Qtek 1010 RSU - MDA, XDA, 1010 Software Upgrading

Hi,
I have a small problem and I don't know what to do.
As I disovered romkitchen I started to upgrade my qotek 1010 and now I see that on the back of my device it is written that it's a PW10A2 model and in my device information it is said that I have PW10B1.
As far sa I know PW10A2 means that I have a device 900/1800 and PW10B1 means 900/1900.
Is it very bad?
How should I deal with it?
my actual rom ver is 4.02.04 ENG and radio ver is 3.19.01 ( which I have also upgreaded before I'd read that it is better not to do so )
Thank you for all Help,
Orka

The naming in the ROM are fixed and do not depend on the real hardware settings. But that do not matter in using the device....
Stefan

Related

Manipulator and Radio Software Vers. 4.21 an ROM 3.19.01 Ger

Does anybody have positive feedback that XDA Manipulator works with Radio Version 4.21 and my other configuration. It's a XDA from O2 Germany.
Kind regards
xdaman
Unlocking has nothing to do with RSU ... but if your ROM has Wmodem application, why don't you try the XDAunlock tool here www.xda-developers.com/XDAunlock/
yes, it does depend on your radio version, I know it doesn't work with *.23,
the highest version that I know it will work with is *.20.
not sure about 21.
( writing '*' since the first digit of the radio version does not seem to matter, it is sometimes also '3' or '6' )

Which Ver ?

Hi 2 all
what is the latest version of the Radio?
which Radio prvider could i use for my pda T-Mbile or O2 or ?
what is the latest version of the XDA-I ROM?
I have now...
Qtek 1010 PW10A1
ROM 4.00.11 ENG from the kitchen
Radio 4.16.00 frm O2
and wrok great but the need to change is calling?
If your radio stack is working, my advice is leave it alone, when you update to radio stack 4.21 you lost the ability to reset call counters, and imei manipulation via manipulator, also I dont think radio stack 4.21 is much good. You can upgrade the xda to WM2003 now that a real version has been released by Siemens ATT.
Thank you for responsing.
"You can upgrade the xda to WM2003 now that a real version has been released by Siemens ATT."
Were could i find it?
Is it compatible with Qtek 1010?

How to downgrade a RSU?

I made a RSU upgrade to my xdaI and my phone aren't function at the moment...
it can't register to the network.
I live in portugal, and the original network is optimus.
How can i downgrade the rsu to is original state?
Tkx to all help
what's ur device type (A or B)?
what's ur operator band ?
what was the previous RSU version ?
Before all the changes my device is a:
Model - PW10A1
Rom Ver. - 3.17
Lang English
unfortunetly i dont know what is my RSU version I live in portugal and my operator is Otimus (if this can help!?!?!?!)
At the moment my device is:
Rom vers. - 4.01.16 ENG
Rom Date - 02/04/04
Radio version - 4.21.00
Protocol version - 32S54
The upgrade history is this:
I have a Qtek1010;
I install one version of T-Mobile Rom;
I upgraded with another version of t-mobile ruu and rsu.
After seeing that my cell phone didn't work i decided to install O2 rsu to see if it works... and it's unoperacional at the moment!
Any help?
Contact the dealer who sold you the Qtek and ask how you can get the latest officially supported version of OS and radio installed.

My journey!

Hello!
I have been posting here for a little while now. Still my journey isn´t over . I am still looking for a free way to unlock this f**** phone. A Qtek S100 locked to Telia Sonera.
And:
Look at my specs below. Is there an upgrade that works for this phone anyware? If, where?
Thanks you great technicians, you rule!!!
My qtek s100:
ROM version 1.06.00 WWE
ROM date: 01/06/05
Radio version 1.05.00
Protocol version 1337.39
ExtROM version 1.06.116 WWE
qtek 1.11 rom is available on the qtek site / ftp here, so you shouldnt having a problem upgrading, there isnt however a free utility to unlock the device. It's either you call sonera and pay whatever they charge or use the services of imei check
rgds
jim[/url]
Thanks!
Hey Jfran!
Can you please provide a link to the Qtek 1.11 rom upgrade?
Thanks
Björn
WaspWorld said:
Hello!
I have been posting here for a little while now. Still my journey isn´t over . I am still looking for a free way to unlock this f**** phone. A Qtek S100 locked to Telia Sonera.
And:
Look at my specs below. Is there an upgrade that works for this phone anyware? If, where?
Thanks you great technicians, you rule!!!
My qtek s100:
ROM version 1.06.00 WWE
ROM date: 01/06/05
Radio version 1.05.00
Protocol version 1337.39
ExtROM version 1.06.116 WWE
Click to expand...
Click to collapse
Have you tried http://www.imei-check.co.uk/ to unlock your phone? They say they can unlock the Magacian...
Hey Mashie!
Thanks for the info but they cost money and require that you send a copy of your ID.
Thanks anyway!
Björn

QTEK 1010 - upgrade help

A friend of mine has QTEK 1010 device (which I suppose is thie Wallaby). The current details is as follows,
Details given under System Details
ROM version 3.14.06 ENG
ROM DATE : 10/01/02
Radio version T313
Protocol Version 32554
Hardware ARM SA1110 Speed 206Mhz
RAM size 64Mb
Flash 32Mb.
I checked the WIKI page. Which ROM version can I download??
- QTEK English 3.16.13 ???? is the latest for QTEK. Should I use this
- T-Mobile English 4.01.16 ??? This has latest version #, can I use this??
please advice..
you can use all these
http://lumpistefan.dyndns.org/
You can use all ROMs listed in Wiki.
If you want to upgrade to WM2003 i would suggest to use the 4.01.12.
Otherwise you could use the 3.20.06 or 3.17.03
Stefan
I had given the 3.18 version the last one listed in the QTEK - ENGLISH version. Works like charm now...

Categories

Resources