Hi chaps,
Ive got a brand new XDA2 2 weeks ago and I bought a Bluetooth GPS receiver from these guys:
http://cgi6.ebay.co.uk/ws/eBayISAPI...ex_gensales&include=0&since=-1&sort=3&rows=50
Works perfectly without patching, hotwiring or standing on my head - NICE 1!
My question is, can anyone recommend an incar bluetooth handsfree kit rather than headset that works with the xda2???
And is it true that I can run 2 bluetooth devices at the same time if I patch my xda with the now world famous bluetooth patch featured on this forum?
Thanks guys...
Darren
I am running tomtom 2 with the 2.09 gps driver and also a bluetooth headset at the same time without any patch.
ahhhhhh....
so you *can* run more than one device now *without* patching hhhmmmm.... ahhhh... cool, what model is your headset? I really want a bluetooth car kit which detects the phone and takes control when i get into the car but it'll be good to know a headset that definatly works.
Thanks man
I have a sony-ericsson hbh-200 which works ok but only for answering the phone, also it needed rebonding many times. I am now using a Skypower EZ232 ez clip which works the same but re-connects after going out of range, I am as I type, linked via activesync over bluetooth to my pc, I have internet working on the xda2, my bluetooth headset is also working and I also have tomtom2 working using gpsmart gps bluetooth receiver, so more than one device is definitely ok without any patches.
top BT Carkit: Parrot CK2000 or later
I use these fix built in BT-carkit. it makes a good word with the htcII
nice one
Thanks guys.......
Darren
Nokia CK 1-W doesn't work
I've tried the Nokia CK 1-W carkit, but this carkit doesn't work properly with the MDA II. Nokia only supports the handsfree profile and the MDA II is only supporting the headset profile.
The headset profile has got less features than the handsfree profile. I know that Sony Ericsson and Parrot supports both profiles. When you want to have supported all handsfree features by your carkit you need the handsfree profile!
Does anybody knows an update to fix this problem?
I'd like to be able to use a single BT headset with both my XDA II and my laptop for VoIP calls. Possible? Or will one pairing wipe out the other? I actually don't have a BT headset nor BT card in the laptop yet...
yes you can by using sony ericsson hbh-200
you will be able to use more than tow device
I once tested my Jabra BT250 with an XDAII and SE P800.
Seems like the Jabra can be bond with both two devices. So when I get calls from either one of them, the Jabra will be activated.
What i didn't try was recieving calls at the same time with only 1 headset.
Hello,
I wonder if the i-Mate Jam can make 2 bluetooth connections at se same time. I explain myself. I want to make a BT connection with my GPS and also with my BT Handsfree Car Kit.
If this is possible I can use the TomTom soft earing the indications trought the speakers of the car.
THX
Pablik
login
I haven't login yet. My nick is Pablik (from Spain)
Yes it can, I use the TomTom Bluetooth GPS and the BT Jabra 200 headset at the same time with no problems.
I use the standard magician bluetooth stack, no tools or upgrades or anything.
I can confirm this. I tried it with a TomTom Bluetooth GPS and a Jabra BT-250. It worked with the standard bluetooth stack.
THX
Does anyone tried to connect the XDAII with the new HP BT stereo heaphones with XDAII?
I have this HP device but can not install it.
Bummer..
Widcomm BT Stack on XDAII...
HP BT stereo headphones does work with XDAII (myself and few friends have been using it for a while now). You will need to install Widcomm BT stack (1.0.0.3500 or 1.5.0.2000, or the one that have High Quality Audio Profile) though.
However, you will loose Bluetooth Headset profile if you install Widcomm BT Stack. Apparently BT headset does not work with Widcomm stack on XDAII yet. I've managed to get the headset detects incoming calls, take calls, but still no sound coming out from the headset yet. Still trying...
Interesting. Will check it out and reply.
This is my experience using a HP bluetooth stereo headphone bonded with an O2 xdaII. I use Wincom 1.5 Build 2000 from "dtktvu". So far the setup has worked very well. After having used the setup for three weeks, my impression is as follows:
1. Connection with headset is very stable
2. Stereo sound is clear, quality is quite superb really.
3. So far this setup works only for music, it does not work together with bluetooth headsets (if you happen to have one). This means that you can not use your headset at all while using the headphone.
4. The only inconvenience is that if there is an incoming call during song playback, the music pauses but there is not any other audio warning. On the screen you do get a warning that there is an incoming call, though. So in my case, while I listen to music, if I hear a sudden pause then I know that there is an incoming call and act accordingly. Now, let us come to the next point....
5. You have to use Windows Media Player as the player for point 4 to happen. I am not sure how the setup will react to incoming calls with other players such as Winamp, GS Player etc..
6. Battery life is quite good. I get about 6-7 hours of playtime from the headphone.
Now, if only someone will update this Wincom Driver further so that it can work together with bluetooth headsets, then we will have the best of both worlds... Maybe donations from potential users to provide incentive to some expert out there.
Widcomm BT Stack - Get it here
http://forum.xda-developers.com/viewtopic.php?t=11729&postdays=0&postorder=asc&start=50
You may need this key as well
[HKEY_LOCAL_MACHINE\Services\BTIcon]
"Dll"=""
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Transports\BuiltIn\3]
"driver"=""
Thank you to dtktvu
Widcom on XDA II without Windows Mobile SE?
I would also like to use the HP bluetooth headset. I have a XDA II (not IIs). Will the Widdcom stack install on this? I am currently not running Windows Mobile SE.
Many thanks.
keys
where do we copy and paste those keys? do you think this could work with the Magician?
khanh_xda said:
4. The only inconvenience is that if there is an incoming call during song playback, the music pauses but there is not any other audio warning. On the screen you do get a warning that there is an incoming call, though. So in my case, while I listen to music, if I hear a sudden pause then I know that there is an incoming call and act accordingly. Now, let us come to the next point....
Click to expand...
Click to collapse
Try MS VoiceCommand - in new 1.5 version there is incoming call voice notyfication (normal ring goes at half of the sound level and voice engine reads callers ID) maybe it will go through UR headset.
[/quote]
Try MS VoiceCommand - in new 1.5 version there is incoming call voice notyfication (normal ring goes at half of the sound level and voice engine reads callers ID) maybe it will go through UR headset.[/quote]
Thanks for the pointer, didn't work though.
Would welcome any other ideas.
Will this work on XdA2JoJo.v3.2zS version that has broadcom 3900? I'm planning in getting one.
Need advise...
Thanks
HP BT stereo headphones with XDAIIi
Hi,
I've read the thread but cannot see any indication of someone using an XDA IIi and the HP BT stereo headphones. Anyone know anything about this particular combination? So far I know the software that comes with the HP BT stereo headphones will not install on the XDA. And without the BT high quality audio profile installed I cannot get past pairing the devices. Any ideas?
Thanks,
R
Re: HP BT stereo headphones with XDAIIi
rodrigol said:
Anyone know anything about this particular combination?
Click to expand...
Click to collapse
I am using this combination.
I have HP iPaq BT stereo headset and O2 XDA IIi.
Just did the following.
0 Full backup!
1 Uninstall a GPS software that was using BT Serial Port (GPS tuner, OziExplorer, Russa)
2 Uninstall BT Tools
3 Remove all paired devices
4 Soft reset
6 Install Attached file (warning: with this patch you will not be able to use a HandsFree BT, so if you do not really mind, then continue).
7 Soft Reset
8 In BT manager Find HP Headphones and pair them with password "0000"
9 Start Player and press a cental button on headphones.
10 Then I installed back GPS software and BT Tools.
11 Check thet everithing works fine, make a full backup.
someone tried hp bluetooth headset with wm5?
Re: Widcomm BT Stack on XDAII...
dtktvu said:
HP BT stereo headphones does work with XDAII (myself and few friends have been using it for a while now). You will need to install Widcomm BT stack (1.0.0.3500 or 1.5.0.2000, or the one that have High Quality Audio Profile) though.
However, you will loose Bluetooth Headset profile if you install Widcomm BT Stack. Apparently BT headset does not work with Widcomm stack on XDAII yet. I've managed to get the headset detects incoming calls, take calls, but still no sound coming out from the headset yet. Still trying...
Click to expand...
Click to collapse
Other than the hp headset, does it work on i-tech clip S or i-tech clip S35 bluetooth stereo headset as well.
Re: HP BT stereo headphones with XDAIIi
hahol said:
rodrigol said:
Anyone know anything about this particular combination?
Click to expand...
Click to collapse
I am using this combination.
I have HP iPaq BT stereo headset and O2 XDA IIi.
Just did the following.
0 Full backup!
1 Uninstall a GPS software that was using BT Serial Port (GPS tuner, OziExplorer, Russa)
2 Uninstall BT Tools
3 Remove all paired devices
4 Soft reset
6 Install Attached file (warning: with this patch you will not be able to use a HandsFree BT, so if you do not really mind, then continue).
7 Soft Reset
8 In BT manager Find HP Headphones and pair them with password "0000"
9 Start Player and press a cental button on headphones.
10 Then I installed back GPS software and BT Tools.
11 Check thet everithing works fine, make a full backup.
Click to expand...
Click to collapse
install where ? :?:
has anybody done it this way !
Bstard said:
someone tried hp bluetooth headset with wm5?
Click to expand...
Click to collapse
anyone an idea? i want a bt headset (hp) but not willing 2 go back 2 wm2003
headsets
I have three stereo bluetooth headsets here for testing purposes:
- Logitech Wireless Bluetooth MP3 Headphones for PC (aka Hewlett Packard FA303 or Toshiba PA1831)
- Motorola HT820
- iTech Blueband
I have tested them on my Qtek 9090 (BlueAngel) and they all worked fine. There is not much diffrence in audi quality, the diffrence is more in the comfort of wearing them. Most of my collegues liked the Motorola the most but I prefer the Logitech. The iTech feels a little bit cheap...
More experience and info about stereo bluetooth headset is posted on http://www.robertwebbe.nl/A2DP.html.
Has anyone connected headphones with XDAII? i can't at all( after installing broadcom 1.5 phone cannot call correctly, i can't hear anything(
I have a iMate PDA2k EVDO & iTech BlueBAND headpones. I was able to use use the BT headset to use the phone however as the Broadcom 3500 stack didn't come with a Audio profile I couldn't hear music (mp3s via WM10). I installed Broadcom 3900 stack - can now hear stereo music but the volume on the phone is so low I can bearly hear it. Otherwise my PDA is stock standard Windows 2003 WWE etc. Any suggests? As I am a new owner, I would appreciate the help. Cheers,
Hi
I have recently received a Blue Angel from our mobile provider and it comes with the Bradcom stack 1.0.0.3900.
Does it have A2DP integrated, or I need to install anything to make it compatible? I am interested on a Motorola HT820 headset and i want to make sure it will be compatible...
Broadcom Bluetooth stack for Benq P50
Hi,
Has anyone tried installing the Broadcom Bluetooth stack onto a Benq P50 Window2003 2nd edition? Thanks.
Cheers!
After reading and trying nearly everything I have read on these and other forums I am still unable to get my XDA II to work with my bluetooth handsfree kit, The handsfree kit is a Nokia CKW-1, I have installed Bluetooth tools and tried this route but that didnt/doent work, I am running xda2.hery.mod.a Rom 2.06.00WWE Radio 1.18.00 Protocol 1.337.38, I am more than happy with it all aprt from the fact I have to carry another phone to connect my carkit, and then end up switching sims all day long so I can use the XDA for remote desktop and then taking it out whilst I am on the move so I can take calls
Any pointers at this stage would be greatly appreciated
TIA
Orinoco
I have the exact same problem with my motorola h700 carkit!!!
I have the version of rom on qtek2020.
P.S: The headset of platronics works fine...
Plz check this forum as there are many old threads on the BT carkit issue.
The (standard) MS BT stack on Himalaya does NOT support the handsfree profile that most carkits use.
It only supports the headset (for...headsets) and serial-port profiles (for e.g. gps).
There is a Parrot carkit that can be configured to use the headset profile however.
Himalaya was one of the first devices to use the MS BT stack. Nowadays with WM5 everybody is and now they also support more profiles (incl. handsfree)
Upgrade to the WM2003SE (Second Edition) ROM from buzzdev.net. That supports "handsfree" profile as well as headset. It works just great with my Parrott bluetooth car kit, two Nokia & Motorola bluetooth ear pieces and my TomTom bluetooth GPS!
(Use WM2003SE rather than WM2005, as this will still run all your existing WM2003 applications whereas some WM2003 apps don't work on WM2005 (such as the Safecom wifi card or Tom Tom Navigator v3)
youre right if you mean the 2.20.07 (chinese translated to english) rom.
That one does support headset, handsfree and serial port.