hi, amazing website i must say, but since im new to this site and lagging too in the info i would hence ask the question here to get the answer to my problems:
1) i have qtek 1010
ROM version 3.18.04 ENG
ROM date 05/22/03
Radio version: 3.25.01
protocol version 32S54
at the back: PW10A1
i have a middle east gsm roaming chip, which worked all over europe, but in canada it doesnt pick the local fido network. i believe my qtek is dual band not supporting the 1900mhz, how can i make it work for me ? could you please advise the steps ?
2nd question is:
my qtek is microsoft version 3.0.12039 (build 1178) does it need to be upgraded ? if yes with what software pls.
thank you in advance.
Guy
there is no way to make PW10A device to use 1900 ... but it should work for 900 if your network supports 900/1900
im trying to roam on fido , does fido use 900 ?
thanks
Related
I bought siemens sx56 from AT&T & try to work in GSM 900/1800 but it is works only on 900/1900, The 900 cell phone works great but i want to work with my 1800 GSM phone.....I change it in the bootloader & "No signal" on the 1800 GSM phone!!!!
How can i change it to reallt works 900/1800?????
Maybe update the radio ver?
My 1800 service provider use the QTEK1010 (PW10A1) with
Rom ver: 3.16.52
Radio ver: 3.23.01
Siemens SX56 (PW10A1)
Rom ver: 3.17.03 ENG
Radio ver: A.20.10
Protocol ver: 324e4
With Special edition ROM 1.2
Yeap sounds like its time for a radio stack upgrade!
HTH
Did you get the device type from the rear sticker or the device info ??
The rear sticker is the main reference ... if it's still the same mother board of course! :lol:
If it's PW10A then RSU upgrade might help to get the 1800 MHz signal.
How to upgrade the radio stack & from where to get it?
Many many thanks
www.yorch.net the upgrades section
Little mistake - My model # on the rear sticker is PW10B1
Little mistake - My model # on the rear sticker is PW10B1, not PW10A1...
Can i still upgrade the stack radio to work with 900/1800?
Thanks
No.
Hello
I recently bought a MDA from eBay.co.uk (item 6370487252), it was described as unlocked BUT I have not been able to pickup any Network (i have tried all 4). Can some one Please have a look at the Details below and let me know if there is any possible way of making this work on ANY Uk Network :?: (GSM 900 or 1800)... I have tried to change it in the phone settings and also Tried to select GSM 900 from the Bootloader Menu BUT to No Avail...
---------------------------------------------------
Details
----------------------------------------------------
Rom Version - 4.01.16 ENG
Rom Date : 02/04/04
Radio Version - 6.25.02
Protocol Ver : 324e4
----------------------------------------------------
Hardware : PW10B1
Platform : Pocket PC 2003
---------------------------------------------------
Please reply IF you can help at all.... Many Thanks in Advance :?
Not sure if i really could help you. But your model is PW10B1 so you can only use 900/1900 GSM networks. There is no possibility to get it working on 1800.
Maybe this causes your problems...
Stefan
just flash to RSU Version 4.21-900-1800 and in GSM boot menu select 900-1800
redsonnic said:
just flash to RSU Version 4.21-900-1800 and in GSM boot menu select 900-1800
Click to expand...
Click to collapse
That would be a bad idea.
The Radio Stack depends on the hardware version. Since he has a PW10B modell, the device is just designed for 900/1900 Networks....
Flashing the 4.21could set the device as a paperweight...
Stefan
Hi I have the SX56, it's a ATT I'm using it for Cingular in Puerto Rico... I need to know if I can change the radio so it work on 850/1900. I'm new at this so if someone can help me!!!!!!!!!!
May contact me at [email protected]
Thanks!!!!
ROM version: 4.01.16 ENG
ROM Date: 2/4/04
Radio Version A.33.02
Protocol Version 1.3.3
well i guess no one can help me on that... thanks anyways!!
http://wiki.xda-developers.com/index.php?pagename=ChangingBandsWithBootloader
http://wiki.xda-developers.com/index.php?pagename=BandSwitchTool
Not very difficult to find....
Stefan
Not dificult to find?? where do i find it??? i have been checking around and can't find anything.. maybe it because my english is not that good.. !!
The sx56 cannot operate on the 850 band as far as I know, the only version I have seen are version A or B, A works on 900/1800 and B works on 900/1900.
Hi, my SX 56 (PW10B1) isn't working on Brazil because the GSM net is 900/1800. It's possible to make any think to change this reality?
Say, any version of pda softwares or another creator can change 900/1900 to 900/1800 or 900? I saw this kind of software on NET but isn't working properly (BANDSWITCH - XDA developers). This is a a beta version and dont work. Anyone knows any good software for this? If i upgrade system it can be works? can i get a better version of O.S for my SX 56 for free? Sorry for my poor english.
But tanks for ur help.
My radio version do it diference? I'm using special Edition ROM v. 1.2.. My processor is a 206mhz ARM SA1110 ROM 3.17.03 ENG - 05/15/03. Radio Version A.20.10 324e4
900/1900 is a hardware limitation of the device.
You can´t make the device to work properly on 900/1800.
You just can try setting it to GSM 900.
You can do this in the bootloader.
Enter bootloader, press the calendar button and select GSM 900
But pay attention entering the bootloader is the same a a hard reset. All your data will be lost....
Stefan
Hi All, I have just aquired a second hand XDA 2 with a USA Rom.
ROM Ver- 1.03.00 USA
ROM Date 09/24/03
Radio Ver 1.05.12
Protocol Ver 1337.12
I am based in the UK.
Please can anyone tell me what this means.
Is this the same as an English rom?
If not what are the differences?
I have unlocked the device and a T-mob phone card works ok.
Thanks in advance Grez
yes unlocked it should work just fine but likely the gprs and mms settings would be preset to the us operator
but you could change those
it's triband so it's 900/1800/1900 so like nokida or what ever it should work everywhere
USA Rom
Thanks for that Rudegar, that's more or less what I thought.