on the top off the touchscreen ,it writing usb , on the botton is v 1.06
and now i can do notthing more . someone pls help
if you having some kind of software to fix it pls send
thank so much to you all
:!: :!: :!: :!:
ed,
No worries,
Just restart the whole procedure.
I got this too.
I will work.
thank
sorry but it not working
do you have new rom update
can you pls send for me
:?: :?: :!: :!:
you sure?
Based on your info youre stuck in the bootloader . . .
With me just putting the MDAII back in the USB cradle (dont use any splitters/hubs or whatever to connect it to your pc), restarting the himaupdate.exe and being patient did the trick.
If that does not work, I am afraid you will have to search this forum a bit more. I have no experience with your current situation.
Related
I have qtek2020i and i tried to update it with some himalaya rom. So now my device is death. Could somebody please help me to find any rom for qtek 2020i that will help me to revive my device to start working again. Tnanks in advance
Marko
[email protected]
Re: Rom for 2020i
Hi,
This post has the info you need.
http://forum.xda-developers.com/viewtopic.php?t=27676
still not working
Thanks for help I downloaded both files ant tried with mautupgrade_noid twice as it says but still get a probblem with upgrade starting. When stage1 of upgrading starts with "erasing old ro" it stays on 0% and don't want to start erasing. after few minutes show error and says reset and repete. Is there any help or experiance. My qtek 2020i stills dead
fine
I did solve my problem with few trials with maupgrade_noid from magicians ftp site. Thank You a lot onse again for the help
Marko
It was a pleasure to help, glad your PDA is working again. Makes you sweat when you hold an expensive dead lump of metal.... LOL :lol:
DAz
Hi all,
please help someone if you can.
Have Regular UK MDA PRO.
Tried to do the UNI_Qtek_WWE_11364_151_10300_Ship ROM Upgrade
But got stuck at the country code part.
Now my Pro is stuck on the T-Mobile Splash Screen - the one listing the Model Versions -
R. 1.00.02
G 42.33.P8
D 1.12.42 WWE
It will not progress past this point.
I found out I can access the boot loader screen by resetting with the power light as well but I don't know what of the 3 options I get can help me . . I get these options:
Boot Options:
Enable KITL
Clean Registry Hive
Format Storage
Should I activate some of these? please help - if my Mrs finds out I screwed my new fone I am Dead!
Cheers & please help!
Mummy!!!!!
lr :!:
Trying to keep calm here with my blank screen but can someone help?
many thanks!
lr
I wish I could help (I was at the same ssituation once), but I have a JasJar and your bootloader seems to be different than mine.
But try posting for help on the Universal Upgrades forum. That's where all kinds of rom updates are discussed.
I will mate - thanks for ya help.
I am still stuck and none the wiser for all my research . . . I can get to Bootloader but get stuck therer- whitescreening on clicking the thumbpad button.
is it possible to get some files onto an SD and get bootloader to pick them up from there.
please please help I am desperate over here.
cheers
Great.
I am stuck with a brick.
£350 down the crapper
You could send it to THC Europe at http://www.htceurope.com/ they may charge a small amount to reflash your device
Edit: I think they will cover you if you have a MDA Pro, just try to enter the IMEI at http://www.htceurope.com/Wizard.aspx
Jah, thx mate if it comes to it I will use the link . . .
little rock!
Are you still within your first 28 days of purchase? If so then just take it back to the shop and exchange it for free!
no think i am outside of that now - but i will ring em up and ssee what they offer . . .
it's crap without a fone / pda u know
cheers meat.
Can someone help me on my imate sp3i
I did HARD RESET and somehow it stoped in half and now i can not open it on Windows and i can not update with a new rom,
anyone would like to help me ....
waiting for answer. ( [email protected])
have a nice day
try to flash via bootloader
1. put your device in bootloader
2. flash using Patched_RUU
If you dont mind to tell me step by step because this is all new to me.
And where do i get the PATCH..
thanks for answering
Hello, I have put my pda hw6910 in test mode, on the screen:
SERIAL
HP
VG.39
And now not as(like) extracting it, I have tried an erased(smeared) general but nothing, it(he,she) returns again(afresh): (some help?
On the hw6915 I leaved serial mode through "hard reset" (Red_Phone+Green_Phone+On/Off+Reset)
-varix-
Already I have tried(meant) it and it does not work
please help, dont work hard reset, CLEANING OK, and enter serial
help please,
Fix
Hi put the ppc in the base and execute the program uni_exitbootloader
dont work any solution?
just reflash
reflash your device (it can be done in test mode too...)
umph.. if you do not have nbf files then it could be difficult...
is vodafone uk ipaq 6910, in hp dont have flash for vodafone ipaq, and the vodafone page, Neither.
in hp i have the hw6910 but for free ipaq, not for vodafone, and say error in ID
heeeelp
Why not just call HP support? Just hang up some lame story that it 'just' happened.
Unless the phone is stolen, this shouldn't be a problem, and if it is, you don't deserve to be helpen .
Thanks
Wow, I really love this forum. I always find the solution here.
Getting out of the bootload screen worked:
(vchumacero)
Fix
Hi put the ppc in the base and execute the program uni_exitbootloader
vchumacero is the best
vchumacero
thanks man , you made my phone work again , thanks thanks thanks
you are realy expert bro
HP 6910 problem
screem hp
logo hp
vG. 39
i make reset hard and reset soft, not start
download uni_exitbootloader
problem not conneted usb
please help me!!!!
Is any can made hw6910 to WM6.1 or 6.5```
I have exhausted all local failed to find!
Any one help`
thanks!
deadlock1981 said:
Why not just call HP support? Just hang up some lame story that it 'just' happened.
Unless the phone is stolen, this shouldn't be a problem, and if it is, you don't deserve to be helpen .
Click to expand...
Click to collapse
wow this was very helpful for me. i did just what you told me and BAM! it worked! thanks
- its one thing to be stupid, its another thing to spread it
hey guys weird thing has happnd to my JasJar firstly the screen is crashed so i cud barel seen anything in dark but thru sunlight i cud see things on my phone
later i installed a rom from here i dont remember wich one it dont get start up it just stucks up at imate screen (that blue color 1) it doesnt go further from that
and no response from my phone pls help as i dont have any mobile right now ... pls help me out guys.. cud i ever make my JasJar live again??? i wish if the phone was on to install the original rom from the webstie or any rom from here to make it work ......
thnks and hoping for a good reply.. fingers crossed...
drift_amit said:
thnks and hoping for a good reply.. fingers crossed...
Click to expand...
Click to collapse
First of all welcome to the forum... and it's not a big deal and for sure your JASJAR will be rocking... ok did you try to flash the rom in XP(it's more easier) did you follow all the steps properly ... if yes try docformat and install another rom... and see wiki for additional informations and instructions....
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
cheers
Rajiv
thnx dude.. but for this my JasJar must b detected by my pc... and i had used it in Xp earlier and now i have vista Installed (any big deal ??)
now while upgrading again wud make it in working???
Yes you can flash in vista
do a search and you´ll find the way!!
http://forum.xda-developers.com/showthread.php?t=313001&highlight=flashing+vista
sorry but my device just restarts( i mean just comes back to splash screen where i can see only imate and the rgd versions) when i try to enter the bootloader mode.. plss help me out guys
drift_amit said:
sorry but my device just restarts( i mean just comes back to splash screen where i can see only imate and the rgd versions) when i try to enter the bootloader mode.. plss help me out guys
Click to expand...
Click to collapse
Ok press the backlight button and power button.. and after that press reset button but still holding both buttons ( backlight & power)... try it few times and you'll succeed... and one more think press the backlight button only and power button only to check if they are working correctly or not ....
Cheers
Rajiv
ok.. now.. by reading other forums and formatting tips of Universal on Vista ... and all other wiki information the original imate rom from the website.. damn it is installing now.,.. and my fingers are crossed .. it is installing and am waiting to finish it