Can't figure it out but I have put a new Radio and a new ROM on the Himalaya or XDA II and still the power buton at the top resets the phone instead of turning it off!!!
The soft reset doesn't do anything!! the power button doesn't even reset properly cause it does a soft reset but also i lose my date and time etc but no information!!?!?
The only thing I have tried it puting a new Bootloader on cause no matter how many places I go to look at how I do it noone explains it well enough for me to risk it!!
Help please someone.... Is it a hardwear issue?!!?
Related
I was having lockups for about 3 weeks already, the only thing that would fix the problem is after i Hard Reset the device, but now even Hard Reset won't turn the phone on? please, i need a phone and my phone won't even hard reset and start...Thanks!
Try to flush a new ROM.
Hi guys, been reading the forums for some time now but my first post since i think i've briked my device lol, today i decided to give the omapclock a go, and found a clock speed of 240mhz (read other threads saying it was fine, and i also made sure it was functioning right.. then decided to register the speed using the updated version....
then when i reset my wizard it just hangs on the wm5 screen, the radio rom seems to load as i can hear it via the speakers on my pc... question is, is it recoverable?? its not been modded i.e its got the factory rom on it and radio, and i can get into bootloader mode okay with USB support... can i interface with it somehow, might be a good hance to try wm6, however i think its briked and not holind much hope..
can someone please advise?
s/unbrickable/debrickable/
have you tried hard reset?
yes tried holding down the power button, pulling out the battery etc
doesn't sound like hard reset to me, try holding the comm&voice_dialing buttons while "poking" the reset hole
says booting in safe mode but still hangs
by comms and dialling button do you mean the green answer phone?
thank you so much the hard reset worked, was quite awkward figuring out how to hard reset lol
no problem, now you can go back to breaking stuff
yup going to try an upgrade to wm6 now, wish me luck!
hi guys, this might seem to be posted a lot of times but i havent found anyone who experienced the same problem as me. ive flashed a custom rom (not found in xda dev) and the phone went well for 3 weeks to a month.however, today(lunchtime) i had a problem i soft reset my device and i was stuck at the 2nd splashed screen. i dont think my hermes is bricked because i can do anything a normal hermes do before. (pda function, calls, sms) really no problem at all until today. ive done what the wiki said like
Problem 2: stuck on windows mobile screen
Try to soft reset with stylus and wait 5 minutes on the windows mobile screen to see if OS boots
If all you get is same windows mobile screen, remove the battery for some time (about 20 min should be enough) and put it again.
Again, if all you get is same windows mobile screen do a hard reset.
If doesn't solve the problem do a hard reset, but do not press spacebar to reboot after. Instead, do a soft reset with stylus when the device asks you to press spacebar.
Check if you might have the NO GSM Problem
well i cant go pass the 2nd splash screen so what i did was hard reset it. and problems gone. my concern is ive lost a lot of documents because of what happened. so i just wanna ask you guys what could be the problem and the solution to prevent this from happening again.
much respect to all here!
TIA
What do you do just before the problem occur?
best thing to do is hard reset you phone this will reinstall you OS and resolve the problem. You need to old the 2 top soft key and press the reset but with your stylus. This will then bring then take u into the hard reset mode. follow the prompts on ur screen by using your keyboard .
This will work as i have experienced the same problem
kind regards
Ash
Did u happen to
a) disable the bottom tray
or
b) set PIE cache to storage card?
Both tend to cause this, tho not in every case.
hi guys
Did u happen to
a) disable the bottom tray
or
b) set PIE cache to storage card?
Both tend to cause this, tho not in every case.
ive done both of this in my ppc. hehehe
@sir mikechannon
yeah that was my badd. havent done bckup and all. hehehe
@sir ghz
hmmm nuthin, just the usual... havent installed anything prior to the problem.
well guys... thanx for the comments my ppc doing good now, i just hope it wont happen again. hehehe. much respect!
I have Imate K-jam G4
and while i was trying to flash it with the new WM6 i make mistake by the steps so I get Error and then my phone won't work anymore no lights and no power no charge .
I try to get the phone to the flash mode by hold the camera button and press the soft rest, it didnt work and the phone still off
i try to hard reset the phone by holding the communication button and the voice command button and click the reset button while iam holding and it didnt work.
i remove the battery for a while and get it back in and even this didnt make it alive,
this phone is special for me and i wont lose it, so i hope anybody could help me and i would be completely thank full for every advice
Its a G4,did you get it HardSPL or you were upgrading through SoftSPL,which rom were you trying to flash ?
Sounds all to familiar! Time for a new motherboard probably.
trying to be more optimistic than rmcknight....before searching for a new motherboard check your battery if it's completly dried out....try to charge it thrrough another phone if that doesn't work either check the "Dead wizard? NEVER! Let's revive!" thread here in the forum if you are a skilled technician...if not...it's time to search for a new motherboard....
I was using my Universal today, when out of the blue the device goes blank. It does not power on, it shows no signs of life. I can access the bootloader and hard-reset menu, but thats it. Also when i access those menus, i dont need to press the reset button. Could this have something to do with stuck reset switch, or is my Universal dead? Peculiar thing is, this unit was only used for 3 days, i bought it new from leftover stock sale and now this. I havent even flashed anything to it.
laukaus said:
I was using my Universal today, when out of the blue the device goes blank. It does not power on, it shows no signs of life. I can access the bootloader and hard-reset menu, but thats it. Also when i access those menus, i dont need to press the reset button. Could this have something to do with stuck reset switch, or is my Universal dead? Peculiar thing is, this unit was only used for 3 days, i bought it new from leftover stock sale and now this. I havent even flashed anything to it.
Click to expand...
Click to collapse
Welcome to the forum
Try to do a hard reset:
http://wiki.xda-developers.com/index.php?pagename=Universal_Resets
Maybe reflashing a fresh ROM can help, try Tomal great ROM´s on Universal Mobile section
Reading the Wiki also helps a lot!:
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Good luck and dont forget to vote!