Hello I have a big problem. I bought an bluetooth dongle and i cant connect my QTEK2020 to my pc via bluetooth. I tried to set a lot of settings but i just can not do it.so i need help. If anyone knows the exact settings for qtek2020 and MSIbluetooth dongle . thanx
goran from slovenia
I had a damm similar problem as i could not sync the device via bluetooth.
I have an XDA2 and upgraded my rom to the o2 release from last week. I was hoping that all the serial profile issues would have been resolved in respect to bluetooth gps, but it just made things worse as there are no obvious setting in which i can assign a serial profile to a particular port or even get activesync to work no matter what.
So finally I gave in and downloaded the Bluetooth Tools by Towas again and installed them. Straight away my xda2 was bonding with my gps again and when u add ur pc as a new device (new bonding), under the bluetooth tools u simply select activesync. then u can straight away sync initiated by the xda2 and once a connection is established, u get automatically internet access.
another issue was that my bluetooth software on the pc created too many 'dummy' serial com ports for bluetooth which didnt actually work, so i ended up removing them all under the device manager (windows system- hardware) and then setting up a new bluetooth serial port on my pc (make sure u set up just one).
get the bluetooth tools from:
http://www.bluetooth.i-networx.de
Yeh, 15 serial ports my bluetooth dongle software set up on my pc, whats all that about, greedy or what?
15 :shock: !! Haha..
I only have 1 I think
Rob. 8)
Related
I recently got a Bluetooth dongle for my PC but can't get my XDA-II to use any of the services !
When I select ActiveSync and the Sync with Bluetooth I get
'Cannot start communications with the desktop computer. The communications prt is not available. Another program may be using the port, or it may not be valid.
Quit any programs that may be using the port and reconnect. If the problem persists, restart your device using the instructions provided by the manufacturer.'
When I choose Bluetooth settings and select 'Bluetooth ActiveSync Setup'->Start on the XDA II I get 'Please bond with other Bluetooth device which supports serial port or ActiveSync profile as your ActiveSync partner !
The PC has the ActiveSync service enabled and I am now stuck. Please help.
Try this utility.
http://bluetooth.i-networx.de/index_e.html
Install it, do a soft reset. Delete previous BT connection and find again.
you should get an option to sync on your XDA II with the specific computer.
:wink:
ActiveSync Via Bluetooth with Troy Windport
Have tried all suggestiosn including http://bluetooth.i-networx.de/index_e.html
Activesync starts to connect an then drops the connection
Have w2k, ActiveSync 3.7.1 and TRoy Windport bluetooth PCMCIA card, XDA II with Latest 6.10.50 upgrade
Only option left is to change/upgrade operating system to XP which I do not want to do.
Anybody got a better idea?
Thanks
[email protected]
try following this tutorial at geekzone
http://www.geekzone.co.nz/content.asp?contentid=2417
try to turn off infrared communication on ppc.
try to delete all bounded devices both pc and xda.
try to search for a bt device again.
You have to follow the above mentioned procedure. After that you start to search the device with ActiveSync.
ActiveSync will start to check all the serial ports, one port before it comes to the port that is used by your BT stack, you should start ActiveSync via BT on your XDAII.
This is the only way (for me) to get that crap working. After the XDAII and the computer have found each other, future syncs via BT are no (or at least not a big) problem. If the XDAII and the computer sometimes dot not find each other, try to sync 2-3 times, it will hopefully work then. Sometimes there seems a kind of timeout error.
I don't use BT anymore 'cause it is really a hard job to get it running. Even when I managed to establish the connection, after some days the connection gets lost again and can only be repaired by re-installing the BT stack or ActiveSync - I am really tired of beta testing all the bluetooth stacks and stopped to use it until the industry established a working standard...
I try a lot of time after install Tobias application for BT, but I can not see the new dialog after pair my XDA II with PC. Someone help me!
I had the exact same experience. I have not sorted out my the BT problems yet but suffered also from the interrupted connection using the cradle until I disabled Norton anti-virus and firewall.
HELP!
No connection possible between my PC and MDA-II.
Bluetooth Devices program in Windows XP SP2 comes up with "incoming port: 17", while ActivSync seraches only ports 1 to 9.
How can I make them listen to the same port?
http://www.geekzone.co.nz/content.asp?contentid=3163
this guide solved my sp2 bluetooth problems
Rudegar said:
http://www.geekzone.co.nz/content.asp?contentid=3163
this guide solved my sp2 bluetooth problems
Click to expand...
Click to collapse
Rudegar, I used this website for setup, but that Bluetooth-port problem still exists
are you using the vidcomm bluetooth stack or the ms one ?
are you using the bluetooth tools url'd to in this threaD ?
Rudegar said:
are you using the vidcomm bluetooth stack or the ms one ?
are you using the bluetooth tools url'd to in this threaD ?
Click to expand...
Click to collapse
I downloaded de Microsoft SP2 drivers (as mentioned at that Geekzone url).
i'm talking on the xda not on the pc
Rudegar said:
i'm talking on the xda not on the pc
Click to expand...
Click to collapse
On MDA-II I didnt change anything. I use the same drivers as provided within ROM 1.72.
I have read all about the bluetooth i need to know to configure the XDAII to work with the comp. Problems i encounter are
1. THey get paired with the auth keys i put in! but the services that i wanna retrieve from the comp on the XDAII itself cannot be view, all i get from Bluetooth>Bonded Devices>Desktop are 1. rename 2. delete. Is it suppose to be that way?
2.Now the vice versa, when i wanna retrieve the services from the XDAII on my comp it gives me only 1 choice, and that is DUN or Dial-Up Networking? and i on the right track?
3. Downloaded the stupid Bluetooth software for the comp and the software cannot seem to detect my XDAII
4.Downloaded the Pocket Bluetooth tools, thinking that it will solve all problems, i am still stuck there!!
I only in my early twenties but i seem bald enough from the stress i get at work, now with this stupid dongle that i bought from Auction it seems to me that i am already bald! Pls some1 just guide me along this... Another other tools or softwares to get???
1 last thing just to let all out there know... I am running on a XP platform with the latest T-mobile 1.72 rom in my XDAII.
From what i understand the XDAII has only a stripped down bluetooth stack. I would like to use a Crabat bluetooth dongle to receive MP3 over bluetooth but this to will have to wait until someone v.clever does a very serious driver package.
From what i think now is the BT stack in XDA 2 is not compitable with the widcom BT stack in my comp! thats the prob any soultions to it? somehow i manage to get it sync but error to the com port saying other programs are using the comp port. Well i getting balder by the seconds! its already 0500 in Singapore!!!
I give up. First when i use the bluetoothGPS i can get an outgoing port to recongize on XP then when i uninstall that, the outgoing port also just dissappear. Can some1 explain to me what is happening? When i download the pocket BT tools. I only get an incoming port from the XDA2 is it suppose to be that way?? Shouldn't i be having a outgoinport to sync too??
FINALLY
I got it to work finally with another bluetooth dogle i bought. An advice to all ppl trying to do bluetooth out there. Always get the class 1 (100m) bluetooth dogle, always a better range!! XDA2 can go out to 30 m. With the new bluetooth stack + bluetooth tools it is good!!! Finally i got it to work with help from http://forum.xda-developers.com/viewtopic.php?t=5237&highlight=active+sync+bluetooth
Hey guys,
I got it to work once. But I have no idea how to make my iMate Jam connect to my PC's bluetooth connection using the Wireless Modem application on my Jam. Eveytime I fiddle around with that software it ends up screwing with my radio signal and I lose the signal. Then I have to reboot the phone to make it work again. Does anyone have any instruction on how to work this program? This seems to be so much harder than my P900 which I just used the Dial-up Bluetooth Modem and had it dial *99#. By the way I'm using the standard Windows XP Bluetooth stack with my USB Bluetooth adapter. Please help.
i've the same problem... anyone as a solution?
bt modem tip
On my sx66, i noticed i was having a problem with my modem connection, I noticed it wouldnt let me connect if I had already initiated a gprs session, ie. syncronizing with my excahnge server or pop mail accounts or web browsing on the pda. If i soft booted then connected the dial up connection it worked fine. In some cases i have heard some peoples PC would drop the DUN setting after every sesssion with the PC's BT settings.
rovert said:
Hey guys,
I got it to work once. But I have no idea how to make my iMate Jam connect to my PC's bluetooth connection using the Wireless Modem application on my Jam. Eveytime I fiddle around with that software it ends up screwing with my radio signal and I lose the signal. Then I have to reboot the phone to make it work again. Does anyone have any instruction on how to work this program? This seems to be so much harder than my P900 which I just used the Dial-up Bluetooth Modem and had it dial *99#. By the way I'm using the standard Windows XP Bluetooth stack with my USB Bluetooth adapter. Please help.
Click to expand...
Click to collapse
This is why it's worth following my blog - I've published a tutorial of this over a month ago. Please read http://www.pocketpcmag.com/blogs/index.php?blog=3&p=510&more=1
Forget the wireless modem application, it's not necessary for this for me.
Go to your PC's bluetooth and open it up. Is et Widcomm? Pair the phone with the PC.
ok, on the PC click on the paired phone and click search for available services. SSA should come up.
Set up a dial up connection with phone no *99# any username, password for your provider and it should connect. PLEASE' Note, you must be DISCONNECTED from GPRS on the phone first to make a connection from your PC.
You may also have to put in an APN on the bluetooth modem in Windows XP, Control Panel, phones and Modem options, as supplied by your provider. First let us know if you get as for as finding SSA?
Surgy, ignore last post, I just saw yin said you are using MS Bluetooth stack.
admisi said:
Surgy, ignore last post, I just saw yin said you are using MS Bluetooth stack.
Click to expand...
Click to collapse
You can also use the DUN from the MS BT stack too.
Your tutorial only covers the newer devices with WM5. I'm using an older i-Mate Jam/Magician and when I do a discovery with my Bluetooth adapter on my PC I only see OBEX File Transfer, Serial Port, and Voice Gateway. I still can't figure out a way to do it wirelessly. I have figured out how to do it via USB cable and the Wireless Modem program on the Pocket PC but it's only a 28.8 connection whereas usually I connect at 56K with my Sony Ericsson P900. Strange stuff. Well I'll be upgrading to a Jamin shortly so I hope this will resolve my problem.
rovert said:
Your tutorial only covers the newer devices with WM5. I'm using an older i-Mate Jam/Magician and when I do a discovery with my Bluetooth adapter on my PC I only see OBEX File Transfer, Serial Port, and Voice Gateway. I still can't figure out a way to do it wirelessly. I have figured out how to do it via USB cable and the Wireless Modem program on the Pocket PC but it's only a 28.8 connection whereas usually I connect at 56K with my Sony Ericsson P900. Strange stuff. Well I'll be upgrading to a Jamin shortly so I hope this will resolve my problem.
Click to expand...
Click to collapse
OIC. Strange. Some (for example, Verizon) PPC PE devices are crippled in that they can't be used as BT modems.
If you can't see the DUN or SSA or Dial Up. it sounds like your Bluetooth has been modified on the imate jam/mini.
Did you install either the Blue Soleil Stack or the new BLUETOOTH STOCK from this forum?.. If so, then this is the problem. Standard default Bluetooth Stack should show it in discovery.
What make is your bluetooth dongle?
admisi said:
If you can't see the DUN or SSA or Dial Up. it sounds like your Bluetooth has been modified on the imate jam/mini.
Did you install either the Blue Soleil Stack or the new BLUETOOTH STOCK from this forum?.. If so, then this is the problem. Standard default Bluetooth Stack should show it in discovery.
What make is your bluetooth dongle?
Click to expand...
Click to collapse
I did upgrade it to the new bluetooth stack. I guess it did more harm than good. Is there anyway to undo it or must I hard reset and install everything all over again? I have a Logitech Dinovo Bluetooth Keyboard/Mouse combo.
Hi all. I've used my Qtek with TOMTOM and a bluetooth GPS antenna for many time. Some days ago, the system don't run anymore.
The problem is in the Universal Bluetooth: I can find and add bluetooth devices but, when i use it, there is not communication. So, for example, i can connect my Universal with GPS antenna in the bluetooth section, but TOMTOM tell me that there isn't a GPS antenna. Also, i can link via bluetooth my Universal with the notebook, but i cannot start an Activesynk session via bluetooth: it tell me that no pcs are connected even if in the bluetooth list there is my pc and in the service list there is "activesynk" and it is activated.
Now, it is a software or an hardware problem? Any idea? I've anjlurned my software at the AKU 3.2 last italian ROM, but it didn't help.
Thanks in andvance for the help and sorry for my english.
Idum
UP
Pls help me. In what manner i can test if it is an hardware problem or only a software problem?
Idum
I have same problem ...
but still dont know the way how to fix
First
For TT to work with your bt gps you have to create a unsecured incoming port, take COM0 or any other number.
then it should already work in TT, if it not select in TT a GPS receiver and select com0
You have to create a com port for the BT connection and enable that com port in your AS on your pc.
To sync with AS over BT you have to select Connect with BT on your Device!!!
i cannot sync via bluetooth......my laptop detects and its paired too...no incoming or outgoing ports are seen....i hve 2 BA both upgraded to WM6... working allright ....please somebody help
Well, you didn't exactly give much information.
What do you mean "no incoming or outgoing ports are seen"? What do you get when you go into activesync on the angel and tell it to connect via bluetooth?
you must have enabled on your PC BT dongle one incoming and one outgoing com port, also in activesync on your pc in connection settings you must check that activesync to accept connection on your incoming port. Then the sync over BT will be possible
bluetooth
thank you explode I have done it now
What settings do I need to fill up?
Hi anyone who can help me,
I am trying to sync via bluetooth... I can connect both laptop and BA .. however, I dont know what else I need to do to make them sync via bluetooth..
I dont understand where to set up the com in and out.
would someone be kind enuf to guide me step by step please .. excluding pairing devices since that is straight forward.
Cheers
Maybe the same here
I have installed WM6 on my N560 and now I cannot send files from my computer to my pda. The pc sais that the pda does not accepts this service.
Any ideea?
Workaroung to service not available
ungureanub said:
I have installed WM6 on my N560 and now I cannot send files from my computer to my pda. The pc sais that the pda does not accepts this service.
Any ideea?
Click to expand...
Click to collapse
I have the same problem, just enable the beam in the connections manager, then enable the bluetooth as well , then set bluetooth to discoverable in the bluetooth settings then everything works fine.
It seems the beam must be enabled as well for some reason.
Would love to know if there is a more elegant solution though.
I can create only incoming port on PC. When I try to create the outcoming port, he try to find the device (BA) but don´t find it. Help....
well like my phone after updating it to wm6 6.1 i cant recieve anything shared on bluetooth, my phone is discoverable but nothing can send into it because it says it fails! can anyone help??
iixxboredumxxii said:
well like my phone after updating it to wm6 6.1 i cant recieve anything shared on bluetooth, my phone is discoverable but nothing can send into it because it says it fails! can anyone help??
Click to expand...
Click to collapse
Me neather... someone can help?
Radio Upgrade
Hi everyone, sorry if I post this in the bad place but I search for the radio upgrade at the wiki and I wanned to upgrade to version 1.13 BUT the link seams to be broken or something. Anyway, I was wondering if any of you can upload this from rapidshare or give me another link because I want to test the improvement. Thanks!