ExtUSB not working. No charging, no connection. - P3600 General

Hello everyone
I come to you for council and advice.
A month back before going do bed, i put my pda charging from a usb port on one of our pc's.
The orange light lit up.... so... i went to bed.
a few hours after, i got up... went to work with the pda with me... and noticed that there was no charge on it... (not more that it had before i put it to charge).
I tried to charge it when i got home... it didn't charge. I thought i might have damaged my normal charger... so i grab a usb cable... no charge... no connection to active sync.
I grabbed the PDA, and all of the box contents, go to the store where i bought it (Worten, in Portugal) e deliver the third PDA i had for warranty.
This was on 5/11/2007, early evening.
Today, day 6/12/2007 i got there... and they said they received a repair budget of 340 euros for a new mainboard, because due to hacking with WM6 i had lost the warranty.
First, i don't know if they can use this right. The warranty statement clearly defines they have 30 days to give me some info.. the first call they (tried) to make to me was after the 30 days completly gone by.
Second, 30 days to tell me i have NO WARRANTY?
Anyhow, anyone got some tip they can give me to try and solve this problem?

I have the same VERY BAD LUCK HERE P3600
Hello to all, like our friend daedric I have the same problem, the only diference was that when I tryied to do the "romupdateutility" recovery in the 1st step I didnt disconnected the cable in the 2nd step just removed the battery whait 3 seconds and place it back then When I press the Power Button nothing happend so since I bought in the same place that daedric and Unfortunly the rom that I have in it is not the Original Warranty rom so if any one has something that I can do to resolve this issue please HELP.

Related

My is Wizard Dead. Please help

I got a used wizard today,it is a few weeks old I also got a cradle with it.
I pluged in the cradle to the USB port and the charger to power, after playing with it for 1-2 hours I placed the wizard on the cradle to charge and after a few mins i noticed that it was over heating. I removed it from the cradle right away and noticed that the battery was droping 1% every minute or so. After it was down to 27% i removed the charger and left only the usb connection and placed the wizard on the cradle again. it was charging fine, when it was up to 90% removed it from the cradle and again was droping fast.
When it was down to around 25-30% of the battery I did a soft reset and since then I can never get it to start again also the red charging light does not show.
What the heck is wrong with it? I also get a light burning smell from the bottom of the wizard where the connector is located.
Any help?
I need your lights guys.
Don't like the sound of the light burning smell, that sounds like an electrical fault. It looks like your battery has died and the wizard battery setup is well known to do this. You need to plug it into the official mains charger (not the usb one) as this has an output of 1A, enough to kick start the wizard battery into life and start the charging. You need to wait a short while though before the light comes on. If this fails try to get a new battery and try that. Any more light burning smells and it needs to go back to the supplier.
I would suggest that you send it back to replace/repair. The rapid dropping of the battery power suggest that it is using power somewhere (illegally). I've heard cases of battery caught on fire, etc. and I won't suggest you to use it anymore until you sort out the 'burning' smell.
First of all thanks for your replys.
I pluged the charger on it and the red charging light came on after a while.
charged for over 6 hours and its still red? I think after been charged should change to green? right?
anyways after all that still doesnt want to turn on. I got it to start a couple of times but only to the point that shows the splash screen with the rom numbers and then it turns back off.
Should I give it a smash across the room on the wall? done that with some other things and worked just kiding.
Forgot to add that up to the point when i did the soft reset the device was working fine except the charge drop. Soft reset was done while it was working ( turned on)..... if thats any help.
i thinking u need flash phone with jafwm
and here u will find 3 flashs
www.gsm-support.info
fonec said:
i thinking u need flash phone with jafwm
and here u will find 3 flashs
www.gsm-support.info
Click to expand...
Click to collapse
That ain't gonna do jack sh1t to it. If it can't start to get into bootloader, it can't flash....and it's not a flash issue.
Usually the red light means power but not charging - happens to my qtek 9100 when I let it get too flat and I have to remove and insert the battery while the mains adaptor is attached - others have to 'jump start' the battery by directly connecting to a PSU - I wouldn't do this with yours.
From what you have said it sounds like a short somewhere. Any signs of water damage? Warranty? What Wizard do you have and what country are you in?
Richard
I got the wiza 200 O2 xda mini S from a guy in UK from ebay. The idiot sold me a cradle for it with an adaptor that says 12V on it (Like an idiot that I am i just noticed that) but then again how am I supposed to think that he gave me an adaptor that its not made for it when it says on the back of it "for Imate - Kjam". Do you guys think thats what burned the **** out of the unit ?
dont forget that some times turns on shows the ROMS numbers and turns off.
No water damage... I think its on warranty... I live in Greece.
Might not be the cradle - it could be it steps down internally to 5v. Use a meter and check what it outputs to the phone. Warranty with XDA's are 2 years to the *original* purchaser. As they are only supplied with an airtime agreement then that isn't you.
Richard
have you tried changing batteries to a new one? Seriously, thats the easiest thing you could do right now and you could actually get results.
Ok this is what I did.
Removed the baterry from the device,
got a 12V 1 Amp power supply that I had lying around and give it a few shots connecting it to the battery giving it an electro shock.
(If you're going to try this be very carefull.<<<< DONT LEAVE the power supply connected to the battery>>>> just give it a few shots 1 second on and off.
That was it.
It started working, device turned on and now its charging (I think) yellow light is on.
I'm going to leave it on for a few hours and see what happens.
Wish me good luck. I'll let you know soon.
ok... this is what happend.
Battery is drained and its not charging due to a blown fust on the main board.
I open the phone and placed and solder a little wire over the fuse.
Still does not charge. ^%$#%$#$^%$*
Before I replaced the fuse or should i say short it the yellow light would come on for a few min and then red again. Now when I charge the battery with another external power supply the pda comes on for a few mins and then dies again. ( no charging light whatsoever).
Does anyone know where to get a mainboard for it and about how much it costs?
Asking for help again.
SmartMan said:
ok... this is what happend.
Battery is drained and its not charging due to a blown fust on the main board.
I open the phone and placed and solder a little wire over the fuse.
Still does not charge. ^%$#%$#$^%$*
Before I replaced the fuse or should i say short it the yellow light would come on for a few min and then red again. Now when I charge the battery with another external power supply the pda comes on for a few mins and then dies again. ( no charging light whatsoever).
Does anyone know where to get a mainboard for it and about how much it costs?
Asking for help again.
Click to expand...
Click to collapse
Hey man, sorry to hear about that.
The best you can do is to claim your money from ebay.
You probably killed it when you pluged in the 12V PSU. That's 230% of the normal Volts! Otherwise sell it for parts.
I'm in the process of claiming the money back from the IDIOT that sold it to me.
Lets see if that part of Ebay works as good.
SmartMan said:
I'm in the process of claiming the money back from the IDIOT that sold it to me.
Lets see if that part of Ebay works as good.
Click to expand...
Click to collapse
Doubt it. Did you ask the seller for help before opening the phone and voiding the original warranty on the device?
SmartMan said:
ok... this is what happend.
I open the phone and placed and solder a little wire over the fuse.
Click to expand...
Click to collapse
Not a good idea IMO as now the blame is on you as previously he may have been able to get warranty service from the original vendor.
Richard
I did ask.
He is not the original buyer.
what was I suposed to do.... track back 2-3 buyers to find the original... send it to him so he can have it repaired? Anyway it was out of warranty because of the burned fuse that says that some other charger was used with it.
I had a similar thing happen but fortunately not as bad as yours. Twice now my battery has mysteriously drained completely. The last time when I tried to turn the unit on, it flashed the boot screen for a couple of seconds then poof, no more juice. When I plugged it into the USB port, nothing, no lights, no charge, no recognition from Activesync, I thought the unit was fried. I use Tmobile and got to admit they did send me a replacement fairly quickly. Before I packed up my unit I thought maybe I should plug it in using the wall charger and presto, it came on and is working fine. I have no idea what causes this but do know that if the battery is completely discharged the USB port can not over come this to put a charge on.
Same thing happened to me, kind of strange though. The charge was perhaps 70% to the best of my knowledge. I flashed it with Mr. Clean ROM and booted it up.. it came in fine into WM5, then it started the installation of the 3 progs or whatever comes with Mr. Clean.. after the second finished the unit just died *poff*. Screen blank, no responce to power buttons or any other buttons for that matter.
I've tried taking out the battery for different intervals of time, no luck. I've tried using the AC charger, no luck. No lights, sounds, telepathy or matrix ****.. it just lies there like a dummy phone.. hmm what to do. Bought it from a guy in UK (im in sweden) on eBay, don't think I will have much luck there.. even though it's brand new...
Any thouhgts?
I have had this problem - I bought a replacement battery and all is now fine. Another thread in this group states that the battery cannot charge without the OS up - so if the battery is completely discharged then it is impossible to charge through the phone. The only solution seems to be somehow to charge the battery directly - as appears to have been done earlier in this thread.
Chris
p.s. if anyone knows of another way to do it I'd be interested to hear as I'd like to revive my old battery and keep it as a spare

Phone Does Not POWER ON

My Neo all of a sudden went blank since saturday.It so happened..
I wanted to make a call, I removed my NEO from POCKET and It just showed the GREEN LED BLINKKING the POWER button dint responded at all..
I had to reset the NEO and now its not showing any thing
Does not respond to the wall charger nor any LED only thing happen is the phone gets heated on Charging(as usual as it did earlier)
Does any one know the trick of stripping the wall charger and than short the pins ...
Which is the 1st Pin from bottom or from top..
Or ANY OTHER ADVICE PLS HELP ME!!
Where could be the problem as this problem had occured earlier also i remember it was 07/07/07 and I was in office and same the neo went BLANK.
Lucky was I in the evening I went home plugged in the wall charger and it came to life in around 21~30minutes
Hope my NEO is back to life soon !!
Is it really nothing to worry about or shall I start looking for a new phone
Hi...
This same thing happened to my Neo a couple of days back...
here is the trick .. charge it till you see the green led light meaning it charged 100%
THEN keep the battery pack seperate from the phone.
meaning dismental it for a whole day (24 hrs) in a dry place ....
after a day the NEo will work....
my sure did...
rekcah said:
Hi...
This same thing happened to my Neo a couple of days back...
here is the trick .. charge it till you see the green led light meaning it charged 100%
THEN keep the battery pack seperate from the phone.
meaning dismental it for a whole day (24 hrs) in a dry place ....
after a day the NEo will work....
my sure did...
Click to expand...
Click to collapse
\\\
I had kept it to charge for the entire night yesterday,thatz around 7~6hrs
the LED does not turn GREEN at all..
I will try to remove the BATT for whole night today..
Any other trick meanwhile,
Also does any one know why does this happen firstly.
Is it because the processor just goes to DEEP SLEEP below 50MHz or there is a problem with IPL or some other stuipid thing
Mine is a G4.and had last installed the PDAViet Touch Flo v5
Any one els who can advice me on this.
Any one had the same error earlier!!
Well you might as well try with other battery. If the old one is not charging it might be dead... Have you tried measuring it?
Had Any One Faced Such A Problem!!
chavdar said:
Well you might as well try with other battery. If the old one is not charging it might be dead... Have you tried measuring it?
Click to expand...
Click to collapse
I had given it in repairs..
they informed me that even after installing the BATT prophet shows no sign..
I just dont understand what is the problem has any one els faced such a problem
Rip-prophet??
I just had a word with a service guy where I had given it for repairs!!
He informed me the problem has got notihng to do with the software aspect.
He confirmed its a hardware [email protected]@
Can any one recommed me where can I get the phone repaired in India>>Mumbai..
I Think I will buy a CHEAP nokia now as I dont have enough money to spend again on a expensive phone like this one!!
I feel that the processor has gone in a deep sleep any ways to retrive it to 195Mhz...
Or is it the problem with the IPL/SPL
pls HELP and pray for My PROPHET for its LONG LIFE
Its been almost 15days now and still my neo is not working..
The repaires guy told me that may be something is gone wrong mainly because I had dropped the phone from my hand some 5~10days back before it went DEAD.
Can u guys tell me how manny of u have LOST their PDA phone s after it failed to repair..with the reason for the failure like short circuit or just like mine!!
Can any one help me with the service manual for prophet
I dont know how true is this ...
What if i m not able to get it repaired at all here in Mumbai>>INDIA..
Any one can help me with the board of neo or some solution in repairs..
I feel that the PDA manufacturers must atleast make the phones RIGID or shock proof just like nokia..so it can take some jerk!!and we dont have to LOOSE our valuable phones..
I m afraid but I dont think I shall ever buy a PDA phone again...mainly because its too much expensive for their limited LIFE SPAN just like in my case..
Hey Mate,
When I first got my prophet, it did the same thing, no lights, nothing. I had the battery replaced with an NON-OFFICIAL prophet battery (i.e, A cheap unbranded one), and it went - it's running perfectly now too with WM6
owenw said:
Hey Mate,
When I first got my prophet, it did the same thing, no lights, nothing. I had the battery replaced with an NON-OFFICIAL prophet battery (i.e, A cheap unbranded one), and it went - it's running perfectly now too with WM6
Click to expand...
Click to collapse
Hey buddy thx
I shall surely try with a new batt..
fing crossed.
Any progress on this???
i ja sam zakucao svog.. .
pozdrav iz "susjednog" zg-a futogu...
anyone figuired this out? my phone is dead too, i lost my charger a few days ago and i've been charging it with my laptop, until a few days where it ran out of juice, when i plugged it back in, it never turned out, im tried leavign it plugged in for 24 hrs, tried other adapters, kept the battery out..etc
nothingg!! Helpppp

Battery or device dead? Any chance for my G4?

Hi guys!
I had some hardware related problems last week with my wizard (G3). I sent it to vodafone and got a new device. The new device is a G4-Model, so I vistited the Wizard G4 forum to check out how to flash new roms to G4 models.
I flashed my wizard with the shelltool and got some problems while upgrading. My taskmanager said that shelltool doesn't respond anymore. I waited one hour and took the phone off the usb-cable, hard-reset the phone and everything was working fine (thought so).
After the setup i noticed that the battery was pretty low. I think it was about 7% or something like that. I put my wizard on charge via the usb-cable. I took it off the cable when the battery showed 27% because I wanted to go out.
After being away from home for 15 minutes the battery was down to 12%. I think about 15 minutes later the device was off - completely.
When I was back home at night, I put the wizard on the wall charger and went to bed.
This morning I noticed that the RED LED was constantly on... I was surprised that the led wasn't green, because normally it should be green after 5 hours of charging. I tried to turn my device on - nothing!
SteRo tells in this thread what to do, when the battery wont charge anymore. I tried it and this and till now it didn't work. I'm trying this at the moment one more time.
Is anyone out there who had the same problem or has an idea what happened and what i can do right now?
Please xda, help me!
Vi
EDIT: unimportant
What a beautiful day I tried the "direct" charge method from SteRo again and this time it worked! My wizard booted up normal and the orange LED started to shine
XDA - I LOVE YOU
Have a nice weekend!
EDIT2:
What a ****in day -.-'
Just checked my wizard for the charge status... guess what? it's off!
I have no idea what's going on... Please help me!
I trhink I would send that one back too since they just sent it to you. It's probably just a faulty battery though.
I had this thought too, but the problem is, that I have a WM6 rom on the device and I think that I've no chance to get back to a wm5 rom. Would you send it back immediately or qould you ask for help in a provider shop?
Thanks, Vi

Samsung focus will not recharge?

So.. I have been spending more time with my hd desire.... but I had some major issues with my new focus. It froze on me once or twice (windows ) and it randomly restarted.... but the most troubling aspect is it is not charging.... the first day I had it... I left it on the usb cord... the ENTIRE night.... it did not charge at all?!!
So last night, I did a reset and tried a wall charge... nothing... then I did a FULL format/hard reset and back into the wall overnight.... now it is at 40%
what gives? I know no phone could take 28 hours to charge? Any ideas or suggestions would be greatly appreciated... I tried the battery pull, restarting etc
thx
update: I called samsung and they said take it in to my carrier, they will send it out? Rogers does not know anything about these phones yet?
Return the phone and get a new replacement while you can. Obviously a hardware defect. If you wait past 30 days, you will have to settle with refurbs for your warranty replacement.
I bought it from Ontario but I live in Winnipeg, they said I had to bring it back to the orignal store for replacement... and there are no focus here.... pretty lame so far!
hahaha, rogers says I did not buy it from them.... the imei # does not match, so I have to go through samsung, samsung says they do NOT repair or exchange phones and I have to go through rogers or the store of purchse.... which is not possible, cheaper to buy another phone then fly to ontario
samsung is crap, never again.
If you did actually buy it from a Rogers store and you have a receipt to prove it, then you can contact customer service and speak to a supervisor. They will arrange for you to ship it to them and they will ship you back a new unit.
So, for all of you that has a normal working phone... any freezes/issues? I am guessing all my problems were from some hardware issue
I liked typing on the phone....
Mr.Kakarot said:
So.. I have been spending more time with my hd desire.... but I had some major issues with my new focus. It froze on me once or twice (windows ) and it randomly restarted.... but the most troubling aspect is it is not charging.... the first day I had it... I left it on the usb cord... the ENTIRE night.... it did not charge at all?!!
So last night, I did a reset and tried a wall charge... nothing... then I did a FULL format/hard reset and back into the wall overnight.... now it is at 40%
what gives? I know no phone could take 28 hours to charge? Any ideas or suggestions would be greatly appreciated... I tried the battery pull, restarting etc
thx
update: I called samsung and they said take it in to my carrier, they will send it out? Rogers does not know anything about these phones yet?
Click to expand...
Click to collapse
I had this exact problem with my phone the first few days I had it.. let it charge over night and it still showed an empty battery and gave me the warning beep every few minutes.. i was about to take it back to the store to replace it when i came across a set of instructions for entering diagnostic mode and listing the battery details (sorry i forget the exact sequence of keys but you should find it on here). All of the battery details were 0 or none which confirmed there was an issue.. after exiting this diagnostic mode the battery started registering correctly.. no problems since..
tbowman said:
I had this exact problem with my phone the first few days I had it.. let it charge over night and it still showed an empty battery and gave me the warning beep every few minutes.. i was about to take it back to the store to replace it when i came across a set of instructions for entering diagnostic mode and listing the battery details (sorry i forget the exact sequence of keys but you should find it on here). All of the battery details were 0 or none which confirmed there was an issue.. after exiting this diagnostic mode the battery started registering correctly.. no problems since..
Click to expand...
Click to collapse
wish I seen this before I sent it back, Hhahaha, I will have my friend try it out... thx
Bad USB Cable?
I wonder if it was just a bad USB cable?
Charging the phone by USB to PC is CRAP! I tried to charge it that way over an afternoon, and the charge meter barely moved. Switched to using the wall plug, and the battery charged fairly quickly.
D
I tried the wall charger for 12 hours..... tried it all.... thx
Sent from my Desire HD using XDA App
update: I went to lunch with a friend... he was late, so I went into a rogers plus store... she had 1 in stock... so I bought it, brand new, sealed $671.... yesterday I did my best to kill the phone, now... 3 hours later the phone is not charging at all and I had to pull the battery, just like my used one.... so now, after the battery pull and being plugged into the wall charger... it just has the battery symbol with the plug on it.....
If I can get into the phone, i will try the dianostic thing, but seriously? wtf, but now I have the receipt... and a 15 day return policy.... but come on, I just want a windows 7 phone that works?
did the battery thing.... lots going on over the 3 pages... not sure what I was looking for... although, I seen the battery go from 1 to 2... maybe it is charging now.... will update soon, but this is pretty weird for a brand new phone?
** did a soft reset, battery pull... charged for awhile... still not moving, I go into the battery thing again... now it says 10%.... so I get out of there and see some battery charge.... but it has been on there for awhile and has not moved... so I go back in, now it says 29%.... screwy stuff, I will see what it says after being on the wall charger all night.

Unable to boot up, Red light when charging issue

I have been unable to boot up my letv 1s device, I have tried everything listed on this forum and other forum to boot up my letv device. Including removing the battery and reconnect them back again.
Recently, I tried to repair it to local phone repair shop, they told me it needs a battery replacement. I bought the battery from aliexpress and replaced them, but it still doesnt boot up.
The repair shop gave up and gave me back the phone and told me the EMMC is weak (I'm not sure about this).
I disassembly the phones and try to figure out the problem, I am guessing the problem might be with the charging board, I am posting the video here hoping someone pro could help me solve the problem. I'm guessing its the charging board because everytime I connect the device to the PC, it kept reconnecting when I tried to FLash a new ROM.
Here are the video of the board kept reconnecting when I tried to connect them to PC
youtube(dot)com/watch?v=N8PMQej9BQc
youtube(dot)com/watch?v=GfLOrslXYRE
Here is the picture of the charging module board
ae01.alicdn(dot)com/kf/UT810zNXElXXXagOFbXw/Letv-X500-USB-Module-Plug-Charge-Board-Microphone-Module-Flex-Cable-Dock-Connector-For-Letv-1S.jpg_640x640.jpg
I really hope someone with more experience could give me more insight about this, thanks.
PS: Please dont ask me to charge the phone again with original adapter and cable, because thats the first thing I tried and I charge it for more than 24 hours already (I even tried to buy a new adapter and usb type-c cable). Oh and I tried connecting to PC with the battery connected also, and it kept reconnecting.
Hi, I also have same problem, but still no solution.
Hi @casper2201 , @softkans and any one with the same issue,
I too had the same issue. It started with the charging rate becoming too slow (1% increment in 25 minutes of charging). I switched off the phone and left to charge for around 35 hours straight and came to find it 79% charged. Then I tried flashing the LOS14 after LOS13 ROMs but in vain. I also fiddled with the Kernel Adiutor, still no help. The charge won't increase when the phone is on so I left it to discharge until it switched off. Then the main issue showed up with red light always on when charging and blank screen.
I also posted about it here, but no one replied. Then I took a leap of faith and went to a local repair shop. He confirmed that it was a hardware problem and the charging module needs to be replaced. Just now I am coming from the shop itself after picking up my phone. Its working fine till now *fingers crossed*. He charged me ₹1300 ($20) which is a little high for the service but it doesn't matter as he was the only one ready to open it as there was the risk of cracking the screen.
So, summing it up, if you have the same problem as that of mine then you need to replace your charging module and I think it will be fine.
Charging module replaced.
Current condition of phone.
The rubber bands will help the adhesive strengthen.
Thanks,
Abhishek
abitshek said:
Hi @casper2201 , @softkans and any one with the same issue,
I too had the same issue. It started with the charging rate becoming too slow (1% increment in 25 minutes of charging). I switched off the phone and left to charge for around 35 hours straight and came to find it 79% charged. Then I tried flashing the LOS14 after LOS13 ROMs but in vain. I also fiddled with the Kernel Adiutor, still no help. The charge won't increase when the phone is on so I left it to discharge until it switched off. Then the main issue showed up with red light always on when charging and blank screen.
I also posted about it here, but no one replied. Then I took a leap of faith and went to a local repair shop. He confirmed that it was a hardware problem and the charging module needs to be replaced. Just now I am coming from the shop itself after picking up my phone. Its working fine till now *fingers crossed*. He charged me ₹1300 ($20) which is a little high for the service but it doesn't matter as he was the only one ready to open it as there was the risk of cracking the screen.
So, summing it up, if you have the same problem as that of mine then you need to replace your charging module and I think it will be fine.
Charging module replaced.
Current condition of phone.
The rubber bands will help the adhesive strengthen.
Thanks,
Abhishek
Click to expand...
Click to collapse
Thank you Abhishek,
Thanks for your reply. I will check it with local service shop.
UPDATE: The problem still persists.
softkans said:
Hi, I also have same problem, but still no solution.
Click to expand...
Click to collapse
Yesterday when I was done with setting up my phone, I put it to charge and the same issue has come again. Its not charging and the "Red light of Death" is back. Today I'm going to the repair shop again and see what he can do now.
I think this is the end and there is no point throwing away more money on the device anymore.
abitshek said:
Yesterday when I was done with setting up my phone, I put it to charge and the same issue has come again. Its not charging and the "Red light of Death" is back. Today I'm going to the repair shop again and see what he can do now.
I think this is the end and there is no point throwing away more money on the device anymore.
Click to expand...
Click to collapse
Is those issue solved? Any update?
Have you tries spft.
casper2201 said:
I have been unable to boot up my letv 1s device, I have tried everything listed on this forum and other forum to boot up my letv device. Including removing the battery and reconnect them back again.
Recently, I tried to repair it to local phone repair shop, they told me it needs a battery replacement. I bought the battery from aliexpress and replaced them, but it still doesnt boot up.
The repair shop gave up and gave me back the phone and told me the EMMC is weak (I'm not sure about this).
I disassembly the phones and try to figure out the problem, I am guessing the problem might be with the charging board, I am posting the video here hoping someone pro could help me solve the problem. I'm guessing its the charging board because everytime I connect the device to the PC, it kept reconnecting when I tried to FLash a new ROM.
Here are the video of the board kept reconnecting when I tried to connect them to PC
youtube(dot)com/watch?v=N8PMQej9BQc
youtube(dot)com/watch?v=GfLOrslXYRE
Here is the picture of the charging module board
ae01.alicdn(dot)com/kf/UT810zNXElXXXagOFbXw/Letv-X500-USB-Module-Plug-Charge-Board-Microphone-Module-Flex-Cable-Dock-Connector-For-Letv-1S.jpg_640x640.jpg
I really hope someone with more experience could give me more insight about this, thanks.
PS: Please dont ask me to charge the phone again with original adapter and cable, because thats the first thing I tried and I charge it for more than 24 hours already (I even tried to buy a new adapter and usb type-c cable). Oh and I tried connecting to PC with the battery connected also, and it kept reconnecting.
Click to expand...
Click to collapse
SP flash tool ,may be your device got hard bricked . in hard brick ,decice just dont do anything at all ,but show red light on charging. i m no pro but if you havent tried it try it.
Open ur phone and look for the battery connector and reconnect it..
It worked for me. As my connector was loose
casper2201 said:
I have been unable to boot up my letv 1s device, I have tried everything listed on this forum and other forum to boot up my letv device. Including removing the battery and reconnect them back again.
Recently, I tried to repair it to local phone repair shop, they told me it needs a battery replacement. I bought the battery from aliexpress and replaced them, but it still doesnt boot up.
The repair shop gave up and gave me back the phone and told me the EMMC is weak (I'm not sure about this).
I disassembly the phones and try to figure out the problem, I am guessing the problem might be with the charging board, I am posting the video here hoping someone pro could help me solve the problem. I'm guessing its the charging board because everytime I connect the device to the PC, it kept reconnecting when I tried to FLash a new ROM.
Here are the video of the board kept reconnecting when I tried to connect them to PC
youtube(dot)com/watch?v=N8PMQej9BQc
youtube(dot)com/watch?v=GfLOrslXYRE
Here is the picture of the charging module board
ae01.alicdn(dot)com/kf/UT810zNXElXXXagOFbXw/Letv-X500-USB-Module-Plug-Charge-Board-Microphone-Module-Flex-Cable-Dock-Connector-For-Letv-1S.jpg_640x640.jpg
I really hope someone with more experience could give me more insight about this, thanks.
PS: Please dont ask me to charge the phone again with original adapter and cable, because thats the first thing I tried and I charge it for more than 24 hours already (I even tried to buy a new adapter and usb type-c cable). Oh and I tried connecting to PC with the battery connected also, and it kept reconnecting.
Click to expand...
Click to collapse
Sir same thing happened with me....phone is not charging red light alert and display blank...please suggest me what can I do
I want my data back from that and its not starting my data is really very important I can't loose that
Help me and tell me what can i do so that my data will not loose and my phone starts
Remove display and disconnect battery. If it won't be alive again that's probably power management unit problem and you won't fix that way.

Categories

Resources