Greets gang,
Several days ago I started getting the subject message appearing in my WinXP system tray. It was on my Gateway laptop and it would appear over and over again, citing 'Unknown Device' when you'd click the annoying ballon. My Jam wasn't even connected at the time.
I basically blew everything away and restored my laptop to factory original settings. Problem persisted. I thought it might be hardware, but the message has now disappeared, only re-appearing when I plug in my Jam. My USB Bluetooth dongle plugs in fine, no errors.
Someone else had bent pins on their USB port or plug--I see none. Anyone else have issues with this, or can anyone offer some help?
Presumably you have installed (re-installed) Active Sync on the PC? As you may already know, as standard the JAM and many other PPCs are not recognised by the computer unless Active Sync is installed [properly].
www.softick.com provide an excellent utility to have your PPC recognise as a removable drive without using Active Sync.
Yes, ActiveSync has been installed & re-installed. New development? I plugged in an 80Gb external hard-drive to that laptop and Winblows is telling me its connected to a non-hi-speed USB port, which it is not. Could be something there.
I'm going to re-flash the Jam to factory ROM, then I will dig into the USB issue.
I had this problem and I tracked it down to the fact that I had picked up the wrong cable!
Same connector but for my camera
The wrong cable thing may very well have been it, but I was also having probs with an external hard drive I was using. I ended up rebuilding my laptop twice and now things seem to be fine. What a drag.
hypr said:
Greets gang,
Several days ago I started getting the subject message appearing in my WinXP system tray. It was on my Gateway laptop and it would appear over and over again, citing 'Unknown Device' when you'd click the annoying ballon. My Jam wasn't even connected at the time.
I basically blew everything away and restored my laptop to factory original settings. Problem persisted. I thought it might be hardware, but the message has now disappeared, only re-appearing when I plug in my Jam. My USB Bluetooth dongle plugs in fine, no errors.
Someone else had bent pins on their USB port or plug--I see none. Anyone else have issues with this, or can anyone offer some help?
Click to expand...
Click to collapse
I have the same problem.
It seems, this problem appears mostly on laptops, not on PCs?
I tried to uninstall\install, repair with all ActiveSync data removal or leaving it - No result.
Also, tried to replace the cable (which is ok, im sure with the one from the camera) - No result.
Temporary way out: do Off\On with qtek9000 on cable connect.
Another way out: Turn On the "Enable all incoming beams" flag in Start -> Settings -> Connections -> Beam (this path may vary depend on your Universal brand name). As I seldom need to connect via IR to other devices, I have switched this option off to consume power.
DOES ANY BODY KNOW, HOW TO FIX THIS BUG?? Any Ideas?
Qtek9000 with laptop Toshiba Satellite Pro \ Win XP SP2
it seems dat a noob like me at last can give a help
i have the same problem last time, and as i trace it down, the problem lies on the cable.
as u know that we all use mini usb (usb cable type b) for our o2 mini, but not all type b cable support pc connection, some will only give charging access
i have 2 mini usb cables, one comes from my external hdd, and the other is i buy it myself. the difference is that the 1 i bought actually have a shorter connector (maybe the problem due to this)
so try to buy another cable, as i don't know any other way (reinsatalling pc os, hard-reset device or reinstalling active sync won't solve the problem)
NB. both cables are working when i plug it to my external hdd, so maybe the cable is not faulty. one of the advantage that i got is that i can charge my mini without disabling the active sync usb connection
sorry for my bad english
i can almost essentially confirm that it is NOT the usb cable.. I have been using a usb cable i had around the house for syncing my phone, and it has worked perfectly ever since I first received the phone (over half a year ago), but all of a sudden, i plugged in my device, and received the "usb device not recognized" error message... does anyone know the cause of this?
Hi all, anybody got the same problems, and if yes, were they solved and how?
i have an unlocked spv m500
1. everytime i plug in my ac charger, my magician soft resets. thats so damn annoying its not funny. it doesnt do it with usb charging.
2. ive got a socket e300 sdio wifi card and i cant find any network after i install. ive tried the socket cd and followed all instructions. it all install nicely, but no network. my wifi isnt encrypted, besides there are 4 others in my building. it cant find anything.
3. profiles. im using winapps (Thx fabrizio) but for some reason, it only vibrates for rings and not receiving sms if i set profile to silent and only vibrate.
Thats all i can think of right now
I bought one of these
http://cgi.ebay.co.uk/SDIO-WiFi-PDA...2QQihZ009QQcategoryZ58542QQrdZ1QQcmdZViewItem
For my SPV500 and I have got it working all fine with my wireless and I can stream videos and music e.t.c from my pc. Problem is is that the wireless randomly stops working. I loose my connection and the settings>Network adapters funcion does not respond, neither does the "Connected to Icon", the moment I eject the card it all springs to life?
Does anyone know the problem?
Thanks
I ran into this same issue trying to plug in to my stock radio through USB. When plugged in the radio is telling me "incompatible device". I have no problems with iPods. I've been trying to track the problem down and I'm not having any luck. Wondering if anyone can shed some light one this. Any help would be appreciated.
Hello,
yesterday my tablet fell off to the ground. The display is black now, but the tablet still running.
It's still connected to my Wi-Fi and when I plug in the USB the PC finds it as well.
Now my question, what can I do to recover my data (bring it into transfer mode) or even better, how to connect it to a display?
I have Google Chromecast here, but I don't know how to connect it without seeing anything on the screen.
Can anyone help me out and give some ideas?
Big thanks!