Related
Hi,
I am still having the problem where when sending an SMS or trying to make a phone call, every now and again, my XDA II's ability as a 'phone' gives up, forcing me to soft reset.
I have previously mentioned this before here http://forum.xda-developers.com/viewtopic.php?t=26285&highlight=cloud but no-one was able to help me.
Just to reiterate: This is happening daily at the moment and since my previous post on this subject I have done several hard resets. To describe it in detail, when tapping the 'send' button after creating an SMS the button briefly turns into a cloud and quickly disappears, I then get the bubble saying SMS sent.
Until I come to send an SMS or make a phone call I have no idea that the 'phone' function of my XDA II isn't working. Therefore, there have been instances where people have been trying to contact me for hours and I don't know about it because I have a full signal strength.
PLEASE HELP. Would a rom upgrade work??? Is anyone else having this problem??
thanks :wink:
all i know is that my gut says maybe!
not rom really but more like radiostack change
What should I upgrade to?? Will that just affect how the phone runs (not the pda)
cheers
once again this forum has proved a huge amount of help.... not. There is another post regarding this problem at the top of the board today. Can someone please help as quiet a few people are experiencing this problem.
RE
What OS are you using on your O2 XDA II? WM2003 or WM2003se and what ROM version?
Can you start fresh by doing a hard reset (make sure you backup all important info)
Do NOT install any program at this point in time.
Then try sending SMS or calling from another phone to yours - to see whether the problem exists with the default programs.
If there's no problem and the default programs work fine that would means conflict occurs between those newly installed programs or between the installed programs and the OS/default programs
If there's a problem at this stage its either the default programs/ROM thats partially corrupted or could be likely due to a hardware failure.
Now, you re-flash your ROM to the same version and see if the problem persists. If after re-flashing the same ROM you still face the same problem then its most likely a hrdware issue.
To confirm further, you can upgarde/flash your ROM to a higher version and see if the same problem persists. At this stage if you still see the same problem then you can 100% be sure its the hardware problem. Bring it back to your service center to have it serviced.
NOTE :- UNOFFICIAL UPGRADING OF ROM WILL VOID YOUR SET'S WARRANTY!!!
However, if after upgrading of ROM and the problem disappears then the problem could be due to a partially corrupted earlier ROM
You can now install programs and occassionally test the SMS and phone to check for program conflicts.
Good luck
Thanks for your help mate. It says what OS and Rom i'm using at the bottom of each thread. I really don't think it's a problem with the applications i'm running because I'm only using the IntelliPad as extra software, everything else which is running is default.
Would a different radio version be worth a try??
RE
OK twichibi,
You can try changing to the latest radio v1.18
If things don't work out try to re-flash to the same ROM version again to check whether you have a partially corrupted ROM initially
If problem still persists try reflashiing (upgrade) to a higher ROM version
If all else fails then you can be sure that you do have a defective hardware somewhere
NOTE : - UPGRADE ROM AT YOUR OWN RISK AS IT WOULD VOID YOUR WARRANTY
my imat jasjar with the latest rom (1.13.53) and latest radio(1.04.02) sometimes freezes 10 times a day, forcing me to soft reset (sometimes 3 or 4 times in a row) before it works again...i have tried everything from upgrading the rom, hardressetting, changing memorycards, leaving the device on instead of automaticly turning of....nothing works..
the worst is when i stop using it and put it on charge during the night, it does not wake up in the morning...i have to softreset everytime and all calls and sms that came in during that time where not received...can anybody relate to this problem, or am i alone in this....i really like the device, but missing my calls and resetting ten times a day, makes me wonder if i should go back to my trusted magician...maybe a rom from another device (o2,mda,qtek) would be a solution ?
any help is welcome
I'd get it replaced as it shouldn't be doing that. I've not had a single hang on my XDA Exec since I got it nearly a month ago.
Ant
Anton.Valleyman said:
I'd get it replaced as it shouldn't be doing that. I've not had a single hang on my XDA Exec since I got it nearly a month ago.
Ant
Click to expand...
Click to collapse
do you really think it is a hardware problem....i find it more to be a software problem...and i would not like to be without my device for 1,2,3 or even more weeks...anybody know if the qtek 9000 rom is available somewhere...having had a qtek 2020,9090 and s100 and also tried a few mda's and imate's, i find these to be the best roms in general
@jesax, I had a JJ and I used all the features (inc. video calling and UMTS downloads) but only had a freeze with SMS notifications and downloading emails over UMTS. You device could have a hardware problem. The other possibility is the ROM is corrupted so you should try to download a new copy.
mine randomly hangs when using Agile Messenger. Stable the rest of the time.
Planning a hard reset shortly, will see if this fixes it.
in my case a hard reset does not change anything...i have done three and have changed to the latest rom...no dice
does anybody know where i can find the original jasjar rom or a good working english rom to try out or do a downgrade...
i am reaching in the dark here....
@jesax, did you download a fresh ROM from clubimate? Your original ROM could be corrupted
jah said:
@jesax, did you download a fresh ROM from clubimate? Your original ROM could be corrupted
Click to expand...
Click to collapse
yes, i downloaded the latest rom from the imate site...no go...still the same problems...i first tought it was a charging problem, as it happens every morning when i take it from the charger....i now left the jasjar untouched for a few hours in closed position without the charger, and when i opened it up, it froze again, leading to a softreset.....HEEEEELLLP
@Jesax,
If I were you, I would have falshed the ROM again to my device as I think there is some kind of corruption to your installed ROM.
To get the latest ROM version go to this site :
ftp://ftp.xda-developers.com/Universal/
If it does not open, just go to this site and you can open it from there:
http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
You can get it also from this site:
http://www.clubimate.com/t-DEVICE_JASJAR_UPD.aspx
But your device must be registered to axcess to this site.
Flash the ROM to your device and try to use it without up-grading the radio version to 1.04.02..... if you experience the same problem so it's definately a hardware problem and in this case you have to give it back, but I think it will work properly "I hope".
If you don't experience the same problem again, it might be either a problem with the radio version or a problem with any of the softwares installed on your device.
By the way, can we know which softwares are installed on your device at the time being??
Please let me know the result.
Regards,
jesax, okay. So you have downloaded the new ROM at least twice now from the clubimate site therefore we can assume the ROM is okay. Also please confirm that you are not using any third-party apps. Are you using a 3G or standard GMS SIM. Try turning off the radio functions (Fn+->) and see if the freezing stops.
Jesax,
Are you using spb pocket plus or any similar software??
khaledelfeki said:
@Jesax,
By the way, can we know which softwares are installed on your device at the time being??
Please let me know the result.
Regards,
Click to expand...
Click to collapse
thanx, i give it a try but am getting fed up with spending hours behind the computer resetting this thing...
the software i am running are :
resco file explorer
gpspocketmagic
launcher
tomtom 5.1 installed, working but like to freez up also when in use
tweaks2k2
that's about it
i do not use 3g but do use gprs...it was switched to "always on" with the reg hack, but i turned it back (you never know)
i will have a try when i com home this evening to turn of radio function, and charge it overnight (how do i do this, without taking out the sim )
on the wiki ftp site i see there is a 02 xda exec rom i can dowload.
can anyone recommebd this ?
should i give it a try instead of the jasjar rom, and will it install as easily as the jasjar, or will it ask for id's and codes?
thanx guys
@ Jesax,
Before flashing the ROM again to your device just un-install tomtom 5.1 and pocketmajic and see the result "you can use majic button instead" .... if it does the same, you will have no option but flashing.
Don't get fed up...... your problem will be solved, the Jasjar is a wonderful device and you will enjoy it once your problem is solved.
Regards,
should i give it a try instead of the jasjar rom, and will it install as easily as the jasjar, or will it ask for id's and codes?
thanx guys[/quote]
I wouldn't advise you to do that.
There is nothing wrong with the jasjar ROM.... and it's the most popular.
Regards,
jesax, as I said in my previous post, you can switch off the radio using the following keys on your JJ "Fn" + "->" and select the All Off option.
Also remove all third-party apps and see if stability improves. If it does add one app at a time back to see which one is causing the stability issue.
The XDA ROM only requires a code for the Coroprate option (code is 0506), the Corporate option is the best to choose at it has no O2 additions.
khaledelfeki said:
@ Jesax,
Before flashing the ROM again to your device just un-install tomtom 5.1 and pocketmajic and see the result "you can use majic button instead" .... if it does the same, you will have no option but flashing.
Don't get fed up...... your problem will be solved, the Jasjar is a wonderful device and you will enjoy it once your problem is solved.
Regards,
Click to expand...
Click to collapse
thanx...i don't think tomtom5.1 is the problem, as i was having this problem before the install of tomtom...pocketmagic i can't remember when i put it on (so many resets, so many....)
i will give it a go
what's annoying is that it does not happen on steady intervals...it can freeze up twice in a minute, and then work fine for ten hours.
jah said:
.
The XDA ROM only requires a code for the Coroprate option (code is 0506), the Corporate option is the best to choose at it has no O2 additions.
Click to expand...
Click to collapse
would you recommend me trying it, or is the jasjar rom actually better...i don't want to spend another few hours flashing the o2 rom, if it is no use
another question...maybe related...
i have noticed that when i open up my jasjar from fully closed to "laptop" mode, the backlight does not come on everytime...sometimes it does, sometimes i have to push the "on button" to light up...
my backlight is set to go out on batterypower after 30 seconds, and to stay on with external power.
the powersettings are : turn off after 1 minute on battery power and stay on with external power
@ jesax,
Most probably your ROM is corrupted.... in this case a hard reset will not work, but a fresh flashing to the ROM will be the best solution.
Regards,
Hello all,
last week I got my new HTC Magician, here in Austria so called "T-Mobile MDA Compact". Unfortunately I have the problem, that my device freezes from time to time (at least 1 time a day). This happens most of the time when using the T-Mobile IntelliDialer, but sometimes it happens even when I do not use the device at all.
When the problem occurs, I am not able to make or receive a call, the upper status LED is gone as well (no signal, no blinking).
When I got the device I had ROM 1.13 installed, but after I heard that maybe this could cause the problems, I installed version 1.12 from T-Mobile site, but still have the same problems.
Now I am really out of ideas, don't know what to do. It seems I am not the only one with this problem, so I am afraid it hase no sense to switch the device with a new one @ a T-Mobile shop. Or do you guys have a "good", normal running Magician w/o this bug?
Thanks in advance for your help!
Greetings, Matthias
Helle again,
As you've got the same problems on rom 1.12 & 1.13 and you got it just for a week I'd say go back and get another one. There are people with simular issues and I guess there are much more users without it, like myself.
So my advice use your warrenty, make a backup of your contacts etc. first with sprite (trial version is available) or AS or whatever, saves you a lot of times. I won't restore the apps just reinstall, maybe it is some combination of a faulty program & with a backup you get that back as well. And it gives you the chance to determine, if possible, what's causing the freeze.
Good luck, M
ok, then thanks again
Today I made a ROM update @ T-Mobile. If that did not the trick (I will look for errors the next days), then I will use my warranty and change the device itself. I hope they don't send it to technical support somewhere, but give me another one instead...
Greetings and thanks for your infos, Matthias
haimat said:
Hello all,
last week I got my new HTC Magician, here in Austria so called "T-Mobile MDA Compact". Unfortunately I have the problem, that my device freezes from time to time (at least 1 time a day). This happens most of the time when using the T-Mobile IntelliDialer, but sometimes it happens even when I do not use the device at all.
When the problem occurs, I am not able to make or receive a call, the upper status LED is gone as well (no signal, no blinking).
When I got the device I had ROM 1.13 installed, but after I heard that maybe this could cause the problems, I installed version 1.12 from T-Mobile site, but still have the same problems.
Now I am really out of ideas, don't know what to do. It seems I am not the only one with this problem, so I am afraid it hase no sense to switch the device with a new one @ a T-Mobile shop. Or do you guys have a "good", normal running Magician w/o this bug?
Thanks in advance for your help!
Greetings, Matthias
Click to expand...
Click to collapse
Hi,
I have been using my Magician for almost 8-9 months .. moving from ROM version 1.11 to 1.13 WWE BigStorage (radio 1.11 to 1.13 as well).Recently (last 1mth or so) I start to notice that I have a strange problem similiar to you, my 'radio' would 'hang' where I cannot receive or make calls, can't even receive or send SMS. However, my signal (the top bar signal strengh) will still work. This is really fustrating .. because the PDA still works, I won't know when my Magician 'hangs' ... (at least until I try to send SMS or make a call).
I've downgraded to Radio 1.11 & ROM 1.11 ... I'm still facing this problem, but not as often (sometime once in 2 days). The strange thing is that my wife who is using a Magician as well, is facing the same problem (symptom arrise almost the same time together). Both our phone used to be fine.
So far, no luck trying to locate the source of the problem, and I don't think both our magician's hardware got screwed at the same time ... I have a feeling, it has something to do with GPRS ... gut feel ... but cannot confirm.
Anyone face this problem and managed to solve it, I would appreciate any pointers ... Many thanks!
Note : I don't install additional ROM software such as CallerID, etc ... I only use intellidialer.
Hello, you could be right with your GPRS feeling, I have it as well...
Is the LED of your device blinking, when you have one of these freezes?
Hi guys,
Don't know if this gets you on the right track, but a few months ago I had major memory problems with my magician. Thought it was a virus, probably was one or two today plug-ins that consumed all of my memory very rapidly. Think of plug-ins like OO journalbar. Didn't look at the led blinking I just soft-reseted to solved the prob. for a few minutes. Very inconvenience when you're navigating in a car.
Since I ditched these plug-ins eveything is fine, tried them afterwards of course & noticed the memory leaks.
When you're not using anything like those apps. it must be something else. Maybe there's something on the forum.
Cheers, M
I thought about some apps or plugins as problem source too, so I refreshed my device without installing any additional app to it -- no success. So I still have these hangups, even if I have no tool installed...
Sounds like really s..tty problem.
Does the use of gprs or phone functionalities make any difference? what happens when you skip the ext-rom installation (hard-reset & soft-reset just before the customization kicks in) & go for basic WM2003, without all the TMO apps&branding?
M
... tried this allready, but without any difference, device freezes serveral times a day. I would say it's a hardware fault, can't think of another problem source.
Yesterday I spoke with a T-Mobile tech @ T-Mobile support. He told me, he is not aware of this problem and he always had "good" devices. And he updated my ROM to latest version...
Since I still have the problem, I will change my device now and see if this makes any difference!
haimat,
I think exchanging your magician is the best option, the techi might be right in saying he only encountered good ones. Haven't found much error reports like yours, so the rest must be good (look at the bright side). Hope you can trade it directly without any hassle & enjoy your magician for the rest of it's lifetime.
Found some people with a universal with simular probs. didn't read all posts though there were so many. So can't tell you how it ended, it's about a JasJas that hangs and hangs and ...
In the meantime good luck with the change of your device.
Cheers, M
I have the 8525 with WM6 installed. About 1 in 40 times, the End Call option doesn't display that the call ended (on my side). I attempt to still talk to the other person but I can't hear them, though. After about 2 minutes later, it finally ends the connection. I must do a soft reset to temporarily fix it; the only drawback is that the most previous call isn't shown as being made.
About 1 in 80 times, the call attempts to be made, but doesn't connect at all. I try to End Call, but it seems to "freeze" the screen. The "Close screen" seems to help, as in 30 seconds the device finally quits trying to connect.
Another thing I noticed, after the phone freezes, the antenna signal drops to zero and then returns to about 2 - 3 bars of signal, about 5 seconds later. I'm not sure if that is the cause of the phone hanging, or not. Is there any kind of software to resolve this issue? It's really annoying! Thanks for any help!
is that a cooked rom or official? what's your radio version and carrier?
I'm thinking u need a different radio verson...(u must have hardspl to flash another radio version)...
I got the 8525 as a reconditioned from AT&T about 3 weeks ago. It came with WM5, and I had the above calling issues back then too. I then was informed on the boards here to upgrade to WM6, which I downloaded from HTC, via the AT&T website link.
As for programs, I removed the AT&T "bloatware" via the hard reset trick. Later, I installed S2U2, HTC Streaming Media, HTweakC2.1b, and the PTTFix software. One other program on the 8525 is OCN8 -- for my iBlue 737 Bluetooth GPS device. There are no other files that I can recall, except maps, songs, internet .jpgs, and (camera) pictures/videos.
Settings:
ROM Version: 3.62.502.3
ROM Date: 10/11/07
Radio Version: 1.54.07.00
Protocol Version: 32.86u.7020.23H
I do appreciate and try to understand all of the replies that I receive, and I do try to respond within a timely manner. I understand that people are busy and may have other careers as well. However, the thing that makes me pull my hair out is when someone starts to assist my problem, then just ditches the thread after my reply, without so much as an "I'm sorry, but I'm not able to solve your problem" at the minimum! Normally, I give a 48 hour window for the helper or any more helpers to reply before I get frustrated, but it's been way past that timeframe now!
I've noticed that phenomenon on 3 of my prior posts, each are on different subjects. It seems that after the first reply, no one but the original helper responds! If that original helper is busy, or just forgets about the thread, then I'm screwed over.
Sorry to rant, but I tried looking all over the boards for the best Radio program. All I seem to find is best ROMs, but not really Radios. I've seen 2 other Radio programs in signatures, but I'm not sure what one would be best for my purposes. I've seen mention of 1.47.30 & 1.47.00.10 in some members' signatures, but I'm hesitant to just "trial and error" one, for fear it would damage my device. I currently have the WM6 default 1.54.07.00 version, but it freezes up on making some calls and more often on ending a current call.
Anyone else for ideas or opinions on what Radio program to use? Please back up your opinion with facts when possible. I am not an expert on the device, just a new user who is afraid to ruin my investment.
Much thanks to all who read this post and reply to it!
Hi, just saw your thread & did not know U were still hanging....
I would try radio 1.48.00.00 first, then 1.47.00.10 or 1.50.00.00 if necessary. Seem's a lot of at&t users liked 1.48 from what I noticed (don't forget hardspl - use mrvanx guide in the Mobile 6 forum section)...
Here's the 1.54 thread with pro's, con's, and 1.48 at&t comments...
http://forum.xda-developers.com/showthread.php?t=334697&highlight=radio+1.48
galaxys said:
I would try radio 1.48.00.00 first, then 1.47.00.10 or 1.50.00.00 if necessary. Seem's a lot of at&t users liked 1.48 from what I noticed (don't forget hardspl - use mrvanx guide in the Mobile 6 forum section)...
Here's the 1.54 thread with pro's, con's, and 1.48 at&t comments...
http://forum.xda-developers.com/showthread.php?t=334697&highlight=radio+1.48
Click to expand...
Click to collapse
Thanks for the reply! I will do the hardspl first, then try to install the 1.48.00.00 Radio. I'll report back with details in a day or two.
My current Image Version is 3.62.502.3, and I am attempting to update it to 3.54.255.3.
I keep having errors while trying to install Radio Version 1.48.00.10 to my 8525, after opening RUU_Inside.exe on my laptop. I've even tried to install it from my microSD card, but I get the tri-color screen instead of the white background with text screen, shown in the online example. The 8525 ActiveSyncs to the computer fine, and the screen shows:
"Updating the ROM image on your PDA phone ...
Please do not remove the USB connection from the PDA Phone or launch any program during the update process.
Remember the operation will take about 10 minutes."
As soon as the above grey box pops up, ActiveSync drops after that box appears, then I get the following message:
"Error [260]: CONNECTION"
I've installed Hard-SPL v.7 onto the 8525 already. Not that it seems to make a difference, I believe, but other programs that are on it include: WMXL 8525 Keyboard Fix, S2U2 1.16, Resco Explorer 2008, PTTFix, MunduRadio, & HTweakC 2.1,
not sure, but did a "search" for error 260 & seems to be your pc usb port:
(use xda google search for any questions)
http://forum.xda-developers.com/showthread.php?t=368624
btw, u are using XP & not Vista on u'r pc.
My laptop has XP (Media Center Edition). I did a search as well, but it was dated back to 2007; I wondered if there was a newer fix than the one on that page, as it referenced the prior version of Hard-SPL. From the sounds of it, I have to install WM5 again, change the radio version (which was the only thing I need to adjust, as the voice calls have been a pain since day one), then reinstall all of my programs again.
I've heard people create ROMs. However, the radio settings can't be included in them . . . or am I off-base with that presumption? I am not that experienced to cook my own ROM, as I am still learning the nuances.
Well I broke down and went on AT&T's online chat. Sounds like there is no software to install to fix the issue. I hoped the radio version switch would help, but I couldn't get it to install! I guess it's back to the Replacement Depot on Sunday. I should return my device to WM5, which I hope to find the thread for on the board.
If interested, here's the key parts of the conversation:
Me: Hi, my 8525 is giving me trouble making and ending calls. It sometimes hangs, and doesn't quit trying to place the call. Once I reset it, it's fine until I try to end the call, it hangs up the call, but not showing so on my side
AT&T: Can you try hard shocking the phone for me please? A hard shock is taking the battery out while the phone is still powered on, and then power the phone back on once the battery is back in the phone.
Me: I received it as a reconditioned from the AT&T depot in Pittsburgh, PA. About 20 minutes later, it did the same thing, so I upgraded to WM6 and still the same issues
AT&T: If you continue to have these issues with this phone, you will need to take the phone back to the Device Support place where you got it from.
Me: Is that a common issue?
AT&T: Sometimes it is with at reconditioned phone.
. . .
AT&T does not have an update for the Windows Mobile 6 at this time. However you may check out HTC website at www.htcamerica.net/support/default.html and see if they have an update for this software for this phone.
Me: So it's the phone, not the software?
AT&T: Yes that is correct. There is a defect within the phone that is causing these issues. If you continue to have these issues with this phone, you will need to take the phone back to the Device Support place where you got it from.
Me: Are you able to explain what causes it that the Device Center doesn't catch it
AT&T: I am not sure what causes this issue.
Me: Like should there be anything done to prevent that from happening?
AT&T: It is hard to tell with reconditioned phones. It may be something that can be fixed and it may not. If the hard shock does not fix this issue and the Device Support cannot, then you will be given another phone.
ohpfan said:
My laptop has XP (Media Center Edition).
I've heard people create ROMs. However, the radio settings can't be included in them . . . or am I off-base with that presumption? I am not that experienced to cook my own ROM, as I am still learning the nuances.
Click to expand...
Click to collapse
Ok, your signature is looking good and that is some conversation with good old at&t...bla bla bla
To answer your question above, the chefs cooked roms do not include radio (because everyone around the world uses a different one). But, the Official WM6 rom's do (posted wiki & wm 6 section). So, why don't u flash the official wm6 since u have hardspl now? This in itself may resolve u'r issue (if u don't get the driver pc 260 error)! why would u want to flash wm5?
I was going to return my 8525 to the Service Depot where I got it, is why I mentioned returning it back to WM5 status. However, I wanted to see if it could be fixed by software first, but considering the above online AT&T chat, I am definitely going to get it replaced again. So, I want the 8525 to not show my "3rd party software" to ruin the warranty. I had the 8525 to individually remove the CABs under Remove Programs, and then I did a Clear Memory to default for good measure. Hopefully the Service Depot won't say anything about the device being altered that way.
Oh yea, I am going to get it replaced on Thursday. I will try to get them to give me a new one, not a reconditioned. That is, if there are even any new ones around anymore! It'd be a miracle if they gave me a new 8925 Tilt instead . . . lol I know -- keep dreaming! Wish me luck with a new 8525 though!
Well, I exchanged my current 8525 for another reconditioned one. The repair guy actually asked if I heard of the xda website (for help with my device!), lol!! He didn't go into detail about what this site does, just asked if I heard about it, and I affirmed that I did. Possibly he found traces of programs that changed settings, but he didn't rat me out. He sounded like he was confident that he fixed the phone dialing issues, but gave me a new one "just in case".
As soon as he gave it to me, it booted right up, without the calibration screen. He flat out told me to calibrate it, but it didn't appear. I was trying to see if it would act up with the dialing again, but noticed it didn't save the numbers on my SIM! I then decided to get rid of the bloatware via the Clear Programs and that lead to the calibration screen, finally.
So far it seems to work fine! I made about 6 calls this time and they seem to end properly. There is a slight 30 second or so delay when I press the button with the "red phone symbol" [end call] before the screen lights up again though. Is that normal?
Oh, I've only loaded up S2u2 so far. I will reinsert the others onto my memory card today sometime before work.
Again, so far so good! Only real issue I see is that the ringer volume is very low when the device is in the carrying case I have it in. I will search on here for a ringer volume changer, soon!
Glad U were able to get another phone!
"red phone symbol" [end call] before the screen lights up again though. Is that normal?
No, should end in a few seconds...doesn't seem it's even assigned to the phone (U can use Schaps Advanced Config tool to do this and many more good tweeks).
galaxys said:
No, should end in a few seconds...doesn't seem it's even assigned to the phone (U can use Schaps Advanced Config tool to do this and many more good tweeks).
Click to expand...
Click to collapse
The "end call" does it's job, just that the screen is dim then it takes like 30 seconds to brighten again to show that the call is ended. Possibly it's something I have set up wrong. I notice the blue backlight for the keypad doesn't light up until a minute of my typing on it for a text; it's like a delayed reaction.
(I have the unlimited text/pix/vid plan, as of this past Thursday.) A bit off-topic, but are the Yahoo, AOL, & MSN IM programs considered a text or do they use kilobytes of data? I could use the programs over the Wi-Fi if I had to, but I don't want to pay extra for data kilobytes.
Lastly, I have never downloaded the Schaps Configuration. What all settings should I change? I know it's mostly based on personal preference, but what are some common alterations using it? For instance, I set the alarm to wake up to, but it's only a short beep sound. If I really was sleepy, I would probably sleep right through it! Does this program (or any others) configure any song on my device to be the alarm? I've already done that to the ringtone (where the first 30 seconds of any song is my ringtone).
ohpfan said:
The "end call" does it's job, just that the screen is dim then it takes like 30 seconds to brighten again to show that the call is ended. Possibly it's something I have set up wrong. I notice the blue backlight for the keypad doesn't light up until a minute of my typing on it for a text; it's like a delayed reaction. check in Settings>System>Backlight & Keyboard Backlight.
(I have the unlimited text/pix/vid plan, as of this past Thursday.) A bit off-topic, but are the Yahoo, AOL, & MSN IM programs considered a text or do they use kilobytes of data? I could use the programs over the Wi-Fi if I had to, but I don't want to pay extra for data kilobytes. I don't use them, but it should be treated as MMS text.
Lastly, I have never downloaded the Schaps Configuration. What all settings should I change? I know it's mostly based on personal preference, but what are some common alterations using it? For instance, I set the alarm to wake up to, but it's only a short beep sound. If I really was sleepy, I would probably sleep right through it! Does this program (or any others) configure any song on my device to be the alarm? I've already done that to the ringtone (where the first 30 seconds of any song is my ringtone).
Schaps has a number of Performance, Power, UI settings, etc., but no alarm ringtones. U may not need Since u'r using HTweekC.
Click to expand...
Click to collapse
see info above...
Been having some problems with my HD2 as of late. If this is the wrong forum to post, please point me elsewhere.
Purchased original one via Mobicity - turned out it was a HK version. I dropped it and smashed the screen, so got a replacement one (purchased thru Mobicity again) under my insurance.
Not sure the origins of the second fone though. When it arrived, it was in Italian. Had to send it back to M/City to reflash it with (what I believe to be ) a WWE version.
Details on startup screen:
R 2.00.51.07
G 15.30.50.07U
D 1.66.76641
Have left the phone as-is after it was reflashed with an English ROM and returned to me. Has worked perfectly for about 8 months. Recent issues only occurring last 2 months or so.
Issues having lately:
* Randomly reboots itself - completely randomly. Sometimes, while not even touching the phone, sometimes while typing a text or browsing the net.
* Battery usage lately has been horrendous. Hard to pin an exact figure on it, but it's MUCH MUCH worse than usual, over the last 2 months.
* CONSTANTLY dropping signal & Data connection. I can watch the data/signal symbols switch from nothing, to G, to 3G, to H, and back again within the space of seconds. On occasions, when the data-conn drops out (but fone signal remains), I go into connection settings and find the Data Settings slider is switched off! I must manually go and turn it on again... which sometimes works, and sometimes fails to stay on.
I HAVE manually gone into the settings and told it to update to the latest data settings from my provider (Optus) and it always responds that I already have the latest settings.
Often, the only way to get data connection back is to manually reboot the whole fone.
Sometimes, while browsing a simple website on the fone, it will drop connection. I live in Brisbane. Optus advises Brisbane has absolute FULL coverage, until you start going outskirts. I can be in the city centre gardens (no big buildings to block signals) and still not achieve full "H" or even "3G" speeds... most times only achieving simple "G" speeds.
This is obviously not right I HAVE contacted Optus about this, and they suggest it is an issue with the phone, as they insist they have full coverage brisbane-wide.
I have also noticed, in the last 2-weeks or so, that Cookies Home Tab is not working correctly all the time.
On occasions - but not ALL the time - on my home-page CHT displays appointments that are already passed days or even weeks ago.
Sometimes, when adding a new appointment (either manually in the fone, or via the MyPhone website and synching), it will not display at all in CHT.
I know there is a new version of CHT, but some of the technical info on the website sounds like there can be issues with not correctly un- or re- installing it.
I've still got a couple of months left for my manufacturer warranty.... I'm not keen on reflashing with un-official ROMS until after that period has elapsed... then i'm keen to go for it. If that is my only option, then I will consider, but would prefer a "genuine" fix first.
Can anyone please offer some suggestions, hints, experiences ? I haven't been on the forums for months, and now the HD2 thread is some 10-episodes of 30+ pages, so I have no hope in hell of reading thru all that hoping to find an answer.
Suggestions please for possible reasons, or fixes, or a different WWE English ROM to flash to ?
Note also: My serial number does not appear to be Asian in origin. I have tried to d/l the Asia Pacific, the Worldwide, and the HK latest ROMS... but it fails upon serial number. I have not tried, but I assume my fone is Italian model, hence any ROM that I flash must be d/loadable from another source, not the HTC website.
Please also note: I'm not - at this point - interested in running Android, so (without wanting to sound ungrateful) if any help could avoid suggestions of that nature please.
Thanx in advance for any assistance.
spinifex74 said:
Been having some problems with my HD2 as of late. If this is the wrong forum to post, please point me elsewhere.
Purchased original one via Mobicity - turned out it was a HK version. I dropped it and smashed the screen, so got a replacement one (purchased thru Mobicity again) under my insurance.
Not sure the origins of the second fone though. When it arrived, it was in Italian. Had to send it back to M/City to reflash it with (what I believe to be ) a WWE version.
Details on startup screen:
R 2.00.51.07
G 15.30.50.07U
D 1.66.76641
Have left the phone as-is after it was reflashed with an English ROM and returned to me. Has worked perfectly for about 8 months. Recent issues only occurring last 2 months or so.
Issues having lately:
* Randomly reboots itself - completely randomly. Sometimes, while not even touching the phone, sometimes while typing a text or browsing the net.
* Battery usage lately has been horrendous. Hard to pin an exact figure on it, but it's MUCH MUCH worse than usual, over the last 2 months.
* CONSTANTLY dropping signal & Data connection. I can watch the data/signal symbols switch from nothing, to G, to 3G, to H, and back again within the space of seconds. On occasions, when the data-conn drops out (but fone signal remains), I go into connection settings and find the Data Settings slider is switched off! I must manually go and turn it on again... which sometimes works, and sometimes fails to stay on.
I HAVE manually gone into the settings and told it to update to the latest data settings from my provider (Optus) and it always responds that I already have the latest settings.
Often, the only way to get data connection back is to manually reboot the whole fone.
Sometimes, while browsing a simple website on the fone, it will drop connection. I live in Brisbane. Optus advises Brisbane has absolute FULL coverage, until you start going outskirts. I can be in the city centre gardens (no big buildings to block signals) and still not achieve full "H" or even "3G" speeds... most times only achieving simple "G" speeds.
This is obviously not right I HAVE contacted Optus about this, and they suggest it is an issue with the phone, as they insist they have full coverage brisbane-wide.
I have also noticed, in the last 2-weeks or so, that Cookies Home Tab is not working correctly all the time.
On occasions - but not ALL the time - on my home-page CHT displays appointments that are already passed days or even weeks ago.
Sometimes, when adding a new appointment (either manually in the fone, or via the MyPhone website and synching), it will not display at all in CHT.
I know there is a new version of CHT, but some of the technical info on the website sounds like there can be issues with not correctly un- or re- installing it.
I've still got a couple of months left for my manufacturer warranty.... I'm not keen on reflashing with un-official ROMS until after that period has elapsed... then i'm keen to go for it. If that is my only option, then I will consider, but would prefer a "genuine" fix first.
Can anyone please offer some suggestions, hints, experiences ? I haven't been on the forums for months, and now the HD2 thread is some 10-episodes of 30+ pages, so I have no hope in hell of reading thru all that hoping to find an answer.
Suggestions please for possible reasons, or fixes, or a different WWE English ROM to flash to ?
Note also: My serial number does not appear to be Asian in origin. I have tried to d/l the Asia Pacific, the Worldwide, and the HK latest ROMS... but it fails upon serial number. I have not tried, but I assume my fone is Italian model, hence any ROM that I flash must be d/loadable from another source, not the HTC website.
Please also note: I'm not - at this point - interested in running Android, so (without wanting to sound ungrateful) if any help could avoid suggestions of that nature please.
Thanx in advance for any assistance.
Click to expand...
Click to collapse
Hi, I to have an HD2 in Oz from Mobicity - though never got an Italian version. To be honest, the only time I had an issues like those you are talking about was when I flashed new roms WITHOUT 'Task 29' first. Look it up. It kind of "cleans up" your phone inbetween cooked roms. But as you have only had Official roms on your phone, this might not be the issue.
To be honest, I don't think you Task 29 anyway until you put HSPL on your phone (this allows you to put cooked Roms on), but as soon as you do this, you void your warranty. Now you can take HSPL off before you send it back, but if your phone was to die BEFORE you took it off and then you sent it back, you'd be ****ed if they managed to power it up.
As you're under warranty, I'd send it back to be fixed and explain the fact that they had another rom on when you first got it.
Ra-ey
ps. You may want to quickly check online to make sure you are running the most uptodate Rom for your phone on the HTC website.
Hi,
Did u try hard-reseting your phone by pressing the volume up and down and the power button at the same time. Usually fixes many issues relating to yours. It might have been caused by a programs problem which corrupted main system files.
Luckych
Thanx guys for responses.
luckych said:
Hi, Did u try hard-reseting your phone......
Click to expand...
Click to collapse
Not yet, no..... will go through that process tonight. Was just worried that hard-setting it MAY end up back with the Italian settings (on the off-chance it still has an Italian ROM, but has just been set to display in English) ???
Can anyone identify the ROM details in my original post, as being WWE (I assume this means World Wide English?)
I cannot find anywhere that lists if those numbers mean WWE or English ?
Further to this... i just found this thread here: http://forum.xda-developers.com/showthread.php?t=791436
This is almost exactly what my phone is doing too, so I suspect it may be the same cause.
One thing I forgot to mention in my original post here, is that sometimes, after the fone reboots itself, it fails to boot up again and all the handset buttons fail to respond. The little red reset button does not work either.
Doesn't happen EVERY time, but occasionally, the only way to resurrect the phone is to remove the battery for 30 mins or so, then reinstall and try again.
Obviously a very real issue - and it seems a known one - perhaps time to return for warranty fix or replacement.
Thanx all for responses in this thread - I will monitor the other thread now for further news.
when you hard-reset it reverts it back to the last rom you had, if it was WWE then it would reload that.
Remember when someone load's another rom on your phone it complete (kinda) erases the old rom and replaces it so there would be nothing that would revert it to the italy ROM.
R 2.00.51.07 (Radio Version)
G 15.30.50.07U (Protocol version)
D 1.66.76641 (ROM Version) could be anything
Usually the Italy ROM only has one language in the rom so my guess would be it has the WWE, by looking at the numbers above no-one would be able to tell you what you what rom it is.
Hope this helps
luckych said:
when you hard-reset it reverts it back to the last rom you had, if it was WWE then it would reload that.
Remember when someone load's another rom on your phone it complete (kinda) erases the old rom and replaces it so there would be nothing that would revert it to the italy ROM.
R 2.00.51.07 (Radio Version)
G 15.30.50.07U (Protocol version)
D 1.66.76641 (ROM Version) could be anything
Usually the Italy ROM only has one language in the rom so my guess would be it has the WWE, by looking at the numbers above no-one would be able to tell you what you what rom it is.
Hope this helps
Click to expand...
Click to collapse
Thankyou mate.... that makes it a lot clearer
Will try the hard-reset method tonite and-reinstall only the apps (if it ok to use that term, for WM programs !!!) that I need.
Have also been given a link to the latest WWE ROM to flash, from Mobicity, so will hard-reset, to clear any crap, then re-flash with the new ROM.
Just curious... I know I should remove the memory card when resetting/reflashing (i'm not doing dual-boot with Android), but should I also remove the SIM card too? Eg: Get the background system installed and running, then power-off, insert SIM, power-on to get the network specifics up and running ???
My Guess
I have a Telstra HD2, running the latest Telstra ROM and CHT 1.8.5. The phone reboots regularly of its own accord. Seems to be related to overheating as the base of the phone is quite hot when it reboots. If the phone get really hot, it will not re-start (stays at white screen). Have had to put the phone in the fridge to get it to work.
I don't know if this is related but I have a cradle that I use to connect my HD2 to my work PC. If the HD2 is running SenseUI, after the HD2 was been in the cradle for a while, the HD2 re-starts. This does not happen if I disable SenseUI. It seems that the restart only occurs after the battery reaches 100%.
The restarting occurs with CHT 2.0 beta as well.
When I get a chance, I'll do a hard reset and see if that fixes the problem.
Cheers
Hmmmm....... seems to be a recurring issue with some of the "newer" phones. My original phone - before I dropped it and smashed the screen - never had any of the issues I'm currently experiencing
I've read somewhere on here that the rebooting issue is suspected to be from early-production snapdragon processors..... which SHOULD be an immediate warranty claim, in my opinion.
I will try the hard-reset, and then a fresh Official ROM install, to see if it solves it.