Database Users

how do i backup my rom on xdaII

how do i backup my rom on xdaII

I'm not entirely sure anyone has actually done this; (I've asked several times).
If you follow this link, I mention some articles I had found about backuping up the ROMs, but I don't know if anyone has done it. (Its on the second page or so...)
http://www.pocketpcpassion.com/forum/showthread.php?s=&threadid=38598
Which device do you have? If its an iMate running ROMs 1.03.00 USA I would love to get a copy if you figure out how to restore the roms, (there are several roms to backup the OS, the Radio Stack, and the Ext_Rom)...
Good luck,
BTW: If anyone has already done this, could they please share these files, I would like to revert back from the 1.06.01 to 1.03.00

http://forum.xda-developers.com/viewtopic.php?t=4608

Help with charmer

Hi,
I seem to have made my MDA compact II a brick. I was having problems hard reseting it (Format FAT failed) so I tried upgrading to a different firmware.
I now have the RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID
firmware on it. This is not good as it is for the Prophet, although it says in the Wiki that this should work. Anyway I can now hard reset the phone, so all I need to do is flash the TmobileUK firmware back on it. The only problem is that it doesn;t let me do it. It says error:296 upgrade only.
Anyone any ideas?
cheers.

extract the contents of the t mobile package using win rar
download
ftp://xda:[email protected]/Prophet/Tools/ROMUpdateUtility-NoVendorID.zip
and put in the same directory and run.

It gets to 1% then says invalid command, not for this phone.

Latest T-Mobile ROM is at http://www.tm-phonedownloads.com/download_manager_mda_com2.html
very stable, much better than the original shipped ROM

Finally got it back.
If you have a T-mobile MDA II (Charmer), then Flash it with a Prophet ROM, the only way I could get it back was to use the following:
RUU_Charmer_100_100_049_CHS_Ship.rar
typho5 -x nk.nbf
Then created a new nk.nbf with the output using nb2nbf.
I then Flashed this with Wizard_RomUpgradeUtility_noID
And miracle it started. I quickly CID unlocked it and am now flashing with latest T-mobile.
My problem was that the Rom Update programs wouldn;t read version 2.xx ROMS.
Anyway it has just finished and looks fine. Thanks for everyones help, now I just have to get my SD wifi card working.

How do you do it
Hi I just got a MDA compact II from T Mobile UK I would like to upgade the ROM but its all very new to me since you know what you are doing can you post an idiots guide to the process.
Hope you can help

Hi, it depends what Rom you want to upgrade it to, the latest one from T-mobile is pretty good. There is an unbranded one (no T-mobile logos or suchlike) or there are Roms in different languages. It depends why you want to change the firmware and what to.

I suppose I don't really know the problem is as I just got the thing did some searching and came across this site read your post and thought i want to do this maybe you have some suggestion. Also I tried the RUU mentioned in an earlier post but it I can't update when I get to the from/to screen it tells me I will go from 2.6.2.110 to 2.6.2.110 I was expecting to move up.

daveh1171 said:
I suppose I don't really know the problem is as I just got the thing did some searching and came across this site read your post and thought i want to do this maybe you have some suggestion. Also I tried the RUU mentioned in an earlier post but it I can't update when I get to the from/to screen it tells me I will go from 2.6.2.110 to 2.6.2.110 I was expecting to move up.
Click to expand...
Click to collapse
Sounds like you are running the latest version. Is there a problem with the phone? If the phone works fine, I would just unlock it using lokiwiz02b (So you can use any network card) and then EnableRapi (So you can run unsigned code) then CID unlock it using awizard (so you can use any Brand/Language of ROM).
If you have no problem with the firmware I would leave it alone.

Hi,
Yep, I'm in the same situation, why does the prophet firmware load onto the charmer without erroring? !!!
Anyway, I have a copy of RUU.rar but I'm having problems working out what I need to do to it between unpacking and flashing the phone (i.e. the typho5 bit and then the nb2nbf).
Can someone please help me out?
P.S. The phone just sits at a black screen that says 'Dopod' across the front at the moment

Can anyone tell me how to 'force' a downgrade of firmware? I've got what appears to be the right firmware from FTP but it won't over write the incorrect version 2 installation as the uploader software thinks it's later therefore better.
There has got to be a better option from the command line surely?
HELP phone is dead

Chirpy said:
Can anyone tell me how to 'force' a downgrade of firmware? I've got what appears to be the right firmware from FTP but it won't over write the incorrect version 2 installation as the uploader software thinks it's later therefore better.
There has got to be a better option from the command line surely?
HELP phone is dead
Click to expand...
Click to collapse
Progress, but now it works only from the charger so the shipped ROM upgrade won't work as it reports the battery as being at less than 50%.
Anyone know how to force a ROM upgrade or where I can find the right ROM files to use awizard to do this?

Dutch to english ROM

Hey guys,
Im another newbie, but who is actually scared of screwing up the phone. I have the Tmobile MDA compact III obviously, and the information page looks like this:
ROM version 1.13.114.1 NLD
ExtRom version 1.13.114.101
Model nr ARTE 110
CPU OMAP850
Im not so sure what this information tells you people who are knowledgable about this, however can I safely use the customised powermap file from this website's ftp (ftp://ftp.xda-developers.com/Artemis/Customized_ROMs/) to change the phone to english?
What are the procedures EXACTLY please, and what problems should I expect.
Another thing, what is CID lock, and how can I see if mine is or not?
I checked most of the threads, so I am knowledgable about this issue a bit, however because none of the topics were specifically about the Dutch version I wanted to make sure. Thank you a lot for your help...

1. you have to CID unlock your phone. only real solution is imei-check website, and that will cost you $40. this will prevent MANY of the problems with installing ROMs
2. don't do updating on Vista PC, use XP or older
3. follow on screen instructions of your chosen ROM update utility. don't panic if it takes too long and looks like the update process has "freezed". make yourself a coffee and let it finish installing.
4. enjoy!
PS... i strongly suggest you read as much as you can on this forum before doing any upgrading.... then you'll know what to expect.... and of course, don't forget that only YOU are responsible for anything that happens to your device, good or bad... good luck!

hey dim4x4,
thanks for the post, I appreciate it. However is the exe file I mentioned (customised power map) the right one? i know there are a few options to chose from, like the 3 options of the pdamobiz.com website. While im not too clear of the main differences, the general concensus on the forum is that the powermap is preferred, and has a lot of nice things. Is there a better one? perhaps on a different ftp. Maybe if you have one you can send it to me.
Another thing, if it dont work, or works and I dont like it, can I get back to my original ROM, the dutch one from the tmobile dutch file on the ftp site as well?
Thanks

1. Personally, I use PDAmobiz Lite version. Powermap version has a map of Thailand which I don't need. "A lot of nice things" for my purpose is a lot of unnecessary stuff. If I need something I can install it myself into RAM or storage card. You have to choose the version which suits you best.
2. Everything is on this server. You have to register to log in http://www.wm-gurus.com/registration/signup.php
3. I went back and forth with different ROMs (versions, languages, etc.) without any problem until I found more or less what I want. Please note, my device is CID unlocked by imei-chek.
Good luck!

Urgent Help
I tried the powermap version of the ftp. This is exactly what I did:
I connected the phone and established contact through activesync, then I started the exe file. The DOS windows opened, and then it started initialiying, and the process started. It said that it will take 15-30 mintues, and the process has started. So far im sure everypone is familiar with those. However, I waited about 35-40 minutes, and still nothing different on either screens. The DOS window said however that if nothing starts I should reset the process. I tried but didnt work. At that time I tried to reset the phone and now it is stuck in the startup screen. All I see on it is the IPL/OS data, and it is not moving further.
Please help, what do I do now?

So this is what I did so far....
1. Flashed with PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap.exe (with device on Today screen)
2. The process started and stuck on "uploading file [don't remember] and as the instruction said I reseted the phone after 30 minutes.
3. All there is on is T-Mobile splash screen, version infos and that's it.
5. Tried to flash again in bootloader mode but the device was not visible by PC
How do I go from here? Maybe I need to flash the original rom version of the phone. I have the dutch tmobile mda compaxt III, but with the dutch ROM version on the ftp of this site is scary, because there are too many files and have no clue which one to flash.
Any suggestions?

There is no Dutch T-Mobile ROM available yet.
You could try the English T-Mobile ROM (art_tmouk_11311001_024990_wwe_ship.exe), which is available on this site: http://www.wm-gurus.com/registration/signup.php
There's a chance this ROM will work on your Dutch T-Mobile phone, if the signature is correct (I assume your phone is still CID locked).
Read this link http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets on how to enter the bootloader of your phone.

mRmAGIC...
I Tried That Already; But I Got An Invalid Id: So I Dont Know What Else So Far: Do You Think I Have To Cid Lock The Phone To Be Able To Try The Other Versions?

tghobar said:
I Tried That Already; But I Got An Invalid Id: So I Dont Know What Else So Far: Do You Think I Have To Cid Lock The Phone To Be Able To Try The Other Versions?
Click to expand...
Click to collapse
CID unlocking isn't possible if your phone isn't working.
If you don't have your original rom, you have to contact your provider to repair it.

try from bootloader screen
Hi I also did as u did but with a hards reset in the beginning.And it worked fine.read somewhere that if u dnt do a hard reset you could get into problems.If u can try to go to bootloader screen and try to flash from ther.

flashing from the bootloader screen gives me an error, the file cannot recognize that a phone is connected to the PC. that is the biggest problem I think.
DO you know how to flash the Tmobile NL version on the ftp. there is one that I dont know how to use

How do I backup from a rom dump?

Hi guys. I have a problem:
I don't want to have any warranty problems, but I don't want to use WM5 either. Vodafone gave me refurbished prophets several times, even after I had flashed AKU3.3 on it, the red theme was enough for vodafone, they didnt ask for a original rom, but I don't want to mess with my luck, so I thought it would be a good idea to have a WM5 rom backup ready:
I made a backup of the rom with the grab_it tool, but I have no idea how to convert it into a flashable format, like nbf.
I tried the "r2sd all" command on a jumpspl'd phone (mtty 1.1/1.42 and trueterm, none of these did work), but it gets stuck after some time, so that doesn't help either.
Dumping with aWizard didnt work the last time I tried it. The os was there I think, but without the bootlogo. And that isnt that great either.
Sadly Vodafone made xda-developers remove their rom backups from the ftp server. damn you vodafone .
So How do I get now get a backup of my rom? I can't hardspl it, because I need a backup of the 2.15 spl too and I dont know any other way to cid unlock my phone.

Bricked/Blind/Barely alive magic, no recovery screen (SPL ****up) any suggestions?

Hi
similar to an other thread here if tried to change my SPL
and never recovered.
I can still get the blue led going using TrackBall + EndCall buttons.
The orange led lights up when I connect the usb cable.
But I cannot see it from the pc in any way (adb/fastboot).
there is some life in it but not a lot, have not seen the screen light
up at all.
Would it be possible to get a new bootloader/spl on it? Perhaps using
some kind of automatic update mechanism that is build in using an
update.zip file on the sd card?
Any help is more than welcome.
abe

*bump*
hmm, post needs al least 10 chars... should be enough now...
Has everyone also drawn a blank on this?
abe

Try downloading the ruu from your phone's official reseller.

T-Mobile USA standard OS.
Assuming that you backed up using Nandroid or something to SAVE and STORE your originally packaged Android 1.5 (Cupcake) version from T-Mobile...you NEED to restore that properly using a recovery image. Amon_RA has a great one, so does Cyanogen, obviously by now I'm sure you're aware. But keep in mind, to get back to that state...you must be careful not to alter any necessary files on that standard OS.
Do some Google searching and try to track down a Cupcake 1.5 download from one of those sites that leaked it or something. That's your best bet. Right now you don't need to be worried about continuing on from where you are. You need to backtrack and begin anew.

Sorry to hear that. I was thinking of installing Haykuro Apps to SD ROM and it needs to change the SPL. But I think not worth taking a risk.
Can you tell a little bit more which ROM were you planning to install?
Which SPL did you update to?
Which ROM did you have at the time of SPL update?
Which thread or instructions did you follow if any?

Hi
@mrjunix
I have a google ion, and therefore cannot return it unfortunately to the
carrier, as there was none. I went to the Google IO conference but
I am back in Europe and there is not support here.
btw what do you mean by RRU??
@Reignzone
I do have a nandroid backup but I cannot get back into recovery mode,
or fastboot mode or anything... the pc does not recognize it either.
@technicolor
I installed the Cyanogen recovery image and was able to install
one of his rom's. It worked fine but then I wanted to install
a Hero rom and I wanted to update the SPL.
Used the cyanogen recovery to update the spl using an update.zip
file. the phone restarted the "android" update screen came on
briefly and it never came back on...
changing the recovery rom should not be an issue,
and normally I think you do not need to flash your spl at all any more.
you can do a lot with the fastboot mode and one of the recovery roms
mentioned by Reignzone
abe

Reignzone said:
Assuming that you backed up using Nandroid or something to SAVE and STORE your originally packaged Android 1.5 (Cupcake) version from T-Mobile...you NEED to restore that properly using a recovery image. Amon_RA has a great one, so does Cyanogen, obviously by now I'm sure you're aware. But keep in mind, to get back to that state...you must be careful not to alter any necessary files on that standard OS.
Do some Google searching and try to track down a Cupcake 1.5 download from one of those sites that leaked it or something. That's your best bet. Right now you don't need to be worried about continuing on from where you are. You need to backtrack and begin anew.
Click to expand...
Click to collapse
This is the same advise you gave me yesterday on my bricked MT3G, but if you can't enter recovery mode, a nandroid backup ain't gonna help much, is it?
Also, any cupcake downloads are not going to help either, if you can't fastboot or enter recovery.
I appreciate you trying to help, but if you pay attention to the OP (and my own post), you'll see that your advise isn't going to solve anything.

For starters:
My advice to have those of you who are in need to take an approach that allows you to backtrack you work. Perhaps you left out various details of your issue or process taken in order to end up where you're at.
Your bitterness isn't appreciated for my having misread the problem.
YOU are the one with the F***** device, not me.
Anyway, all that aside; you might try to read-up on various threads that could be of some help. Google search, HTC support, ADB, etc.
There's always something to be done.
Good luck.

abeman said:
Hi
@mrjunix
I have a google ion, and therefore cannot return it unfortunately to the
carrier, as there was none. I went to the Google IO conference but
I am back in Europe and there is not support here.
btw what do you mean by RRU??
Click to expand...
Click to collapse
forum puffering aside, RUU is ROM Upgrade Utility
Prepackaged programs that bypass the phone's software altogether to reflash the rom
My carrier is Rogers of Canada and I have their "HTC Magic" phone
Be warned that Rogers is intentionally altering their hboot to disable system changes, you may not be able to cook your os after using this rom update.
Their updates page
https://your.rogers.com/web_auth/techsupport.asp
has the update
http://downloads.rogers.com/wireless/products/htc/magic/RUU_Sapphire_Rogers_WWE_2.17.631.2_release_signed_NoDriver.exe