Related
The battery was getting low so I hooked it up to charge via USB and when I went to grab it before work I realized that it wouldnt turn on!! Any thoughts? I know the charge light came on when I first plugged it in but nothing was lit when I unplugged it. When I plug it in now I get nothing.
Is it a paperweight or do I just need a new battery? Maybe the battery, being bad, never charged when I hooked it up and it died???
Any thoughts?
Just to test it for you I took out my battery and pluged in my 8125. It will NOT turn on without the battery. So it could be just the battery in your case.
Hope it helps.
Later; Lew
yes that does help because I was wondering if it would power on without the battery. I guess I'll have to hunt for a new battery that isnt located in honk kong or somewhere that would require a customs fee. I think I'll just head over to my local TMobile store when the MDA's come out and see if they will let me use their dummy battery to test my 9100.
I just got my 9100 used and so far Im starting to wonder if the seller was getting rid of it because its a lemon. The reception is horrid compared to my sidekick2 which of course is not known for its excellent reception by any stretch lol.
I have exactly the same problem with my unlocked MDA Vario
I thought the battery was empty ... Now it doesn't recharge at all .... I used the brand new Vario for weeks without a problem. Now I cannot return it under warranty because I cannot relock it
I got a used wizard today,it is a few weeks old I also got a cradle with it.
I pluged in the cradle to the USB port and the charger to power, after playing with it for 1-2 hours I placed the wizard on the cradle to charge and after a few mins i noticed that it was over heating. I removed it from the cradle right away and noticed that the battery was droping 1% every minute or so. After it was down to 27% i removed the charger and left only the usb connection and placed the wizard on the cradle again. it was charging fine, when it was up to 90% removed it from the cradle and again was droping fast.
When it was down to around 25-30% of the battery I did a soft reset and since then I can never get it to start again also the red charging light does not show.
What the heck is wrong with it? I also get a light burning smell from the bottom of the wizard where the connector is located.
Any help?
I need your lights guys.
Don't like the sound of the light burning smell, that sounds like an electrical fault. It looks like your battery has died and the wizard battery setup is well known to do this. You need to plug it into the official mains charger (not the usb one) as this has an output of 1A, enough to kick start the wizard battery into life and start the charging. You need to wait a short while though before the light comes on. If this fails try to get a new battery and try that. Any more light burning smells and it needs to go back to the supplier.
I would suggest that you send it back to replace/repair. The rapid dropping of the battery power suggest that it is using power somewhere (illegally). I've heard cases of battery caught on fire, etc. and I won't suggest you to use it anymore until you sort out the 'burning' smell.
First of all thanks for your replys.
I pluged the charger on it and the red charging light came on after a while.
charged for over 6 hours and its still red? I think after been charged should change to green? right?
anyways after all that still doesnt want to turn on. I got it to start a couple of times but only to the point that shows the splash screen with the rom numbers and then it turns back off.
Should I give it a smash across the room on the wall? done that with some other things and worked just kiding.
Forgot to add that up to the point when i did the soft reset the device was working fine except the charge drop. Soft reset was done while it was working ( turned on)..... if thats any help.
i thinking u need flash phone with jafwm
and here u will find 3 flashs
www.gsm-support.info
fonec said:
i thinking u need flash phone with jafwm
and here u will find 3 flashs
www.gsm-support.info
Click to expand...
Click to collapse
That ain't gonna do jack sh1t to it. If it can't start to get into bootloader, it can't flash....and it's not a flash issue.
Usually the red light means power but not charging - happens to my qtek 9100 when I let it get too flat and I have to remove and insert the battery while the mains adaptor is attached - others have to 'jump start' the battery by directly connecting to a PSU - I wouldn't do this with yours.
From what you have said it sounds like a short somewhere. Any signs of water damage? Warranty? What Wizard do you have and what country are you in?
Richard
I got the wiza 200 O2 xda mini S from a guy in UK from ebay. The idiot sold me a cradle for it with an adaptor that says 12V on it (Like an idiot that I am i just noticed that) but then again how am I supposed to think that he gave me an adaptor that its not made for it when it says on the back of it "for Imate - Kjam". Do you guys think thats what burned the **** out of the unit ?
dont forget that some times turns on shows the ROMS numbers and turns off.
No water damage... I think its on warranty... I live in Greece.
Might not be the cradle - it could be it steps down internally to 5v. Use a meter and check what it outputs to the phone. Warranty with XDA's are 2 years to the *original* purchaser. As they are only supplied with an airtime agreement then that isn't you.
Richard
have you tried changing batteries to a new one? Seriously, thats the easiest thing you could do right now and you could actually get results.
Ok this is what I did.
Removed the baterry from the device,
got a 12V 1 Amp power supply that I had lying around and give it a few shots connecting it to the battery giving it an electro shock.
(If you're going to try this be very carefull.<<<< DONT LEAVE the power supply connected to the battery>>>> just give it a few shots 1 second on and off.
That was it.
It started working, device turned on and now its charging (I think) yellow light is on.
I'm going to leave it on for a few hours and see what happens.
Wish me good luck. I'll let you know soon.
ok... this is what happend.
Battery is drained and its not charging due to a blown fust on the main board.
I open the phone and placed and solder a little wire over the fuse.
Still does not charge. ^%$#%$#$^%$*
Before I replaced the fuse or should i say short it the yellow light would come on for a few min and then red again. Now when I charge the battery with another external power supply the pda comes on for a few mins and then dies again. ( no charging light whatsoever).
Does anyone know where to get a mainboard for it and about how much it costs?
Asking for help again.
SmartMan said:
ok... this is what happend.
Battery is drained and its not charging due to a blown fust on the main board.
I open the phone and placed and solder a little wire over the fuse.
Still does not charge. ^%$#%$#$^%$*
Before I replaced the fuse or should i say short it the yellow light would come on for a few min and then red again. Now when I charge the battery with another external power supply the pda comes on for a few mins and then dies again. ( no charging light whatsoever).
Does anyone know where to get a mainboard for it and about how much it costs?
Asking for help again.
Click to expand...
Click to collapse
Hey man, sorry to hear about that.
The best you can do is to claim your money from ebay.
You probably killed it when you pluged in the 12V PSU. That's 230% of the normal Volts! Otherwise sell it for parts.
I'm in the process of claiming the money back from the IDIOT that sold it to me.
Lets see if that part of Ebay works as good.
SmartMan said:
I'm in the process of claiming the money back from the IDIOT that sold it to me.
Lets see if that part of Ebay works as good.
Click to expand...
Click to collapse
Doubt it. Did you ask the seller for help before opening the phone and voiding the original warranty on the device?
SmartMan said:
ok... this is what happend.
I open the phone and placed and solder a little wire over the fuse.
Click to expand...
Click to collapse
Not a good idea IMO as now the blame is on you as previously he may have been able to get warranty service from the original vendor.
Richard
I did ask.
He is not the original buyer.
what was I suposed to do.... track back 2-3 buyers to find the original... send it to him so he can have it repaired? Anyway it was out of warranty because of the burned fuse that says that some other charger was used with it.
I had a similar thing happen but fortunately not as bad as yours. Twice now my battery has mysteriously drained completely. The last time when I tried to turn the unit on, it flashed the boot screen for a couple of seconds then poof, no more juice. When I plugged it into the USB port, nothing, no lights, no charge, no recognition from Activesync, I thought the unit was fried. I use Tmobile and got to admit they did send me a replacement fairly quickly. Before I packed up my unit I thought maybe I should plug it in using the wall charger and presto, it came on and is working fine. I have no idea what causes this but do know that if the battery is completely discharged the USB port can not over come this to put a charge on.
Same thing happened to me, kind of strange though. The charge was perhaps 70% to the best of my knowledge. I flashed it with Mr. Clean ROM and booted it up.. it came in fine into WM5, then it started the installation of the 3 progs or whatever comes with Mr. Clean.. after the second finished the unit just died *poff*. Screen blank, no responce to power buttons or any other buttons for that matter.
I've tried taking out the battery for different intervals of time, no luck. I've tried using the AC charger, no luck. No lights, sounds, telepathy or matrix ****.. it just lies there like a dummy phone.. hmm what to do. Bought it from a guy in UK (im in sweden) on eBay, don't think I will have much luck there.. even though it's brand new...
Any thouhgts?
I have had this problem - I bought a replacement battery and all is now fine. Another thread in this group states that the battery cannot charge without the OS up - so if the battery is completely discharged then it is impossible to charge through the phone. The only solution seems to be somehow to charge the battery directly - as appears to have been done earlier in this thread.
Chris
p.s. if anyone knows of another way to do it I'd be interested to hear as I'd like to revive my old battery and keep it as a spare
Hello everyone
I come to you for council and advice.
A month back before going do bed, i put my pda charging from a usb port on one of our pc's.
The orange light lit up.... so... i went to bed.
a few hours after, i got up... went to work with the pda with me... and noticed that there was no charge on it... (not more that it had before i put it to charge).
I tried to charge it when i got home... it didn't charge. I thought i might have damaged my normal charger... so i grab a usb cable... no charge... no connection to active sync.
I grabbed the PDA, and all of the box contents, go to the store where i bought it (Worten, in Portugal) e deliver the third PDA i had for warranty.
This was on 5/11/2007, early evening.
Today, day 6/12/2007 i got there... and they said they received a repair budget of 340 euros for a new mainboard, because due to hacking with WM6 i had lost the warranty.
First, i don't know if they can use this right. The warranty statement clearly defines they have 30 days to give me some info.. the first call they (tried) to make to me was after the 30 days completly gone by.
Second, 30 days to tell me i have NO WARRANTY?
Anyhow, anyone got some tip they can give me to try and solve this problem?
I have the same VERY BAD LUCK HERE P3600
Hello to all, like our friend daedric I have the same problem, the only diference was that when I tryied to do the "romupdateutility" recovery in the 1st step I didnt disconnected the cable in the 2nd step just removed the battery whait 3 seconds and place it back then When I press the Power Button nothing happend so since I bought in the same place that daedric and Unfortunly the rom that I have in it is not the Original Warranty rom so if any one has something that I can do to resolve this issue please HELP.
When i plug in either the cable to charge from the mains power, or via my pc,
It does not begin to charge
It does not show up on pc either.
it did about 1 minute ago but then it went off.
it was just going on and off now i cant get it on at all
i dont no why its broke.
i havent spilt water on it
Run a quick backup using your favourite software (or just sync it and then do a hard reset (clear storage option from settings...)
This will wipe everything off your device but I have seen stuff like this before (though I am not going to guarantee it will work in your case as it could just be a hardware fault...)
Good luck!
Smiffy.
turns out that i had orange insurance on my phone
LoL one of those extras you pay for without nowing you had
I got a free replacement
MY phone died the other night and wouldn't charge. It blinks red when plugged in and will blink numerous times when you press power. Sometime when its plugged in and i press power it will only blink red once.
Its rooted with 024. Im screwed eh?
Also im with Rogers in Canada
I vaguely remember having this sort of problem before.
What was happening was the cable wasn't working properly for some reason, and my phone wasn't drawing enough power to charge. Therefore it not working, and the red flashing light. It wasn't actually charging.
Is it plugged in to charge via AC or USB? It might not be drawing enough power if it is charging through USB.
If it is charging though AC, have you left it to charge overnight? If a Li-ion battery enters a state of deep discharge, it may take a while for it to charge enough for the phone to be able to power on. This shouldn't be the case though, the battery should have failsafes to prevent this from happening.
If neither of these things do anything, I'd try either swapping the wall adaptor and/or the usb cable or the phone battery itself, and if those things work, you're out of luck.
Hope that helps.
Have tried two wall chargers different outlet and my two pcs. left it overnight twice. Im screwed lol
tyler24_11 said:
Have tried two wall chargers different outlet and my two pcs. left it overnight twice. Im screwed lol
Click to expand...
Click to collapse
Tell Rogers that one of their Sales Reps burnt the phone while trying to show you how to charge it
Im going to take it back to walmart it is only 3 week old
I had the same issue with mine... it completely died out and would not start charging. Found it weird the phone couldn't be charged while being powered off (my old KRZR could do it)....
Anyway, I called up Rogers and told them the situation and they exchanged it with a new one. I don't let the phone go below 5% now in fear of it not being able to charge if it the battery is completely drained XD
was your phone rooted?
No... it was on the original firmware and all...
For some reason I forgot you rooted it when you replied. Rogers might not want to exchange it... Wal-Mart on the other hand will probably not even look at it and just exchange it.
Other option could be to buy a new battery?
it actually looks as if the usb port itself is chipped.
ok, i had the same problem with my old SE phones.
everytime i tried to charge it, it did not charge. other phones were charging thru same cable.
the problem in the OS.
what i did is upgraded thru SEUS.
try to plug it to PC thru USB cable without battery. then go thru procedure as u would go for upgrade and then put the battery back.
it might not work if your battery complitely dead, thought worth a try
Yea, cant connect to seus
your batter yshould be fine. it's just dead.
dont buy any battery just yet. i would replace the phone if i were u. without spending extra bucks.
this is the quickets solution i can think of.
however, for the future reference i will buy me extra battery just in case
good luck
Just had it turn on and it said less than 2% remaining connect to charger. It was connected. This happened before and it just shuts off.
yeah mine would open from time to time but instantly shut down also. Seems like it didn't have enough time to detect it was plugged in...
try returning it
This may sound weird but it worked for me. Try taking out the memory card and leave it out and plugging it in.
Yea. I tried every combination. Brought it to walmart qndvthey gave me a new one. 30 day replacment woo. Im nervous to root now
Sent from my X10a using XDA App
same problem... no solution ?
Hi, I'm new to the forum and I found this topic is describing the same problem I have. I bought an x10 mini pro (U20a) unlocked and it doesnt turn on with my service provider SIM, but if I try another service provider SIM card or without SIM card, it turns on normally. It's the same behavior, cause it wont charge either. Other users are reporting the same problem in SE support forums and it is related to X10, X10 mini and X10 mini pro. It seems to be related to software since a factory reset or a repair using PC Companion solves the problem partially, but for some users the problem starts again when their batteries dries out and want to charge their phones. In case anyone find a solution that really works, please post it here.
Sent from my Motorola Milestone using XDA App
I'm disappointed because I have the exact same problem, but I'm outside of AT&T's 30-day return period (and they're being typical idiots about the issue). They have no replacement batteries (of course) so I've had to request one directly from SonyEricsson, which will take 5 business days to deliver. (!) Hopefully, this will resolve the issue; however, before you returned your phone to Walmart, I noticed that you thought you had a problem with a chipped mini-USB port. Do you know if that was part of the problem?