I have read all about the bluetooth i need to know to configure the XDAII to work with the comp. Problems i encounter are
1. THey get paired with the auth keys i put in! but the services that i wanna retrieve from the comp on the XDAII itself cannot be view, all i get from Bluetooth>Bonded Devices>Desktop are 1. rename 2. delete. Is it suppose to be that way?
2.Now the vice versa, when i wanna retrieve the services from the XDAII on my comp it gives me only 1 choice, and that is DUN or Dial-Up Networking? and i on the right track?
3. Downloaded the stupid Bluetooth software for the comp and the software cannot seem to detect my XDAII
4.Downloaded the Pocket Bluetooth tools, thinking that it will solve all problems, i am still stuck there!!
I only in my early twenties but i seem bald enough from the stress i get at work, now with this stupid dongle that i bought from Auction it seems to me that i am already bald! Pls some1 just guide me along this... Another other tools or softwares to get???
1 last thing just to let all out there know... I am running on a XP platform with the latest T-mobile 1.72 rom in my XDAII.
From what i understand the XDAII has only a stripped down bluetooth stack. I would like to use a Crabat bluetooth dongle to receive MP3 over bluetooth but this to will have to wait until someone v.clever does a very serious driver package.
From what i think now is the BT stack in XDA 2 is not compitable with the widcom BT stack in my comp! thats the prob any soultions to it? somehow i manage to get it sync but error to the com port saying other programs are using the comp port. Well i getting balder by the seconds! its already 0500 in Singapore!!!
I give up. First when i use the bluetoothGPS i can get an outgoing port to recongize on XP then when i uninstall that, the outgoing port also just dissappear. Can some1 explain to me what is happening? When i download the pocket BT tools. I only get an incoming port from the XDA2 is it suppose to be that way?? Shouldn't i be having a outgoinport to sync too??
FINALLY
I got it to work finally with another bluetooth dogle i bought. An advice to all ppl trying to do bluetooth out there. Always get the class 1 (100m) bluetooth dogle, always a better range!! XDA2 can go out to 30 m. With the new bluetooth stack + bluetooth tools it is good!!! Finally i got it to work with help from http://forum.xda-developers.com/viewtopic.php?t=5237&highlight=active+sync+bluetooth
Related
I have a Sony Vaio which has built in bluetooth. When I pair the XDA2 with it, it can not see any serial profile on the XDA2. Also the BT implementation of Microsoft on the XDA2 does not do much as well. The pairing of the machines from XDA2 gives you the message that it's ready for activesync via bluetooth but that's BS. When you choose activesync via bluetooth from the XDA2, my VAIO shows an instant try of serial connection between the devices but it does not stay there.
The bluetooth implementation on the VAIO is also Microsoft BT stack and it sees the XDA2 as a DUN device, which installs a modem at port 10 to use the XDA2 as a modem. So some part of this works, except the activesync.
Any help would be appreciated.
Also, I have contacted NAVMAN GPS in Europe and they have confirmed that they just sent an XDA2 to New Zealand to their developers to find a solution for the strange pairing problem (NAVMAN GPS only accepts "NAVMAN" as the pairing PIN but you can only enter numbers at the XDA2 pairing software)
I have exactly the same problem as you with my Sony VAIO Z1 SP laptop. I have posted a separate thread but so far no-one has been able to get my bluetooth activesync working. Have you had any luck yet?
No not yet, I've downloaded sony's updates for bluetooth from www.vaio-link.com, but it didn't help the problem. I'll keep on working on this, let me know if you have a solution.
I had a similar problem with a Tosh laptop, but after upgrading to the latest stack was okay. Although I still couldnt configure from the tosh laptop (no serial port recognised), when following the instructions within the bluetooth HOWTO on the o2 website it worked fine
http://www.myxda.com/XdaII/serviceandsupport/template/XdaIIHowToUse.vm
Seems to work okay to other people I've suggested it to as well who were having trouble
kulltogi said:
No not yet, I've downloaded sony's updates for bluetooth from www.vaio-link.com, but it didn't help the problem. I'll keep on working on this, let me know if you have a solution.
Click to expand...
Click to collapse
Uninstall Bluespace NE and use a Widcomm-BT Stack instead. Works fine with my MDA II (Towa Pocket Bluetooth Tools installed) and Sony Vaio PCG-Z1RSP.
You have to edit btwusb.inf before installing the Widcomm-Stack:
[WIDCOMM]
%SONYZ1.DeviceDesc%=BTWUSB, USB\VID_044e&PID_3003 ; SONY VAIO VID&PID
[strings]
SONYZ1.DeviceDesc="Sony VAIO Z1 Bluetooth Device"
How can you download the WidComm stack. Can this stack also be used on a Toshiba Satelite Pro m10. i have troubles with the toshiba bluetooth stack..
mdissel said:
How can you download the WidComm stack. Can this stack also be used on a Toshiba Satelite Pro m10. i have troubles with the toshiba bluetooth stack..
Click to expand...
Click to collapse
Should work if the internal transceiver is also manufactured by Cambridge Silicon Radio (CSR).
For instructions on installing different versions of the WidComm BT-stack,[includig the Dell one] have a look at this forum
http://forum.gsmhosting.com/vbb/forumdisplay.php?f=231
You can also look at this page for a step by step guide (not verified - "never touch a running system"):
http://www.jonscaife.com/
I had problems using activesync via bluetooth with a cheap class 1 dongle (Microtune I think) but managed to get it working by installing the Pocket Bluetooth stuff from the links in other threads (german internet site) and by following the instructions at http://www.jonscaife.com/ and installing the Widcomm stack linked from there (1.4.something I think) rather than the one that came with my dongle (1.3.2.7 I think).
Everything now works a treat - thanks Slartibartfass for the link - saved my hair from being pulled out.
http://bluetooth.i-networx.de/index_e.html
EZ Solution
I just found an easy solution for u guys who using Toshiba Bluetooth Stack ...
U guys no need to remove anything ...
All u need to do is verify the COM port of ur bluetooth ...
1. Go to the “Bluetooth Local COM” Applet in your Control Panel
2.Open “Bluetooth Local COM” applet where you will see a list of Ports
3. The Corerct port you need to use is
“COM7 Toshiba BT Port (COM7) LocalCOM-Server[SerialPort(TOSHIBA LocalCOM)]
and not “COM6 Toshiba BT Port (COM6) LocalCOM-Client”
From this guy here ... << http://thinkabdul.com/2006/10/12/tu...c-via-bluetooth-with-toshiba-bluetooth-stack/ >> TQ sir ...
Then ... u guys need to use ur REGEDIT to find this ...
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Notice there is SerialPort ?? yes ... JUST CHANGE THE string 'Bluetooth' to COM7 ...
After this just pair ur wat ever PDA u've got & thats it ... u got the ACTIVESYNC in the advance option of the services available ...
Hope u guys enjoy !!!
Hello I have a big problem. I bought an bluetooth dongle and i cant connect my QTEK2020 to my pc via bluetooth. I tried to set a lot of settings but i just can not do it.so i need help. If anyone knows the exact settings for qtek2020 and MSIbluetooth dongle . thanx
goran from slovenia
I had a damm similar problem as i could not sync the device via bluetooth.
I have an XDA2 and upgraded my rom to the o2 release from last week. I was hoping that all the serial profile issues would have been resolved in respect to bluetooth gps, but it just made things worse as there are no obvious setting in which i can assign a serial profile to a particular port or even get activesync to work no matter what.
So finally I gave in and downloaded the Bluetooth Tools by Towas again and installed them. Straight away my xda2 was bonding with my gps again and when u add ur pc as a new device (new bonding), under the bluetooth tools u simply select activesync. then u can straight away sync initiated by the xda2 and once a connection is established, u get automatically internet access.
another issue was that my bluetooth software on the pc created too many 'dummy' serial com ports for bluetooth which didnt actually work, so i ended up removing them all under the device manager (windows system- hardware) and then setting up a new bluetooth serial port on my pc (make sure u set up just one).
get the bluetooth tools from:
http://www.bluetooth.i-networx.de
Yeh, 15 serial ports my bluetooth dongle software set up on my pc, whats all that about, greedy or what?
15 :shock: !! Haha..
I only have 1 I think
Rob. 8)
Hi, i'm looking for a way to connect my Nokia 6230 to my Wizard so that the Wizard is recognized by the Nokia as headset. Does anyone know if this is possible?
I've been looking at the widcom/broadcom stack but i couldn't get it to work yet. Insufficient memory error.
Does anyone know if this is somehow possible?
I dont think this works. However I have done the reverse using my Laptop. I used my laptop to take calls and answer them, while my PDA is in the other room! w00t
And do you think it would be possible if we get the broadcom/widcom stack running on the Wizard?
No. I dont think that has the correct services/profiles. And is it possible to get the widcomm stack on the Wizard? Doesn't it already have the microsoft stack on it?
Thanks
how did u answer the calls on your lap top??? thats awesome wanna share? thank you!
my email address is [email protected]
To be a "headset" for another device, you need the "Audio Gateway" profile.
Most desktop adapters support this profile (the Widcom stack does), so your desktop or laptop PC can be a headset for your phone. I've used this as a speakerphone when we were doing something in a class. It's pretty slick.
The Wizard does NOT have the Audio Gateway profile, so it cannot be the speakers or mic for another device.
However, SOME of the Ipaq PDA's can do this. I've done it with a Bluetooth-Equipped Ipaq, so I know that, at least in theory, it IS possible.
TomXP411 thanks. You basically explained it for beckhams777...
PDAs that are not a phone themselves are usually the ones that have this profile. If you find a device that has this profile AND uses the Widcomm stack, I may be able to extract this profile and use it on other devices also. It also depends on what version of widcomm stack they use... But, it could well be possible now that I know some other devices can do it
Thanks
I'll go searching 8)
got it! thanks anyways!
T-mobile MDA (USA version) and Bt
Ok, read all the posts, so there isn't a way to use my bt earbud with music on my MDA?
it worls great for phone, but MDA does NOT have audio gateway software
Al
When I pair with my Mac (OS X 10.4), the mac does discover bluetooth audio as a service on the wizard... however when i try to send sound, OS X states that it could not connect to the BT Audio device... So in theory it should be possible, if the service is discovered. We perhaps just need an app on the wizard that responds to the connection request...
okay so here goes.
i have a S200 (Prophet)
ROM: RUU_Prophet_2151327_22113102_022021_Dopod_PDAMobizEdition_v101
Radio: 1_02.20.21
Protocol: 4.1.13.9
ExtROM: 2.21.13.102
i have been trying to get my Prophet to work with a bluetooth Pan network. The PC is setup to do it but the phone has no support for it or i just cant seem to get it working. can some one plz help to to solve this problem.
Thanks
as far as I know, the prophet does not support the bluetooth pan profile
http://www.clubimate.com/t-DETAILS_JAMIN.aspx
thanks for the info.
so is there no rom for the Prophet that supports the bluetooth pan profile?
or bluetooth driver updates or a another way it can be done it can be done?
i am also having problems using active sync with my bluetooth cant seem to get it right i am still reeding some of the posts here hope fully i can sort this out soon.
It is available in AKU3.2 ROMs and I use it successfully in my car PC.
PDAMobiz_Prophet_WM5AKU3.2_v3231.exe
is this the right one ?
That one and any of the 3.2 ROMs. But note that there are problems with these ROMs including the problem that the phone won't charge over USB (you have to use the main plug-in charger).
Good luck with it.
Tried one and the phone got stuck on the boot Screen just loaded the RUU_Prophet_2090724_20907106_020720_QtekWWE_Ship.exe againe and i will try the other one againe now. Hope i get this sorted out LOL with out making a brick out of my Prophet.
GR8 the update is installed and now lets see what works and what does not work ...
Franscois said:
thanks for your reply on my post. I installed the ROM so far every thing is going well. all except that i cant get the PDA to connect to the PAN service.........
do you have any more information that might help ?
sorry to bother
Click to expand...
Click to collapse
Hi, I checked it again last night. I am using the AKU3.3 now, and this works too. My Bluetooth adaptor is a Belkin USB model and I am using the latest Widcomm 5.xxx.xxx drivers.
I start by using the Internet Sharing program on the Prophet, select Bluetooth PAN, the correct GPRS profile (in my case Orange Internet) and connect. Then I connect the PC using Bluetooth to the Bluetooth LAN on the Prophet.
Hope you can get it to work for you, but it may be also dependent on using a suitable Bluetooth stack in Windows.
The Widcomm drivers don't seem to work with my blue tooth adapter. so i have to use BlueSolei, or the windows drivers. the other thing is i wanted my Prophet to use my home networks internet witch is exactly the opposite of what you did in the above post, what i learned is that your bluetooth drivers must support the hosting side of the connection. The Widcomm drivers do support it but i just cant get them to work with the bluetooth device i have.
it looks like i have to buy a new bluetooth adapter if i want to get it to work....
or see if i can get the Widcomm drivers to work with my adapter.
any other way i can do this ?
Hi. Could someone confirms that Bluesoleil drivers runs ok in S200? Thanks and regards.
i cannot sync via bluetooth......my laptop detects and its paired too...no incoming or outgoing ports are seen....i hve 2 BA both upgraded to WM6... working allright ....please somebody help
Well, you didn't exactly give much information.
What do you mean "no incoming or outgoing ports are seen"? What do you get when you go into activesync on the angel and tell it to connect via bluetooth?
you must have enabled on your PC BT dongle one incoming and one outgoing com port, also in activesync on your pc in connection settings you must check that activesync to accept connection on your incoming port. Then the sync over BT will be possible
bluetooth
thank you explode I have done it now
What settings do I need to fill up?
Hi anyone who can help me,
I am trying to sync via bluetooth... I can connect both laptop and BA .. however, I dont know what else I need to do to make them sync via bluetooth..
I dont understand where to set up the com in and out.
would someone be kind enuf to guide me step by step please .. excluding pairing devices since that is straight forward.
Cheers
Maybe the same here
I have installed WM6 on my N560 and now I cannot send files from my computer to my pda. The pc sais that the pda does not accepts this service.
Any ideea?
Workaroung to service not available
ungureanub said:
I have installed WM6 on my N560 and now I cannot send files from my computer to my pda. The pc sais that the pda does not accepts this service.
Any ideea?
Click to expand...
Click to collapse
I have the same problem, just enable the beam in the connections manager, then enable the bluetooth as well , then set bluetooth to discoverable in the bluetooth settings then everything works fine.
It seems the beam must be enabled as well for some reason.
Would love to know if there is a more elegant solution though.
I can create only incoming port on PC. When I try to create the outcoming port, he try to find the device (BA) but don´t find it. Help....
well like my phone after updating it to wm6 6.1 i cant recieve anything shared on bluetooth, my phone is discoverable but nothing can send into it because it says it fails! can anyone help??
iixxboredumxxii said:
well like my phone after updating it to wm6 6.1 i cant recieve anything shared on bluetooth, my phone is discoverable but nothing can send into it because it says it fails! can anyone help??
Click to expand...
Click to collapse
Me neather... someone can help?
Radio Upgrade
Hi everyone, sorry if I post this in the bad place but I search for the radio upgrade at the wiki and I wanned to upgrade to version 1.13 BUT the link seams to be broken or something. Anyway, I was wondering if any of you can upload this from rapidshare or give me another link because I want to test the improvement. Thanks!