Database Users

WANTED: AT&T SX56 virgin ROM file

Can somebody please help me.
As I posted in this post, I scr3wed up my buddy's AT&T SX56.
I have got the thing past being dead, by putting a custom ROM on it.
However, I really need to get this thing back into AT&T mode, with either 2002 or 2003 on it. I will then upgrade to 2003.
Does anyone know where I can get a virgin AT&T ROM so that I can re-flash his system.
Thanks.
-=Nick=-

nickpoore said:
Can somebody please help me.
As I posted in this post, I scr3wed up my buddy's AT&T SX56.
I have got the thing past being dead, by putting a custom ROM on it.
However, I really need to get this thing back into AT&T mode, with either 2002 or 2003 on it. I will then upgrade to 2003.
Does anyone know where I can get a virgin AT&T ROM so that I can re-flash his system.
Thanks.
-=Nick=-
Click to expand...
Click to collapse
Check out Yorch.net

Okay, I'm making SOME progress.
Firstly thanks for the youch referral from kwlandry.
I had found the rom kitchens this afternoon while looking for solutions...
I'm busy flashing the ROM from SD for the umpteenth time.
It seems that whenever I flash the SX56 with an AT&T 30.09 ROM, then I get a hang on reboot.
I am currently trying the 4.00.05 ENG ppc2003 from yourch as it seemed to be non-specific (and a non-TMobile) one.
I seem to have the latest Radio stack (RA.33.02), and have been able to get a couple of ROM's to work.
Does anyone have ANY idea why the AT&T 30.09 ROM would fail in the same place every time? This is definately an AT&T unit, at is has the logo on the front. The phone was originally locked, but has been unlocked during the process.
I'm busy reading/searching the forum, but haven't seem to find this problem anywhere.
Thanks for ANY help.
-=Nick=-

I fixed many XDAs with your problem!
you could send the XDA to Siemens to repair/exchange.

Try flashing back to the original ROM via sd method then upgrading to wm2003.
You can get a copy of the 2002PPC ROM at siemens website. Cut & Paste the following link.
http://www.my-siemens.com/MySiemens...%2FMC%2FMC%2FSX56POCKETPCPHONE%2Fdesc,00.html
Extract the file to a directory, then use the XDA OSimage tool to write to SD card then use bootloader to write to ROM.
After a successful flash follow the same to upgrade to wm2003
You can also try this kitchen http://lumpistefan.dyndns.org/

BTW - the phone has to be fully charged. That might be the cause of your hanging issue.

I have posted this in answer to your other post, try using a diferent memory card for upgrade to wm2003, I had this problem when using an mmc memory card to upgrade to WM2003, it hung every time even though it seemed to complete correctly, I changed to a different memory card and had instant success.

Yes! I agree also. But, though "mmc" and "sd" cards are similar, in this case the process calls for an sd card. The size doesn't seem to matter, I use a 512mb, however some people have had issues with device detection. So, a 64mb card is recommended. Make sure it is formated before use. And again a fully charged phone is unlikely to have problems so save your battery till all requirements are in place. Also DO NOT DO A HARD RESET! untill you have a successful install. You could lose you GSM ROM.

Thanks for all the replies.
I have successfully flashed back to the original rom; I downloaded it from yorc.
Having got the device back up and running, I tried the upgrade to 2003 again; using the Siemens software in the cradle solution. Didn't work.
The battery was definately fully charged (90% or higher) at all times.
I will look to try another SD card, and see if that makes a difference, it just seems strange that the card works to restore WM2002, and either card or USB approaches to upgrading to WM2003 fail.
The card I've been using is a very generic 128MB MMC card.
Again, thanks to everyone for their suggestions.

Have SX56 - upgrade to 2003 - now fried

Newbie here...
Got a SX56 (used) and it was working fine. Saw that there was an upgrade to 2003 and like the moron I am, I jumped in with both feet. Now the device will only go to the initial screen where it shows the rom/radio versions.
I downloaded the tool, and tried to restore from SD but it still doesn't work.
My bootloader is v5.15 it seems.
At this point, I just want the thing to work again in 2002 or 2003. If someone has some ideas or a ROM image to go back, please let me know
dbrady

Maybe you´ve got the same problem than an other guy here in this forum. He have big problems to install WM2003 on his device.
Since you´re getting message of ROM AND Radio version it looks quite good.
I would suggest that you get a new ROM maybe from my kitchen (http://lumpistefan.dyndns.org and install it on your device using an SD-Card and the XDATools.....
HTH
Stefan

Thanks. I tried earlier but I wasn't sure what one to choose. I have an English Version SX56 that was sold through AT&T. It shows Wallaby Bootloader 5.15 now. It shows the correct rom/radio info for Win2003 but won't boot.
What version should I try? I'd like to get 2003 if I can, but would be willing to go back to 2002 to get a function phone again.
Thanks for all the help
P.S. - I was using Mozilla and it never actually downloaded anything when I tried.
Dean

Downloaded a new ROM - thanks - but same problem. Now the unit shows new ROM version but still never goes any further than the boot screen.
Any other ideas?

Steps please...
How did you load your new rom? Please post the steps so that we can try and figure out what went wrong.

Please help upgrade Prophet/ overcome CID (VendorID) error

First of all THANK YOU all of the Great Minds of XDA Developers for all the support and great work you do for us!
a lot of your work, support and software and advice has been priceless help!
Any way no ass kissing here, just wanted to say thank you. ...and ask for help. As you probably know, there has been a lot of problems and issues with Prophet. (and very little or NO support and from manufacture and from providers. and there is not much available from xda developers forum users on this device. Though there has been great amount of support on any other devices. which has made me a happy user of Magician. But to cut it short, PLEASE HELPPPPPPP with Prophet!!! I can't reflash my XDA Neo with new WWE rom due to CID (vendor ID) error! It comes with german rom and I don't read german but love the phone! (and stuck with 2 year contract!) I tried aWisard utility numerus times in hopes that it would work despite the design for different device. I tried all kinds of roms available out there with no luck. and ofcourse HTC or O2 wouldn't help in any way! (different O2 support
techs said to me that I couldn't flash my Magician with WWE rom becouse it would kill the device! And I had it flashed in all the possible languages!) Any way, my magician is now a history (sold) and my new prophet is great pain in a ass!
Do you guys think you could help all of the xda community (and unlucky suckers) out here and help us overcome CID error so we can update/change our roms? (and screw the HTC, Qtek, Imate and O2 for such a poor support!)
I would greatly appreciate it! and it goes from all of us!

hi aleksandr
Just go the link below and follow the instruction to unlock the CID.
I just upgraded my 818 Pro to JAMin ROM, run very smoothly.
http://forum.xda-developers.com/viewtopic.php?t=37386

Hi, thank you very much for the reply! I did try this option but I have a little problem with Wisard program. I ran all the commands, enabled rapi,backed up my rom, ran unlock CID command, it returned "success" line, but when I try option -w- to write new rom into my prophet and get to "select OS rom file" where it saids to enter numbers only I don't know what to enter in the command line since the program doesn't have any roms listed in the command line screen. I've tried entering the rom release number, I even tried renaming rom to a number and I have placed the rom nk.nbf file in all the possible folders including "rom" in the program directory. but stil, once I hit enter, the command line window shuts down. could you advise?
and I did put the aWizard folder and rom file in the root directory on c:... tried d: too... stil, no result

Hi Alek,
Try this....
You now have a device that is CID unlocked, exit aWizard and locate the downloaded RUU update you now wish to load to your device. You should not need to use aWizard to do the flashing, just use the aWizard program to unlock the CID from the device.
I too have a Dopod 818Pro and I successfully flashed it to the new I-Mate JAMin ROM. All I used aWizard for was to unlock the CID on the Dopod 818Pro then exited aWizard and just used the downloaded RUU update.
Regards,
voyager

Thanks voyager, I guess you're very fast typist :lol:
Hi aleksandr,
Did you did an ActiveSync with your Prophet first then run the aWizard? For me I just run aWizard to enable RAPI and unlock the CID on my 818 Pro. Then I just double click on the latest JAMin ROM exe file, it detect my 818 Pro without any problem.

ualvoyager said:
Hi Alek,
Try this....
You now have a device that is CID unlocked, exit aWizard and locate the downloaded RUU update you now wish to load to your device. You should not need to use aWizard to do the flashing, just use the aWizard program to unlock the CID from the device.
I too have a Dopod 818Pro and I successfully flashed it to the new I-Mate JAMin ROM. All I used aWizard for was to unlock the CID on the Dopod 818Pro then exited aWizard and just used the downloaded RUU update.
Regards,
voyager
Click to expand...
Click to collapse
First of all thank you guys for getting involved and helping! I really appreciate it!
well, I tried just to CID unlock it with aWisard, got "successful" message and then I ran about 10 different upgrades from different providers, qtek, Imate, etc, and still got the wrong vender message!

hey mamakap,
you're right on the fast typing, my fingers are still burning...hee hee
voyager

mamakap said:
Thanks voyager, I guess you're very fast typist :lol:
Hi aleksandr,
Did you did an ActiveSync with your Prophet first then run the aWizard? For me I just run aWizard to enable RAPI and unlock the CID on my 818 Pro. Then I just double click on the latest JAMin ROM exe file, it detect my 818 Pro without any problem.
Click to expand...
Click to collapse
I usualy ran after sync, since the aWisard said it has to be fully ran. I will try it now!
Thank you! hopefully with all of your support I'll get the nedded results! Thanx!!
ok, just tried enable rapi with active sync off, the aWisard reopened and reastablished connection, but it still not finding the rom file.
wait a minute, does the rom file has to be in .nbf format or .nba?!
I'm looking right now for Extend Tool (64HTC Extended ROM Tool) and will convert the rom rom to nba file and see what happends.
man, I wonder how it worked for you just running unlock CID command and upgrading with the upgrade file!

Alek,
You already unlocked the CID from your device did you not? Your first post said you got a success message.
Put your device on the cradle or plug in the usb cable. Let ActiveSync do its thing then after the sync just double click on the RUU update you want to install. Follow the install wizard (NOT aWIZARD) of the RUU update. You do not need aWizard any longer to update the ROM, just use the RUU update you downloaded.
post if you need further help.
voyager

ualvoyager said:
Alek,
You already unlocked the CID from your device did you not? Your first post said you got a success message.
Put your device on the cradle or plug in the usb cable. Let ActiveSync do its thing then after the sync just double click on the RUU update you want to install. Follow the install wizard (NOT aWIZARD) of the RUU update. You do not need aWizard any longer to update the ROM, just use the RUU update you downloaded.
post if you need further help.
voyager
Click to expand...
Click to collapse
I've tried that several times and its still returnes the error!

Alek, one more thing ... you do realize that by doing this, you will wipe your device clean (hard reset) and you will need to load everything from scratch. If you use a back up program like Sprite or SPB backup YOU CAN NOT USE THAT BACKUP once you do this!!! You will be loading everything from scratch.
Just letting you know!!
voyager

OK Alek,
Tell me EVERYTHING you have done up to this point. I need to know what device you have, what ROM is currently on it and what ROM you want to flash with. Give me 5-10mins and I'll check back....lets try to get this resolved for you tonight.
voyager

yep! I do know this.. thank you though! I had an experience with Magician on that but I guess it's not much help with prophet though!
I haven't installed anything on this device yet.. just played with ExtRom, unlocked it and deleted O2 staff out of it just to see if I can do it But I do want to get the right OS in here first and then I'll worry about the rest of programs..

you guys wouldn't happen to have Extend Tool (64HTC Extended ROM Tool)would you? I'm visiting my family and I'm on my brothers PC dont have all my staff with me,and can't seem to find it on the XDA FTP

:?: What 64HTC Extended ROM tool are you referring to? If you're on your brothers computer do you have an ActiveSync connection to YOUR device? If so, is all synced up with your Outlook profile etc...?
First I need to know which Prophet you have (Dopod 818Pro, I-Mate JAMin or Q-Tek S200).
First let me say this, if you have a Q-Tek S200, I don't think you are going to be able to upgrade the ROM. I have seen several threads here that indicate that somehow Q-Tek S200 is permanently locked and that the aWizard program will NOT work on it no matter what, (or at least until some geneius here figures it out
Please let me know
voyager

ualvoyager said:
OK Alek,
Tell me EVERYTHING you have done up to this point. I need to know what device you have, what ROM is currently on it and what ROM you want to flash with. Give me 5-10mins and I'll check back....lets try to get this resolved for you tonight.
voyager
Click to expand...
Click to collapse
Hey, thank you so much! I really appreciate it!
ok, I have XDA Neo, German Version
rom 2.9.4.30 GER
rom date 2.14.06
protocol 413.1.03
ExtRom 2.9.4.120
First I have unlocked ExtRom with Wizards Utility
Then I tried to reflash the device to WWE rom with different upgrade utilities from different venders, tried Qtek s200,it didn't work, reterned wrong Vender ID error, then Imate- same result, then Dopod, using diferent RUU wizards, including Wizard Rom Upgrade Utility NoID.
still, no luck..
then I tried aWizard,
first I ran Rapi enable
second I made a back up of my own rom,
then Unlock CID,
then tried writing rom using aWisard, didnt work, aWizard doesn't finds any roms(and the program and rom are in the root directory of c
then tried just unlocking the CID and use Upgrade Wizards again, still, no luck!
tried praying, that didn't help either!
thinking about beer now! But I don't think that would help either
I did sync with PC and outlook.. activeSync4.1
I even tried flashing it with Danish rom, that I couldn't install it either..(I've read on XDA that flashing danish rom first than and only than I could try it to put WWE in to it. well, that didn't work either)
I tried running all possible rom upgrades that are available, and always got wrong vender id error.
even after aWizard reported that my rom was unlocked!
so I have no Idea what else I can try!
may be getting drunk and "sync it in the toilet"!

If we get this to work, you owe me a beer!!! OK, here's what I need you to do...
1) I tried researching this board for any signs of the O2 Neo being permanently locked like the Q-Tek S200, could find NOT anything. (edited, could NOT find anything)
2) Do you have a copy of the I-Mate JAMin RUU update on your brothers computer? If so great, if not, go get it. Try the latest one that came out yesterday.
3) Once you have this I-Mate JAMin ROM (save it to the Desktop for easy finding later) let me know.
4) Also, make sure you have ActiveSync 4.1 and it is set up and you have synced at least once with it. It doesn;t matter at this point what PIM info is on it since its going buh bye ina while, I just need it synced with a REAL partnership, not Guest.
Let me know when you have all these things done...
voyager

you've got the deal on bear! all you can drink! I'll bring you the german staff on my next visit to states!
any way, got it all! Imate jamin rom and sync has been done!

OK,
1) do a soft reset on the device. Once the device is fully up again, plug the usb cable in and let ActiveSync do its thing.
2) Open aWizard. Run the Rapi deal again. After that run the unlock CID.
3) If you get a success message after the unlock CID, CLOSE aWizard.
DO NOT UNPLUG THE NEO FROM THE USB!!! Let me know when this is done.

I found your 64HTC Tool:
http://buzzdev.net/component/option,com_remository/Itemid,100/func,fileinfo/id,196/

Dutch to english ROM

Hey guys,
Im another newbie, but who is actually scared of screwing up the phone. I have the Tmobile MDA compact III obviously, and the information page looks like this:
ROM version 1.13.114.1 NLD
ExtRom version 1.13.114.101
Model nr ARTE 110
CPU OMAP850
Im not so sure what this information tells you people who are knowledgable about this, however can I safely use the customised powermap file from this website's ftp (ftp://ftp.xda-developers.com/Artemis/Customized_ROMs/) to change the phone to english?
What are the procedures EXACTLY please, and what problems should I expect.
Another thing, what is CID lock, and how can I see if mine is or not?
I checked most of the threads, so I am knowledgable about this issue a bit, however because none of the topics were specifically about the Dutch version I wanted to make sure. Thank you a lot for your help...

1. you have to CID unlock your phone. only real solution is imei-check website, and that will cost you $40. this will prevent MANY of the problems with installing ROMs
2. don't do updating on Vista PC, use XP or older
3. follow on screen instructions of your chosen ROM update utility. don't panic if it takes too long and looks like the update process has "freezed". make yourself a coffee and let it finish installing.
4. enjoy!
PS... i strongly suggest you read as much as you can on this forum before doing any upgrading.... then you'll know what to expect.... and of course, don't forget that only YOU are responsible for anything that happens to your device, good or bad... good luck!

hey dim4x4,
thanks for the post, I appreciate it. However is the exe file I mentioned (customised power map) the right one? i know there are a few options to chose from, like the 3 options of the pdamobiz.com website. While im not too clear of the main differences, the general concensus on the forum is that the powermap is preferred, and has a lot of nice things. Is there a better one? perhaps on a different ftp. Maybe if you have one you can send it to me.
Another thing, if it dont work, or works and I dont like it, can I get back to my original ROM, the dutch one from the tmobile dutch file on the ftp site as well?
Thanks

1. Personally, I use PDAmobiz Lite version. Powermap version has a map of Thailand which I don't need. "A lot of nice things" for my purpose is a lot of unnecessary stuff. If I need something I can install it myself into RAM or storage card. You have to choose the version which suits you best.
2. Everything is on this server. You have to register to log in http://www.wm-gurus.com/registration/signup.php
3. I went back and forth with different ROMs (versions, languages, etc.) without any problem until I found more or less what I want. Please note, my device is CID unlocked by imei-chek.
Good luck!

Urgent Help
I tried the powermap version of the ftp. This is exactly what I did:
I connected the phone and established contact through activesync, then I started the exe file. The DOS windows opened, and then it started initialiying, and the process started. It said that it will take 15-30 mintues, and the process has started. So far im sure everypone is familiar with those. However, I waited about 35-40 minutes, and still nothing different on either screens. The DOS window said however that if nothing starts I should reset the process. I tried but didnt work. At that time I tried to reset the phone and now it is stuck in the startup screen. All I see on it is the IPL/OS data, and it is not moving further.
Please help, what do I do now?

So this is what I did so far....
1. Flashed with PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap.exe (with device on Today screen)
2. The process started and stuck on "uploading file [don't remember] and as the instruction said I reseted the phone after 30 minutes.
3. All there is on is T-Mobile splash screen, version infos and that's it.
5. Tried to flash again in bootloader mode but the device was not visible by PC
How do I go from here? Maybe I need to flash the original rom version of the phone. I have the dutch tmobile mda compaxt III, but with the dutch ROM version on the ftp of this site is scary, because there are too many files and have no clue which one to flash.
Any suggestions?

There is no Dutch T-Mobile ROM available yet.
You could try the English T-Mobile ROM (art_tmouk_11311001_024990_wwe_ship.exe), which is available on this site: http://www.wm-gurus.com/registration/signup.php
There's a chance this ROM will work on your Dutch T-Mobile phone, if the signature is correct (I assume your phone is still CID locked).
Read this link http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets on how to enter the bootloader of your phone.

mRmAGIC...
I Tried That Already; But I Got An Invalid Id: So I Dont Know What Else So Far: Do You Think I Have To Cid Lock The Phone To Be Able To Try The Other Versions?

tghobar said:
I Tried That Already; But I Got An Invalid Id: So I Dont Know What Else So Far: Do You Think I Have To Cid Lock The Phone To Be Able To Try The Other Versions?
Click to expand...
Click to collapse
CID unlocking isn't possible if your phone isn't working.
If you don't have your original rom, you have to contact your provider to repair it.

try from bootloader screen
Hi I also did as u did but with a hards reset in the beginning.And it worked fine.read somewhere that if u dnt do a hard reset you could get into problems.If u can try to go to bootloader screen and try to flash from ther.

flashing from the bootloader screen gives me an error, the file cannot recognize that a phone is connected to the PC. that is the biggest problem I think.
DO you know how to flash the Tmobile NL version on the ftp. there is one that I dont know how to use

Did i brick my Tmobile MDA? HEEELLLLPPP

Hey guys i tried flashing my rom using the Shelltool. I loaded the two cabs on the device and put it back to Tmobile 2.26. While i was in the shelltool it told me to do a hard reset and i think the phone was frozen (it didnt go to the normal colorful screen like usual) so i took the battery out of the back and powered it on. I left the software running like it said but it just froze up.
Now my MDA wont move past the Tmobile screen. I REALLY need a hand with this because this phone keeps my life in line! I dont even think ill be able to get up tomorrow because all my alarms go off my phone
Let me know if theres anything i can do otherwise im looking at a Motorola A1200 :-(
kind regards,
Eddy

Hi there,
Not familiar with Shelltool. I do most of my flashing using ActiveSync. Have you tried forcing the phone into Bootloader Mode (hold the Camera button while turning it on). Worth a shot.

If t-mobile was the original ROM on the phone, then just flash it again using the exe (or RUU if you extracted the files from the exe) instead of using shelltool and see if that brings it back to life.

well its stuck on the tmobile splash and shows no actual connection to the machine would it still work?

If you can get into bootloader mode then you should be fine. Just put your device into bootloader and flash wizard love rom or the rom that your device came shipped with.
Good Luck

looks like its working guys but its most likely still going to look and be WM5. Im still willing to try and get WM6 on it tho. I have the roms but its just not working any ideas?

Well, if you're flashing the t-mobile ROM right now then it is going to be WM5. Since you now know what to do if the ROM your loading doesn't stick, try flashing the ROM you were trying to flash again. By the way, what was your IPL and SPL before you flashed it the first time where it didn't work? If it was less than 2.xx then that was your problem most likely. If you're now updating to the latest t-mobile ROM the way I told you to (using the exe or RUU) then your IPL and SPL now should work fine with WM6.

Well I just finished upgrading my MDA to WM6. Here's what I did. First off I
fould out that you need the phone CID Unlocked for it to accept the WM6
ROM. Follow the instructions on this thread by Dr. Puttingham.
http://forum.xda-developers.com/showthread.php?t=285435
This should get your MDA ready provided it is a G3 (thread will tell you how
to tell the difference.) Then follow the directions on mfrazzz's thread:
http://forum.xda-developers.com/showthread.php?t=324632
I had problems with my MMS after the update but after re-installing the WM6
ROM and installing the CAB files by Lurch anf FZZF I got that problem
squared away. Believe me when I say I know what you are going thru. I
was fiddling around with this for about a week. Luckily I am on vacation and
I had plenty of time to read and decipher alot of the info I found. Good luck
and remember to READ, READ, READ. BTW, props to all that contributed to
these fine tutorials and for this awesome ROM. I have it running on my MDA
for three days now and am very happy with it. I am also using the 3.08
IPL/SPL which seems to give me better reception, which my wife seems to
appreciates