Hi developers,
first of all I'd like thank you for your excellent work. I used a couple of roms and really appreciate your efforts.
This time I updated my device from WM 2003 (4.00.01 ENG, Radio 4.21.00) to the T-Mobile release whitout radio update, posted in this forum by Aurora13. After a backup of my data and removement of the T-Mob. stuff like suggested by Aurora13, I noticed that my backlight was turned of and I couldn't turn it on again either.
So I tried to downgrade again, because working without backlight really is a pain, by I'm unable to.
Not depending on which ROM I use, I get the message: "error getting device data" (CMD.exe) & "execute remote communication program error" (prog. a 1.09).
My active sync (WinXP) seems to work.
The device & telefone seems to work either.
How can I fix this?? Any suggestions?? I'd really like to go back to 4.00.01!!!!
Thanks in advance!!!
If you restored your applications from a former version of WME 2003 you will see this happen. I don't know what registry setting or file is getting changed but after a restore from say 4.00.01 or 4.00.05 backups (I use SPrite Backup) you will see this phenomenum occur after a soft reboot no backlight. Do a hard reset and resinstall your applications and all will work fine.
error in CMD.exe window after T-Mob 4.00.10 update
Hi developers,
I have similar problem, I’d like to go back to 4.00.005 too.
Using the ROMkitchen_4.00.05.exe, in the CMD.exe window I got an error message:
“error: GetConnectionType – An existing connection was forcibly closed by the remote host.
error getting connection”
My activesync seems to be working properly.
What has gone wrong? How do I fix it?
Thanks in advance
Experienced the same with the backlight.
So NEVER do a restore from a different ROM!!! Alway do a clean install.
error in CMD.exe window after T-Mob 4.00.10 update
Do a hard reset and resinstall your applications and all will work fine.
Click to expand...
Click to collapse
Always do a clean install.
Click to expand...
Click to collapse
So in plain words: how do I do that when this occurs during the flashing-procedure :
“error: GetConnectionType – An existing connection was forcibly closed by the remote host.
error getting connection”
Click to expand...
Click to collapse
It's not only the backlight, the problem is the "execute remote communication program error" which makes flashing the ROM impossible .
I used do update with *.exe-files which won't work out anymore :evil: . Can anybody post a step by step guide how to fix it and go back to the ROM before :? (Which would obviously be the best)?
Or does anybody know which registry key has to be changed to fix the backlight :idea: ?
Thanx!!!
Does it work OK after a hard reset?
Because you shouldn't have to go back, do a hard reset and do a clean install of your apps and 4.00.10 should work ok.
Thanx Aurora13,
it now seems to work !
I'm on 4.00.10 again with all the T-Mob. stuff and backlight working.
In my case, going back to 4.00.01 and restoring my backup seems to be less time consuming than doing a clean install (would loose adress book & calendar).
I actually can't spot a lot of differences besides the version numbers in the OS anyway :? .
:evil: But trying to do that, I still have the same problem with the cmd.exe:
“error: GetConnectionType – An existing connection was forcibly closed by the remote host.
error getting devicedata (cmd.exe)”
Click to expand...
Click to collapse
and
"execute remote communication program error" (prog. a 1.09).
Click to expand...
Click to collapse
:evil:
Seems to me like a serious bug that I can't flash my ROM with the USB-cradle anymore :x .
Anybody any suggestions how to get rid of this OS-version without SD-card-writer?? I'd really like to have evrything working again like it was before!
Thanks a lot in advance!!!
Most importantly: do not upgrade to a T-Mobile ROM 900/1900 MHz (American) ROM on anything but a 900/1900 MHz phone. The T-Mobile ROMS contain the RSU phone upgrade, which will run as soon as WinCE boots. You will ruin your 900/1800 (European/Asian) phone if you do.
Click to expand...
Click to collapse
Could that be the problem that I'm unable to fllash my ROM again?
You will ruin your 900/1800 (European/Asian) phone if you do.
Click to expand...
Click to collapse
What does that mean?
"What does that mean?"
i suspect it means that your xda will only work in US
untill you find some way to flash it back to the 900/1800 gsm mode
which is used in EU and much of the rest of the world [/quote]
untill you find some way to flash it back to the 900/1800 gsm mode which is used in EU and much of the rest of the world
Click to expand...
Click to collapse
Anybody know how to do that when unable to flash ROM due to
Quote:
“error: GetConnectionType – An existing connection was forcibly closed by the remote host.
error getting devicedata (cmd.exe)”
and
Quote:
"execute remote communication program error" (prog. a 1.09).
Click to expand...
Click to collapse
Only via XDArit?????????
if it can be flashed using the sd flash card and you have an sd flash card reader / writer for the pc it would be possible
Similar discussion going on here:
http://www.xda-developers.com/forum/viewtopic.php?t=2134
T-Mobile update 4.00.10 sucks!!!
@reiggue
4.00.10 does not suck.
The problems you are experiencing are not real problems but a lack of knowledge on your side.
If you asked how to solve them I can help you to solve EACH one. But you are not asking, but only being negative.
As with all ROMs if you don't know what you are doing, then don't do it.
If you read this forum more securely, you already got answers of a few of your problems:
- How to go back to an old ROM
- Removing the TMobile stuff
- Backup of previous version does not work
All the answers of the above and how to solve them you can find in this forum.
So use the knowledge of the people of this forum and don't be so negative.
I want to second Aurrora13's statement. Over and over in this forum it is stated that you should not attempt these ROM updates if you don't have an SD reader. Sometimes it is the only way to save your bacon (XDA)! If a user insists on ignoring sound advice, then he shouldn't complain about suffering the consequences.
In general, the more experienced users on this forum provide good advise and are more than willing to ehlp others. Personally, I think this forum is awsome!
We all know we are taking risks but being techno-junkies we jump in there trying to improve our XDA's and learn more about its capabilities and ways to improve it. I hope when the next majore WME phone becomes available (I'm hoping for the TI WANDA, though XDA II will probably be first) that we are able to do the same with it.
4.00.10 user wanted to revert back to old rom
You need to use SD card reader to revert back to older rom, Activesync doesn't work properly in windows, even you had sync with your windows.
I had the same problem before, but I found out this 4.00.10rom is more stable then others WM2003roms.
Please follow Aurora13 instruction,removing a few item under program/AIM -/Tmobile and if you have radio signal problem You might want to try to bootloader setting 900/1800 or 900/1900, it works for me.
This is my second time flashing v4.00.10 and I'm using XDA asian unit.
Good Luck.
:lol:
@Aurora13
You might be right in me being negative.
As I read through the forum, there are other people experiencing the same problems.
I think that people should be warned to use the 4.00.10 version instead of hyping it, because, you might agree on that, you loose the ability to go back to an old ROM via activesync, which is the most convenient procedure so far.
I didn't know that I lose this ability, especiallly after performing 4 successfull ROM-updates so far with ROM from this site. That in fact frustrated me.
I agree that the information provided in this forum should help restoring the old ROM.
To close this message, I'd like to thank everybody in this forum who contributes to help fools like me, obviously not knowing what they're doing! This forum is great and I don't want anybody to get the impression I'm blaming anybody else for my faults.
Thanx!
imho then buying a SD reader is a pretty good idea no matter what
they come in versions which read 6 or 7 different flash types so one can also read ones digi cams card if it's a different type
and they are only about 50$ or EUro or something like that
i'm sure getting 2->3 flash readers one of these days
@reiggue
Yep this forum rules big time.
If you check the Sticky thread:
http://xda-developers.com/forum/viewtopic.php?t=1624
There is already enough warnings for the 'beginner', that's why I didn't warn it can be dangerous.
But enough said, good luck with your downgrade and/or if you will stay with the 4.00.10 ROM I'll be glad to help solving some problems you may experience or talk you through the downgrade.
I appreciate your assistance, Aurora13!
Thanx! :lol:
For those of you in the UK - I bought an SD card reader (only reads SD and MMC cards) from PC World for only £6.99 - I've used it to change ROMS back and fourth several times on four XDA's without incident so far - I bought it after an activesync update (genuine O2 upgrade) went horribly wrong and trashed my XDA. I think that everyone "playing" with these ROMs should get one.
Related
There's two type of ROM upgrades: Operating System ROM upgrades and Radio Stack Upgrades.
Radio Stack Upgrades:
Radio Stack upgrades are distributed by the devices resellers. They come in packages with names that may or may not include "Programme B" or "RSU", and they are usually about 2 MB in size. Version numbers are a mess, and lower version numbers do not mean earlier versions. There's at least three different paths of version numbering out there, and the version number on the file doesn't always match the version number displayed at boot and by 'Device Information'.
The official Radio Stack Upgrade process is a mess. We've seen way too many people wreck their devices doing nothing weird or strange. Our advice regarding Radio Stack upgrades is to get them from your own device provider (so you know it's for you type of device: 900/1800 or 900/1900 MHz), and to only upgrade if you know the upgrade will fix known issues that are bothering you.
Operating System Upgrades:
Operating System upgrades are distributed by the resellers in packages whose names may contain "Programme A" or "RUU" (to confuse things, RUU stands for "Radio Unit Upgrade", even though they do not upgrade the Radio part but the PDA part). Operating System upgrades are usually 15 MB in size, and unless you use our utility 'adaptROM', they will only install on phones sold by specific resellers in specific markets.
In this community, the OS is sometimes also distributed as .nb1 file, for use with our XDArit tool. These files are often zipped to about 15 MB, uncompressed they are 32MB (well: 32 MB minus 256 kB actually).
We've seen a number of people doing terrible things to their devices by upgrading their OS ROMs. Here's what we've seen:
- It appears someone is distributing an EXE file for the PPC2003 ROM that contains a part of the OS in the spot where the bootloader needs to be. People that use this EXE to upgrade to 2003 may experience problems immediately or later on, possible making their device unusable.
- We've observed our XDArit tool in the hands of people that should not be using it. If you don't know what a DOS box is, or think you can rename .nb1 files to .nb0, or if you generally do not feel technically proficient, do not use XDArit. It's as simple as that.
(We also blame ourselves for this: XDArit is very counter-intuitive in some parts, and is long-due for an overhaul....)
- Apart from the above, there seem to be problems for people getting back from PPC2003 to earlier versions of the OS. We've been busy doing other things, and we haven't really researched this yet.
- It seems the exe files Jeff makes are OK, and if they aren't, people would know pretty quickly. We advise against running exe-files from others until we've found what causes this 'bootloader mangling' we've observed.
Thanks for your warnings. I just checked my device information. It reads rom version 3;14.06 ENG, Rom date 10/01/02, Radio Version T313. Being not technical at all. Your advice is not to upgrade the Rom or de radio version.
But that leaves me with some problems. F.i. when I try to synchronize with Outlook on my pc. I keep losing mails. The only mails being synchronized at all are those from my inbox. A series of attachments cannot be converted and there is no way to know which mails they are in. I was also hoping that a rom-update would solve my constant memory-lack.
Are there any other solutions?
Upgrade Fails
We have been upgrading some ATEK's with success, but we have two that don't want to upgrade. The message is:
"Can not open COM/USB port...." \\Can someine help...
Re: Upgrade Fails
scalci said:
We have been upgrading some ATEK's with success, but we have two that don't want to upgrade. The message is:
"Can not open COM/USB port...." \\Can someine help...
Click to expand...
Click to collapse
:wink: it's same problem that i have but the slution is download the XDA-dev's XDAtools.exe and cook your ROM then save it on your SD-card
for me it's work 100% my Qtek provieder in Saudi Arbia said that you can't downgread ROM after you do upgread but what ?? it's work
:lol:
[email protected]
Upgrade radio fail
Thanks for the advice. Unfortunately I read it a bit too late.
I download ROM from O2 site, program A (3.20.06ENG) and program B(4.21). Upgarded my xda with program A, after reset it works. When upgrade the radio program B it hang for half hour. After reset the xda does not boot!
Is there a way i can flash back the ROM so that i can use back my xda?
Original version ROM 3.17.03ENG and radio 3.14.
Thanks in advance.
After upgrad radio from 4.16 to 4.21, My O2 does not reset or hardreset normally. After a long process, I get a blank screen with only input icon on the lowwer right corner. How to fix it now?
problem solved.
inaccess said:
problem solved.
Click to expand...
Click to collapse
How have you done it ?
Re: Upgrade radio fail
pcloo said:
Thanks for the advice. Unfortunately I read it a bit too late.
I download ROM from O2 site, program A (3.20.06ENG) and program B(4.21). Upgarded my xda with program A, after reset it works. When upgrade the radio program B it hang for half hour. After reset the xda does not boot!
Is there a way i can flash back the ROM so that i can use back my xda?
Original version ROM 3.17.03ENG and radio 3.14.
Thanks in advance.
Click to expand...
Click to collapse
I did the exact same thing and had the same problem. anything I could do to had my xda up and running again?
thanx in advance
Re: Upgrade radio fail
darkdragoon said:
pcloo said:
Thanks for the advice. Unfortunately I read it a bit too late.
I download ROM from O2 site, program A (3.20.06ENG) and program B(4.21). Upgarded my xda with program A, after reset it works. When upgrade the radio program B it hang for half hour. After reset the xda does not boot!
Is there a way i can flash back the ROM so that i can use back my xda?
Original version ROM 3.17.03ENG and radio 3.14.
Thanks in advance.
Click to expand...
Click to collapse
I did the exact same thing and had the same problem. anything I could do to had my xda up and running again?
thanx in advance
Click to expand...
Click to collapse
If you push the power buttom and than do a hard/cold reset do you get a bootloader ???
If so you need a storage card and put a good rom on it.
Read more on this forum
Re: Upgrade radio fail
I got a problem yesterday night, while trying to updgrade the ROM with the XDA developers Special Edition ROM v1.2, I got the message from the tool saying it will take up to 5 min and a scroll bar appeared on the XDA and not removing it from its base.
But I accidently removed it (in fact, I caught my foot on the damn wire and everything went to the floor).
Now nothing works, except the diagnostic bootloader when I reset and press on button. Hard reset changes noting.
The screen when I hard-reset it shows the scrollbar that was displayed when I tried to upgrade it.
ActiveSync does not recognize it anymore (PC beeps when the XDA is put in craddle, but it does go further).
Any idea how to put back original ROM content ? I have backup of the content made with Active Sync.
I own a SX-56 and subscribe to Rogers AT&T; I guess my config is identical to a AT&T phone, as it's written on top
Any suggestion will be welcomed
Bernard
Re: Upgrade radio fail
droletbe said:
I got a problem yesterday night, while trying to updgrade the ROM with the XDA developers Special Edition ROM v1.2, I got the message from the tool saying it will take up to 5 min and a scroll bar appeared on the XDA and not removing it from its base.
But I accidently removed it (in fact, I caught my foot on the damn wire and everything went to the floor).
Now nothing works, except the diagnostic bootloader when I reset and press on button. Hard reset changes noting.
The screen when I hard-reset it shows the scrollbar that was displayed when I tried to upgrade it.
ActiveSync does not recognize it anymore (PC beeps when the XDA is put in craddle, but it does go further).
Any idea how to put back original ROM content ? I have backup of the content made with Active Sync.
I own a SX-56 and subscribe to Rogers AT&T; I guess my config is identical to a AT&T phone, as it's written on top
Any suggestion will be welcomed
Bernard
Click to expand...
Click to collapse
You need a storage card (32 MB or more SD or MMC will do) and a reader/writer for it,
than write a rom on the card, put it in your devices an start the boot loader, than if everthing went good it will ask you if you wanted to update the rom.
Re: Upgrade radio fail
Weezer-DC said:
darkdragoon said:
pcloo said:
Thanks for the advice. Unfortunately I read it a bit too late.
I download ROM from O2 site, program A (3.20.06ENG) and program B(4.21). Upgarded my xda with program A, after reset it works. When upgrade the radio program B it hang for half hour. After reset the xda does not boot!
Is there a way i can flash back the ROM so that i can use back my xda?
Original version ROM 3.17.03ENG and radio 3.14.
Thanks in advance.
Click to expand...
Click to collapse
I did the exact same thing and had the same problem. anything I could do to had my xda up and running again?
thanx in advance
Click to expand...
Click to collapse
If you push the power buttom and than do a hard/cold reset do you get a bootloader ???
If so you need a storage card and put a good rom on it.
Read more on this forum
Click to expand...
Click to collapse
Yes, I got the Wallaby bootloader and it said GSM failed.
Pls show me where about I could get more info on the forum.
ThanX in advance.
Re: Upgrade radio fail
Weezer-DC said:
droletbe said:
...
Now nothing works, except the diagnostic bootloader when I reset and press on button. Hard reset changes noting.
...
Any idea how to put back original ROM content ? I have backup of the content made with Active Sync.
...
Any suggestion will be welcomed
Click to expand...
Click to collapse
You need a storage card (32 MB or more SD or MMC will do) and a reader/writer for it,
than write a rom on the card, put it in your devices an start the boot loader, than if everthing went good it will ask you if you wanted to update the rom.
Click to expand...
Click to collapse
Any place/URL to look for such thing as the ROM and the writer ? How much should I expect ?
Thanks for your help
Re: Upgrade radio fail
droletbe said:
Weezer-DC said:
droletbe said:
...
Now nothing works, except the diagnostic bootloader when I reset and press on button. Hard reset changes noting.
...
Any idea how to put back original ROM content ? I have backup of the content made with Active Sync.
...
Any suggestion will be welcomed
Click to expand...
Click to collapse
You need a storage card (32 MB or more SD or MMC will do) and a reader/writer for it,
than write a rom on the card, put it in your devices an start the boot loader, than if everthing went good it will ask you if you wanted to update the rom.
Click to expand...
Click to collapse
Any place/URL to look for such thing as the ROM and the writer ? How much should I expect ?
Thanks for your help
Click to expand...
Click to collapse
Now everything works ! And this accident "forced" me to buy an SD, so I will not be so limited by the 32Mb limit
Thank you very much
help needed....
i hard reseted my qtek 1010 .... its like 30mins ....and am still gettin 4 bands white red greem blue... is that normal ...that hard reset take this much time... if this si not normal ... what should i do next
Bootloader not recognising sd card image
I am having the same problem. When pressing power and reset, bootloader shows v 5.17 GSM fail.
I have an sd card which has a new bootloader and nb1 file on it. I do a reset with the card in the slot and i get the same screen v517 GSM fail. From what i have read i should be getting an option to upload the new rom.
Can some one help me out please?
If I currently turn the device on normally activesync does not recognise the device.....
The sd card I have was configured using the xdirt programme and it appears to have worked as the sd card is shows not formatted now...
Thanks for all the info and warnings, just got my XDA II today and Im not too hot with it yet so I guess I will be leaving the ROM's alone for the time being
Peter Poelman said:
Radio Stack Upgrades:
Click to expand...
Click to collapse
We have several system where the GSM rom is toast. Is there a way to get a GSM Rom to SD w/o using the PC Monitor program?
The systems will successfully bootup and we have tried loading the GSM rom using RSUpgrade, but it fails after 1%.
Is there any other way to recover the GSM Rom?
You may try speaking to Cgigate on this forum, he has hardware methods of programming the chips directly, whether it works for the radio stack as well as the bootloader and rom you will need to ask him.
Instaead of Hi I say you are great people
So the case is... I just need to have working Qtek 1010 with SOME additional soft on it inside a ROM...
I've read many pages in this forum and I'm able to find too many ways to change my ROM. I'm totaly confused.
I work for extremaly big worldwide company and they gave me q Qtek, told me to use it, gave me one simple application and web link... so I do.
But the Qtek is much powerfull than that so I need to flash my ROM.
Now comes a question: where can I find one document how to prepare for it, what tools do I need, how to do it... I know after some tries I will be confident enough to do such stuff easlily, my problem is I have only one try, they will make me w trouble if I screw my company recource.
I understand you had milion similar questions like that. Basicly I need help how to flash so I can be sure 100% not less that I can recover in case of trouble. I hope you understand I'm afraid to do it because lack of experience and you are able to tell me if I should try to flash...
or maybe it's better for me to ask my boss to by me a 512 MB SD and install all additional soft on it and stop worring about memory?
I'd appreciate any opinion... you are the best and I'm just new to this bussines...
Get an sd card, backup existing rom to sd card, very easy to do by bootloader method. Enter bootloader by holding down power while inserting stylus in the reset hole on the bottom left of pda then press top right function key, then choose ce to sd. Once you have done this you can check if it has in fact backed up your rom by putting sd card in the pda, enter bootloader, it will then give the option to program the rom, just remove the card and push the reset with stylus again, the other method to check a working backup is to put the sd card in the pda, the pda will ask to format it, say no and remove it. Once you have a backup you can either use xdatools to copy it to your pc or keep it in a safe place, no more files must be written to this card otherwise it will be rendered useless, if you wish to reuse the card sometime it will need formatting. Once you have your backup, go to www.yorch.net, cook yourself a rom and download it in the exe format, this will do a normal install from your pc while connected to pda via activesync, if it messes up you always have your backup. Once you become more proficient at using xdatools you might wish to try out lots of different roms until you are happy with the result, you can go on to sd card flashing which is a much better way of programming rom and much less prone to error because it doesnt rely on a pc connection. I would advise you to leave the radio stack alone, if you can make and receive call ok leave it alone. Have a thorough look around the forum before proceeding. Its good fun to program your pda and you can make it a much better tool, but make sure you always have a way out if things go wrong.
www.yorch.net not working... is there a place like that?
Hi!
I read the above post, one of the clearest here, and I almost got the confidence to finally do this ROM update...
But:
1) Can't find the www.yorch.net website where I could "cook myself a rom and dowload it in a .exe format"
2)It's still not very clear to me what exactly cooking a ROM means: it concerns the OS (the version 1.53, 1.72 type of stuff), the extended ROM (the default programs u get starting after and hard reset like the SW for the camera etc) or both?
Thanks!!!
Chris
Another ROM Kitchen
Try the following ROM Kitchen http://lumpistefan.dyndns.org/
I noticed that you have the XDAII. Now, someone please correct me if I'm wrong but the directions above and the ROM kitchens are all for the XDA I or Wallaby version.
Re: www.yorch.net not working... is there a place like that?
cchris said:
Hi!
I read the above post, one of the clearest here, and I almost got the confidence to finally do this ROM update...
But:
1) Can't find the www.yorch.net website where I could "cook myself a rom and dowload it in a .exe format"
2)It's still not very clear to me what exactly cooking a ROM means: it concerns the OS (the version 1.53, 1.72 type of stuff), the extended ROM (the default programs u get starting after and hard reset like the SW for the camera etc) or both?
Thanks!!!
Chris
Click to expand...
Click to collapse
Chris,
Those Roms are made for XDA1 beware it's not made for the device you have!!!!!!
What's the kitchen for XDA II
THANK YOU!
I was starting on the wrong foot... :-( :?
Anyway a couple of more question:
1) Is there a place like that for XDA II Kitchen? Is my undestanding of what a kitchen is correct?
2) The process for ROM backup outlined above, is still correct for XDA II?
Thanks!
Chris
I'm in the same boat as you CChris. I've been diligently a daily searching through the numerous topics on this site looking for similar information. I haven't found it yet - or at least nothing not-to-super-technical. I do know that you get to the bootloader by pressing the power button, reset button, and down on the toggle at the same time rather than the Wallaby way of the power and reset buttons only. It also seems that there are issues regarding 'country' and that it requires software to get around this. I haven't found the software yet - the links that I've seen all point to "itsme's" website which is currently down.
You can read the thread here: http://forum.xda-developers.com/viewtopic.php?t=9053&highlight=
Hopefully, someone with a lot more knowledge than me can go over updating the XDA II as clearly as cruisin-thru did for the XDA I.
The instructions on http://wiki.xda-developers.com/wiki/HimalayaRomFlashing are correct.
Unfortunately, there was an issue where the wiki removed the ~ from itsme's website's address. It's been replaced with %7e and now the link works.
If you download a ROM from the same vendor as your device (e.g. Qtek ROM on Qtek device, iMate ROM on iMate device, etc.) you don't need to use these instructions, you can just install the ROM upgrade from your vendor.
If you want to use the latest ROM (from iMate) and your device isn't an iMate, you need to decrypt, change the "country" code, encrypt, and then run the upgrade.
You can also edit the extended ROM when flashing, but it's easier to use itsme's extRom Tools. See http://forum.xda-developers.com/viewtopic.php?t=8422
You do NOT need to flash the ROM if you are not experiencing problems, or if you are experiencing problems which the new ROM also has (for example ugly cleartype fonts, which may be fixed without flashing). Flashing the ROM may void your warrantee. You will lose all your data when you upgrade, and you should not restore a backup, only your my documents folder.
If you are a newbie, it may be best not to flash your ROM. If you typed in itsme in google, you would have found his xs4all address as the third link, and would have quickly found out his site wasn't down at all, but the link was just wrong.
Just a warning: the things that could go wrong when flashing are potentially much worse than a wrong URL, and the answer to those problems won't be the third link in google.
NO MATTER WHAT YOU DO DON'T COME NEAR THE RADIO UPGRADE I QUOTE I FRIEND HERE THAT SAYS
DON'T MESS UP WITH A WORKING RADIO OR YOU'LL END UP WITH A SLIVER BRICK !!!!!!!!!
BEEN THEIR :x :x :x :x
Rabia said:
NO MATTER WHAT YOU DO DON'T COME NEAR THE RADIO UPGRADE I QUOTE I FRIEND HERE THAT SAYS
DON'T MESS UP WITH A WORKING RADIO OR YOU'LL END UP WITH A SLIVER BRICK !!!!!!!!!
BEEN THEIR :x :x :x :x
Click to expand...
Click to collapse
Rabia can you tell me how did you get out from there?
never got out of it
Hello all.
i have been searching the forum for the solution of this problem, some guys suggested solutions that involve a file that is no longer available, upgrade.zip which is aparently a radio upgrade(or downgrade) made for the SD card (a startup.exe in a startup directory).
Well, having said that, i had to solve this problem last night, and here it goes.
after trying original ROM upgrades, all versions, 3.14,3.17,3.18~4.
nothing worked.
finally, i grabbed a copy of xda-developers's 1.1 ROM
and guess what!!!
the phone started up, gave me the screen allignment and the whole menu!
sure enough, ran file commander(that version did not have file manager) copied the RSU files over to the windows directory, and the exe file to the windows\startup and rebooted the phone.
it stopped at 1% again... NOW REMEMBER, i had an EMPTY BATTERY...
the 1% ERROR is a battery issue, that turnes into this issue when the modem upgrade FAILS.
so here is what i did. and you be the judge.
i ran active sync from the phone, and it did connect(while the upgrade program is still running) and left the room/
in 10 minutes i came back and the upgrade was completed, so here is what i think
i think that the RSU will still run if it was in the background!!! even with an empty battery(connected to the charger ofcourse.
i did not have much time to do anymore testing, but i am sure that someone with the same problem will make the time. the key from my experience is that the proccess will complete if it is in the background.
there u have it.
good luck.
i forgot to add that the upgrade i used was taken from yorch's page and it was the latest Tmobile, i had to downgrade later to an older version that i have to solve the network issue, but it was done(the downgrade) like a charm, i had a full battery then.
here is the Tmobile RSU link v6.24
http://www.yorch.net/downloads/ROMS/TMOradiostackupgradeR624 .zip
a 1.26 MB file.
Hi!
Now I'm taking a try (unfortantely I've found only the special edition rom 1.2).
No success with SE ROM 1.2. Where could I download 1.1 from? Found it nowhere.
One more thing: maybe the version of active sync counts? Mine was 3.8.
plg said:
No success with SE ROM 1.2. Where could I download 1.1 from? Found it nowhere.
Click to expand...
Click to collapse
http://lumpistefan.dyndns.org/tools/special_rom_1.1.exe.zip
HTH
Stefan
LumpiStefan said:
plg said:
No success with SE ROM 1.2. Where could I download 1.1 from? Found it nowhere.
Click to expand...
Click to collapse
http://lumpistefan.dyndns.org/tools/special_rom_1.1.exe.zip
HTH
Stefan
Click to expand...
Click to collapse
Thanks, Stefan! Maybe this one will help...
Hello to all, and mr stefan,
I upgrade my qtek 1010 with SFX56 windws 2003, it also upgraded my RSU, which is not working in Middle East. Kindly advise me how to downgrade or upgrade with other RSU. Thanks
your problem is in the network selection, search the forum for the proggy that changes it from 1900 to 900 and you should be OK.
i hate telling anyone to search i know how hard it is, but i do not have a clue where the proggy is, meanwhile, if i run across it, i will point it out,
if not, go to the bootloader, select GSM and change it from there, you will loose all data so backup first,
Good Luck.
search for "bandwith switch tool"..... good luck.
here it is on wiki
http://wiki.xda-developers.com/index.php?pagename=BandSwitchTool
tell us if this fixes your problem.
if not, you will find links to radio upgrade on
[/url]http://lumpistefan.dyndns.org/tools/ thanks to LumpiStefan
for a great resource.
good luck.
never knew you can post as guest
well, again, let us know what happens.
hi all
I just picked up a XDA from a guy who screwed up the radio stack upgrade (it cosy me @$80 USD ) and im now on a mission to fix it...
using your advice I used the XDA developers rom 1.1, this got the phone to start up with the working today screen and menus etc....
I install/copy over the new RSU upgrade files over and reboot
but here is where i get a bit stuck...
I cant get into active sync fast enough before I get the 1% RSU upgrade error, so the upgrade wont run in the background, it just sits there....
how do you get into active sync before the error comes up?
cheers
MADMAX
Hi there.
I've just bought a Touch 3g with Orange in France, and even though the box has WiFi written all over it, it appears that I can only connect to Orange WiFi hubs. I have a different hub at home and would like to know whether I can unlock the WiFi function so that it is free to work with any WiFi connection.
I've had a look on here and can't find the answer to my question. I apologise in advance if I've missed the thread somewhere.
Thanks for any help you can give me.
PS - As someone new to this geek lark, I'd also be interested in knowing what programs I really ought to install onto the phone. You're top 5 programmes if you like.
The orange branded phones (if they are the same as the uk ones) have the unique manager not the standard wifi one. So even if you have an orange wifi hub you still don't get a wifi connection (at least not one you can do anything useful with)
Unique is a wierd orange version of voip.
The only way of changing it (i think) would be to flash a new rom to the phone.
Hi,
I got a French Orange phone too that I have flashed to non-Orange ROM, so Wifi works OK.
For programs I would recommend SBP Mobile Shell to replace Touch Flo, and TrackMe to have fun with the GPS ( I find it awesome).
Bonne chance
TrackMe does not work on my Jade (.net 3.5 installed), but I can recommend GPS Cycle Computer as well. Supports a lot of data formats, check the link or the xda-dev-thread for more information.
Thanks very much for all your help. I'll have a look at flashing the ROM and will give that a go.
Is flashing Rom a particularly complicated or potentially phone breaking experience? It's my wife's new phone, and I don't want to live with an angry woman whose phone no longer works
DaM79 said:
TrackMe does not work on my Jade (.net 3.5 installed), but I can recommend GPS Cycle Computer as well. Supports a lot of data formats, check the link or the xda-dev-thread for more information.
Click to expand...
Click to collapse
Did you install SQL Compact framework as well ?
Billy Ze Feesh said:
Thanks very much for all your help. I'll have a look at flashing the ROM and will give that a go.
Is flashing Rom a particularly complicated or potentially phone breaking experience? It's my wife's new phone, and I don't want to live with an angry woman whose phone no longer works
Click to expand...
Click to collapse
No it's not complicated ; yes is very much potentially phone breaking
FYI I flashed HardSPLv3 on my phone (see Jade ROM forum) , downloaded the kitchen (idem), built a ROM using htcrt (in the kitchen) and the OS.nb found here http://www.planete-htc.com/index.php?mod=forum&ac=voir&ref=20&cat=220&id=18955, and flashed it. And tada, a stock french phone with wifi access.
Your SPL/ROM will degrade from 1.7 to 1.4 though.
OK. Thanks Gomi. I'll have a look and see if I really want to risk it or not.
Hello @ll.
I have a french Orange Jade too.
The UMA radio ROM make me sick !
But for me, the HardSPL does not work... The RUU progressbar still blocked at 0%.
fyi : I have the SPL 1.71.000 version.
Concerning the HardSPL, i'm not using the original exe, because of the unavailablity of the "server". I use an extracted nbh file of the HardSPLV3.
Any idee ?
fyi : because of specifity of the RUU used to flash the HardSPL, you can not use an another RUU to flash it.
With luck, the HardSPL setup exe have found the server, and now, all is ok !
Hi mate and welcome to the slippery slope. I only have Dad to convert now...
There may be another way to prevent the Orange rubbish crippling your phone - when you do a hard reset your phone will give you three seconds after the first boot-up before it begins to customise the ROM with all the operator-specific stuff. If you do a soft reset within those three seconds you prevent the customisation. If the crippled WiFi is part of this customisation then you'll end up with the default Windows Mobile WiFi manager. This trick used to work on my Universal and my Elf. You can experiment with many hard resets until you get it right.
Having created a vanilla Windows Mobile system you may need to fanny around unlocking the extended ROM and cherry-picking the customisations that you do want (such as the GPRS connection data) but this effort might be worth it to have an unbranded phone.
Flashing a new ROM will almost certainly invalidate your warranty.
(Oh, and a hard reset will wipe off all your data of course.)
Thanks SiliconS.
Have tried that and I don't get the 3 second warning. I just get a message saying that this will wipe the phone (hard reset) and asks me to press 'enter' to continue (which I obviously do). It then tells me:
Format FAT partition
FAT partition complete
before carrying on with all the Orange stuff. Have tried randomly pressing soft reset at various times, and all this does is turn the phone off...
Thanks anyway though.
That's weird. In that case Orange must have embedded their rubbish within the fundamental ROM rather than the extended ROM like everybody else does.
Flashing a completely new ROM may be your only hope, Luke. HTC have released an official ROM for the Jade that surely wouldn't invalidate your warranty...
http://www.htc.com/www/SupportDownload.aspx?p_id=174&cat=2&dl_id=537
I think an official ROM update could be the way forward yeah. I'll have a look this weekend maybe.
for the benefit of people who may be subscribed to this thread, I think I have found a fix for the orange rom using data connection instead of wifi, read on here:-
http://forum.xda-developers.com/showpost.php?p=4517074&postcount=12
post back to that thread if it works for you!
I have an unbranded Chinese P800 from eBay and would like to upgrade it to WM 6.0. What I have onboard :
1. WM 5.0 OS 5.1.525 (Build 15364.3.4.4)
2. Processor ARM926T OMAP730
However, one perculiar thing is that I can't find any Device Info on IPL, SPL, Radio ROM etc. I've tried using WST 4.2.2 but to no avail. I'm using my Lenovo S10 Netbook running XP and ASync 4.5. What I've managed to do are :
1. Run USPL, it goes from 0.. to 60.. and hangs, I reset my P800, USPL resumes to 70..100 and the RUU program starts,
2. the screen on my P800 turns dark with the Linux Penguin and some message of mapping, preloader etc comes on temporarily before Windows comes on again,
3. RUU runs, upgrading to image 9.99 (original image is blank-no info), when UPDATE ROM IMAGE ON YOUR PDA PHONE comes on it never gets to more than 0% (no blue progress bar), my P800 screen goes dark, loses connection and I get ERROR(260).
I have done this several times and there is no way I can verify if the CID is unlocked as I can't get the SPL info anywhere. So I will appreciate any help I can get. Thanks in advance.
Hi Salimbs,
Have a look at these two posts:
* Regarding the CID unlock for Artemis
http://forum.xda-developers.com/showthread.php?t=334667
* Regarding the error 260
http://forum.xda-developers.com/showthread.php?t=293085&highlight=error+260
Hope this will solve your problem
mouse.co.nr said:
Hi Salimbs,
Have a look at these two posts:
* Regarding the CID unlock for Artemis
http://forum.xda-developers.com/showthread.php?t=334667
* Regarding the error 260
http://forum.xda-developers.com/showthread.php?t=293085&highlight=error+260
Hope this will solve your problem
Click to expand...
Click to collapse
Hi mouse.co.nr,
Many thanks for your reply and pointing to the right direction. I'll get to it asap and post the outcome (success I hope!)
Hi Salimbs,
just another note,
in the past I found myself in big trouble (not with Himalaya as it was SD flashed) but with Charmer and Magician ROM updates, also with ROMs that I have already used in the past and classified as stable,
Roms used to get blocked during upgrade leaving me in Boot mode if I don't remember bad..
I have noticed that this error was common when Ms. Office applications like for sxample Word or Excel was turned on!
it makes like a kind of disturb to the rom!
once closed (all office and not necessary applications) roms updates smooth and bug free!
Don't remember if it was an Err 260 or not, I just remember that update blocked at a certain point...
try to do your upgrades with office turned off!
wish it will help to solve your problem
X-Mouse
mouse.co.nr said:
Hi Salimbs,
just another note,
in the past I found myself in big trouble (not with Himalaya as it was SD flashed) but with Charmer and Magician ROM updates, also with ROMs that I have already used in the past and classified as stable,
Roms used to get blocked during upgrade leaving me in Boot mode if I don't remember bad..
I have noticed that this error was common when Ms. Office applications like for sxample Word or Excel was turned on!
it makes like a kind of disturb to the rom!
once closed (all office and not necessary applications) roms updates smooth and bug free!
Don't remember if it was an Err 260 or not, I just remember that update blocked at a certain point...
try to do your upgrades with office turned off!
wish it will help to solve your problem
X-Mouse
Click to expand...
Click to collapse
Hi mouse.co.nr,
Well noted and I'll keep this in mind. From your experience have you ever tried the SDHC.cab so that your phone can read the micro SDHC? I ran it in my phone and now my STORAGE CARD is gone! Anyway, thanks again. Cheers!
Not SDHC my friend but Artemis SDHC,
I don't know what is exactly the difference, maybe one is for big SD and the other is for MicroSD, anyway I've tried the one for artemis and now I'm working with a 8 GB micro sd, and it can go till 16 GB.
I've tried that with other artemis ROM versions and works very good...
For your problem have a look at this post:
http://forum.xda-developers.com/showthread.php?t=345038;
and download the programs indicated below...
What I advice you to do is the following:
1) remove your SDHC card (it have a sort of bad luck with any upgrade that needs a reboot)
2) copy SDHC_Artemis_back2original.cab to your documents folder (PPC documents obviously) then run it, soft reset.
3) then copy the correct SD HC for artemis "SDHC-Artemis.cab ", in the same way of the above and run it.
this shuld work "I wish for you"
let me know..
how about the ROM update? did you succeed at the end?
have you also updated also GSM radio ROM? generally original roms come with a 2.11.... version, old and not always good in reception!
I advice to change it in 03.18.90 shall work well also with your provider, for GSM signal WIFI, GPRS and GPS..
have a look at this post for more details: http://forum.xda-developers.com/showthread.php?t=397939
X-Mouse
mouse.co.nr said:
Not SDHC my friend but Artemis SDHC,
I don't know what is exactly the difference, maybe one is for big SD and the other is for MicroSD, anyway I've tried the one for artemis and now I'm working with a 8 GB micro sd, and it can go till 16 GB.
I've tried that with other artemis ROM versions and works very good...
For your problem have a look at this post:
http://forum.xda-developers.com/showthread.php?t=345038;
and download the programs indicated below...
What I advice you to do is the following:
1) remove your SDHC card (it have a sort of bad luck with any upgrade that needs a reboot)
2) copy SDHC_Artemis_back2original.cab to your documents folder (PPC documents obviously) then run it, soft reset.
3) then copy the correct SD HC for artemis "SDHC-Artemis.cab ", in the same way of the above and run it.
this shuld work "I wish for you"
let me know..
how about the ROM update? did you succeed at the end?
have you also updated also GSM radio ROM? generally original roms come with a 2.11.... version, old and not always good in reception!
I advice to change it in 03.18.90 shall work well also with your provider, for GSM signal WIFI, GPRS and GPS..
have a look at this post for more details: http://forum.xda-developers.com/showthread.php?t=397939
X-Mouse
Click to expand...
Click to collapse
Hi Mouse,
Thanks to you my STORAGE CARD problem is solved! However with regards to my ROM update I'm still a little confused.I've managed to patch the artemis_jumpSPL_pof_v1.nb using Kermit the Frog(jumpSPL.exe). After that I run the RUU again but I still get the same result-0%Can you tell me how or show me the relevant threads?
Hello Salimbs,
Kermit sounds funny but it's the first time I don't know how does it work!!
try the ufficial SPL unlocker for artemis, nothing more,
download from here:
http://forum.xda-developers.com/showthread.php?t=311403
* Connect your PPC through Active Sync (connection shall be established),
* Run start_uspl.exe from the Artemis_USPL package in the link above,
* Run till it reachs 100% and Dos Window turns off alone, and launches RUU upgrade interface..yes, yes, continue, continue.... 100%
* After device shall have SPL 1.11 and so you can load new ROMs
let me know if it will solve the problem..
X-Mouse
mouse.co.nr said:
Hello Salimbs,
Kermit sounds funny but it's the first time I don't know how does it work!!
try the ufficial SPL unlocker for artemis, nothing more,
download from here:
http://forum.xda-developers.com/showthread.php?t=311403
* Connect your PPC through Active Sync (connection shall be established),
* Run start_uspl.exe from the Artemis_USPL package in the link above,
* Run till it reachs 100% and Dos Window turns off alone, and launches RUU upgrade interface..yes, yes, continue, continue.... 100%
* After device shall have SPL 1.11 and so you can load new ROMs
let me know if it will solve the problem..
X-Mouse
Click to expand...
Click to collapse
Hi mouse,
Actually "Kermit the Frog" is the icon for JumpSPL.exe. Anyway, like I've mentioned in my first post everything seems OK except that I can't check for the SPL and when the RUU runs it never gets to more than 0% and then I lose connection and get ERROR 260. I'll be trying again and let you know of the outcome. Once again, thank you, I really appreciate your help!
salimbs.
Hi Salimbs,
sorry for hearing that...
try to enable RAPI before USPL!
http://forum.xda-developers.com/showthread.php?t=320155
Remove SDHC card (and uninstall SDHC software from ppc)
Then USPL
Then Rom Update Utility
mouse.co.nr said:
Hi Salimbs,
sorry for hearing that...
try to enable RAPI before USPL!
http://forum.xda-developers.com/showthread.php?t=320155
Remove SDHC card (and uninstall SDHC software from ppc)
Then USPL
Then Rom Update Utility
Click to expand...
Click to collapse
Hi Mouse,
I'm open to all suggestion. I'll try it again and we'll see. Thanks.
I'm afraid that I've not met with any success after trying all the combination and tricks mentioned in this thread. Every time at the part of the RUU flashing it never goes beyond 0% then I lose connection and get ERROR 260. I would appreciate any help I can get, and thank you in advance.
Hallo,
i have got a p800 from china and have the same problems. I tried all things but the update doesnt work. The connection always interupts with err260.
regards