Related
Hi there,
I have tried to upgrade the radio stack on my XDA. This seems to have fried the machine so it will no longer get past the inital load screen.
I have a spare XDA that I want to try and get the Radio Stack ROM image off of (onto SD) and boot the broken XDA with this SD in and get it ot reload the radio stack.
Firstly is this possible?
Secondly, when I go to the bootloader on the working XDA and select GSM -> SD it tells me to insert serial cable and run PC Monitor. Now I have a serial cable but I have no software called PC Monitor. Anyone know where I get this and how it works.
I have seen various articles about Radio Roms but most seem to refer to the 1% problem, which I dont have.
Can anyone help please? I need some clear concise instructions on how to go from here
Many thanks
Keith
no known way to get the RSU on SD through boot loader options ... you better send your device to repair
I recently have been given a 2nd hand Atom Pure, but when i insert any valid simcard, the atom won't get a signal.
I don't know if locked or unlocked, but I didn't get any warning like " Invalid Simcard " or something else, the atom just can't get any signal ( tried 3 different simcard from 3 different operator )
Anyone have any idea to repair it ? maybe reflash the Radio part ?
I have simmiliar problem with old Qtek smartphone which can't get off the "Flight Mode", tried reflash it didnot work, sent it to warranty and come back healthy ( the seal did not even teared, so maybe it can be done via software ?? )
I can't send it to warranty, cause my friend give it to me from out of country, and I even didn't know that my atom still in warranty period or not.
Please help, It would be a waste if I can't get the GSM part work again
BTW, the ROM 20060426B1WWE.
Thank you
did you tried to reflash ROM?
No, not yet.
I'll try it, as soon as I finish downloading, I'll post the result
Thank you
I download :Xda-Atom-ENG-20060426-MOT0822_1.exe
Flashed the ROM, another problem appear !!
Upgrading Image Rom .......... Succeed
Upgrading BootLoader........... Succeed
Upgrading Ext Rom............... Succeed
Upgrading Radio Stack........... Succeed
Burn Radio Stack.................. Connection Error
Now I stuck at Utility Update screen ???!!
Tried to flash it second time, still got the error
Any idea to fix this ????
Please Help. Thank you
try to flash the older rom
tried to reflash it again, with another PC new active sync 4.2, still the same problem.
Tried to download official rom update fromm seeo2.com, it says there's no update rom for my atom (based on IMEI number, already preloded with the latest ROM), so I can't find the link to download.
@kropotov
Thank you so much for helping me in short notice, If you don't mind would you please give me the link to the older ROM ?? Can't find it here in forum.
Thank you
Try this:
Xda-Atom-ENG-20060105.exe
http://www.rapidshare.ru/91168
@kropotov
Thank you !!, I'll post the result !!!
Just reflashed again with official rom (Xda-Atom-ENG-20060426.exe), "Connection Error" Again ! (tried on three different PC)
Is there another way beside reflashing the ROM ?
Thank you
Xda-Atom-ENG-20060105.exe the result is the same ! tried on 3 different pc.
Is there any way that I can update it via Mini SD card ?
Any other way ?? please help
I thing the problem - the radio stack is locked by operator.... Try to serch for "unlock radio stack"
see here
http://forum.xda-developers.com/showthread.php?t=266758&highlight=unlock+radio
I've read above link you gave me, but it seem all the tools must be used in healthy state or at least can enter in to bootloader mode. while mine can't do anything, stuck in update utility screen (tried all button combination known to man)
I found a way to enter in bootloader mode, but when enter bootloader with mini sd inserted (dummy) it says "Start downloading". what I'm asking which way downloading proccess ?? atom to SD or SD to Atom ?
I found WM5 tool for dumping rom, it not specified for certain device. If I enable to dump healthy image rom to SD (from another and the same version rom of Atom), Is there any way that I can flash it to broken atom without in boot loader mode ??
I will keep reading above link you give me, I will be waiting your next suggestion and help.
Thank you so much.
http://forum.xda-developers.com/showthread.php?t=276664
the problem is I can't get into bootloder mode, always stuck in Upgrade Utility????. tried all button combination though
thank's
Found a way, use rec + camera + reset button.
In DM mode choose Exit DM, and my Ayom live again !!!!!!
BUT, Can't find any GSM in Wireless Setting, WTF !!!!!!
Tried to reflash it again
Thanks
reflash it in normal mode, result GSM gone. reflash it second time in bootloader mode, result good, GSM setting come back, but still can't find any signal ?!
Do I get GSM hardware error ?? or something ??
Thank you
there's a Selftest app. in the programs group, should use it to see what result will return after a GSM module test.
Already did, Self test in program menu and in Diagnostic menu. All result OK.
Just can get signal, I can't make Emergency call either.
Opened the Atom, Antena ok, all seems normal.
anymore. :--(
Yesterday i^ve make a setup for the ext_rom but with a wrong update. It was been not for the Artemis..my fault.
Now i see only th et-mobile start screen and no more.
What can i do? Thanks in advance..
hmm, please flash your p3300 whith the original software with hope that it will be alive again. otherwise you can take an hardreset on your phone but i'm sure that there will not happened.
is your PDA an original fom HTC or from any other Provider?
it`s from t-mobile
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
dr.moppi said:
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
Click to expand...
Click to collapse
hello there!. i have the same problem, did you manage to get a usb connection? i can't flash it...
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
arvind09 said:
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
Click to expand...
Click to collapse
Please tell me how can i get the t-mobile stock rom or can you give me the link, thanks
Shipped ROM's in English - http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
To get into bootloader - hold down the record/voice command button (top left along the side of the phone) and use the stylus to press the recessed reset button on the lower left side of the phone (same side as the other boutton you hold down) Keep holding the record button as you hit and release the reset button, you will eventually see a screen with color bars on it. At this point you will be able to get a USB connection, but not an active sync. Try to start the ROM file when the phone is in this state and connected to your computer.
What is the original language/carrier for your phone?
MDA Compact III stops in T-mobile logo screen
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Hi I have the same problem. I have the B&B3.7 and get stuck in the splash screen. I could enter to the bootloader mode and use some commands of the mtty.
I have my old rom, how may i load it to the pda? I have a SD and a tytn to load something in it.
Thanks!
Hernan
ftsv said:
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Click to expand...
Click to collapse
run uspl first!!! you can then run installation from any provider of your choice.
http://forum.xda-developers.com/showthread.php?t=311403
USPL cannot be run if your phone is stuck into bootloader?
It starts counting, askts to copy the same information again several times, and get stuck at 50... how is this possible, anyone has the original HTC Dutch rom ? May be the WM5 also! Thanks!
same problem but with no display
i have done the same mistake
have tried to upgrade my T-MOBILE MDA COMPACT III(aka htc p3300) with the HTC TOUCH ROM
it started to upgrade and an error occured
then i have lost the display and all
when i connect it to my laptop using USB i hear a beep in my computer but active syn didnt find any device
i dont know what to do now..please help me it has to be recovered
there must be some way pls pls anyone help me to get my working phone back
will appreciate your concern
thanks
Regards
Faraz Feroz
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
y_bother said:
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
Click to expand...
Click to collapse
thanks Y_Brother
i have downloaded the new rom but it doesnt seem to work too
i posted this in another thread but no one replied so thought this one mite be more busy.
i am new to all this and i stupidly went running into things and tryed to ROM upgrade my t-mobile MDA Vario II (HERM300), not knowing i had to CID unlock first, it has broke! when i boot it up i can not get passed the t-mobile splash screen and it also flashes "no-gsm". i have read many suggestions on fixing this but i have had no luck. i can get into the boot screen however and get the red green and blue stripes.
i have IPL 1.01 and SPL 1.04.
it will allow me to connect to my PC with USB but active-sync does not recognize i have connected the phone.
please help someone. i just need a way i can get this thing working again. if i could just get the phone into a state of use again that would be good.
please help, at least let me know if Ive got a chance of repairing it
i believe if you can get it in to bootloader mode you can flash back to original rom and start over
i thought that to but when i tryed the t-mobile rom it said "connection error" and also said it should be connected through active sync. but then agen it mite of been the wrong t-mobile rom but im sure it was for the vario ii. do you have a link to the one i should try please?
i downloaded the official UK shiping rom from t-mobile site and upgrading now through bootloader. will report on what happens.....
nope, keep getting "device not responding" or "connection error". any other sugestions?
i looked on here http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick and it says that i have to "Flash any type2 radio in NBF format. If that doesn’t work, flash the radio using HERMflasher" please could someone tell me how to do this, if this is the solution to my problem or if there is another way around this. thanks.
please help someone i realy need to fix my phone
Cool down....
what's ur radio version?
Also have u read this? http://wiki.xda-developers.com/index.php?pagename=Hermes_SimUnlock - TRY THIS FIRST, before attempting anything else...
ok, i have tryed that "sim and cid unlocker" and i beleve that you have to connect with active-sync because when i tryed it when i was in boot loader it said that it was not connected but it was. i will get my radio version now.
EDIT: my radio version is: 0107
EDIT2: also, here are some other numbers (which i dont know what they mean but mite be needed) which apear on boot-up t-mobile splash screen, in red letters/numers, just before "no-gsm" flashes on:
M 05
S 04
B 06
D 1.21
If you can get into the Bootloader (Rainbow Screen) you should be okay (Not a Brick)
Go download a Radio Rom from the wiki.
Enter Bootloader first, then connect to PC. Then flash the Radio Rom.
Edit, Also Read: http://forum.xda -developers.com /showthread.php?t=296722
berdinkerdickle said:
If you can get into the Bootloader (Rainbow Screen) you should be okay (Not a Brick)
Go download a Radio Rom from the wiki.
Enter Bootloader first, then connect to PC. Then flash the Radio Rom.
Edit, Also Read: http://forum.xda -developers.com /showthread.php?t=296722
Click to expand...
Click to collapse
ok, ill try that, does it need to be a perticular radio because im not super CID? for some reason the link will not work.
oooooo, it seems to be workin!!!!!!!!! im at...16%. ill report what happens after update finished
yes!!! it worked!! thank you very very much for your help!!!
Hi all,
I encounter some problems with the polaris. When I want to use the camera I encounter the message:" unable to initialize....".
I also encounter problems with the FM radio: when I want to use my radio, it starts up, you see the screen, but no sound radio stations can be found. This means no radio functionality as well.
I've perfomed soft reboots but also hard reboots (so it initializes completely again). I also tried new ROMs. Nothing helps. Anybody recognizes this problem? Looks like that it has problems initializing the radio/ camera function.
Is there an update available which could fix this problem? My device is not damaged at all. Or would there be an other solution, as far as you know? Furthermore, the phone works perfectly. Hopefully you can help me with this.
Thanks!!!
Greetz,
M
First flash ur pda with :
http://www.4shared.com/file/46948092/9e97bc37/Radio_Murata_1582123.html
or
http://www.4shared.com/file/54732373/c9f753c5/Radio_Murata_1582514.html
If that doesnt work.Keep the one murata radio on your pda and flash another win mobile rom(without radio rom).
I prefer khanx vanilla v6 (radio isnt working, http://forum.xda-developers.com/showthread.php?t=398796 ) or swtos roms (http://forum.xda-developers.com/showthread.php?t=404977 )
look also:http://forum.xda-developers.com/showthread.php?t=414436
Other radio roms are crap....
2 ALL. My FM radio very very poor, allways noice & appear and disappear signal, in same moment - mobile phone samsung about 200$ give 100% better quality
any suggest ?maybe need forget to use radio in cruise ???
Hi Badguy,
Yesterday I tried to flash my pda, as you said, with the radio rom "http://www.4shared.com/file/46948092...a_1582123.html". the update ended up in 99% completeness. So now....I have the tri color error (so I cannot use my phone). Hopefully I will be able to restore it again.
You have any tips?
Michel
hi.
Yes i forgot to tell you, that u have to flash HARD SPL first, then u can flash any custom rom and any radio rom.
Now, u have to flash ur pda with original touch cruise rom, which will restore your pda to normal working mode.Original rom is on CD, which was in box, when u bought ur phone.When the iriginal rom is flashed, u do the hard spl, then u can flash any software made for polaris.
Hi,
Thanks for the info...I am not aware that I received any CD's with original roms.
If I have not received any CD with Rom on it, can I not just update the ROM with ,for example, Diamond r7 Rom?
I tried this, but I didn't succeed. Normally I connect the phone to my pc, then enter the 'bootloader mode (from hard SPL)' on my pda by starting up the bootloader on my polaris and then I run the new ROM from my computer. When I use this procedure, the ROM is updated. I used this procedure as well for this 'flash'.
Since I have now the permanent tri-color, and therefore cannot enter bootloader, how can I update my ROM to the original version (or to any other ROM)?
Any further tips?
Thanks!
Michel
ftp://xda:[email protected]_radio_sign_25.65.30.04_1.58.21.23_Ship.exe
U need this rom, This version u should get with the phone.But it doesnt matter now. just ON/OFF the phone, connect it with cable and pc. Start flashing. Then make hardspl.
Did u hear for flashing through microsd card?? All what u must do is:
1. U have to have memory card in mode fat32.
2. Put onto the memory card rom file. Usually is named something.nbh .You have to rename it to POLAIMG.nbh .
3. put the memory card into the PDA and u have to go to bootloader mode ( press the camera button, make soft reset with stylus and u have to press camera button all the time, until u get 3color mode.
Radio roms, splash screens, roms , all, u can flash with microSD mode.
btw http://forum.xda-developers.com/showthread.php?t=381600&highlight=microsd Its a MUST!!
Hope it works now.
badguy999 said:
ftp://xda:[email protected]_radio_sign_25.65.30.04_1.58.21.23_Ship.exe
U need this rom, This version u should get with the phone.But it doesnt matter now. just ON/OFF the phone, connect it with cable and pc. Start flashing. Then make hardspl.
Did u hear for flashing through microsd card?? All what u must do is:
1. U have to have memory card in mode fat32.
2. Put onto the memory card rom file. Usually is named something.nbh .You have to rename it to POLAIMG.nbh .
3. put the memory card into the PDA and u have to go to bootloader mode ( press the camera button, make soft reset with stylus and u have to press camera button all the time, until u get 3color mode.
Radio roms, splash screens, roms , all, u can flash with microSD mode.
btw http://forum.xda-developers.com/showthread.php?t=381600&highlight=microsd Its a MUST!!
Hope it works now.
Click to expand...
Click to collapse
Hi,
I have tried the above steps. I have downloaded the rom, upacked it and renamed into POLAIMG.nbh
I pressed the camera button all the time and performed a soft reset with stylus. The following happens:
1. The three color comes again (it says: POLA100, SPL-1.25.0000, CPLD-2; in the red part; also in the above right corner of the red part it says: RUUNBH).
2. Then it turns into a white screen with: 'Loading...'.
3. After that it says...'checking...'
4. After this it says:
"0025002
not allow"
Then it returns again to the three color with same text as above.
Do you know any tips to solve my problem? Hopefully you can help me!
Kind regards,
M
Here I am again.
I now concluded from the text in the red section, that I indeed don't have Hard-SPL on it. I think this causes the fact that it is 'not allowed''. Would you agree on this one?
This means that I need to install HARD-spl from the tri-color situation.
This is the next big challenge I think. Do you have tips for me? Hopefully we will [email protected]
Greetz,
M
badguy999 was trying to tell you that about 3 or 4 posts back. Yes you must HardSPL your device before you load anything other than the Stock ROM. Read and follow the following thread to hardspl:
http://forum.xda-developers.com/showthread.php?t=375338
also read this
http://forum.xda-developers.com/showthread.php?t=370434
hope this helps... good luck
mewsijben said:
Here I am again.
I now concluded from the text in the red section, that I indeed don't have Hard-SPL on it. I think this causes the fact that it is 'not allowed''. Would you agree on this one?
This means that I need to install HARD-spl from the tri-color situation.
This is the next big challenge I think. Do you have tips for me? Hopefully we will [email protected]
Greetz,
M
Click to expand...
Click to collapse
Hi,
I know that I need to install Hard SPL and I have read the threads you mentioned (before). The thing is, how can I install Hard SPL without the use of any active sync. In other words: how can I install Hard SPL by using the SD-card?
If you can help me with this...it would be great.
Michel
bkeaver said:
badguy999 was trying to tell you that about 3 or 4 posts back. Yes you must HardSPL your device before you load anything other than the Stock ROM. Read and follow the following thread to hardspl:
http://forum.xda-developers.com/showthread.php?t=375338
also read this
http://forum.xda-developers.com/showthread.php?t=370434
hope this helps... good luck
Click to expand...
Click to collapse
U cant. First u have to flash original rom to make the pda working again. Then u can install hardspl through cable. original rom can be flashed with microsd method.
Are u sure that u have memory card in fat32??Cause error u described few post before.
Hi,
When I want to flash it with original rom (rename the rom to POLAIMG.nbh, it starts loading, than checking, and than it says 'not allow....and a number' See also a few posts back. I formatted the SD to FAT 32
Somehow I'm not allowed to install the original rom. Therefore I thought that I needed to install Hard SPL.
Or should I press a combination of buttons on my phone? When I press the camera button and then soft reset, the same happens, when I just reset (he tries to load the image, but does not work).
I'm now allmost through all my options here. Hopefully somebody can help.
Greetz,
michel
camera problems
Hi,
as far as i understand the "cannot initialize" camera problem is a know HTC hardware problem and the only solution to it is to send the phone to HTC for board replacement.
(it might suddenly start working for some time - i saw reports that it happens , but than the problem will probably return -- there are lot of touch cruise users i saw with this problem and the only known solution i saw was HTC repair)
Is true that the polaris is "weak" phone. mine had trouble with connecting to 3G. And during calls, persons didnt hear me well and from time to time i was muted . So, they change motherboard.
Polaris has really weak signal strenght. Far far better signal i got from tytn2 and trinity.With regular radio rom...