Database Users

Help VPN - Wireless - GPRS

Please can anyone help. I have an XDA ll
I connect to the web useing GPRS
I connect to my offices useing VPN
I have purchased a Socket Wireless Lan SD card (the Sandisk card did not work, but the Socket card did immediately)
My problem is if I set the Wireless card to allow me access ot my PC I can sync and view files but if I try to go on the web (via the PC) it trys to connect with GPRS.
If I set my network card to access the internet I cannot sync to the pc or see files on the PC
Surely there must be a way that allows the Wireless card to connect to the internet and the PC at the same time AND WHEN THE CARD IS REMOVED internet reverts back to GPRS and the VPN also works
Any help please
Thanks
Sam

WiFi PPC > PC (detailed)

i got usb wlan adapter. it's ip is 192.168.1.130.
the lan adapter in my pc has 192.168.1.84 ip.
all computers on my local wired network has 192.168.1.* addresses and 255.255.255.0 subnet.
i fixed the IP of SD sandisk wifi adapter on my mda compact to 192.168.1.131.
Usb adapter is in peer-to-peer (ad-hoc) mode and i normaly connect with ppc to it. i got 80-100% signal all the time.
the problem/question #1: why i cant ping from ppc to PC ? firewall turned off.
#2 - if i could ping it, would i be able to ping all the other ip's on my wired network?
#3 - if i could be able to ping all of those computers, how should i set-up a workgroup on ppc and be able to map network drives through wlan link?
#4 - if i would be able to map the drive over wifi link, would i be able to add mine 20.000 mp3s to the pocketmusic's playlist and play them wirelessly?
thanks in advance!

And when i ping from PPC - i see on pc that "received" packets are raising -
ie. now it shows 12 packets received, when i run ping on ppc to pc, the
number increases to 16 (4 pings!) but all are time-outed....
And if the IP on both sides are set to "automaticly", they got assigned
169.254.*.* IP's. Then the ping goes through correctly but i can't still
access the network. The network bridge between LAN and WLAN connection only
made things worser, making my internet connection unusuable (DSL through the
same LAN connection) so i deleted the bridge. Now - ping is going but i
still cant map my pc's drive.... what could be the problem...

Same problem
Dakky,
I have the exact same problem. I bought a Netgear WG111 Wireless USB dongle. I created an ad-hoc network, connected to it but can't connect to the internet or browse my shared. On my desktop the sent packet go up but not the recieved.
Are we both being stupid, can't you connect your PPC to your PC using an ad-hoc network? I have now tried to connect with two different desktops to my XDA and a friends XDA IIs running WM5 to my desktop but had no success. I can connect to an access point and browse file/internet no problem.
I have an XDA EXEC and run XP Pro on desktop.

I've got similar problem. I have Linksys Wireless-G usb network adapter, i assign same class IP adresses (192.168.2.1, 192.168.2.2, mask 255.255.255.0) the wifi connects in ad-hoc modebut how can sync over wifi ?, if I am able to sync over wify i will be able to use my pc's internet connection wich is a lot faster than any gprs/edge

I don't think you can network in this way - basically you have a bunch of clients but no 'server' I think you need a wireless hub (with Internet connection in there somewhere) in there somewhere.
If you do a search on microsoft web site ther is some info about using a PC as an internet share for other PCs but you have to use a very specific IP address rnge for this and set the share PC up in a certain way

gprs over-riding wireless lan card

Just purchased an SDIO 802.11b Wireless LAN Card for my Magician. The trouble is whenever I connect to my Wireless network at home the GPRS starts trying to connect. This overrides my WiFi card. Anybody know how to stop this happening.

Using wifi for both internet and office network access

Hi,
I am having trouble using wifi on my O2 XDA Mini S (Wizard) to access both the internet and shared directories on my office network.
If I have a wireless laptop PC, then once it has connected to its base station it will transparently access both the internet and shared drives over that wireless network.
But with the Wizard things seem to be different. Instead I have to go to settings | network cards and explicitly say whether the wireless network is for internet access or for "work" access. And change that setting again when I want to change which destination (internet, or shared drive) I am accessing. All this despite exactly the same wireless network being used.
Please tell me this isn't necessary and I have just missed something Is there a way of configuring wireless network access on the Wizard to transparently access both the internet and shared drives?
Julian
:?

Anybody? Surely others have experienced this problem?
Julian

internet access through ad hoc wifi connection?

hi, im not able to connect to the net with my wizard.
i dont have a wireless router so am connecting directly to my laptop, the ad hoc connection i have made works fine for file tranfers, but not for activesync or connecting to the web in either PIE or minimo.
i know activesync isnt possible but surely i should be able to use the broaband from my laptop?
any pointers would be greatly appreciated. software? settings?
its a t-mobile uk vario with qtek test rom.
also anyone know of a remote control utility, i use logmein but would like something a little more menu/macro based for control of media.
cheers
kevo

Try turning on Internet Connection Sharing (ICS) on your laptop; that'll make your laptop act a bit more like a router, providing NAT services to the Wizard.

yeah i've tried that, and i've just tried bridging connections (dont really know much about that) but that hasnt worked either.
kevo

My configuration
Me too, I use ADHOC connection for my WLAN.
PC configuration:
ADSL connection shared
Adress IP:192.168.1.1 Mask:255.255.255.0
PocketPC configuration:
Adress IP:192.168.1.55 Mask:255.255.255.0 Gateway:192.168.1.1
DNS:80.10.246.2 for Wanadoo
Your problem is certainly the DNS.
You can put 192.168.1.1 too.

so it is possible? cool!.......but im still having problems.
i cant figure out how to enter these settings, not to sure where to put them,
iv tried puttin the DNS in the -> connections -> vpn
and -> network cards -> networks adapters -> SDIO WLAN Wireless Adapter
sorry to be a pain, but could you point me to where to get each address and where to put them?
also is there anything particular you did to set up the adhoc network? i just used the Windows XP wizard and then ticket the AdHoc option after.
my laptop is conected to the router and the router is connected to aol adsl.
the ip address of my laptop is showing as a simple 10.0.0. number on the LAN but "Autoconfiguration IP Address. . . : 169.254.235.147" for the WLAN
none of my setup has a static ip address, could this be causing the problems?
thanks
kevo

It's more hazardous without static adress but it's can work.
My PC has directly access to the Internet with a ADSL modem.
It's here (network cards -> networks adapters -> SDIO WLAN Wireless Adapter )
Apparently, it's ok for your PC and the Ad-Hoc mode.
Maybe, you should have your adress IP WLAN on the same network adress of your router.

I GOT IT WORKING!!!
I started again from scratch.
set a new WLAN. added new setup to the vario, added the DNS etc to the vario.
the problem i was having was the way i was sharing the internet connection, i was trying to shared the internet from the wireless to the lan rather than the internet from the lan to the wireless (if that makes sense to anyone!!!). i also ticked all the connection sharing services to allow them, just need to go through them and see which i dont need now.
thanks for the help guys
kevo
(its showing my transfer rate as 11Mbps, although i think iv done the G tweak and my laptop says its got a G card. what speeds should i be getting?)