Hi there!
First, sorry for my worst english, but i'm not to perfect there ;-)
Now to my problem:
I've get the O2-XDA1 last week and there was only old ROM-versions installed.
So, i've seen the Radiostackupdate at the O2-Page and tryed to installed them.
But this update failed at 10% with the reason "Fehler beim beschreiben des Flashspeichers. Drücken Sie "OK" um neuzustarten"/"Failed writing into flashram - click "ok" to restart the device".
After the forced restart the update hangs at 1% - everytime!
Now no radiosoftware would detect - and the device didn't found the insert accu.
Well, then i've done a flash from CE via wallaby bootloader, but the problem stand by. :-(
I tested to flash the T-Mobile ROM, but that fails - after 1%, too.
After an idea I only copied the RSUpgrade.exe to the device and start them.
Result: The Tool starts without errors and after 1% the same message "Retry again".
So I think, the upgradetools try to delete the existing radiostack first - but there is no existing version at my ROM - and so the installation from the new Radiostack don't functionally.
What can I do to write the GSM-ROM to my XDA?
I'm using Windows XP (desktop) and i've only a USB-Cradle - no serial.
Thanks for reading and i hope for helpfully answers.
Greetings from Germany,
Christopher
Re: After Radiostackupdate - Device death. Reinstall RS fail
Cool you have the same problem as me, last week i tried to install new radiostack, and the result is like you. Help Us, There are a lot of us
@Long:
Well,
it's definitely not the way you would decide (for me not, too!), but after a week full of searching, trying and no results, i've send my XDA to the customer service.
It's fool: So many users had this problem, but no possibillity to re-alive the XDA exists... :-(
I hope that a failed radiostack didn't kill my warranty - that were fool... :-/
Well, I would see.
If there any possibilitys to rescue the X/MDA (1), so please post them! Now i can't do anything, but for example i need them in future.
Greets and thanks,
Christopher
Me too, I stand in the line with you.
The good news is that if a service center can repair it then it will not be long before one of the great guys here will figure it up, I can feel that they take these problems as a challenge that they must win.
Related
Hi developers,
first of all I'd like thank you for your excellent work. I used a couple of roms and really appreciate your efforts.
This time I updated my device from WM 2003 (4.00.01 ENG, Radio 4.21.00) to the T-Mobile release whitout radio update, posted in this forum by Aurora13. After a backup of my data and removement of the T-Mob. stuff like suggested by Aurora13, I noticed that my backlight was turned of and I couldn't turn it on again either.
So I tried to downgrade again, because working without backlight really is a pain, by I'm unable to.
Not depending on which ROM I use, I get the message: "error getting device data" (CMD.exe) & "execute remote communication program error" (prog. a 1.09).
My active sync (WinXP) seems to work.
The device & telefone seems to work either.
How can I fix this?? Any suggestions?? I'd really like to go back to 4.00.01!!!!
Thanks in advance!!!
If you restored your applications from a former version of WME 2003 you will see this happen. I don't know what registry setting or file is getting changed but after a restore from say 4.00.01 or 4.00.05 backups (I use SPrite Backup) you will see this phenomenum occur after a soft reboot no backlight. Do a hard reset and resinstall your applications and all will work fine.
error in CMD.exe window after T-Mob 4.00.10 update
Hi developers,
I have similar problem, I’d like to go back to 4.00.005 too.
Using the ROMkitchen_4.00.05.exe, in the CMD.exe window I got an error message:
“error: GetConnectionType – An existing connection was forcibly closed by the remote host.
error getting connection”
My activesync seems to be working properly.
What has gone wrong? How do I fix it?
Thanks in advance
Experienced the same with the backlight.
So NEVER do a restore from a different ROM!!! Alway do a clean install.
error in CMD.exe window after T-Mob 4.00.10 update
Do a hard reset and resinstall your applications and all will work fine.
Click to expand...
Click to collapse
Always do a clean install.
Click to expand...
Click to collapse
So in plain words: how do I do that when this occurs during the flashing-procedure :
“error: GetConnectionType – An existing connection was forcibly closed by the remote host.
error getting connection”
Click to expand...
Click to collapse
It's not only the backlight, the problem is the "execute remote communication program error" which makes flashing the ROM impossible .
I used do update with *.exe-files which won't work out anymore :evil: . Can anybody post a step by step guide how to fix it and go back to the ROM before :? (Which would obviously be the best)?
Or does anybody know which registry key has to be changed to fix the backlight :idea: ?
Thanx!!!
Does it work OK after a hard reset?
Because you shouldn't have to go back, do a hard reset and do a clean install of your apps and 4.00.10 should work ok.
Thanx Aurora13,
it now seems to work !
I'm on 4.00.10 again with all the T-Mob. stuff and backlight working.
In my case, going back to 4.00.01 and restoring my backup seems to be less time consuming than doing a clean install (would loose adress book & calendar).
I actually can't spot a lot of differences besides the version numbers in the OS anyway :? .
:evil: But trying to do that, I still have the same problem with the cmd.exe:
“error: GetConnectionType – An existing connection was forcibly closed by the remote host.
error getting devicedata (cmd.exe)”
Click to expand...
Click to collapse
and
"execute remote communication program error" (prog. a 1.09).
Click to expand...
Click to collapse
:evil:
Seems to me like a serious bug that I can't flash my ROM with the USB-cradle anymore :x .
Anybody any suggestions how to get rid of this OS-version without SD-card-writer?? I'd really like to have evrything working again like it was before!
Thanks a lot in advance!!!
Most importantly: do not upgrade to a T-Mobile ROM 900/1900 MHz (American) ROM on anything but a 900/1900 MHz phone. The T-Mobile ROMS contain the RSU phone upgrade, which will run as soon as WinCE boots. You will ruin your 900/1800 (European/Asian) phone if you do.
Click to expand...
Click to collapse
Could that be the problem that I'm unable to fllash my ROM again?
You will ruin your 900/1800 (European/Asian) phone if you do.
Click to expand...
Click to collapse
What does that mean?
"What does that mean?"
i suspect it means that your xda will only work in US
untill you find some way to flash it back to the 900/1800 gsm mode
which is used in EU and much of the rest of the world [/quote]
untill you find some way to flash it back to the 900/1800 gsm mode which is used in EU and much of the rest of the world
Click to expand...
Click to collapse
Anybody know how to do that when unable to flash ROM due to
Quote:
“error: GetConnectionType – An existing connection was forcibly closed by the remote host.
error getting devicedata (cmd.exe)”
and
Quote:
"execute remote communication program error" (prog. a 1.09).
Click to expand...
Click to collapse
Only via XDArit?????????
if it can be flashed using the sd flash card and you have an sd flash card reader / writer for the pc it would be possible
Similar discussion going on here:
http://www.xda-developers.com/forum/viewtopic.php?t=2134
T-Mobile update 4.00.10 sucks!!!
@reiggue
4.00.10 does not suck.
The problems you are experiencing are not real problems but a lack of knowledge on your side.
If you asked how to solve them I can help you to solve EACH one. But you are not asking, but only being negative.
As with all ROMs if you don't know what you are doing, then don't do it.
If you read this forum more securely, you already got answers of a few of your problems:
- How to go back to an old ROM
- Removing the TMobile stuff
- Backup of previous version does not work
All the answers of the above and how to solve them you can find in this forum.
So use the knowledge of the people of this forum and don't be so negative.
I want to second Aurrora13's statement. Over and over in this forum it is stated that you should not attempt these ROM updates if you don't have an SD reader. Sometimes it is the only way to save your bacon (XDA)! If a user insists on ignoring sound advice, then he shouldn't complain about suffering the consequences.
In general, the more experienced users on this forum provide good advise and are more than willing to ehlp others. Personally, I think this forum is awsome!
We all know we are taking risks but being techno-junkies we jump in there trying to improve our XDA's and learn more about its capabilities and ways to improve it. I hope when the next majore WME phone becomes available (I'm hoping for the TI WANDA, though XDA II will probably be first) that we are able to do the same with it.
4.00.10 user wanted to revert back to old rom
You need to use SD card reader to revert back to older rom, Activesync doesn't work properly in windows, even you had sync with your windows.
I had the same problem before, but I found out this 4.00.10rom is more stable then others WM2003roms.
Please follow Aurora13 instruction,removing a few item under program/AIM -/Tmobile and if you have radio signal problem You might want to try to bootloader setting 900/1800 or 900/1900, it works for me.
This is my second time flashing v4.00.10 and I'm using XDA asian unit.
Good Luck.
:lol:
@Aurora13
You might be right in me being negative.
As I read through the forum, there are other people experiencing the same problems.
I think that people should be warned to use the 4.00.10 version instead of hyping it, because, you might agree on that, you loose the ability to go back to an old ROM via activesync, which is the most convenient procedure so far.
I didn't know that I lose this ability, especiallly after performing 4 successfull ROM-updates so far with ROM from this site. That in fact frustrated me.
I agree that the information provided in this forum should help restoring the old ROM.
To close this message, I'd like to thank everybody in this forum who contributes to help fools like me, obviously not knowing what they're doing! This forum is great and I don't want anybody to get the impression I'm blaming anybody else for my faults.
Thanx!
imho then buying a SD reader is a pretty good idea no matter what
they come in versions which read 6 or 7 different flash types so one can also read ones digi cams card if it's a different type
and they are only about 50$ or EUro or something like that
i'm sure getting 2->3 flash readers one of these days
@reiggue
Yep this forum rules big time.
If you check the Sticky thread:
http://xda-developers.com/forum/viewtopic.php?t=1624
There is already enough warnings for the 'beginner', that's why I didn't warn it can be dangerous.
But enough said, good luck with your downgrade and/or if you will stay with the 4.00.10 ROM I'll be glad to help solving some problems you may experience or talk you through the downgrade.
I appreciate your assistance, Aurora13!
Thanx! :lol:
For those of you in the UK - I bought an SD card reader (only reads SD and MMC cards) from PC World for only £6.99 - I've used it to change ROMS back and fourth several times on four XDA's without incident so far - I bought it after an activesync update (genuine O2 upgrade) went horribly wrong and trashed my XDA. I think that everyone "playing" with these ROMs should get one.
Hello there,
I have a MDA from T-Mobile germany PW10A2 with an RUU version which was probably 3-13-12-GER and a RSU which was probably T360.
I dowloaded 2 update files on the site of T-mobile germany:
http://www.t-mobile.de/shop/handy/1,4855,2963-_50-0-99,00.html
- t_mobile_mda_ppc_update_v3_19_03.exe
- t_mobile_mda_gsm_gprs_update_v3_23.exe
Since I wrotte them an Email, no answer, and the page has been cancelled.
What have I done:
- I installed the PPC 3.19.03 through Activesync: no problem
- I then installed the GSM GPRS update: once it started updating on my MDA at 10% it kept stucked. After 20 mn I decided to interrupt.
Since that day I have the white screen with the litle keyboard down right and that's about it.
My boot loader is V5.15. when it runs it displays "WAIT", and then "GSM ERROR"
As suggested in this Forum, I bought an SD Card, and a card reader writter, I wrote the RUU file NK.nbf contained in the downloaded .exe file from T-mobile. I flashed my room (proposed when I cold reseted the Wallaby) and then : NOTHING HAS CHANGED !!!
I tried again with a cooked Rom flashing a NK.nb1 file and... I got the ROMKitchen splash screen and... nothig else.
The display stays all white, you can read "this ROM was cooked in the ROM Kitchen" all on top af the screen and in the lower right side I still have the keyboard Icon.
Now I'm really worried !
Does any one have a suggestion ?...I believe my problem is realy serious.
Pascal
Hate to tell u that mate, but if your device can't be recognized by ActiveSync, then the only action is to get the device to be repaired by a specialized center or replaced.
However, check this topic carefully .. it might help
http://forum.xda-developers.com/viewtopic.php?t=4123
Good luck
Good news bad news
I have an SX56 with att, I had the same problem. rsupgrade failing at 1%, hard reset, and then the device white screned. First, downgrade the rom. Find the old update program, open it with winzip (or winrar) and you should be able to extract the rom image. get http://wiki.xda-developers.com/wiki/XDAtools place the rom on an sd, softboot while holding down the power button. the device will now offer you the option to load the rom from the sd, do so. once this is done the device should display the old roms ID. If this works, format the SD card, create a directory 2577 copy the program RSUpgrade and associated files, rename it as autoexec insert the card in the phone, and you should be able to reflash the RSU, if this fails.... time to break out the jtag header or be ready to send the unit in
My MDA is dead and buried
Thanks to both of you guys, for your concern.
I had actualy already tried your proposed solutions (I had found in this forum except yours rszasz).
My MDA is less than 2 years old and I took it to a T-mobile shop in germany (during a business trip). They're proposing either to repair it, or to replace it (The guarantee is still runing).
After having flashed a cooked a rom in the kitchen, I still had the same problem, so in the perspective to bring it back to a T-mobile store, I reflashed the faulty file I had downloaded on the T-mobile Web site.
I hoppe they won't find out and make any trouble.
I like this MDA so much, I don't remember how it was without it !
All the best
Pascal
Re: My MDA is dead and buried
Pewinski said:
Thanks to both of you guys, for your concern.
I had actualy already tried your proposed solutions (I had found in this forum except yours rszasz).
My MDA is less than 2 years old and I took it to a T-mobile shop in germany (during a business trip). They're proposing either to repair it, or to replace it (The guarantee is still runing).
Pascal
Click to expand...
Click to collapse
send the phone to me, I could repair for you!
Thank's but it's under guarantee and I get it repaired or a new one for nothing.
Best regards
in two day ago i post i cannot flash rom to 2003 but only 2002 that ok..
i repair infared and flash again ....now that's work for all of rom that kitchen have.....But now I have big problem to repair radio upgrade fail .... Help me please
At first I read this ...http://forum.xda-developers.com/viewtopic.php?t=4123&highlight=rsu+upgrade+error already but still cannot fix it pass 1%...upgrade fail
I have two model of my friends to repair
In first case.... I don't know version of radio this model before but i think may be he try to upgrade in 4.21. ...i test wallaby and That show gsm error on bootloader screen V5.17 .... I reset it and that show 3.14 and no radio...and g...then i press volume key until that show today screen...but no have start menu
That show blue color on top of screen ...but have owner name calendar and contact .... I cannot go to start menu coz cannot align sceen i try in 4-5 times but same...
I decide to flash rom to xda.ser12 by patch wallaby.... Finish.. cold reset...
It show front page of loader in xda-developers and 3.17.03 no s ..g same
But i can go to aligne screen and go to today screen....... I try to find Rsugrade.lnk and ...this
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUPgrade.exe
But cannot find .........????
I sync with pc..... That show screen in active sync... But cannot find...
I copy this file from pc
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUPgrade.exe
To card reader because i cannot sync with pc
I put a card in xda and copy 4 files to /windows ..... And run ... Rsupgrade.exe
That show ..radio stack upgrade but cannot pass 1% it's show fail press ok to reset ...
I try to do in same at 5 time and results is Same..... How can i do ... I don't know the way to pass 1%.....
2. In another model my friend he told me...
His O2 is rom 4.00.11ENG and Radio is 4.16
He want to upgrade to 4.21 .....
but he didn't up radio by use Program B to upgrade ...
He remove sim card and fully charge of battery.... And copy 4 files of Pc to xda by active sync ....
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUPgrade.exe
And he put out of cradle .. And go to start-file explorer and press rsugrade.exe
That make it go to radio stack upgrade screen.... 1%...5%....10%....and stop at half and hours.... He press softreset...and that show screen of ..test only not for sale..
4.00.11 but no have radio ...e press volume key to go today screen.... That ok. Not same as in one case that i wrote... He delete..
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUPgrade.exe
From O2 and reset..... Wait to go today screen..... And sync with Pc... Pass can sync with Pc... He copy 4 files from pc to xda by active sync... Put it of and ran...rsugrade.exe same...that i wrote cannot pass 1% same show upgrade fail press ok to reset and he try to do like this in 4 times but same result.....
I read this..... From this forum
lbazil wrote
Date: Thu Dec 11, 2003 03:32
I only have two things to add:
1. RSUpgrade _fails_ much more often without SIM card inside the phone;
2. Your battery should be fully charged (100%) before you start the upgrade, since if it does fail, the battery will stop charging, and the next time you attempt to upgrade, you may not be able to get past 1%, even if you have power adapter plugged in. If you happen to have another XDA, you could swap batteries, or use an extended battery, if you have one.
Good luck...
And MrDollyMaker wrote
I never do the RSUpgrade with a SIM in my phone.... Never failed unless I tried to do it with the EXE thing. But I do agree to make sure you have a full battery, but since it already is at the 1% error, you can charge it with the charger if you do not do anything when the error comes up. just let it sit and charge.
This mean i must charge battery in another and wait until show green led light in another O2 and swap battery to dead xda.... And ran rsupgrade.exe this way is make me pass 1% ????? Or not... I have no idea to repair it... Please somebody advice me to repair...
This is my trouble
1. Xda in first case can go to today screen and use pda.. But cannot sync with pc coz it's show cannot find .... And after try to another rom in 2002 or 2003...it hank and show blue color on top of screen ...but have owner name calendar and contact .... I cannot go to start menu coz cannot align screen ...but in xda-developers ser12 that mae me go to today screen and use file explorer
2.xda in second case can go to today screen,sync with pc,copy 4 files to xda by active sync but cannot pass ...1% i didn't flash os rom to another coz 4.00.11 can pass to today screen...
Please someone guide me to fix 2 dead xda for my best friends in my life.... I beg u..
Sorry to long story and very bad english...
And i hope for help ..... Best regard...
anybody ???????
any idea ? help me please
It looks like you have tried just about everything, rs 4.21 was the baddest of the bad when it was released, the tales of woe are endless where that radio stack is concerned. There is a person on this forum that can fix your xda but he lives in Canada and it may not be worth the trouble. I think his nickname is cgigate.
ok i will email to him or change mainboard
thx u for share idea i will email to him or decide to change mail board.... in my country a price of mailboard is ......1,150 us dollars.... that's expensive ? ........ last way i can do...
Re: ok i will email to him or change mainboard
[email protected] said:
thx u for share idea i will email to him or decide to change mail board.... in my country a price of mailboard is ......1,150 us dollars.... that's expensive ? ........ last way i can do...
Click to expand...
Click to collapse
Contact your dealer for the nearest repair centre. They will replace your radio with a new one using a special SD-card. This will work regardless of your current radio.
thx for reply me
but repsir center in my country is say only word... can't fix it u must change mainboard.... Dumb center........
now i can sync with pc
last try to flash rom in first case to 4.01.16 original roby t mobile....until finish i can go to today screen and align screen......and..can...sync dead xda in 1 case with pc...and copy 4 files to xda....run rsupgrade.exe...bad luck cannot pass 1% same in all lastest radio all of version
( asia,at&t,t-mobile)and when i flash back to another rom like a xda-developre ser 1.2 that cannot show align screen.... but jump to today screen without align screen ?.....and cannot sync to pc ...
i have 2 rom to bring me in today screen ...and use file explorer another rom except this make me hank on boot screen..//
1.xda-dev ser 1.2 cannot sycn
2.4.01.16 can sync but cannot pass 1% to upgrade
may be tomorrow i will trow it in a bin ....... thx for any reply
You need to replace the radio stack using a special SD-card, and your dealer (or a repair shop) should definitely be able to do this for you. This is the normal way for the service guys to do an upgrade, they won't rely on the USB sync to work.
I had the same thing happening to a friend of mine, and we got his device updated for free.
thx for reply
thx bamse ..... for reply but i think people in xda-dev.. so clever more than my repair center : (
hello all,
After spending some night to test on the xda1. I found that if your radio stack error, you can never get the radio stack fix in any way. So, don't try it because i waste your time. We can only fix it when we have the sc card radio stack fix by using the bootloader. (there is no way to fix it in window)
SX56 GSM ERROR YOU CAN FIX IT
In Some cases, you can fix this yourself, read this thread (last line of this post links to it), and try my solution, or PM me and I will make arrangements to fix it for you.
Too many people are getting this error, SIEMENS only wants your money, everyone is looking for an answer. It took some time, but I fixed mine, and I'll help anyone who needs it do the same for their SX56.
http://forum.xda-developers.com/viewtopic.php?t=10702
only sd update can help
Yes I totally agree that only SD update can help
but to do it we need at least some serial cable to xda
Where to find it or meyby anyone can post some schema of it
rgds
Lukasz
Yes. we need a man to help us how tho backup a radio stack in the sd card so we can load it in the bootloading mode. Please help us out!!!!
hoanghon said:
Yes. we need a man to help us how tho backup a radio stack in the sd card so we can load it in the bootloading mode. Please help us out!!!!
Click to expand...
Click to collapse
who can help??!!!! I have the same problem!
Can somebody make a ROM GSM on SD card?
Hi,
I have been donated an Orange SPV m5000 to help with my disseration,
unfortunatly the rom as been tampered with or removed , well im lead to
believe. Due to this the phone no longer turns on, the only thing the handset will do is get to the bootloader screen.. after resetting the factory settings the handset still does not turn on. i think the handset therefore has no ROM files on it as I have tried to update using downloaded roms such as
Orange_SPV_M5000_v1.13.49_WWE
JASJAR_WWE_11353_137_10301
both say that they cannot communicate properly with the device...
using MaUpgradeUt_noID and following instruction posted the handset starts to update but then says that the updater is not compatable with the handset... any suggestions on how to load a new rom onto the handset would be greatly apprecieted or infact how to to fix this problem with limited technological knowlegde
thanks
cjh28
I'LL GIVE YOU 50 QUID FOR IT!!!!!!!!!!!!!
****, not even I'd be that cruel.
First off I'm 75% sure your device is fine.
ROM chips are nigh on impossible to remove without breaking the device and doubly nigh-on impossible to put back in! No one in their right mind would even concider doing such a rash thing, espcially with something that costs this much!
Now I think the problem is the same as the one I had - these ROM upgrades can contain many separate updates which are then kind of glued together - the problem is (and the problem you may have) is that they don't all match what is already in your PDA.
You therefore have to do one of 2 things:
1) Find an upgrade that DOES match - but then you'd have to know what's already in there & then find a match - unlikely.
2) Make them match with a bit of jiggery pokery. read THIS:
http://forum.xda-developers.com/viewtopic.php?t=40986
Seriously dude, good luck!
Andy
Still Dead well almost
Thanks for pointing me in the right direction, Ive been thru the directions on the link provided and still having no luck, am still getting a communications error - 101 from the update ... am thinkin ive got the incorrect orginal roms ... does any1 know where i can find the orginal roms for a UK Orange SPV m5000 ( am currently using a rom that gives me operator name as Qtek and WWE - the name of the file is on my orginal post)
any further help/guidance would be greatly appreciated....
Many thanks
cjh28
Flash It Again
1. Download This:
http://www.business.orange.co.uk/se...c=PaDPage&cid=1044130840493&mid=1044129390154
2. Make sure u are not using a USB Hub
3. Make sure u are using the proper USB Lead!!!
4. Install Active Sync 4.1 On your Computer (it needs the USB Driver Within this Program to communicate with your UNI.
5. If you have followed all the above correctly your SPV will flash
especially if it is going into bootloader mode.
If you get country error or comm error, hit update AGAIN, DO NOT Disconnect.
IF the upgrade wont go 100% thru, try upgrading the radio only by deleting all the .nbf files except the radio_.nbf then run MAUpgradeUt_NOID.exe
Up and Running finally .... thanks
Just to say that my SPV M5000 is now up and running.. thanks to Andy and comp.solutions for helping me out, just followed ur instructions took a few attempts but its all gd now
Many thanks
cjh28
Damn! Bang goes my 300 quid profit!
No, seriously dude, you don't know how much 'inner glow' that gives me to know that we have helped you recover what may have seemed a lost cause.
Well done! :wink:
Now you can spend the next month trying to figure out how to get things to work 'properly' on the bloody thing..... :lol: (i.e. guess what I've been trying to figure out for the last month: Bluetooth, WiFi, ActiveShyte, installing programs, discovering what a 'uni' is, what 'BT' is blah blah blah.... :roll: )
Andy
Fixed M5000
Glad to Help, Enjoy :wink:
Hi to everybody.
I would want to set you a very strange problem that has happened to one friend of mine. He has installed the original ROM wm5 and he wants to pass to wm6, once connected the pda to the computer activesync unfortunately it tries to syncronize him but remains to syncronize to the endless (1° strangeness) one.
Later starting the official updating htc downloaded by the site, continuing with the instructions and reaching the prophetic moment in which the pda is disconnected by activesync and puts on in formality bootloader to adjourn from the prophetic error 260 that I have documented and I bring here you him:
Me being a little hacker and almost all knowing the methods to upgrade the ROM I have recommended him to try to put in formality bootloader to extract the content of the original file and to make to depart the file ROMUpdateUtility, but also them error 260. Not giving me for defeated I have tried the last method from me known, the updating from micro sd card.I have dictated him footstep footstep what had to do but not even this time of it to wanted to know to adjourn him (2° strangeness, doesn't know however if has correctly done all finding himself him in the Marche and me in Sicily ). I think that can treat more specifically him of the pc of the operating system, even if he has told me that it has the xp.
Now I put me in your hands, aspect suggestions on as to resolve.
I thank you in advance
And excuse me for mine bad bad..... English
To get your P3300 back to live
Don't worry if things goes wrong sometimes.
1.What you can do is maybe a good option if you have a P3300 without a
provider then you can better going
to the website of Htc register yourself (its free!) Then register
your model of your Htc Product.
Go to the Htc club. you will find your originale udate rom!!! This is also
to find it here.
2. There is a nother option.
copy your RUU_singned img to a sd card and put the sd card bac to
your P3300.
Start the bootloader by pressing the both key rec. and power
and hold em when your do a reset.
You will see a 3 color line on your screen then you will see
the install progres from your img.
wait and follow the instruction on that display.
I had also a problem a month ago but and this option by the sd card
did working fine for me.
Now I update the software and also the dial pad to vista look. That is
realy awesome!
It's working fine and do its job what this model has to do!
Succes and good luck!
PLEASE I need help! I have an htc p3300 and when I try to update it goes up to 3% and turns off. There isn't any rom that I haven't tried but noone worked . Is there anything I can do ? Thanks in advance
...
takes sd card out..
you done uspl.. if not.. click it in my signature..