My XDA o2 has error when use two button contact and calendar (it don't work) . I try use boot-loader but can't use action button(it also don't work). Can i repair it ? If can do, how do i do ?
Please help me. Thank
Have you tried a hard reset by pushing once in the hole bottom right of xda then wait one minute and push again? Did this happen suddenly or over a period of time, was it dropped or contaminated with fluid?
Yes. i have hard reset many times but nothing change. Help me !!!
Related
Can't figure it out but I have put a new Radio and a new ROM on the Himalaya or XDA II and still the power buton at the top resets the phone instead of turning it off!!!
The soft reset doesn't do anything!! the power button doesn't even reset properly cause it does a soft reset but also i lose my date and time etc but no information!!?!?
The only thing I have tried it puting a new Bootloader on cause no matter how many places I go to look at how I do it noone explains it well enough for me to risk it!!
Help please someone.... Is it a hardwear issue?!!?
hi guys, this might seem to be posted a lot of times but i havent found anyone who experienced the same problem as me. ive flashed a custom rom (not found in xda dev) and the phone went well for 3 weeks to a month.however, today(lunchtime) i had a problem i soft reset my device and i was stuck at the 2nd splashed screen. i dont think my hermes is bricked because i can do anything a normal hermes do before. (pda function, calls, sms) really no problem at all until today. ive done what the wiki said like
Problem 2: stuck on windows mobile screen
Try to soft reset with stylus and wait 5 minutes on the windows mobile screen to see if OS boots
If all you get is same windows mobile screen, remove the battery for some time (about 20 min should be enough) and put it again.
Again, if all you get is same windows mobile screen do a hard reset.
If doesn't solve the problem do a hard reset, but do not press spacebar to reboot after. Instead, do a soft reset with stylus when the device asks you to press spacebar.
Check if you might have the NO GSM Problem
well i cant go pass the 2nd splash screen so what i did was hard reset it. and problems gone. my concern is ive lost a lot of documents because of what happened. so i just wanna ask you guys what could be the problem and the solution to prevent this from happening again.
much respect to all here!
TIA
What do you do just before the problem occur?
best thing to do is hard reset you phone this will reinstall you OS and resolve the problem. You need to old the 2 top soft key and press the reset but with your stylus. This will then bring then take u into the hard reset mode. follow the prompts on ur screen by using your keyboard .
This will work as i have experienced the same problem
kind regards
Ash
Did u happen to
a) disable the bottom tray
or
b) set PIE cache to storage card?
Both tend to cause this, tho not in every case.
hi guys
Did u happen to
a) disable the bottom tray
or
b) set PIE cache to storage card?
Both tend to cause this, tho not in every case.
ive done both of this in my ppc. hehehe
@sir mikechannon
yeah that was my badd. havent done bckup and all. hehehe
@sir ghz
hmmm nuthin, just the usual... havent installed anything prior to the problem.
well guys... thanx for the comments my ppc doing good now, i just hope it wont happen again. hehehe. much respect!
Hi,
I've managed to kill my Orbit 2! Everytime it starts up it gets as far as the Windows Mobile splash screen then shows the volumn control (both levels turned down) but goes no further. The power button still turns the screen on and off and the screen still dims after a while with any key bringing it back to full brightness, but nothing happens!
Has anyone else had this problem?
Also, I've looked in the forums, but can't find details anywhere of how to hard reset this phone! The only instructions I've found relate to non-existent buttons!
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
Can anyone shed any light on why this is happening or how to hard reset!
Thanks in advance,
Nick
it is the bottom two buttons (below the answer & hang up) and the stylus for a soft reset.
When it asks for a confirmation hit the green answer button
Hope this helps
Thanks NC35 - that did the trick!
Luckily I backed it up on Sunday so shouldn't have lost too much!
Thanks
Having tried ( now three times with no help ever) to speak to O2 and ask how to hard reset following the start menu completely failing..... I was told it was "impossible" you will need to return it and use the "28 day" repair service.....
I have at last managed to restore - thanks to this posting!!
No comes the reseting process - which is a bit of a bore!!
O2 seem to have dispensed with any actual tech support at all!!
Dave
The procedure of performing hard reset is perfectly explained in the manual that comes with the phone. "hard reset" is included in the index of this manual, so it takes only a couple of minutes to find out what you have to do.
After all, RTFM ;-)
bizon said:
The procedure of performing hard reset is perfectly explained in the manual that comes with the phone. "hard reset" is included in the index of this manual, so it takes only a couple of minutes to find out what you have to do.
After all, RTFM ;-)
Click to expand...
Click to collapse
Now, thats not very hepful is it, especially when you're away on business for a few weeks and don't happen to carry the manual with you everywhere you go...
nid
i killed my o2 xda orbit II as well, but unable to hard reset
sorry guys. I vae the same porblem as nick666 with my xda orbit II. however, hard reset failed!! the window splash screen came back after I hit the green button & it becomes static. I am really worried now. I have done so many paperworks with that xda..anybody please help!!
honeyyati said:
sorry guys. I vae the same porblem as nick666 with my xda orbit II. however, hard reset failed!! the window splash screen came back after I hit the green button & it becomes static. I am really worried now. I have done so many paperworks with that xda..anybody please help!!
Click to expand...
Click to collapse
calm down. read this: http://forum.xda-developers.com/showthread.php?t=381600
most likely flashing another rom will fix your problem
I have downloaded the hard-spl. I'm completely stuck. I can't connect my pda to activesync. activesync didn't detect my pda. by the way, when I reset the pda, screen that asked to press SEND for restore to factory setting turn up few minutes after resetting. press green button, screen automatically shows windows mobile startup screen. I'm still stress, |I'm sorry but I can't helped it..
sorry guys. I have read the instruction wrongly. now it works fine.
many thanks cr1960 who has kindly response to my silly worries
thnaks again.
honeyyati said:
sorry guys. I have read the instruction wrongly. now it works fine.
many thanks cr1960 who has kindly response to my silly worries
thnaks again.
Click to expand...
Click to collapse
NP. Glad you got your problem sorted
Hi and hope someone could help and calm me down.
I have an original free Polaris with 6.0, and upgraded with the 6.1 rom from the HTC site. Everything was working fine until today that I soft-reseted.
It boots OK but when it shows the password screen, it doesn't allow me to put it. I touch all the screen and nothing happens, the soft options (unlock and Menu) don't respond either.
Last thing I did about 3 days ago was to install Advconfig 3.3 but I don't think this could damage the phone.
I'm not even able to sincronized because ActiveSync tells me to unlock it first.
I'm really getting mad and I'm desperate !!!!
Thanks in advance for anyone who can help ...
the first thing to do is an hard reset.
try it and tell us what happeans
OK, and many thanks in advance for your fast feedback !!!!!
hard reseting . . .
I'm sorry, nothing happened. Just the same symtomps. I hard reseted pressing the explorer and gps button, while presing the soft-reset with the stylus. It seems that the problem is that when I type, the screen doesn't respond, as if the problem where the presure with the stylus.
Continue desperated ...
Bad Hard-reset. I just misunderstood that I had to keep stylus pressed until tha message appeared. Now I'm back again.
One of the worst hours of my life.
Thanks very much for your suggestions, finally it worked.
Best regards.
ok nice
Hi all
first post and i got an interesting problem with my phone which i qualify as stupid. It all started when when my virtually keyborad started becoming unresponsive and when i tried to do a factory reset, i could not enter the 1234 number to start it. i left the phone for a while and then i could not get into the setting even . But i could receive calls but i could not call since i could not access any numbers on the dial pad( by pressing on the numbers of coruse but from dial log screen i could)
Anyway long story short while fiddling with the phone , i thought the lock feature was on that is why some of the touch functions was not totally responsive but to my sadness, i activated the lock and now the phone is stuck on the front page and i cannot access anything since i must press unlock at the far corner of the down screen but stupidly, while pressing on the unlock, since it is unresponsive, i cannot unlock the phone to get to the normal menu and so on.The only thing working is the square pad which tells me to press cancel then unlock to free the phone for normal use
By the way the lock feature is the one that blocks the phone so that you do not accidentally press on the touch screen and activate a program and not the lock thing operators put to limit your phone
I want to know if anyone can help me unlock the screen so that i can reset the phone or alternatively any other method via usb to reset my phone to factory settings. Any special buttons on the phone i can do to do that?
I tired leaving battery out for 24 hours but that did not work to unfreeze the touch buttons
Was thinking to reload the windows mobile completely via the micro card (which i read here) but i am not sure it will work or i fear it might brick my phone
Any suggestions will be welcome please.... thanks
Use myMobiler to control device from Pc through usb
Good luck
Ps: you'll probably have to change digitiser afterwards
Well tried the mobiler but the thing is that it asks the phone to allow the program to conenct and i cannot press yes on the touch screen since it is frozen or something so i am stuck again.
Very strange, it doesn't ask anything on my device...
Why don't you hard reset: press green and red buttons and while pressing, poke the stylus shortly in the reset hole then release the 2 buttons. It will ask something that you probably won't see, just press the action button and wait for it to restart.
Don't flash another on just yet - it may well cause issues as it sounds like your digitizer is broken. Don't hard reset either
Does it pick up anything at all? Have you tried tapping all over the place in that region to try and get a response, sometimes just under the screen also works. Do you use a screen protector? If not, try it with one, if yes, try it without, it may be interferring with it, or it may help the touch be picked up by the phone (Stupid, I know, but this is something I found to work before with my elfs, and omnias)
When it is locked, is activesync picking the phone up? You may be able to put the remote.exe into the windows folder (for myMobilier) and do it that way.
A digitizer costs about £6-£10. But due to the age of this device, as sad as it is, I would suggest trying a new phone out if funds allow for it.
ok so far i tried the hard reset (red button and green and pressed the on off button but nothing. When i press on off button alone it switches off but not hard reset. I did not know i had a reset hole at the bottom of the phone.I did that with red and green button but nothing. Only when i poke the hole alone it does a hard reset i think but when i switches back on it is still unresponsive and locked screen
I tried poking under screen protector nothing. Also i think screen is still responsive because when i tap on it, the screen lights brighter
I tired putting remote exe file on the phone( active sync is working and i can read files on the phone) but i have two remote files..which one to use ? the one that ends with 40 one or 50 .Also where to put it specifically..which folder.I tried my windows mobile based device but nothing.Also tried program files and data application nothing.
Mobiler cannot connect since from pc alone because it asks my phone permission
and i cannot tap yes to accept program.
so any more suggestions please
Hi
Maybe I wasn't clear enough, here's the exact procedure, it should work since you have to use only hardware buttons:
Hold down send/reject buttons (green/red at the front) and reset with the stylus; release the stylus but keep holding the buttons till you get 'this will erase all your personal data' message, then press 'action' (big front button) to hard reset.
If Hard reset doesn't work then your device hardware is faulty.
If he hard resets he will liekly not be able to align the screen on initial setup tito12.
Avanisha. If you try to run one of the remote.exe it will say this is not a valid windows application, thats the one that needs to go into windows on your phone.
captainstu72 said:
If he hard resets he will liekly not be able to align the screen on initial setup tito12.
Click to expand...
Click to collapse
Hi captainstu72, i was under the impression that he messed up something in his system so a hard reset would hopefully solve the problem. In case he still can't align the screen after HR then he has to replace the digitiser. Mymobiler will not solve anything, pls read the 1st post: he wanted to do a factory reset. He just have to sync before HR.
thks tito 12..problem was solved with your help.J ust did not get the steps of hard reset right. Phone is working ok now and screen is ok as well as tap function. thank god i don't need a digitizer. thanks to captainstu72 for the help as well .You were right tito..seems i ran a program and then all hell broke on my phone. I wanted to factory reset but as you know the pad was locked.
Glad I could help, enjoy your device
Ahh okay, guess i mis read something! Sorry
Glad its all sorted though, I was just concerned he may end up in an annoying align screen loop