PW10A1 or PW10B1 can't identify - MDA, XDA, 1010 Software Upgrading

I have got two Wallaby. I bought from a guy, who killed the radio rom on a O2 XDA, bought a 1010 with a broken screen, and take the mainboard from the 1010 to the O2' case.
So I use a Qtek1010 mainboard in an O2 case.
My problem:
Booth of the devices there is a label in the back side, PW10A1. But if I go to the start->settings->device information->identify the Model No.: PW10B1
My IMEI number is equal with the IMEI printed on the 1010's case label. And as I wrote, on this label there is a PW10A1
I use Vodafone, and in my country they provide only at 1800MHz. The receive level is good, phone work well. (As I know, the PW10B1 model works on 1800MHz, but works fine at 1900MHz.)
Can I update the radio rom from here?
http://www.uspocketpcphone.com/id5.html
Thanks,
Sala

PW10A1 on the label = 900/1800.
PW10B1 on the label = 900/1900.
The probable reason for the disparity between your label id and your system id is that somebody has flashed the rom previously. The phone remains 900/1800.

Thank you!
Oh, its true.
I understand. The guy flashed with a Progamme B fro a PW10B1 device.
THX

Related

How to Change Siemens SX56 to be 900/1800 instead 900/1900

I bought siemens sx56 from AT&T & try to work in GSM 900/1800 but it is works only on 900/1900, The 900 cell phone works great but i want to work with my 1800 GSM phone.....I change it in the bootloader & "No signal" on the 1800 GSM phone!!!!
How can i change it to reallt works 900/1800?????
Maybe update the radio ver?
My 1800 service provider use the QTEK1010 (PW10A1) with
Rom ver: 3.16.52
Radio ver: 3.23.01
Siemens SX56 (PW10A1)
Rom ver: 3.17.03 ENG
Radio ver: A.20.10
Protocol ver: 324e4
With Special edition ROM 1.2
Yeap sounds like its time for a radio stack upgrade!
HTH
Did you get the device type from the rear sticker or the device info ??
The rear sticker is the main reference ... if it's still the same mother board of course! :lol:
If it's PW10A then RSU upgrade might help to get the 1800 MHz signal.
How to upgrade the radio stack & from where to get it?
Many many thanks
www.yorch.net the upgrades section
Little mistake - My model # on the rear sticker is PW10B1
Little mistake - My model # on the rear sticker is PW10B1, not PW10A1...
Can i still upgrade the stack radio to work with 900/1800?
Thanks
No.

How to downgrade a RSU?

I made a RSU upgrade to my xdaI and my phone aren't function at the moment...
it can't register to the network.
I live in portugal, and the original network is optimus.
How can i downgrade the rsu to is original state?
Tkx to all help
what's ur device type (A or B)?
what's ur operator band ?
what was the previous RSU version ?
Before all the changes my device is a:
Model - PW10A1
Rom Ver. - 3.17
Lang English
unfortunetly i dont know what is my RSU version I live in portugal and my operator is Otimus (if this can help!?!?!?!)
At the moment my device is:
Rom vers. - 4.01.16 ENG
Rom Date - 02/04/04
Radio version - 4.21.00
Protocol version - 32S54
The upgrade history is this:
I have a Qtek1010;
I install one version of T-Mobile Rom;
I upgraded with another version of t-mobile ruu and rsu.
After seeing that my cell phone didn't work i decided to install O2 rsu to see if it works... and it's unoperacional at the moment!
Any help?
Contact the dealer who sold you the Qtek and ask how you can get the latest officially supported version of OS and radio installed.

qtek 1010 PW10A1 how to make it work in canada

hi, amazing website i must say, but since im new to this site and lagging too in the info i would hence ask the question here to get the answer to my problems:
1) i have qtek 1010
ROM version 3.18.04 ENG
ROM date 05/22/03
Radio version: 3.25.01
protocol version 32S54
at the back: PW10A1
i have a middle east gsm roaming chip, which worked all over europe, but in canada it doesnt pick the local fido network. i believe my qtek is dual band not supporting the 1900mhz, how can i make it work for me ? could you please advise the steps ?
2nd question is:
my qtek is microsoft version 3.0.12039 (build 1178) does it need to be upgraded ? if yes with what software pls.
thank you in advance.
Guy
there is no way to make PW10A device to use 1900 ... but it should work for 900 if your network supports 900/1900
im trying to roam on fido , does fido use 900 ?
thanks

PLEASE Help Me... T-Mobile MDA NO Network Signal

Hello
I recently bought a MDA from eBay.co.uk (item 6370487252), it was described as unlocked BUT I have not been able to pickup any Network (i have tried all 4). Can some one Please have a look at the Details below and let me know if there is any possible way of making this work on ANY Uk Network :?: (GSM 900 or 1800)... I have tried to change it in the phone settings and also Tried to select GSM 900 from the Bootloader Menu BUT to No Avail...
---------------------------------------------------
Details
----------------------------------------------------
Rom Version - 4.01.16 ENG
Rom Date : 02/04/04
Radio Version - 6.25.02
Protocol Ver : 324e4
----------------------------------------------------
Hardware : PW10B1
Platform : Pocket PC 2003
---------------------------------------------------
Please reply IF you can help at all.... Many Thanks in Advance :?
Not sure if i really could help you. But your model is PW10B1 so you can only use 900/1900 GSM networks. There is no possibility to get it working on 1800.
Maybe this causes your problems...
Stefan
just flash to RSU Version 4.21-900-1800 and in GSM boot menu select 900-1800
redsonnic said:
just flash to RSU Version 4.21-900-1800 and in GSM boot menu select 900-1800
Click to expand...
Click to collapse
That would be a bad idea.
The Radio Stack depends on the hardware version. Since he has a PW10B modell, the device is just designed for 900/1900 Networks....
Flashing the 4.21could set the device as a paperweight...
Stefan

Qtek 1010 RSU

Hi,
I have a small problem and I don't know what to do.
As I disovered romkitchen I started to upgrade my qotek 1010 and now I see that on the back of my device it is written that it's a PW10A2 model and in my device information it is said that I have PW10B1.
As far sa I know PW10A2 means that I have a device 900/1800 and PW10B1 means 900/1900.
Is it very bad?
How should I deal with it?
my actual rom ver is 4.02.04 ENG and radio ver is 3.19.01 ( which I have also upgreaded before I'd read that it is better not to do so )
Thank you for all Help,
Orka
The naming in the ROM are fixed and do not depend on the real hardware settings. But that do not matter in using the device....
Stefan

Categories

Resources