Radio Update broke my MDA - MDA, XDA, 1010 Software Upgrading

Hello everyone.
Im having serious trouble with my MDA i updated just yesterday. Somehow it hung up at 60%. Waited for about 15 Minutes but nothing happened. So restart, but MDA was dead.
I managed it ti load the CE and ROM with an SD from another MDA into the broken one. Went well, the device boots, after 15 minutes, but everything goes very slow.
So managed it to upload the cab file of the RSU on another SD, inserted it, executed, but at 1% it just fails to flash and want to restart the MDA.
I also tested the method someone mentioned with the autorun.exe, didnt help.
In the wallaby bootloader i saw that there is an option to Backup the GSM ROM to SD, but then it wants some kind of "PC Monitor". Thought it might be some kind of hyperterminal connection, but turned out not to be.
So, does anybody here have a clue what to do???

GSM ERROR
Hello there
I've suffered the same problem as many others did.
I suggest one final solution before giving up and believing it's a dead motherboard.
the solution I believe is:
1- Using a working XDA and through the bootloader click on contacts button to get to the flash menu then click on the option for copying rom and GSM to SD.
2- after complete copy use the same SD card in your device (at bootloader)
3- tell me what you get..

Re: GSM ERROR
smiley said:
1- Using a working XDA and through the bootloader click on contacts button to get to the flash menu then click on the option for copying rom and GSM to SD
Click to expand...
Click to collapse
Gives me the already mentioned "Please connect RS232 and run PC Monitor" Screen...

If you are sure you have followed all procedure re: 1% screen of death mentioned in various threads in this forum, then you're best bet is to return the unit the your distributor/ service centre for repair.
I had this problem and posted my experiences on several threads. I spent the first 2-3 weeks trying different things without any luck. THen one day, I just return the unit the distributor and they repaired in two days. I was told they had to replace the GSM main board.
My problem was caused by T Mobile radio stack upgrade ( I did not use SD method, so the installation installed Tmobile radio stack on my 900/1800 xda. It worked fine until I accidentally 'checked' the 1900 option...
Just my two cents

Related

ROM was erased

HELP.... I was unable to upload my sx56 with the new 2003. I crashed my ROM... Any ideas on how to restore.
Rock
Tell me what you see from the display.
I can help!
Froozen SX56 while upgrading the ROM
Unfortunately my system crashed when i was upgrading my ROM this is for a AT&T SX56 Pocket PC which I wanted to unlocked so that I could use it with T-Mobile SIM card. Now the screen says :
Upgrading
It will take about 5 minutes...
I was trying to upgrade it with the xda-developer rom verison.
I dont have any backup also for this device please help and I do have a SD card and SD card reader also.
If the bootloader not be erased, you could still use SD to restore OS.
If the bootloader already damaged, the only solution is hardware solution.
I can help you to resolve all problems
How to restore using the SD please tell me.
I do get the bootloader mode when i pressed the power , navigator and reset button on the pda
shri62 said:
How to restore using the SD please tell me.
I do get the bootloader mode when i pressed the power , navigator and reset button on the pda
Click to expand...
Click to collapse
using Xdrit to write the OS to SD card via SD writer.
you can get Xdrit from xda-developers.com (do some search).
Need real help
cgigate said:
I can help you to resolve all problems
Click to expand...
Click to collapse
I had this stupid RadioStack crash that resulted in GSM ERROR that made my device unable to recharge the battery or run mobile function, so the status now is a ppc which has no phone and should always be conected to AC
when I consulted the Agent service tey claimed it's a motherboard error that would require a new baord, which'll cost me around 300$.
could you please help me!!
Cgaigate, is it possible to restore a corrupt radio stack using jtag, if you have the capability I can let people know.
GSM ERROR - RADIO STACK CRASH
Hi Smiley,
I crashed my Radio Stack, too. Has anyone an idea? Is it possible to repair? By myself?
I heard cgigate could help?
Bye
Yep - "GSM Error" in Wallaby Bootloader 5.15
Anyone got any ideas on fixing this one?
Cheers!
Andy

XDA1 Software upgrade.. now it wont power up

Hi got the xda1 rom/radio upgrade from o2 web site.
installed radio upgrade first, it then asked me to remove ac power, i took it off dockign station, it rebooted, asked me for a simlock.. to which there was no mention of in the upgrade instructions.. i turned it off and on, and now it wont even boot up.. comes on with 02 logo.. then a white screen with blue banner at top..
what can i do to fix it??
i cant even see it on the pc!!!
please advise, i really hope i have not broken it.
can o2 do anything?
i can get to the bootloader by holding down power when soft resetting phone.. comes up with gsm error...
then nothing....
i can get to other menu about sd backup ect if i hold down the two buttons at top of unit when in bootloader.
how do i go about repairing the radio and rom ??
is it possible?
bootloader
ok, i can copy the rom ect from xda to sd card... and even copy it back over again.. so if i put the sd card in a reader on the pc.. and put a good rom and radio on it.. will it work ok booting off the sd card?
i can get to that menu from the bootloader..
You need to get a working rom installed then try to address the gsm error, I never heard of an xda asking for sid code when doing an official upgrade. Did you leave your sim card in the xda when it was updating the radio stack? You may be aware from reading on the forum that radio stacks once corrupted are very difficult if not impossible to rectify. I would suggest unpacking the rom you downloaded, burn just the ce part to rom using sd/bootloader method, then try to install gsm again, this time without sim inserted, you will find here on the forum the instructions to burn gsm from sd card, do this after you have a working bootable system. Good luck.
yes., the sim card was in the system at the time.. its an 02 sim card however, so i guessed this was ok.
printed out the 10 page instructions on how to upgrade s.ware so there was no problems (like this)
the radio stack was installed before the rom if that makes any difference?
is it possible for the xda1 just to lock up like this without having done it the way i did?
perhaps it would have done this anyway??
just thinking i could bring it back to place i got it at and not inform them of the s.ware upgrade that caused the problem to see if they can replace it or something...
just an idea, coz at the moment im kind of stuck.
Hi ...
If you managed to reinstall the ROM through SD card, does it mean you have a bootable system but the RSU doesn't work ?
If so and you can access the XDA from Activesync, then you may locate the 4 files of the RSU upgrade from the \windows\startup directory ... delete them then a hard reset may flash the original RSU back if it's not screwed up.
it should be possible to flash the rom via sd, as i can dump the faulty one to sd and then back over.. so, that part of the bootloader works.
ill ring the place ig ot it at and see what they can do, as it just "went off, all by itself"
i would try the sd flash myself but i aint got a card reader for sd.. just smart media.. lol
it doesnt sound as bad as some peoples s.ware problems however, as the bootloader seems to work ok.,. so fixing it may be possible, but ill give place i got it off a ring first.
thanks for all the info.
If it is under warranty and using the official flash upgrade destroyed the gsm radio stack then O2 should repair or replace. Radio stacks are very difficult to repair and people have asked about getting it fixed only to be told the mainboard needs replacing at huge cost.
thanks for the info, i got a sd card reader, but when i put the thing into pc it asks to format it so it wont read the stuff ive dumped from xda to the card..
oh well, ill give these guys a ring to see what they can do.
where can i get hold of the files to put to the sd card?
ive got the rom/radio files, but they are pc exe`s and not seperate files..
well, i got it flashed ok using official 3.17 s.ware via sd card..
on powering up, it still fails, just white screen with blue top, although there is a keyboard icon on the bottom right which was not there before.
still get gsm error on bootloader..
if only there was a way to put new radio stack on it via sd
djkus said:
well, i got it flashed ok using official 3.17 s.ware via sd card..
on powering up, it still fails, just white screen with blue top, although there is a keyboard icon on the bottom right which was not there before.
still get gsm error on bootloader..
if only there was a way to put new radio stack on it via sd
Click to expand...
Click to collapse
Dead phone, you need send service center to repair, or to me

Im so scared...!!

I just bought a t-mobile wallaby from here in india, And i decided there was a update available after 3.14 or something. so i ran it. But it stopped in the middle. Said 20 min but waited an hour. Then i took the xda of its cradle and did a hard reset... Now all it does is switches on and show t-mobile and the light stay on...nothing after that. I think i really messed it up. Gave it to a guy who said he could fix it but now 4 days later says he cant. Really need help on how to do it myself Please. Please help me, cant throw money away like that......can some show me step by step instructions as i am stupid with upgraded or reinstalling this device.
why have you decided that you could upgrade your device if you don't understand anything to upgrading and its consequences.
Upgrading is *dangerous* for dummies.
You are the weak link[/list]
mananmistry said:
I just bought a t-mobile wallaby from here in india, And i decided there was a update available after 3.14 or something. so i ran it. But it stopped in the middle. Said 20 min but waited an hour. Then i took the xda of its cradle and did a hard reset... Now all it does is switches on and show t-mobile and the light stay on...nothing after that. I think i really messed it up. Gave it to a guy who said he could fix it but now 4 days later says he cant. Really need help on how to do it myself Please. Please help me, cant throw money away like that......can some show me step by step instructions as i am stupid with upgraded or reinstalling this device.
Click to expand...
Click to collapse
:x Forget what this guest just said we are a community who help each other out :x
I am now using the XDAII but when i had the XDA1 i had a similar problem. Got stuck upgrading. Hang onto your horses dude your device isn't dead so breath a sigh of relief. If you have a SD/MMC Card reader then use it to burn the base Rom from
http://lumpistefan.dyndns.org and then install it through the boot loader(Hold the Power button and then press the soft reset button using the stylus(you will enter the boot loader mode and then follow the instructions on how to install the Rom.
------------------------------OR--------------------------------------------
Go to a shop or a friend who had similar device, make sure you have a SD/MMC card with you and then enter the bootloader mode as described above and then copy the ROM on the SD Card. Then insert the card in your device and again enter the Boot Loader mode and Copy the Rom from the SD Card to your device after you are done press the Hard reset button on your device to switch it off keep it off for atleast 60 sec before pressing the hard reset button again to switch it on. Your device will live again.
[/b]A WORD OF ADVICE
Don't touch the Radio Stack on either your device or the other one. Always select Rom only.
If you need further help with using the bootloader search these forums you'll come up with alot of info.
Let me know how it works out
one question
Thanks for the advice.....your must be the better part of the site.
what happens if i cannot get into the boot loader.
thanks again
Re: one question
mananmistry said:
Thanks for the advice.....your must be the better part of the site.
what happens if i cannot get into the boot loader.
thanks again
Click to expand...
Click to collapse
I believe there's a way to go-back! Do a flush by pressing on the power button+the hard reset+the navigation button pressed. All at once and that's how you go-back to the original ROM. Let me know if it works and if you dare to do it anyways.. 8)
guest said:
why have you decided that you could upgrade your device if you don't understand anything to upgrading and its consequences.
Upgrading is *dangerous* for dummies.
You are the weak link[/list]
Click to expand...
Click to collapse
Mr. Guest you are an idiot, many of us have been at this point one time our another. This is no way to respond to a forum member in need of help.
i'm no techie when it comes to these things but just out of curiousity WHAT causes the upgrade to stop? mananmistry said he was in the middle of upgrading already; is it the rom he used or is it the connection (power flux, cable, sync, etc)? just curious... :wink:
oh and its beers for the others and the loo for the guest
update
now the thing is i got the phone back. I have connected the usb but pc cannot find device and xdatools or the rom .exe files wont install. it says "xda not found via activesync", something like that. I went into the boot loader and it said GSM ERROR and stops. have to press calender key to get into sub-menus. what is the problem. does the rom kitchen .exe files need sactive sync to be present. please can some one tell me.
do i need a sd card reader. can i not just use someone phone to put my sd card and burn onto sd...??
You are now in serious trouble, the GSM error often proves fatal for the phone. You can still flash the rom though by following the previous instructions. After that is completed you will have to try flashing a radio stack. Please be prepared to be disappointed, I wish you the best of luck. The good news is that even if the phone doesnt work you should still have a working pda.
Where can i get a radio stack rom...???
Click to expand...
Click to collapse
where can i get a radio stack rom....will try...
If my gf has a pda with sd card can i use the unit to see the sd card and write the rom on it???
Re: update
mananmistry said:
now the thing is i got the phone back.
Click to expand...
Click to collapse
how did U get the phone back 2 work (bootloader)
thanks
:?:
get a radio stack from here
http://lumpistefan.dyndns.org/tools/

HELP: No Bootloader after BigStorage Flash

hello guys, i'm really desperate now. my Magician is dead. i followed the laid out procedure 100% for upgrading to bigstorage. that's what i did:
- dump rom on to the sd card (512MB).
- got a external card reader (since the one in my laptop did not work with ntrw.exe)
- killed ActiveSync (wcesmgr)
- dumped the rom to my hard disk
- got Big_ROM_Ger_1.11.nb1 from ftp
- changed the first 416 bytes with ultraedit.
- wrote the resulting rom to the sd card with ntrw.exe.
- flashed (got the question in bootloader mode, pressed power).
- flash completed, got the 100% message and checksum failure.
- did a softreset
- my Magician is now DEAD !!!
Tried to put it in bootloader mode again, nothing! Put out the battery, unplugged and replugged usb cable, nothing!
PLEASE, any suggestions or help ??????
Please explain "nothing." Are you getting anything on the screen, blank screen, backlit, logo, text, anything?
Can you zip and upload your modified ROM dump file to dropload, rapidshare, or some other portal where someone can take a look?
Did you pull the battery completely, reinsert it, and pressed the reset+camera+power to get back into the bootloader?
BeyondtheTech said:
Please explain "nothing." Are you getting anything on the screen, blank screen, backlit, logo, text, anything?
Can you zip and upload your modified ROM dump file to dropload, rapidshare, or some other portal where someone can take a look?
Did you pull the battery completely, reinsert it, and pressed the reset+camera+power to get back into the bootloader?
Click to expand...
Click to collapse
the screen is absolutely blank. if i plug in the power cord not even the charging lamp is on.
i removed the battery completely for a few hours now, reinserted it just that moment and pressed reset + camera + power --> blank screen, no backlit, no logo, no text. i even used my torch to make sure i didn't miss the bootloader message. nothing.
when i press the reset + camera + power button the blue led blinks for a split second but then again nothing.
tried it with and without external power....
any clue????
rom i used
BeyondtheTech said:
Please explain "nothing." Are you getting anything on the screen, blank screen, backlit, logo, text, anything?
Can you zip and upload your modified ROM dump file to dropload, rapidshare, or some other portal where someone can take a look?
Did you pull the battery completely, reinsert it, and pressed the reset+camera+power to get back into the bootloader?
Click to expand...
Click to collapse
you can finded the zipped rom i flashed here:
http://62.218.22.81/MagicianRom/[/url]
Sounds like you have screwed it completely. Back to the shop...
saldous said:
Sounds like you have screwed it completely. Back to the shop...
Click to expand...
Click to collapse
well, could be possible.... kinda teaches me not to mess around too much. i flashed my old xda II with magneto and all, never had any problems....
anyway, i will try to clear the backup battery over night and try it again tomorrow. if it still doesn't work, i'll get it back to the shop. it's brand new (2 weeks), so i guess (hope) it shouldn't be a problem.
No solution - but I had the same problem
Hello,
sounds that you have exactly the same problem I had. I also wanted to use bigstorage. First I updated to 1.06 official rom from T-mobile Germany. Then I used mksbigstorage to modify this rom. After installing this my mda was stuck at the splashscreen. But the bootloader still worked so I was able to restore my original rom.
Next I downloaded the 1.11 extended german rom from xda-developers ftp-server. I also replaced the first 416 bytes with the one from my rom. After installing this rom and doing a softreset my device was completely dead. No bootloader, no even a blinking light when connecting it with the power supply. I also tried to remove the battery for some time. But nothing worked. As I also had this device for just some days I finally did send it back and recieved a new one.
On this new one I also tried to modify rom 1.06 with mksbigstorage. But after that it was again stuck at the splash-screen. Mksbigstore seems not to work on this rom. Finally I was able to use bigstore by modifying two adresses in the original 1.06 rom downloaded from my device. This method is described in this forum. Worked without problems.
So I do not know what went wrong and I am sure I followed the instructions for flashing bigrom exactly, but as I am not the only one with this problem there is a risk flashing under certain circumstances.
7bft said:
saldous said:
Sounds like you have screwed it completely. Back to the shop...
Click to expand...
Click to collapse
well, could be possible.... kinda teaches me not to mess around too much. i flashed my old xda II with magneto and all, never had any problems....
anyway, i will try to clear the backup battery over night and try it again tomorrow. if it still doesn't work, i'll get it back to the shop. it's brand new (2 weeks), so i guess (hope) it shouldn't be a problem.
Click to expand...
Click to collapse
I had the same problem flashed XDA 1 hundreds of times without problem. Flashed Magician device one time --> same problem as you have.
I've sent my device to repair center and they installed a new motherboard. So i don't believe that tehre is any fix to relive you're device..... :-(
Stefan
I don't see anything wrong with the ROM file except for the fact that it's slightly larger than my ROM (65281k vs. 65427k). May have been a bad write to the SD card. Was your card a 64MB SD card?
BeyondtheTech said:
I don't see anything wrong with the ROM file except for the fact that it's slightly larger than my ROM (65281k vs. 65427k). May have been a bad write to the SD card. Was your card a 64MB SD card?
Click to expand...
Click to collapse
My card was a 512 MB SD Card, since it is the only one I have.
On Monday I'll send it to the service center
Re: No solution - but I had the same problem
beta2morita said:
Hello,
.... I also tried to remove the battery for some time. But nothing worked. As I also had this device for just some days I finally did send it back and recieved a new one.
On this new one I also tried to modify rom 1.06 with mksbigstorage. But after that it was again stuck at the splash-screen. Mksbigstore seems not to work on this rom. Finally I was able to use bigstore by modifying two adresses in the original 1.06 rom downloaded from my device. This method is described in this forum. Worked without problems.
...
Click to expand...
Click to collapse
Thanks for your response, kinda reduces my pain and asures me that I'm not a complete idiot....
I'm now pretty sure that I have the same problem as you have and that sending it to the service center is my only option....
At least I can use my Himalya with Magneto a few more days :wink:
I guess I will not try this again since I don't want to risk killing it again, allthough I allready had problems with the storage size on the working device (tomtom).
One more question: Did anybody ever had problems on upgrading from a t-mobile rom to a vodafone rom? is it even worth upgrading to 1.12?
Thanks for your help guys!!!

[Q] Please Help - O2 xda Orbit is dead - ROM problem

Hi there, I've been reading the forum for about a week trying to find a fix for my deceased orbit xda.
Problem started when the phone started crashing, the screen was going white and needed re-starting. Eventually it failed to load and froze at the blue screen with the red writing!
so I started reading and tried soft and hard re-booting to no avail.
I have managed to get the phone into bootloader and connected a USB
it recognises the usb and installs as a mobile device on my laptop but here's where it gets tricky. I dunno alot about phone's and am struggling to understand some of the processes. I have tried booting off the SD card but it said invalid certificate (i used the artiemg.nhb file from rapidshare)
I have all the original paperwork and cd's for the phone but dont know what or how to flash a ROM.
what do I need and more important how do I do it without all the tech talk.
Its a WM5 phone - thanks
EDIT - Just to clarify, have just tried the romupdateutility on raving_nanza's sig but recieve an error - am running vista on my laptop
Update, I managed yesterday to get the phone to boot from the SD card and indeed it flashed it and WM5 is back up and running, the new problem is its network locked (to O2 i presume). I was using this phone on orange previously without an issue????
any Idea's other than paying imei check?
...
danv6saxo said:
just tried the romupdateutility on raving_nanza's sig but recieve an error - am running vista on my laptop
Click to expand...
Click to collapse
what link was it?
what error did you have?

Categories

Resources