Plantronics M3000 turning off during a call - MDA II, XDA II, 2060 General

Hi all
I have a problem with my XDA II / Plantronics M3000 - the headset sometimes turns off in the middle of a call. It only started doing this after I upgraded the firmware (currently on ROM 1.60.00WWE and Radio 1.10.00).
The call doesn't get dropped (call timer still runs) but once the headset turns off then you can't hear the caller or vice versa. Can't find any way to transfer the call back to the handset either. Switch the headset on again and all is OK for a while.
Anyone else had this problem or got any suggestions for a fix?
Thanks in advance
Steve H

I have the same combination as yours, but it works fine.

Yup, I get that probem too with my bluetooth headset, the only solution i have found so far is a quick reset and then phone the person back

Known problem
Hi somewhere on this forum there is a thread confirming this headset is not working properly (i think it was confirmed by a australian headquarter)
so I called the dutch headquarter in Hoofddorp, and they confirmed to me that with the current rom's there is a problem with this headset, they say they are working on a solution, but recommanded me to return the headset to the shop

Re: Known problem
man_rot said:
Hi somewhere on this forum there is a thread confirming this headset is not working properly (i think it was confirmed by a australian headquarter)
so I called the dutch headquarter in Hoofddorp, and they confirmed to me that with the current rom's there is a problem with this headset, they say they are working on a solution, but recommanded me to return the headset to the shop
Click to expand...
Click to collapse
I have this combo too [M3000 BT with i-mate XDAII]. Plantronics tech support said there is a bug within Carrier Devices software for i-mate XDAII preventing effective operation. One of the last i-mate ROM updates messed up things with the M3000 BT. I've email Carrier but not heard anything yet. Also posted at Club-imate forum.

SteveH said:
Hi all
I have a problem with my XDA II / Plantronics M3000 - the headset sometimes turns off in the middle of a call. It only started doing this after I upgraded the firmware (currently on ROM 1.60.00WWE and Radio 1.10.00).
The call doesn't get dropped (call timer still runs) but once the headset turns off then you can't hear the caller or vice versa. Can't find any way to transfer the call back to the handset either. Switch the headset on again and all is OK for a while.
Anyone else had this problem or got any suggestions for a fix?
Thanks in advance
Steve H
Click to expand...
Click to collapse
The pocket BT tools fixed this on my Qtek 2020+M3000.
It is a problem related to the native BT stack. :twisted:
The only thing that will not work is the automatic timer on the BT tools: when it turns off the BT on the qtek, it also turns off the M3000.
But if you turn off the BT manually the headset stays on, so it is not a big issue.
I ran the debug version and sent the file to Tobias to fix this. Hope he will do it.

MadMurdoc said:
@uns1n
Du hast sicherlich GB drauf oder?
Hm bei dem einen klappt es wohl mit .am bei dem anderen, wie mir nicht, muss also jeder selbst finden was geht bzw. die App nutzen.
Click to expand...
Click to collapse
Richtig, bin mit 2.3.6 unterwegs.
Gesendet von meinem GT-N7000 mit Tapatalk 2

Related

XDA-II doesn't Pait With Sony Ericson HBH-15

Hi!
Recently I Bought a XDA-II and now i want to use it with my Sony Ericson HBH-15 bluetooth headset but XDA doent pair with it...
Kindly guide me in how to overcome with this problem or XDA doesnt support this pirticular models..
----
Sanjeev K Purohit
Had the same problem with my HBH-10, but found the solution.
You have to pair your HBH-15 with a Ericsson Phone, and then change the default passkey 0000 to a diffrent one, and then it should pair with your XDA II.
How to do so, check here
wormeyman.com/downloads/HBH10-R3B-EN.pdf
under 'changing the passkey'
A NEw Problem Now!!!
Thnx a lot bro!
But Now thr's a new problem..
Untill using MS bluetooth stack the call used to get transferred to HBH-15 but since I've installed Widdcom Bluetooth stach The widcom can pair with HBH but cant connect..
When I turn it Off and turn On MS bluetooth It transfers the call occasionally may once in five times...
Isnt thr a sure shot way(kinda some tool that will transfer the call to headset straight away...
Regards
Sanjeev :arrow:
yeah, but that's still the problem that no one got the Widcomm stack working a real 100% reliable. I know tha MS BT sucks because of the many missing profiles, and even worth it's not very 'stable' on my Magician, but still the best option. Sorry mate, but you probably have to live with it the way it is.

Could you guys please comment about my problem?

Hi All,
I seem to be having Bluetooth problems with my dutch t-mobile mda compact:
I am using a simple bluetooth headset - it's got no brand name - but I know it works fine beacuse before getting the mda compact I have used it with my Nokia 6310i and it works fine.
Anyhow, I pair the headset with my mda with no problem and it may work all day long without any problem - but... if for instance I leave the room with my headset - leaving the phone behind - which essentially disconnects the BT headset and the phone - when I come back the phone doesn't recognize the headset no matter what I do. The headset icon on the top of the phone disappears and oesn't come back. I reset the phone, I cliick on the headset answer button, I turn on and off the bluetooth on the phone, I switch on and off the headset - nothing helps!
The only solution that I found working is to delete the headset from the bluetooth devices in the mda and then rediscover the headset which works like a charm. All goes back to normal unitl the next time that it loses connection. I think the phone also sometimes loses connection when I am not using the headset for a long time (and hour or so)...
What can I do?? this is really driving me crazy. I have no problems when using the same headset with my nokia 6310i - but hey, I want to use the MDA!!!
My device: MDA COMPACT - T-Mobile Netherlands
Rom - 1.01.00 WWE
Radio - 1.00.10
Protocol - 1337.36
Ext Rom - 1.01.124 WWE
Thanks you guys for helping me
Ciao,
Lisa
hey Lisa..
i've noticed ur device informations are the following:
My device: MDA COMPACT - T-Mobile Netherlands
Rom - 1.01.00 WWE
Radio - 1.00.10
Protocol - 1337.36
Ext Rom - 1.01.124 WWE
they are too old :wink:
I have not experienced a problem like urs before,but i recommend u to upgrade ur device(the latest ROM version is 1.12.00,as much as i know :wink: ),u can find it in the ftp server,wich u can access from the wiki page(top left of ur page)...
if ur new to PDAs,then u have to know that ur device is a Magician,so search the ftp in the Magician folder :wink:
if u don't know how to upgrade ur device,u just have to ask,i will guide ur to the steps with pleasure
hope i've helped...
RAGO :lol:
Thanks Rago.
I was kind of wondering which one of the ROMs I should pick? When logging on to the FTP directory - there are lot's of shipped Magician Roms... Many show 112 - but which one should I take?
Is there any issue with the new Roms? Bluetooth problems?
Regards,
Lisa
hi lisa
best available workaround is to buy zenduris pocket zenphone software (do a search here at xda-developers). this program enables the headset profile permanently so your mda will be able to re-connect with your headset again, when you are back in the room.
cheers, lutz
Hi Lutz,
Thanks again for helping me
So you are using the word "workaround" - is this a known problem or it this just a problem with my device?
Am I to assume that there is a problem with the BT can can only be worked around and not solved permanently?
Does any of the new Roms solve this?
Bye,
Lisa
hi lisa
well there may be a rom that acts different but i won't force you to flash your device certain times with all the risks just to find out that it doesn't work! zenduris pocket zenphone really fixes the issue permanently and is definitely the best way to do it. i myself use the german o2 xda mini rom and it works well with my parrot ck3100 and reconnects with it the way it should while all the other (german) rom versions did not. but i guess you won't flash your device with a german rom, right...
cheers, lutz

Bluetooth Remote SIM access profil - RSAP

Hi,
I just received my new car which is delivered with a bluetooth connection which can be paired only with phones compatible with the Bluetooth Remote SIM access profil (RSAP).
It seems all the Nokia phones have that, of course the Wizard (m3000-qtek 9100) is not
Is there any way to change that or do you know if an updtate will change that?
Thanks for your help!
Up...
Ferator said:
Up...
Click to expand...
Click to collapse
My MDA has it with the latest UK ROM if thats any help ?
Terran
PS Whats the car ?
This is a volkswagen passat and i have the 2.17.7.106 running on my Qtek 9100.
which rom did u used
didd the problem solved and if yes i would like to know which rom did u used.
The car is a volkswgen passat. The same system is used on vw, audi and it seems that bmw joigned them.
I finally sold my qtek and went to nokia...

TyTN +BT-handsfree, Nokia BH801

Hi, I have a question if anyone here has tried to get the TyTN and Nokia´s new BT-handsfree BH801 to work?
TyTN finds and connects to the BH801, but they dont seem to work.
It all seems to work correct, activationcode is filled in, use as hansfree is activated.
Anyone got a solution??
Thanx!
By the way, NOKIA support says that the BH-801 only supports;
Bluetooth 2.0, 1.2 and 1.1 specification,
Handsfree 1.5 (HFP) and headset 1.1 (HSP) profiles.
Erik_S said:
Hi, I have a question if anyone here has tried to get the TyTN and Nokia´s new BT-handsfree BH801 to work?
TyTN finds and connects to the BH801, but they dont seem to work.
It all seems to work correct, activationcode is filled in, use as hansfree is activated.
Anyone got a solution??
Thanx!
Click to expand...
Click to collapse
I could not give you an answer to your problem, but can only let you that the Nokia HS-12W works great on the new AKU 3.3 ROM's. I have the WWE version on my TyTN and the only change I had to make was to activate the stereo setting in the A2DP registry.
Previously I had great deal of problems getting the same headset to work on the SA ROM 1.35. Bitpool changes in the registry as well as Sleuths A2DP fix were necessary.
By the way I have also had amazing results with the HTC BH S100 Bluetooth stereo headset. The great thing about this device is that it allows the user the option to use their own favourite 3.5mm headset.
Regards
Hi, and thanks for your reply.
It´s seems a bit tricky to get it working, fiddeling in the program isnt something as I would prefer getting in to, as I´m a noob!
But can anyone see if the profiles that NOKIA demands is supported in TyTN?
And if so, how can I get there??
By the way, I have a swedish TyTN with following setup;
ROM-version: 1.18.263.2
ROM-datum: 07/22/06
Radioversion: 1.07.01.10
Protokollversion: 32.40.7010.02H
ExtROM-version: 1.18.263.104
Thanks!

My headset bluetooth disconnects my GPS bluetooth

When I run Tomtom6 with my Emtac BT GPS,it works perfectly.
When I use my headset motorolla HP500, it works perfectly.
But when I launch my headset when using tomtom6,it always disconnects the GPS.
Coud someone help me,please?
I have the same problem with the original WM6 of Helmi.
I'm using the same ROM as you. Does anybody have this problem with the others ROMs?
Other roms have same problem!
HKLM\Comm\BTPAN1\Parms\MaxConnections maybe ? =)
slowmouse said:
HKLM\Comm\BTPAN1\Parms\MaxConnections maybe ? =)
Click to expand...
Click to collapse
No dice, I changed it from 1 to 2 and same results. It has been this way with every 6.x ROM I have flashed. Still waiting for a solution.
Bt problem
Hi !
And if we change the bluetooth broadcomm stack ? it was only an idea ....
Tamage
I also tried to increase the maxcommunications value with no success.
I haven't tried the stack software yet because in some posts, I've read that it solved the bluetooth file transfer but not our problem. Maybe I will try but I'm not confident on it.
I'm downloading the 6.1 ROM from PDAviet and will inform you in many minutes about my result.
Unfortunately, it's the same result with the 6.1ROM from PDAViet
I think that there isn't a solution for this problem...it's a limit of BT stack of BA.
No,it's not due do the BT stack of the BA because it runs perfectly with the original WM2003SE. It should be due to a BT different management from the OS WM5 and 6.
syl202gas said:
No,it's not due do the BT stack of the BA because it runs perfectly with the original WM2003SE. It should be due to a BT different management from the OS WM5 and 6.
Click to expand...
Click to collapse
Well it didn't run "perfectly"on WM2003SE. It also was a main problem on that OS too. Especially in receiving calls. The opposite site wasn't heard!
viscocesco said:
I think that there isn't a solution for this problem...it's a limit of BT stack of BA.
Click to expand...
Click to collapse
I presume you meant to say a limit of the BT hardware in the BA not the stack as the stack is software. This is a known bug in the WM5/6/6.1 ROMS, multiple connections works fine in WM2003SE but not in the hacked ROMS.
On my MDA3 it works fine, BT GPS and BT Headset together.
Have a look here.
But sound ist only working on phone, the voice/sound from navi won't come.
I tried BTAudioToggle but all I got was random noise.
Greets Rossi
syl202gas said:
When I run Tomtom6 with my Emtac BT GPS,it works perfectly.
When I use my headset motorolla HP500, it works perfectly.
But when I launch my headset when using tomtom6,it always disconnects the GPS.
Coud someone help me,please?
Click to expand...
Click to collapse
Install Broadcom 1.7

Categories

Resources