Hi,
I have T mobile Pocket PC phone. It doesnot work with ATT. I am new to this kind of technology. How can I make it work pl guide me.
My model details are
ROM version : 3.08.10 ENG
ROM Date : 07/11/02
Radio Version : 6.02
Protocol Version 324e4
I do not see these version on this site to select from. I am not sure how should I unlock it with xdaUnlock.exe. If I try to run this exe it says error: could not retrieve unlock code.
Pl help me. Thanks!
try the kitchen at www.yorch.net and cook 3.17 ROM. it should unlock your device with the start up
How to cook up the RAM
Thanks for your prompt reply.
I am very new to this. So can you please explain me how to cook up the RAM to 3.17 as u suggested. Is there any risk running that? Pl send me the details steps I need to run for this excercise so that I do not mess up the things.
Thanks again.
Related
Hi folks just found out about the forum and the advice and information is excellent. I was wondering if anyone can help. I recently purchased a 2nd hand XDA. It appears to be locked to the O2 network and was wanting to use your software to unlock. I downloaded the XDAUNLOCK.exe and executed this as per instructions. But keep getting the message ‘Error getting unlock code’ can you please tell me if you have any other programs that will perform this for me. My details are as follows:
Rom version 3.12.07 ENG
Rom date 08/13/02
Radio version 4.06
Protocol vers 32554
Can anyone help…….thanks John.
You have 2 possibilites to unlock your xda....
1.) Use the XDA-Manipulator and a serial cable
2.) Upgrade your Rom to version 3.17 and use the xdaunlock.exe program
HTH
Stefan
Also, you can try the XDAunlock.exe alone without upgrade. It worked for me but I had 3.18 at that time.
Good luck ...
Thanks Stefen, sorry for sounding stupid but how do I upgrade my ROM to 3.17? Is there something I can download, buy etc ? I already tried the XDAunlock.exe as stated on my original mail but keep getting error message ?
Any help appreciated.
You can down load it from
http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe
http://www.xs4all.nl/~jsummers/XDA/XDA-developers-SER-v12.exe
Use your XDA connected to the PC through the cradle and follow the instructions.
Good luck ...
Hello, im new so greetings to all on this forum
I want to unlock my xda and i dont have that serial cable, only USB.
This is info :
ROM-Version : 3.02.00 GER
ROM-Datum : 05/27/02
Radio-Version : 4.01
Protokoll-Version : 324e2
Its locked on O2, i have only his USB cable and please if anyone has some direct links to unlock software and instructions for unlocking to post them here.
Thany You all in advance, i need it soon as possible !
Greetings from Croatia
Busha said:
ROM-Version : 3.02.00 GER
ROM-Datum : 05/27/02
Radio-Version : 4.01
Protokoll-Version : 324e2
Click to expand...
Click to collapse
Hehe, seems to be any very old ROM version (Maybe one of the firsts.)
Easiest way is to upgrade to the xda-developers specialedition rom 1.2. It's based on the english 3.17.03 ROM and icludes an tool called xdaunlock. With this tool you can unlock your device. Afterwards you can stay at this rom version or cook your own rom, that you want to use...
Disadvantage is, that you will loose all your data on your device. But there is no other possibility....
HTH
Stefan
PS: If you want to go back to your old rom, you have to create a copy of the ROM
Tnx a lot, i dont need anything that is on him so its a great solution, i hope that it works with USB cable... im going to look for that on this page, right ??
Tnx once more
Hi!
I have MDA PW10A1 and i need to unlock it, but i dont know how I can do it. I'm green in this thread, please help me.
Version ROM 3.18.10 ESP
Date : 08/15/03
Radio:3.24.00
Protocol version: 32S54
Thx and regards
go to
http://wiki.xda-developers.com/
and look at
XDAunlock and xda2unlock and xdadev_all_unlock, remove the SIMlock from your XDA 1,2,3 and mini.
First i want to say i don´t know very much about pda devices.
Hi, i tried to upload XDA special rom and update failed, now i can enter in Wallaby bootloader (5.22) and says gsm ok. Is pw10a1
My question is how to make it work again. Before upgrade, i made a backup in sd card, but don´t know how to restore...
Off course, pda can´t connect with activesync.
Now i want to know how to restore ROM with spanish lang.
Thanks in advance
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Stefan
I just bought a new qtek9100,and it has a french rom.
ROM version: 2.17.7.6 FRE
Rom Date: 2/21/06
Radio version: 02.07.10
protocal version: 413.1.03
ExtROM version: 2.17.7.108
Everytime i try to update the rom with ENGLISH ROM,i get ERROR(300)INVALID UPDATE TOOL .
Is it something i doing wrong?
I have already try this 3 ROMS:RUU_Prodigy_2170702_21707102_20710_QTEK_WWE_Ship.exe
:T-Mobile_RUU_Wizard_2241010_224_22511_ENG_US.exe
:RUU_wizard_2241001_22410101_TMobile_WWE_PDAMobizEdition_v120
you need to unlock CID FIRST....to be able to install any rom.
here is how to...
http://forum.xda-developers.com/viewtopic.php?t=47848&postdays=0&postorder=asc&start=0
You mean i use this ROM: ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
To unlocked CID and then i try using any order Rom to flash my qtek 9100
No pal,
You use LokiWiz (on this forum) to unlock CID and THEN you can flash Roms of another brand (like Qtek, or T-Mobile).
Good luck,
Molski.
p.s. I am not sure if 2.17 Roms can be CID unlocked already (for free, there is a paid solution).
Can u send me the lokiwiz and how to to used it.THANKS
as was before stated.. how about read the link he gave you
http://forum.xda-developers.com/viewtopic.php?t=47848&postdays=0&postorder=asc&start=0
within that link you will see:
now download the (lokiwiz02b) from here;
http://forum.xda-developers.com/viewtopic.php?t=33796
read the link you'll be more informed, empower yourself
i downloaded lokiwiz02b and i run likiwiz.bat, my qtek 9100 rebooted .
but still can run any order ROM.
dmoney94 said:
i downloaded lokiwiz02b and i run likiwiz.bat, my qtek 9100 rebooted .
but still can run any order ROM.
Click to expand...
Click to collapse
u have to downgrade as in the link i posted above then run lokiwiz .02, read my son.....read
Do i have to pay to get unlock first.
Still need help.what should i do.
hi dmoney, I'm having the same problem that you are. Lokiwiz just doesn't seem to CID unlock new 9100's, I get the same error [300] message that you do. Hopefully somebody will crack it soon, otherwise we're stuck with the roms that we have.
There is a newer version of lokiwiz then 0.2b...you need to get the latest version.
hi,
i am in indonesia using o2 xda with PPC2002:
rom version : 3.14.17 ENG
rom date : 10/11/02
radio version : 4.17
protocol version : 32S54
model no : PW10A1
i need a suggestion, while i plan to upgrade my xda using wm2003, which best rom version can running well in my xda?
which one is best between wm2003final and ppc2002 with rom version 3.20.06?
i have already dload rom version 3.20.06 rom kitchen with .exe file...
can someone explain to me the step by step upgrading rom with .exe file?
thanks a lot to all of u...
yesss
i've already upgrade with wm2003 4.02.04 ENG standard.
now i try to upgrade with wm2003 4.02.04 ENG with rom kitchen.
but, (
all my backup in my sd card cannot be read with this new rom..
i'd try to downgrade my rom with ppc2002 3.20.06, but it cannot be downgraded..
it always shown " cannot read rom "
pls anyone, can u help me???
update info...
this radio version installed is 4.17.00
but, the signal is quite poor, only 1-2bar...and it cannot connect GPRS...
before i upgrade the rom, the signal is very good...and it was easy to connect GPRS...
any suggestion, pls???
i try to downgrade using rom version 30.02.06
but it shown : "cannot find the ROM image to upgrade your Pocket PC. Pls dload n try again"...and in command prompt, it shown : "nbf directory not found in c:/.../..."
help pleaseeeee....
i am stuck with it....
Try doawnloading it once again. There was an error in the File.
Or extract the EXE-File manually with winzip, and copy the nbf file out of the direcotry German into the directory English.......
Than just run the start.bat file....
Stefan
thanks lumpistefan,
but it doesn't work.
i run start.bat file, but nothing happen.
well, i let my xda run this os wm2003
thanks god i've already made "permanent save" before,
so i didn't loose my contact...
now the problem is the poor signal this xda have...
how to tune up this poor signal?
btw, after upgrade, my xda had a change in model number, it used to have PW10A1, but after upgrade, it become PW10B1. Did that model number change is one of the factors that make the signal poor?
pls your suggestion and review of this case...
thanks a lot!!...
HAPPY NEW YEAR 2009....
one more question,
this wm2003 doesn't have wireless modem aplication,
can i install this aplication? where did i get this aplication?
i try to googling, but, so far, i can't get this software...
thanks...
ROM 4.02.04 + bootloader v5.17= armagedon
i have installed my XDA with new rom in www.romkithen.de... yeah, tmobile rom i think... many bug in this rom!!!
so i want to downgrade to my original rom... but... IT CAN'T BOY!!!!
what the hell happened??!!! i can't flash via activesync (.exe) and....
I CAN'T FLASH VIA SD CARD!!! yes, bootloader v5.17.. i have open many thread, i have install wallaby patch tool with XDA RIT 1.0 (1,3 Mb)...
futhermore... when i wrote patch tool(.nb2) with xdarit, it says no removable disk in my computer, i have plug in my sdcard to my computer(Notebook)... and when i have wrote it and restart my notebook..... I have lost my WINDOWS XP and all data in my harddisk... no found OS in my device,
is it damn ROM or what?!!!!
please help me???
[email protected]