoying....
so has anyone any hint what to do? i wouldn't really mind updating to an english rom - if i just knew that that does work.
thanks,
servus ize|man
when i use this one
http://bluetooth.i-networx.de/index_e.html
my device turn bluetooth on when i call even though i dont have a bluetooth headset maybe it'll help you
thanks rudegar
i know that stack by TOWA. unfortunately that does not work at all here
i'd love to use it, but w/ this stack my handsfree is reconized sometimes, sometimes i have to pair the devices every time i start my car, and i can NEVER place calls with the combination mda2 with networx bt manager installed.
maybe someone has the same experiences and can report them
servus ize|man
i am pairing a bluetooth headset to my xda II.everything looks fine,device is paired but calls do not pass to the headset.
can somebody help me and tell me what to do
did you install bluetooth tools ?
Did you activate the headset profile?
What brand is your bluetooth headset? Nokia does not work.
from roms 1.60.36 (NL) and 1.72.00 definittely Bluetooth Tools are not needed.
Be sure to pair (did that I guess) In rom 1.72 you will get the question to setup the bonded device to be used with the headset profile.
Activate headset profile
Some headsets don't work, search this forum for other threads on that.
how can i activate the headset profile ?? i have an belkin headset and rom 1.03.00 USA. I haven´t the bluetooth tools, if it´s really needed, where can i find it :?:
come on guys, at least do a search before you ask these things
http://bluetooth.i-networx.de/index_e.html
ok tks, i have installed the tools and select the profile when i pair the device. maybe my question was wrong. Now after all this thing i can´t receive call trought the headset, and i thought that maybe there is and app to do this task easier. thanks again
ok tks, i have installed the tools and select the profile when i pair the device. maybe my question was wrong. Now after all this thing i can´t receive call trought the headset, and i thought that maybe there is and app to do this task easier. thanks again
how can i activate the headset profile ?? i have an belkin headset and rom 1.03.00 USA. I haven´t the bluetooth tools, if it´s really needed, where can i find it :?:
how can i activate the headset profile ?? i have an belkin headset and rom 1.03.00 USA. I haven´t the bluetooth tools, if it´s really needed, where can i find it :?:
go to the link...
http://bluetooth.i-networx.de/index_e.html
hi, finally there is software to enable the audio out from ms stack to bluetooth headset. but i tried on xdaii wm5 still cannot. can anybody especially buzz fix this? Get the software from below link.
http://www.beyondthetech.com/blogs/kjam/
audio out to headset
BTAudio Utilities
These utilities will allow you to turn on/off the redirection of all system audio audio to your Bluetooth Headset.
This requires NO other hacks or modifications to your i730.
The attached ZIP file contains 3 files:
BTAudioOn.exe
BTAudioOff.exe
BTAudioToggle.exe
DONATIONS
If you find these programs useful and would like to send me money, you can donate via PayPal here.
INSTRUCTIONS:
Unzip and place these files on your i730.
- To redirect all sound to your BT headset, run BTAudioOn.exe
- To stop redirecting sound, run BTAudioOff.exe.
- To toggle the redirection on and off, run BTAudioToggle.exe.
- The effects are immediate and the program will not display anything unless there is an error.
NOTES:
BTAudioToggle.exe does not authoritatively know what the current state of audio redirection is, it simply turns the redirection on or off, alternating each time it is run. It uses a temp file, \BTAudio.tmp, to track whether it should next turn on or off. Thanks to johntchow for the icon.
The /v command-line argument will display a sucess message. Failure messages are always shown. Also, if you know how to set up a shortcut, you technically don't need both .exe's. You can run BTAudioOn.exe with the /off argument and it will do the same thing as BTAudioOff. But since each file is less than 4k, which I think is the block size for the RAM file system, it would not actually save any space so what's the point.
This was made possible mostly due to the information at http://blogs.msdn.com/cenet/archive.../12/451012.aspx
Note; Buzz or any expert out there.Please make this utility work with xdaii wm2005c. Please.....Buzz?
:lol:
It works great on my K-Jam. Too bad it is only mono. But still better than nothing!
Wouter
ya. u r luckey fren. working on your k-jam, right?. but why it didnt work on xda11wm2005c with hs820? the mic got responses from the utility but the sound still havent transfer to the bluetooth headset. Ooooo....someone who know software, please help to make this utility work. Moat of the people without widcom installed already started to enjoy all audio transfer to their headset except xda11. Buzz, are u there?
this is the original thread from pdaphonehome.com http://pdaphonehome.com/forums/showthread.php?s=&threadid=54951
When i try to turn the audio on it writtes "Failed to enable BT audio".
What have o done worng. I have put the files in Application Data. It is a Qtek 9100
Did you first turn on your bluetooth?
Sometimes this happens to me too but I now only use the BTaudioToggle tool. I made a shortcut on the todayscreen and it works great!
Wouter
Will this transfer the mic too? I would like to use it for my voip program.
John
www.skynetworks.gotdns.com
I can still use my headset for phonecalls but I don't know if it will work with a computer and VOIP. Haven't tried that one yet!
Wouter
Doesn't work on i-mate jam though
Hey, guys. Found out this great featured hack and still haven't been able to toggle ALL audio out of bluetooth headset on my i-mate jam. Doesn't work! I can only redirect audio from GSM source to headset and back, but can't redirect music from audio players.... seems to be the problem of JAM bt stack...
Who has the same problem please respond
audio out to headset
Hey,
I've tryed the BTAudiotoggle.exe on my Xda Exec what happens is this:
It launches the voice command if I tap the screen the sound goes through the bluetooth headset but the it return back to the PDA.
Is the anyway that I can get the Audio going through the headset for as long that I need it then when I do not need it I can switch it manually back to the PDA.
Please can someone help me because I would like to try the Tom Tom Navigator 5 and see if I can get the sound through the bluetooth car kit which is a Parrot 3300.
Thank you.
Gigino
Hey,
I've tryed the BTAudiotoggle.exe on my Xda Exec what happens is this:
It launches the voice command if I tap the screen the sound goes through the bluetooth headset but the it return back to the PDA.
Is the anyway that I can get the Audio going through the headset for as long that I need it then when I do not need it I can switch it manually back to the PDA.
Please can someone help me because I would like to try the Tom Tom Navigator 5 and see if I can get the sound through the bluetooth car kit which is a Parrot 3300.
Thank you.
Gigino
Click to expand...
Click to collapse
Gigino - this is EXACTLY what I am trying to do also (i have the Exec and Parrot 3300). Did you manage to get it to work?
hi guys
don't suppose anyone has tested this stack on the IMATE JASJAR ?
Cheers
ANy one tried this on an MDA compact UK, or MDA PRO UK
I sure hope T-mobile relase a new ROM with A2DP , streaming support now MS have officially improved their own stack.
http://www.theunwired.net/?itemid=2762
tgmweb said:
Hey,
I've tryed the BTAudiotoggle.exe on my Xda Exec what happens is this:
It launches the voice command if I tap the screen the sound goes through the bluetooth headset but the it return back to the PDA.
Is the anyway that I can get the Audio going through the headset for as long that I need it then when I do not need it I can switch it manually back to the PDA.
Please can someone help me because I would like to try the Tom Tom Navigator 5 and see if I can get the sound through the bluetooth car kit which is a Parrot 3300.
Thank you.
Gigino
Click to expand...
Click to collapse
Gigino - this is EXACTLY what I am trying to do also (i have the Exec and Parrot 3300). Did you manage to get it to work?
Click to expand...
Click to collapse
I've managed to do it by using the information that can be found at http://forum.xda-developers.com/viewtopic.php?t=33756. If you set the registry value then the files work a treat (but are a bit redundant because you can switch the audio to/from headset using the button on it).
Cheers,
Steve.
have you guys tried VJVolubilis? It should work in the same manner.
V
Hi Guys!
Uuupppsss ....
unfortunately the download of the ZIP file is still not working. could anyone of the honourable sirs share it with me?
Thanks in advance.
Hi,
Some background:
I'm currently working on a carputer project. Everything is working wonderfully and right now I'm going through the final phase of having my HTC Universal (WM6) phone use the car speakers and microphone as headset.
On my computer I am running on Widcomm BT ver 5. The Universal phone is running the MS stack. I managed to pair and connect successfully with my WM6 device. The headset works very nicely both ways, but with a problem:
Whenever a phone call comes in the phone automatically answers the call without even asking me. It rings once then answers. This does not happen while not using a BT headset nor does it happen with my regular portable Samsung BT headset. My universal is set to never receive calls automatically on all profiles. I'm assuming the problem is in the Widcomm driver but there doesn't seem to be anything I can change in the software settings.
Does anybody know how to solve this problem? I obviously don't want every single call that comes in to get answered. I wouldn't even mind answering the call from the phone itself (and not from the PC) as long as the voice gets routed from the phone to the car stereo with the external mic.
Thanks!
Yaniv
hi everyone,
I have this problem with my diamond BT , whenever I try to connect it with a BT headset, it DOESN'T recognize it. I always check that the diamond is visible to other devices, and of course that the headset is turned on , but it still doesn't recognize the headset. I tried couple of headsets and I have the latest ROM (Dutty's), and still....
so please, does anybody have a clueeee????
thnx in advance
I had this problem with my carkit, installed this program and works like a charm now: http://www.jetwaremobile.com/