i cannot sync via bluetooth......my laptop detects and its paired too...no incoming or outgoing ports are seen....i hve 2 BA both upgraded to WM6... working allright ....please somebody help
Well, you didn't exactly give much information.
What do you mean "no incoming or outgoing ports are seen"? What do you get when you go into activesync on the angel and tell it to connect via bluetooth?
you must have enabled on your PC BT dongle one incoming and one outgoing com port, also in activesync on your pc in connection settings you must check that activesync to accept connection on your incoming port. Then the sync over BT will be possible
bluetooth
thank you explode I have done it now
What settings do I need to fill up?
Hi anyone who can help me,
I am trying to sync via bluetooth... I can connect both laptop and BA .. however, I dont know what else I need to do to make them sync via bluetooth..
I dont understand where to set up the com in and out.
would someone be kind enuf to guide me step by step please .. excluding pairing devices since that is straight forward.
Cheers
Maybe the same here
I have installed WM6 on my N560 and now I cannot send files from my computer to my pda. The pc sais that the pda does not accepts this service.
Any ideea?
Workaroung to service not available
ungureanub said:
I have installed WM6 on my N560 and now I cannot send files from my computer to my pda. The pc sais that the pda does not accepts this service.
Any ideea?
Click to expand...
Click to collapse
I have the same problem, just enable the beam in the connections manager, then enable the bluetooth as well , then set bluetooth to discoverable in the bluetooth settings then everything works fine.
It seems the beam must be enabled as well for some reason.
Would love to know if there is a more elegant solution though.
I can create only incoming port on PC. When I try to create the outcoming port, he try to find the device (BA) but don´t find it. Help....
well like my phone after updating it to wm6 6.1 i cant recieve anything shared on bluetooth, my phone is discoverable but nothing can send into it because it says it fails! can anyone help??
iixxboredumxxii said:
well like my phone after updating it to wm6 6.1 i cant recieve anything shared on bluetooth, my phone is discoverable but nothing can send into it because it says it fails! can anyone help??
Click to expand...
Click to collapse
Me neather... someone can help?
Radio Upgrade
Hi everyone, sorry if I post this in the bad place but I search for the radio upgrade at the wiki and I wanned to upgrade to version 1.13 BUT the link seams to be broken or something. Anyway, I was wondering if any of you can upload this from rapidshare or give me another link because I want to test the improvement. Thanks!
Related
Hello I have a big problem. I bought an bluetooth dongle and i cant connect my QTEK2020 to my pc via bluetooth. I tried to set a lot of settings but i just can not do it.so i need help. If anyone knows the exact settings for qtek2020 and MSIbluetooth dongle . thanx
goran from slovenia
I had a damm similar problem as i could not sync the device via bluetooth.
I have an XDA2 and upgraded my rom to the o2 release from last week. I was hoping that all the serial profile issues would have been resolved in respect to bluetooth gps, but it just made things worse as there are no obvious setting in which i can assign a serial profile to a particular port or even get activesync to work no matter what.
So finally I gave in and downloaded the Bluetooth Tools by Towas again and installed them. Straight away my xda2 was bonding with my gps again and when u add ur pc as a new device (new bonding), under the bluetooth tools u simply select activesync. then u can straight away sync initiated by the xda2 and once a connection is established, u get automatically internet access.
another issue was that my bluetooth software on the pc created too many 'dummy' serial com ports for bluetooth which didnt actually work, so i ended up removing them all under the device manager (windows system- hardware) and then setting up a new bluetooth serial port on my pc (make sure u set up just one).
get the bluetooth tools from:
http://www.bluetooth.i-networx.de
Yeh, 15 serial ports my bluetooth dongle software set up on my pc, whats all that about, greedy or what?
15 :shock: !! Haha..
I only have 1 I think
Rob. 8)
I recently got a Bluetooth dongle for my PC but can't get my XDA-II to use any of the services !
When I select ActiveSync and the Sync with Bluetooth I get
'Cannot start communications with the desktop computer. The communications prt is not available. Another program may be using the port, or it may not be valid.
Quit any programs that may be using the port and reconnect. If the problem persists, restart your device using the instructions provided by the manufacturer.'
When I choose Bluetooth settings and select 'Bluetooth ActiveSync Setup'->Start on the XDA II I get 'Please bond with other Bluetooth device which supports serial port or ActiveSync profile as your ActiveSync partner !
The PC has the ActiveSync service enabled and I am now stuck. Please help.
Try this utility.
http://bluetooth.i-networx.de/index_e.html
Install it, do a soft reset. Delete previous BT connection and find again.
you should get an option to sync on your XDA II with the specific computer.
:wink:
ActiveSync Via Bluetooth with Troy Windport
Have tried all suggestiosn including http://bluetooth.i-networx.de/index_e.html
Activesync starts to connect an then drops the connection
Have w2k, ActiveSync 3.7.1 and TRoy Windport bluetooth PCMCIA card, XDA II with Latest 6.10.50 upgrade
Only option left is to change/upgrade operating system to XP which I do not want to do.
Anybody got a better idea?
Thanks
[email protected]
try following this tutorial at geekzone
http://www.geekzone.co.nz/content.asp?contentid=2417
try to turn off infrared communication on ppc.
try to delete all bounded devices both pc and xda.
try to search for a bt device again.
You have to follow the above mentioned procedure. After that you start to search the device with ActiveSync.
ActiveSync will start to check all the serial ports, one port before it comes to the port that is used by your BT stack, you should start ActiveSync via BT on your XDAII.
This is the only way (for me) to get that crap working. After the XDAII and the computer have found each other, future syncs via BT are no (or at least not a big) problem. If the XDAII and the computer sometimes dot not find each other, try to sync 2-3 times, it will hopefully work then. Sometimes there seems a kind of timeout error.
I don't use BT anymore 'cause it is really a hard job to get it running. Even when I managed to establish the connection, after some days the connection gets lost again and can only be repaired by re-installing the BT stack or ActiveSync - I am really tired of beta testing all the bluetooth stacks and stopped to use it until the industry established a working standard...
I try a lot of time after install Tobias application for BT, but I can not see the new dialog after pair my XDA II with PC. Someone help me!
I had the exact same experience. I have not sorted out my the BT problems yet but suffered also from the interrupted connection using the cradle until I disabled Norton anti-virus and firewall.
HELP!
No connection possible between my PC and MDA-II.
Bluetooth Devices program in Windows XP SP2 comes up with "incoming port: 17", while ActivSync seraches only ports 1 to 9.
How can I make them listen to the same port?
http://www.geekzone.co.nz/content.asp?contentid=3163
this guide solved my sp2 bluetooth problems
Rudegar said:
http://www.geekzone.co.nz/content.asp?contentid=3163
this guide solved my sp2 bluetooth problems
Click to expand...
Click to collapse
Rudegar, I used this website for setup, but that Bluetooth-port problem still exists
are you using the vidcomm bluetooth stack or the ms one ?
are you using the bluetooth tools url'd to in this threaD ?
Rudegar said:
are you using the vidcomm bluetooth stack or the ms one ?
are you using the bluetooth tools url'd to in this threaD ?
Click to expand...
Click to collapse
I downloaded de Microsoft SP2 drivers (as mentioned at that Geekzone url).
i'm talking on the xda not on the pc
Rudegar said:
i'm talking on the xda not on the pc
Click to expand...
Click to collapse
On MDA-II I didnt change anything. I use the same drivers as provided within ROM 1.72.
I have read all about the bluetooth i need to know to configure the XDAII to work with the comp. Problems i encounter are
1. THey get paired with the auth keys i put in! but the services that i wanna retrieve from the comp on the XDAII itself cannot be view, all i get from Bluetooth>Bonded Devices>Desktop are 1. rename 2. delete. Is it suppose to be that way?
2.Now the vice versa, when i wanna retrieve the services from the XDAII on my comp it gives me only 1 choice, and that is DUN or Dial-Up Networking? and i on the right track?
3. Downloaded the stupid Bluetooth software for the comp and the software cannot seem to detect my XDAII
4.Downloaded the Pocket Bluetooth tools, thinking that it will solve all problems, i am still stuck there!!
I only in my early twenties but i seem bald enough from the stress i get at work, now with this stupid dongle that i bought from Auction it seems to me that i am already bald! Pls some1 just guide me along this... Another other tools or softwares to get???
1 last thing just to let all out there know... I am running on a XP platform with the latest T-mobile 1.72 rom in my XDAII.
From what i understand the XDAII has only a stripped down bluetooth stack. I would like to use a Crabat bluetooth dongle to receive MP3 over bluetooth but this to will have to wait until someone v.clever does a very serious driver package.
From what i think now is the BT stack in XDA 2 is not compitable with the widcom BT stack in my comp! thats the prob any soultions to it? somehow i manage to get it sync but error to the com port saying other programs are using the comp port. Well i getting balder by the seconds! its already 0500 in Singapore!!!
I give up. First when i use the bluetoothGPS i can get an outgoing port to recongize on XP then when i uninstall that, the outgoing port also just dissappear. Can some1 explain to me what is happening? When i download the pocket BT tools. I only get an incoming port from the XDA2 is it suppose to be that way?? Shouldn't i be having a outgoinport to sync too??
FINALLY
I got it to work finally with another bluetooth dogle i bought. An advice to all ppl trying to do bluetooth out there. Always get the class 1 (100m) bluetooth dogle, always a better range!! XDA2 can go out to 30 m. With the new bluetooth stack + bluetooth tools it is good!!! Finally i got it to work with help from http://forum.xda-developers.com/viewtopic.php?t=5237&highlight=active+sync+bluetooth
Hi all,
I've enabled the registry change that will allow the MDA to RECEIVE files from another BT device, such as my laptop. But when I tried to do so, I receive an error on the laptop saying "FTP service not found on target device".
Does this means that one can NOT send a files to the MDA?
I run the Qtek AKU2 ROM and I have the same problem with my XP machine (I haven't done any registry changes though). The weird thing is though, that I can send files to the Wizard from my Mac or my other Linux phone. But it's just XP with an Anycom (Broadcom firmware) usb BT dongle that doesn't send files to the Wizard.
It's good to know that I am not the only one having this problem!
My MDA (HTC Wizard) is running 2.17 ROM and my XP machine is running the Widcom BT driver 1.4.2.2.
Anyone else can help?
I also have this problem. I have Qtek S200 with Aku2, a portuguese rom, and the latest Widcomm 5.1.2500. If this is by default, another disappoitment from M$****
Erm, guys, please check this....
To be able to recieve BT incoming transfer you need to have a tick on
Start>Settings>Connections>Beam
jamichy said:
tick on
Start>Settings>Connections>Beam
Click to expand...
Click to collapse
Thanks for that. I was previously under the impression that the option you mentioned was for Infra-Red only as I could accept BT files all day long on my old X50v with it turned off
jamichy said:
Erm, guys, please check this....
To be able to recieve BT incoming transfer you need to have a tick on
Start>Settings>Connections>Beam
Click to expand...
Click to collapse
I don't see any Beam on the connections window... Am I missing anything??
i cant see the connection of turning on the infra to receive file via bluetooth..
wierd..
wierd!..
hey guys just bought a new kensington bluetooth dongle from bestbuy and im trying to hook up my htc hermes to activesync via bluetooth, i followed th online tutorials by setting up the com ports and all but when i go on my hermes to activesync and click on connect by bluetooth it says its not paired to my computer when it perfectly is does anyone know how to help me im runnign a pandora cooked rom
Check this thread out! My Reply at the bottom might help!
http://forum.xda-developers.com/showthread.php?t=347472
Stuart
u r my god ... i hope microsoft burns in hell for not making activesync easy connect with bluetooth
Stuart